This addresses the following warning building with `CONFIG_64BIT=y`:
error: field precision specifier '.*' expects argument of type 'int',
but argument X has type 'size_t' {aka 'long unsigned int'}
Signed-off-by: Chen Xingyu <hi@xingrz.me>
Move "bluetooth" tag and harness from the common section
of the smp_svr sample.yaml file to "bluetooth" specific test cases.
Signed-off-by: Andrej Butok <Andrey.Butok@nxp.com>
This set of changes enables the RS485 hardware connected to usart3 and
provides some overlays that allow for easily running the modbus
rtu_client and rtu_server samples on Opta.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
Add `hifive_unmatched//s7` (earlier selected by default, using
`hifive_unmatched`) and `hifive_unmatched//u74` targets.
Define work-area for other 4 cores in openocd.cfg
Update twister platform white/black lists, to support new targets
Signed-off-by: Jakub Wasilewski <jwasilewski@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add a function similar to sample_usbd_init_device(), but one that does
not initialize the device. It allows the application to set additional
features, such as additional descriptors.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Obviously, everyone knows that there are 8 bits per byte, so
there isn't a lot of magic happening, per se, but it's also
helpful to clearly denote where the magic number 8 is referring
to the number of bits in a byte.
Occasionally, 8 will refer to a field size or offset in a
structure, MMR, or word. Occasionally, the number 8 will refer
to the number of bytes in a 64-bit value (which should probably
be replaced with `sizeof(uint64_t)`).
For converting bits to bytes, or vice-versa, let's use
`BITS_PER_BYTE` for clarity (or other appropriate `BITS_PER_*`
macros).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Change downlink callback to transport data using flags.
Related to Issue #55072
Co-authored-by: Jan Kowalewski <jkowalewski@cthings.co>
Signed-off-by: romain pelletant <romainp@kickmaker.net>
Signed-off-by: Jan Kowalewski <jkowalewski@cthings.co>
'nrf52840dk/nrf52840' is already listed under "generic" 'sample.dap.bulk',
so keeping 'sample.dap.bulk.nrf' has no value. The only difference is
dependency on 'gpio' instead of 'arduino_gpio', but
'nrf52840dk_nrf52840.overlay' references arduino header gpios only.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Remove CONFIG_MMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the mmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
mmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_SDMMC_VOLUME_NAME, and set the disk name based on the
``disk-name`` property. This aligns with other disk drivers, and allows
for multiple instances of the sdmmc_subsys disk driver to be registered.
Add disk-name properties for all in tree definitions for the
sdmmc-subsys disk driver, and change all in tree usage of the disk name
Fixes#75004
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
- fixes overlay-udp.conf build for platforms without TRNG.
- adds TEST_RANDOM_GENERATOR, as for most network samples.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Coverage for cmsis rtos APIS should is provided using simulation, we
should not build those on every platform we have. Avoid failures due to
incompatiblities in requirements coming from various boards and also
reduce churn and noise during testing and CI.
Fixes#80215
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This resolves some addressed comments in this PR
https://github.com/zephyrproject-rtos/zephyr/pull/77930
It adds as well a section in the documentation about some
recommendations to increase ZMS performance.
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
This adds a user application that shows the usage of ZMS
The sample app shows three main functions of ZMS:
- read/write/delete key/value pairs
- fill all storage and delete it
- calculate free remaining space
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
This updates the documentation of all the Qemu boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the STM32 boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Espressif boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Replace OVERLAY_CONFIG with CONF_FILE since the file in question
contains an alternative configuration to the one in prj.conf
as clearly stated in the sample doc
'If you use poll you should also use `prj_poll.conf` instead of
`prj.conf`.'
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Move stm32_blk.conf ouside of 'boards' as this folder is meant to
contain only board-specific devicetree overlays and Kconfig fragments.
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
The nRF54 and nRF92 chips has data cache, which means
the ICMsg and ICBMsg must be configured to follow required
cache alignment of the shared memory.
The `dcache-alignement` needs to be defined for that.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
This updates the documentation of all the Seeed Studio boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Change regex for no_multithreading test version for nRF54L15 platform.
This needs to be changed because LOG is running in MINIMAL mode.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Use EXTRA_CONF_FILE in documentation .rst/.md files,
that replaced deprecated OVERLAY_CONFIG since the Zephyr v3.4 release.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
.conf files added to enable INPUT_ESP32_TOUCH_SENSOR during sample build.
The absence of these files incorrectly prevented the input_dump sample
build from failing due to missing required hal files.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Add usage example for sys_trace_user_event, to demonstrate how users
could add tracing functionality to their application.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use EXTRA_CONF_FILE in sample yaml files,
that replaced deprecated OVERLAY_CONFIG
since the Zephyr v3.4 release.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Currently, Zephyr is always sending back notifications to
AP (e.g Linux in our case) on channel 0.
But this currently doesn't work if Linux uses other channel
id for communication. So, add option to use predefined
vring ID that can accomodate Linux used ID.
Signed-off-by: Alexandru Lastur <alexandru.lastur@nxp.com>
ZBus currently does not have a `HEAP_MEM_POOL_ADD_SIZE_ZBUS` when using
message subscribers or runtime observers, forcing the developer to set that
manually. Adding the configuration option to zbus would improve its
usability and make zbus easier to use. With this feature, zbus aligns with
the other Zephyr subsystems' heap memory allocation approach.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The sample is supposed to help examine the issues with touchscreen.
It draws a plus in last touched position.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The host-based adv auto-resume function has both a problematic
implementation and disagreement in the community around how it should
behave. See the issue linked resolved below for details.
This patch makes the deprecation visible to the user. The user will be
better served by a auto-resume tailored their applications use case,
based on more primitive host API like `conn_cb.recycled`, which has
obvious behavior that is unlikely to change.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/72567
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Disable CDC ACM logging in the configuration overlays used to select the
CDC ACM UART as the shell backend.
The build warning was introduced by the commit e8c4867806
("usb: cdc_acm: disable logging if used for shell with logging")
to prevent recursive logging when using the CDC ACM UART as shell or
logging backend
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
