This commit just moves some code around. For sake of cleanliness
a new file is added to hold the entropy parsing functions
for Mbed TLS.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This is meant to be used only for tests on platforms where CSPRNG
sources are not available. It should not be used in production.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Improve the description of both MBEDTLS_PSA_CRYPTO_LEGACY_RNG and
MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG kconfig symbols.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
- Slightly improve the name of this kconfig adding the suffix
_POLL in order to highlight that this adds a callback
function used to poll data.
- Description was also updated to point out that this symbols
might not only use the (secure) entropy driver, but also
generic number generators, some of which are not really
secure.
- The symbol was move from Kconfig to Kconfig.tls-generic because
this is where MBEDTLS_ENTROPY_C is located and since
MBEDTLS_ENTROPY_HARDWARE_ALT depends on the former (it only
makes sense if the entropy module is also enabled), we add
also the "depends on".
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
ENABLED suffix does not really makes much sense for a kconfig
so it should be removed. Also other MBEDTLS symbols were recently
updated accordingly.
Moreover having it named exactly the same way as in Mbed TLS
symplifies the understanding of what this kconfig is doing.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Enable the `MBEDTLS_PEM_WRITE_C` mbedtls configuration option when
`CONFIG_MBEDTLS_PEM_CERTIFICATE_FORMAT` is selected.
Signed-off-by: Simone Orru <simone.orru@secomind.com>
Initial commit for entropy support on RA8
- drivers: entropy: implementation for TRNG driver of RA8x1
- dts: arm: add device node for trng of RA8x1
- boards: arm: enable support zephyr_entropy for ek_ra8m1 and
update board documentation
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
The nRF9280 is a SiP (System-in-Package) consisting of the nRF9230 SoC
and additional components such as PMIC and others. Additionally,
the nRF9230 contains several CPUs, similarly to the nRF54h20 SoC.
Update nrfx glue, and add necessary Kconfig and initialization code
to allow building for nRF9280 targets: CPU, Radio and PPR cores.
The nRF9280 is used for all user build targets and Kconfigs,
whereas the nRF9230 is used as the build target for the MDK.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Co-authored-by: Andreas Moltumyr <andreas.moltumyr@nordicsemi.no>
MCUX ehci controller driver support cache maintenance if
USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE is enabled.
Enable USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE if
CONFIG_UDC_BUF_FORCE_NOCACHE is false and CONFIG_NOCACHE_MEMORY
is true.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
For Enterprise crypto MbedTLS needs more heap either separate pool or
libc heap, based on experiments 55000 was arrived for a successful
WPA2-EAP-TLS association.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add basic WPA2 EAP-TLS support.
Also, add test infrasturcture esp. the certification handling,
non-certificate credentials are take as runtime input and certificated
are build time input for testing.
A real application can set certificates at runtime too.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
First commit to support serial driver running on r_sci_uart for Renesas
RA devices.
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
In order to mitigate side channel attacks, even if the PWE is found the WPA
supplicant goes through full iterations, but in some low-resource systems
this can be intensive, so, add an option to exit early.
Note that this is highly insecure and shouldn't be used in production
Signed-off-by: Gang Li <gang.li_1@nxp.com>
This should be configurable by applications in case a full CLI interface
to the WPA supplicant is needed.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Now retained_mem driver can utilize nrfx_ram_ctrl helper
for nRF devices. It provides abstraction over various RAM retention
peripherals like POWER, VMC or MEMCONF.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Allows RTT inizialization function to either init Cntrol Block always
or initialize only after checking it it's not already initialized by
another program, typically by a bootloader.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
Allows optionally placing Segger RTT data either in a specific
linker section that is located at RAM start, or in a specific linker
section defined by a memory region in DTS, as third and fourth
alternative to the DTCM section or the default data section.
This is useful to share the fixed address for different programs,
typically bootloader and application, and have seamless logging.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
User can assign callback function to local domain dvfs handler
and get notification when scaling process is finished for
particular domain.
Reworked usage of DVFS_SERV_HDL_FREQ_CHANGE_IN_PROGRESS_BIT_POS
which was not initialized properly.
Signed-off-by: Lukasz Stepnicki <lukasz.stepnicki@nordicsemi.no>
Wi-Fi shell now uses _sta/_ap APIs to getch specific inteface types, so,
by default register as a Station.
This needs more work to handle multiple modes and mode switching.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This is required since NRF_FUN_POS (pinctrl) has changed its position
from 17 to 18 (a value hardcoded in the nrf-regtool as well).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Remove the duplicate `USE_STM32_HAL_RAMCFG` Kconfig symbol definition
from Kconfig.stm32, which was introduced by accident in PR #66181,
commit 6ed002ddae.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
1. Support USB-C drivers TCPC, PPC, and VBUS with UTCPD H/W IP
2. UTCPD is interconnected with Timer-triggered EADC for updating
VBUS/VCONN voltage periodically
Signed-off-by: Chun-Chieh Li <ccli8@nuvoton.com>
Remove the ‘HAS_MCUX_ACMP’ Kconfig, and also remove it from
driver and soc Kconfig files. It is not needed since we already
depend on 'ACMP' enabled in the dt file, the 'HAS_MCUX_ACMP'
kconfig is a relic of the past before devicetree was stable.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Add a void *user_data pointer to the input callback structure. This is
useful for driver to get back the driver data structure and avoid
defining wrapper functions.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
