After it sends SYN_ACK, there is a case that the client sends the packet
with both ACK and RST bits are set, and this packet needs to be handled
if the packet is valid.
CLIENT SERVER
------ ------
|--------- SYN -------->|
|<------ SYN_ACK -------|
|------- ACK_RST ------>|
|--------- SYN -------->|
|<-------- ??? ---------|
This patch checks the RST bits even if other flags are set and process
the packet.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
IPv6 cleanup patch introduced a regression. Misunderstood the logic.
Do not drop the packet if packet does not have ND options, just skip.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Instead of reading or writing different icmpv4 header's individual
variables, better to read or write whole struct at a time. This
minimizes the calls to net_frag_read() or net_frag_write().
changes also removed slow and fast paths. Changes should optimize
the total flow.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Up until now, Zephyr has patched Kconfig to use the last 'default' with
a satisfied condition, instead of the first one. I'm not sure why the
patch was added (it predates Kconfiglib), but I suspect it's related to
Kconfig.defconfig files.
There are at least three problems with the patch:
1. It's inconsistent with how Kconfig works in other projects, which
might confuse newcomers.
2. Due to oversights, earlier 'range' properties are still preferred,
as well as earlier 'default' properties on choices.
In addition to being inconsistent, this makes it impossible to
override 'range' properties and choice 'default' properties if the
base definition of the symbol/choice already has 'range'/'default'
properties.
I've seen errors caused by the inconsistency, and I suspect there
are more.
3. A fork of Kconfiglib that adds the patch needs to be maintained.
Get rid of the patch and go back to standard Kconfig behavior, as
follows:
1. Include the Kconfig.defconfig files first instead of last in
Kconfig.zephyr.
2. Include boards/Kconfig and arch/<arch>/Kconfig first instead of
last in arch/Kconfig.
3. Include arch/<arch>/soc/*/Kconfig first instead of last in
arch/<arch>/Kconfig.
4. Swap a few other 'source's to preserve behavior for some scattered
symbols with multiple definitions.
Swap 'source's in some no-op cases too, where it might match the
intent.
5. Reverse the defaults on symbol definitions that have more than one
default.
Skip defaults that are mutually exclusive, e.g. where each default
has an 'if <some board>' condition. They are already safe.
6. Remove the prefer-later-defaults patch from Kconfiglib.
Testing was done with a Python script that lists all Kconfig
symbols/choices with multiple defaults, along with a whitelist of fixed
symbols. The script also verifies that there are no "unreachable"
defaults hidden by defaults without conditions
As an additional test, zephyr/.config was generated before and after the
change for several samples and checked to be identical (after sorting).
This commit includes some default-related cleanups as well:
- Simplify some symbol definitions, e.g. where a default has 'if FOO'
when the symbol already has 'depends on FOO'.
- Remove some redundant 'default ""' for string symbols. This is the
implicit default.
Piggyback fixes for swapped ranges on BT_L2CAP_RX_MTU and
BT_L2CAP_TX_MTU (caused by confusing inconsistency).
Piggyback some fixes for style nits too, e.g. unindented help texts.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This net_buf leak happends when we are low on available net_buf
count. During TCP segment preparation we do allocate IP header
successfully, but we fail to allocate TCP header. In such case
pkt->frags is not NULL anymore (it contains IP header), but we
override it during TCP header allocation error path. This results
in net_buf containing IP header to never be deallocated, because
it does not belong to any net_pkt anymore.
Use net_pkt_frag_add() function to add tail for future net_pkt
deallocation, instead of assigning tail to pkt->frags pointer.
Fixes: c6407659f3 ("net: tcp: Add the frag back to caller allocated
net_pkt")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Instead of reading or writing different icmpv6 header's individual
variables, better to read or write whole struct at a time. This
minimizes the calls to net_frag_read() or net_frag_write().
changes also removed slow and fast paths. Changes should optimize
the total flow.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
IPv6 fragmentation splits the packet into two parts, one is header
and another is payload. Every time header is cloned and part of
payload is appended. At the end original header packet is not freed.
Causes memory leak.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current implementation only considers IP header length while setting
appdata value on a cloned packet. It will give bogus value if original
packet contains extension headers and if extension headers are large
(i.e. more than one fragment). Only consider appdata length from the
original packet.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The ethernet sending routine sent a corrupted ARP packet instead
of the actual IPv4 packet.
Fixes#9348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to inline the net_if_ipv6_addr_lookup_by_iface() function
as it is used multiple times in ipv6.c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function which returns proper network interface to send either
IPv4 or IPv6 network packet to corresponding destination address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a function that will return the network interface that would
be used when sending a IPv6 network packet to specific IPv6 destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For example for Bluetooth IPSP, it is not needed to join solicited
node multicast group address.
From https://tools.ietf.org/html/rfc7668#section-3.2.2 :
"""
There is no need for 6LN to join the solicited-node multicast address,
since 6LBR will know device addresses and hence link-local addresses
of all connected 6LNs.
"""
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LLDP protocol defines 2 separate agents, the Transmitters and
the Receivers. For the context of Zephyr, we are only interested in
the Tx agent, thus we drop any LLDP frames received by Zephyr.
LLDP frames are basically composed by an ethernet header followed by
the LLDP Protocol Data Unit (LLDPDU). The LLDPDU is composed by several
TLVs, some of them being mandatory and some optional.
Our approach here is having TLVs fully configured from Kconfig, thus
having the entire LLDPDU constructed on build time.
The commit adds NET_ETH_PTYPE_LLDP definition and related handling.
If CONFIG_NET_LLDP is enabled then ethernet_context has a pointer to
the struct net_lldpdu that belongs to that ethernet interface. Also
when CONFIG_NET_LLDP is enabled, the LLDP state machine will start to
send packets when network interface is coming up.
Currently the LLDP state machine is just a k_delayed_work() sending the
LLDPDU at a given period (defined by CONFIG_NET_LLDP_TX_INTERVAL).
Fixes#3233
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that string to integer conversions are checked properly
so that we are not trying to use the return value from strtol()
if the string is not a number.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This change moves the logic for linearize and append_bytes from
the net_pkt sources into the net_buf sources where it can be
made available to layers which to not depend on net_pkt. It also,
adds a new net_buf_skip() function which can be used to iterated
through a list of net_buf (freeing the buffers as it goes).
For the append_bytes function to be generic in nature, a net_buf
allocator callback was created. Callers of append_bytes pass in
the callback which determines where the resulting net_buf is
allocated from.
Also, the dst buffer in linearize is now cleared prior to copy
(this was an addition from the code moved from net_pkt).
In order to preserve existing callers, the original functions are
left in the net_pkt layer, but now merely act as wrappers.
Signed-off-by: Michael Scott <mike@foundries.io>
This commits adds new priority to traffic class mappings and allows
users to choose which mapping to use through menuconfig.
The new mappings are recommended in 802.1 (chapter 34.5) for
time-sensitive applications supporting the credit-based sharper
algorithm.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The dummy L2 does not setup the link layer address. Do not check the
source and destination link layer addresses when routing packets
otherwise packet routing will not work when using a dummy L2.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allows ethernet drivers to provide vendor specific statistics
and details in the form of key-value pairs with the name of
the staticstic and its value.
The new string tables will be behind a new config:
NET_STATISTICS_ETHERNET_VENDOR
Suggested-by: Jukka Rissanen <jukka.rissanen@intel.com>
Signed-off-by: Jonathan Yong <jonathan.yong@intel.com>
- Remove redundant 'n' defaults. 'n' is the default value for bool
symbols.
This makes the auto-generated documentation clearer as well: You get
"implicitly defaults to n" instead of
"- n if <propagated dependencies>".
- Shorten
<type>
prompt "foo"
to
<type> "foo"
This works for all types, not just bool.
- Various formatting nits.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are too many individual requests for Qav related parameters. There
are more Qav parameters that need to be supported (and will be supported
soon - both on the GET and SET side). Handling it the way it was handled
so far would render the eth mgmt API dominated by Qav parameters. That
would make the file hard to read and understand.
Instead of that - use a single GET and SET requests for all Qav
parameters. This works by adding a separate enum with Qav request type
to the ethernet_qav_param struct.
Additionally this approach makes it much easier to document it all since
we now have just a single request and documentation comments in the
ethernet_qav_param struct.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Print information about supported hardware capabilities for
ethernet interfaces when executing "net iface" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If ethernet mgmt is enabled and the driver supports priority queues,
show info about them including the Qav status
(enabled/disabled/unsupported).
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Add basic IPv4 Link Local support as described in RFC 3927.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reduces memory overhead on net_if_dhcpv4: 16 bytes vs 120 bytes
before. This might proove to be beneficial when there are many network
interface.
dhcpv4 ROM consumption is now 2132 bytes vs 4224 (many switches removed)
Fixes#8727
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Empty line before if (unless test uses previous line assignment) and
after } (unless it's another } ...)
Indentation fixed as well.
Fixes#8727
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Pre-assigned are always coming first.
- Always declare at the beginning of a code block
Fixes#8727
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When an echo request is sent to an unknown neighbor, a Neighbor
Solicitation request is sent, however if the source address
cannot be determined the NS request is dropped but the pending
packet is not freed.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Move struct members around in networking code so that we avoid
unnecessary holes inside structs. No functionality changes by
this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Reduces the logic as well as the ipv4 header checksum needs to be
computed either way.
Fixes#8720
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use modular arithmetic in statistics prints so that wraparounds are
automatically handled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to set the network interface into promiscuous mode
and then receive all the network packets that are received by
that interface.
Fixes#7595
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
