Zephyr UART drivers offer very low-level functionality. Oftentimes,
it would be useful to provide higher-level wrappers around UART
device which would offer additional functionality. However, UART
driver irq callback routine receives just a pointer to (low-level)
UART device, and it's not possible to get to a wrapper structure
(without introducing expensive external mapping structures). This
is an indirect reason why the current UARt wrappers - uart_pipe,
console - are instantiated statically just for one underlying UART
device and cannot be reused for multiple devices.
Solve this by allowing to pass an arbitrary user data to irq
callback, set by new uart_irq_callback_user_data_set() function.
Existing uart_irq_callback_set() keeps setting a callback which
will receive pointer to the device.
While public API maintains compatibility, drivers themselves need
to be updated to support arbitrary user data storage/passing (as
legacy uart_irq_callback_set() functionality is now implemented in
terms of it).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Remove some 'default ""' properties on string symbols too.
Also make definitions more consistent by converting some
config FOO
<type>
prompt "foo"
definitions to a shorter form:
config FOO
<type> "foo"
This shorthand works for int/hex/string symbols too, not just for bool
symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Set subCompatibleID value according to "C:\Windows\INF\rndiscmp.inf"
file. The exact matching part is:
"USB\MS_COMP_RNDIS&MS_SUBCOMP_5162001"
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add loopback function. This function can be used to test
USB device drivers and device stack connected to linux host
and has the similar interface as "Gadget Zero" [1] of the Linux
kernel.
Use modprobe usbtest to load the module, see also [2] for the
description of the tests and for Vendor and Product ID of the
"Gadget Zero". The userspace tool testusb [3] is needed to start
the tests.
[1] linux/drivers/usb/gadget/function/f_loopback.c
[2] linux/drivers/usb/misc/usbtest.c
[3] linux/tools/usb/testusb.c
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
After PR #8608 every driver should call ethernet_init(), fixes missing
chunks of that PR.
Fixes: #8752
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
bcdUSB has been previously updated from 1.1 to 2.0 in default
device descriptor, but not in DFU class. After USB bus reset
performed by dfu-util, alternative descriptor is registered
with bcdUSB set to 1.1. This mismatch causes communication failure.
DFU descriptor's bcdUSB has been updated to match default one.
Relates to #7570
Signed-off-by: Paweł Zadrożniak <pawel.zadrozniak@nordicsemi.no>
Remove all CONFIG_*_EP_ADDR options but keep the default
values for it, as they are necessary to find ep_addr in
usb_ep_cfg_data associated with bEndpointAddress in
interface descriptor.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The payload size was hardcoded to 64.
This commit adds a configuration option to choose > 64 bytes
when the device allows larger packets.
A configuration option USB_HID_MAX_PAYLOAD_SIZE is added in
subsys/usb/class/hid/Kconfig
The default value is set to 64
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
A HID application can no longer write to the default
interrupt IN endpoint because the addresses are assigned
dynamically. Add hid_int_ep_write() function and leave
it to the hid-core to call the usb_write() with the correct
endpoint address.
fixes: #8424
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Adapt functions for new composite interface.
Assign bInterfaceNumber and similar variables of a Interface
default values, these should be valid values for non-composite
configuration. For the case of the composite configuration,
these variables must be set by the interface configuration
function (interface_config) accordingly.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch changes all class functions so that the endpoint
address will be retrieved from the usb_ep_cfg_data at runtime.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
This patch moves the descriptor parts to related class
and function drivers and extends the usb_fix_descriptor
function so that the wTotalLength and bNumInterfaces
are corrected before enumeration.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
The Kconfig option HID_INTERRUPT_EP_MPS does not have a prompt entry,
so it is not configurable in practice. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use transfer API for ACL out transfers. No extra buffer is requested,
directly use the net buf and update its len on transfer completion.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Bluetooth net buffers have 1-byte reserve, which can be used by HCI bus
driver (uart, spi...) to set packet type (H4).
This fixes assert when building hci_usb with CONFIG_NET_BUF_SIMPLE_LOG.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Calling bt_send from IRQ context is not safe, at least in HCI SPI case.
In the same way as hci_core, create a thread for TX.
This fixes hci_usb sample for 96b_carbon board.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
This patch prevents eem_read_cb from trying to allocate a lot of memory.
It may happen that EEM payload size is zero, the eem_read_cb then tries
to allocate a buffer which is 0xfffc bytes large and luckily blocks.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Rename CONFIG_RNDIS_TX_BUF_* to CFG_RNDIS_TX_BUF_* and rename
CONFIG_RNDIS_CMD_BUF_* to CFG_RNDIS_CMD_BUF_*. The CONFIG options where
not exposed in Kconfig so limit use of CONFIG_ to Kconfig only symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add support for enabling multiple disk interfaces (Flash, RAM)
simultaneously in Zephyr by introducing a simple disk interface
framework where we can register multiple disks which would
interface with different storage devices. This would enable us
to have multiple instances of FATFS in Zephyr.
Add support for mass storage drive disk name which will be
used as an argument when calling the disk interface API's.
Enable multiple volumes support configuration in
ELM FAT library.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
This patch moves USB DFU class driver to subsys/usb/class.
For the first the USB DFU class driver depends on DFU image
manager and partition layout and is limited to use as an
application for the bootloader. The driver fetches the
information about the flash, erase block size, write block
size and partitions offset from the DT now. The driver has
two interfaces associated with the two partitions "SLOT-0"
and "SLOT-1". The "SLOT-0" can only be read.
In the following work the class driver can be extended so
that it can be used from the bootloader and update a flash
region directly from the bootloader.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Fix regression with RNDIS due to different USB configuration method.
RNDIS drivers in Windows never call Set Interface and netusb is always
disabled. Change to enable netusb upon USB Set Configuration.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Some buggy system may be pass a larger wLength when it try read
HID report descriptor, although we had already tell it the right
descriptor size.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Implement Bluetooth over USB functionality through Bluetooth raw
access to the Bluetooth controller. Most devices with Bluetooth and
USB controllers supported by Zephyr can export themselves as USB
Bluetooth dongles.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
set_report() is used by the host to set a feature on the device such
as turning a LED on or off.
This is also used by protocols such as FIDO U2F to transfer data to
the device.
Signed-off-by: Michael Hope <mlhx@google.com>
int_in_ready is an optional callback that is called when the current
interrupt IN transfer has completed. This can be used to wait for the
endpoint to go idle or to trigger the next transfer.
This is needed for protocols like FIDO U2F that use the interrupt
endpoint for transfers.
Signed-off-by: Michael Hope <mlhx@google.com>
Add CDC Ethernet Emulation Model function driver. This usb network
function can be used for ethernet over USB. Ethernet packet are
encapsulated within EEM packets. An EEM pkt contains 2-byte header
and 4-byte sentinel (or crc).
Note that EEM packets can be split across USB packets but shall not
be split across USB transfers.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Consider media connected when interface is selected by the host and
disconnected on device diconnection.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As per uart_pipe.c, irq_is_pending should only return true if any
*unmasked* interrupts are pending.
The device_get_binding() code only checks devices that have an API.
Set the API at compile time so that other devices can refer to the CDC
ACM driver.
usb_write() may return EBUSY if the endpoint is full. Propagate this
for future use.
Signed-off-by: Michael Hope <mlhx@google.com>
net_eth_get_hw_capabilities() calls .get_capabilities() which is part
of the ethernet API but not the net_if_api that netusb implements.
This causes a fault as .get_capabilities() was past the end of the
struct and resolved to a random address.
Also, make the API const and give it a unique name.
Signed-off-by: Michael Hope <mlhx@google.com>
