This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add DTLS support to socket echo_client and echo_server samples.
Additionally, move TLS-related configs to overlay-tls.conf config file,
to align with other examples.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
On flash NVS was stored one entry after another including the metadata
of each entry. This has the disadvantage that when an incomplete write
is performed (e.g. due to power failure) the complete sector had to be
rewritten to get a completely functional system.
The present rewrite changed the storage in flash of the data. For each
sector the data is now written as follows: the data itself at the
beginning of the sector (one after the other), the metadata (id, length,
data offset in the sector, and a crc of the metadata) is written from
the end of the sector. The metadata is of fixed size (8 byte) and for
a sector that is completely occupied a metadata entry of all zeros is
used.
Writing data to flash always is done by:
1. Writing the data,
2. Writing the metadata.
If an incomplete write is done NVS will ignore this incomplete write.
At the same time the following improvements were done:
1. NVS now support 65536 sectors of each 65536 byte.
2. The sector size no longer requires to be a power of 2 (but it
still needs to be a multiple of the flash erase page size).
3. NVS now also keeps track of the free space available.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
The nvs module has some disadvantages for larger block size. The data
header and slot are taking up to much space. A rewrite is proposed that
reduces the used storage space for systems with write block size > 4.
The data storage in flash is now one unit consisting of: data_length,
data_id, data and data_length again in a multiple of the write block
size. The data_length at the end is used to validate the correctness of
the flash write and also allows to travel backwards in the filesystem.
As a comparison, on a system with block size 8 byte, a 32 bit values
now fits 1 block including the metadata (length and id). This used to
be 3 blocks.
The data_length will occupy 1 byte if the data length is less than 128
byte, it will occupy 2 byte if the data length is 128 byte or more. The
data length is limited to 16383 byte.
Each write to flash is verified by a read back of the data.
The read performance is improved because reading is done backwards so
the latest items are found first.
When the filesystem is locked it can be unlocked by calling
reinit(), this will clear flash and setup everything for storage.
add sample documentation - README.rst
Update dtsi to include erase_block_size, use erase_block_size in sample
Update prj.conf to include CONFIG_MPU_ALLOW_FLASH_WRITE
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This will make adding properties to symbols in the base Zephyr Kconfig
files work the same as before.
I didn't actually spot any such cases, so this is just to play it safe.
It also makes the sample Kconfig symbols appear at the top in the
menuconfig interface, which might be nice.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These are no longer required. Kconfiglib expands references to
environment variables directly.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
CMake has several prototypes/signatures for the function
'target_link_libraries'. This commit migrates the usage of
'target_link_libraries' on Zephyr CMake libraries from the old 'plain'
signature to the new '<PRIVATE|PUBLIC|INTERFACE>' signature.
For technical reasons the two signatures can not be mixed. Each
library must exclusively use either the old or new signature.
The 'old' plain signature is equivalent to using the PUBLIC
signature. Migrating to use 'PUBLIC' is therefore expected to be a
safe change.
After the migration it will be possible to use the PRIVATE and
INTERFACE signatures on Zephyr CMake libraries. This is useful for
instance to fix issue 8438.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The old GCC ARM Embedded website on launchpad
(https://launchpad.net/gcc-arm-embedded) has been superseeded by the new
GNU Arm Embedded one
(https://developer.arm.com/open-source/gnu-toolchain/gnu-rm).
This also means a change of name from "GCC" to "GNU". Reflect this in
the enviroment variables so that the proper term is used henceforth.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Some reST syntax errors and doc edits got missed during the review
of PR #561 causing problems in the generated HTML.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This patch aligns documentation to changes in imagetool.py released
in mcuboot 1.2 (latest release).
Also adds note about workaround for possible timeout while erasing
image-slot on some devices (like nRF52840 SoC)
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The application does nothing useful, it just enables Link Layer
Discovery Protocol support which starts to send LLDP network packets
to ethernet network interface. Note that the LLDP packets are only
sent to those network interfaces that claim to support LLDP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Remove NET_LOG / NET_BUF_LOG settings, instead just enable SYS_LOG
- Simplify by also removing SYS_LOG_SHOW_COLOR, INIT_STACKS and
NET_STATISTICS. These can be enabled by user if wanted/needed.
Signed-off-by: Michael Scott <mike@foundries.io>
Allow user to configure a program that is executed after the
network interface is created and IP address is setup.
This can be used e.g., to start wireshark to capture
the network traffic of the interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Default value 2 was not enough for mcast addresses table.
Core stack adding mcast addresses on various reasons. Also
coaps_client trying to create mcast context for some purpose.
mcast address is not in lookup table, so binding fails. Add
CoAP sample related mcast address to table and then bind the
context.
Fixes#9131
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Let's add an overlay file to enable using the WNC-M14A2A LTE-M
modem with the LwM2M client.
Also, update documentation for it's use.
Signed-off-by: Michael Scott <mike@foundries.io>
Adding IPv4 autoconf sample application that can be used to
test IPv4 autoconf functionality.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This app will not fit in the 96b_nitrogen board with ECC enabled.
"real-ld: region `SRAM' overflowed by 68 bytes". Disable the feature
explicitly since a subsequent patch will auto-enable it for all
combined Bluetooth Host-Controller builds.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Thread registers multiple unicast and multicast adresses by default. As
they are exchanged with Zephyr interface, we need enough buffers to
store them all.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds TLS support to socket echo_client/echo_server samples.
Credentials used are the same as in the non-socket versions of these
samples, therefore they can be easily tested with net-tools utils.
Maximum payload size for the client was sligtly reduced to fit the
encrypted data within 1280 bytes.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add CA certificates to http_get and big_http_download samples. Use
socket options to configure TLS connection - TLS certificates are now
validated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Mesh specification doesn't support more than 32 transport layer
segments, the way the number was so far derived from the advertising
buffer count could result in a highre numbe than 32, thereby wasting
memory. Make the number of supported segments build-time configurable
through a new BT_MESH_TX_SEG_MAX configuration option.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The number of buffres influences e.g. the maximum SDU size, which in
turn influences call stack consumption. Use lower values where a high
number of buffers isn't necessary, and use the default (6) where it's
sufficient.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Do not enter Low Power states once the test execution is done. This
is needed to avoid the flashing issues which were seen when system
is in deep sleep states.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Refactor the prj*conf files so that there is only one master
prj.conf and several overlay conf files that add / change
only minor subset of functionality.
Use the overlay files like so:
cmake -DBOARD=nrf52840_pca10056 \
-DOVERLAY_CONFIG=overlay-ot.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The logic for error checking after net_pkt_pull was inverted -
build_pkt_reply would exit in case net_pkt_pull succeeded. In result no
responses were sent by echo_server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If -fno-strict-overflow compiler flag is disabled, then this warning
is printed:
samples/net/throughput_server/src/server.c:157:6: \
error: assuming signed overflow does not occur when assuming \
that (X + c) >= X is always true [-Werror=strict-overflow]
if (new_print > curr) {
Fixes#8924
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor the prj*conf files so that there is only one master
prj.conf and several overlay conf files that add / change
only minor subset of functionality.
Use the overlay files like so:
cmake -DBOARD=nrf52840_pca10056 \
-DOVERLAY_CONFIG=overlay-ot.conf ..
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If echo-server receives a IPv6 packet with large header (e.g HBHO)
build_reply_pkt() function failed to remove IPv6 header. Reason is
net_buf_pull() doesn't work if header length is more than one
fragment. net_pkt_pull() solves the issue.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This force CONFIG_BT_DEVICE_NAME_MAX to be set even in boards where
CONFIG_BT_SETTINGS won't be defined so it exercise such configuration.
In addition to that set a long name that would not fix in the
ScanData.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixing copy paste error, where ipv4 member of
the structure is used in ipv6 branch.
CID: 187074
Fixes Issue #8992
Signed-off-by: Subramanian Meenakshi Sundaram <subbu147@gmail.com>
On some architectures tick time cannot be expressed as integer
number of microseconds, introducing error in calculations using
sys_clock_us_per_tick variable.
This commit deprecates the sys_clock_us_per_tick variable and
replaces its usage by more precise calculations based on
sys_clock_hw_cycles_per_sec and sys_clock_ticks_per_sec.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Enabling internal processing thread allows implicit initialization
and processing log messages in case mutlithreading is enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
With the change to the configuration files, we can now compile
this sample for any platform that uses only the default prj.conf file:
nrf52840_pca10056
nrf52840_pca10059
usb_kw24d512
Update the sample.yaml file to remove the excludes.
Signed-off-by: Michael Scott <mike@foundries.io>
Let's rename README to README.rst and add:
- Some nice formatting for existing content
- Requirements section (including handy links)
- Build and Running section (including multiple overlay options)
Signed-off-by: Michael Scott <mike@foundries.io>
