Return meaninful HCI error when it's not possible to start advertising
because of maximum number of connections already in use.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
Remove the redundant proof of concept template temporary
role implementation from the repository.
Relates to #12860.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
During regression testing of PA/LNA feature it was noticed
that compilation failed due to missing port of the code
conditionally compiled for PA/LNA feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the control procedure context safety by adding checks in
thread mode control path to detect pre-emption by interrupt.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a squash merge of commits introducing the new split
Upper Link Layer and Lower Link Layer architecture of the
Bluetooth Low Energy controller.
This introduces a new, improved Link Layer based on the
concept of split responsibilities; The Upper Link Layer
(ULL) is in charge of control procedures, inter-event
scheduling and overall role management. The code for the
ULL is shared among all hardware implementations. The
Lower Link Layer (LLL) is responsible for the intra-event
scheduling and vendor specific radio hardware access.
The communication between ULL and LLL is achieved through
a set of FIFOs that contain both control and data packets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Wolfgang Puffitsch <wopu@oticon.com>
Signed-off-by: Morten Priess <mtpr@oticon.com>
Preliminary work done towards Mesh extensions on the old LL
architecture implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Missing updates to old architecture implementation towards
introduction of new ULL LLL architecture.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactored the internal LL interfaces to have return value
to match the HCI error code u8_t data type.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit renames the nrf5_clock_control.h and
nrf5_clock_control.c files to nrf_clock_control.h and
nrf_clock_control.c, respectively, as they are used
in nRF9160 builds, as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the CLOCK_CONTROL_NRF5 Kconfig symbol to
CLOCK_CONTROL_NRF. The change is required to aleviates confusion
when selecting the symbol in nRF9160 SOC definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Preparation to introduce the Upper Link Layer (ULL) and
Lower Link Layer (LLL) split architecture.
- Move SoC dependent HAL to vendor specific folder.
- Preparation to split data structures into ULL and LLL
types.
- Added more role and state conditional compilations.
- Added some work-in-progress implementation of advertising
extensions, will be used as inspiration in the new split
architecture work.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix an issue wherein local or remote initiated Connection
Parameter Request procedure would stall without generation
of LE Connection Update Complete HCI event because a local
or remote initiated PHY Update procedure has overwritten the
currently active Link Layer Control Procedure type.
Signed-off-by: Vinayak Kariappa Chettimada <vinayak.kariappa@gmail.com>
Fix channel map update procedure implementation's handling
of different transaction collision by not asserting but
disconnecting the connection due to invalid behavior by
peer implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Explicitly track the connection update related ticker stop
and start to avoid asserting due to ticker update being done
at the same time for compensating the clock drift.
The compensation related ticker update failure in this case
can be safely ignored as new anchor point is used anyway
at the instant of the connection update.
Fixes#8796
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated controller implementation to disallow disabling
initiator state using scan disable. But allow disabling an
already disabled scan state. Also, disallow enabling scan
state while in initiator state.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the controller implementation to not feature
exchange if already done once either by local or remote peer
device in an active connection session.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add support for exchanging both minimum and maximum
connection interval values in Connection Parameter Request
Procedure implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a pure refactoring of the k32src_wait function. It used the
following rules when refactoring:
Don't use the preprocessor when unprocessed C language suffices.
Don't undefine macro's.
Avoid global variables when possible.
Use consistent names for similiar things (hf_clock, lf_clock).
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fix an integer overflow in the scheduling implementation
that calculates whether resources required for next radio
event be retained.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit optimizes access to RNG driver by taking advantage
of the data structures layout. As result, number of calls to RNG
driver is reduced.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The entropy_nrf_get_entropy_isr(), which is specific to this driver,
is in fact equivalent of generic entropy_get_entropy_isr(..., 0).
This commit removes the entropy_nrf_get_entropy_isr() function
and replaces its usage by call to generic entropy API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Added implementation to avoid retransmitting NACK-ed Tx PDU,
to save on current consumption in retrying to transmit in
case peer device has no free buffer to receive the PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To allow the BLE stack to be used both in the real nRF platforms
and simulated ones, change the used macros in the code to the
COMPATIBLE ones.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Fix broken master role RSSI measurement. Since the original
contribution clean up into Zephyr, the radio shorts that was
set for measuring the RSSI for master role has been broken,
as it was cleared by the radio switching code further in the
Tx ISR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix connection failed to be established regression
introduced by the commit 350c569aba ("Bluetooth:
controller: Avoid offseting to lldata").
As the Rx-ed PDU buffer is re-used to construct the
connection complete message towards HCI, the fields in the
Rx-ed PDU need to be backup for future use in the control
path. Here the channel selection bit is backup now.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Connection Parameter Request Procedure implementation
to respond with sent interval_min and interval_max so that
certain peer devices dont reject the response as Invalid LL
Parameters.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactored the fix in the commit 685da02354 ("Bluetooth:
controller: Fix advertising random delay resolution calc")
to apply modulo in tick units before adding a tick.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Calling bt_recv in the Bluetooth host Tx thread by the
controller implementation caused deadlock in combined host
controller builds when HCI LE Create Connection Cancel
generated the HCI LE Connection Complete or HCI LE Enhanced
Connection Complete events.
Controller's HCI implementation has been updated to place
the generated event into Rx FIFO to avoid the deadlock.
Relates to commit a59f544fb4 ("bluetooth: controller:
Handle non-priority events correctly")
Relates to #10314.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In commit d5836195d7 ("Bluetooth: controller: Increase advertising
random delay resolution"), the resolution of random_delay was
increased from 8-bit to 16-bit. Due to this switch the result
of HAL_TICKER_US_TO_TICKS() can now be a 0, which causes the following
crash:
***** Kernel OOPS! *****
Current thread ID = 0x200043f0
Faulting instruction address = 0x17914
Fatal fault in ISR! Spinning...
Let's make sure we don't pass a 0 to ticker_update() by increasing
the result of HAL_TICKER_US_TO_TICKS() by 1.
Signed-off-by: Michael Scott <mike@foundries.io>
Increase the resolution of advertising random delay from
1 ms unit to 1 us units. The controller scheduling will
floor it to nearest 32KHz clock unit on nRF5 series.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Data Length Update implementation reused the flags used
by Encryption Procedure which caused invalid Encryption
Procedure sequence under conditions where Data Length Update
Procedure collide with Encryption Setup initiated by the
peer central device.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This allows to provide public address for controller without using
VS HCI command from host. Useful for controller only builds or
combined builds that are not using VS HCI commands.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Replase magic numbers with HCI Error Code definitions in the
LE controller implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the implementation of Connection Update Procedure to
not assert when peer master violates the Bluetooth
Specification v5.0 Vol.6 Part B Section 5.3 Procedure
Collisions. Instead disconnect the link with reason
Different Transaction Collision (0x2A).
Certain phones in the market perform Connection Update
Procedure and do not correctly handle remote initiated
colliding PHY update procedures. They try to perform both
the transactions involving an instant simultaneously
violating the Bluetooth Specifications.
Implementation in Zephyr is updated to gracefully handle
the violating remote master device, and not fatally assert
in the local device.
Relates to commit 8b3fd6963c ("Bluetooth: controller: Fix
assert on different transaction collision")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the implementation of PHY update procedure to not
assert when peer master violates the Bluetooth Specification
v5.0 Vol.6 Part B Section 5.3 Procedure Collisions. Instead
disconnect the link with reason Different Transaction
Collision (0x2A).
Certain phones in the market perform Connection Update
Procedure and do not correctly handle remote initiated
colliding PHY update procedures. They try to perform both
the transactions involving an instant simultaneously
violating the Bluetooth Specifications.
Implementation in Zephyr is updated to gracefully handle
the violating remote master device, and not fatally assert
in the local device.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to check and wait for stable 32KHz
clock source before starting connectable/directed
advertising state and initiating state.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
An empty packet on 2M phy is one more byte compared to 1M phy because
of the preamble.
The empty packet is then 11 bytes, which takes 44 us to transmit.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove include guards in internal files; it is an agreed
convention to not have include guards in internal header
files in Bluetooth subsystem.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
According to the Bluetooth Specification v5.0, Direct Test
Mode shall use maximum Tx power.
Fixed by adding nRF5x Radio HAL interfaces to get supported
maximum Tx power for SoC selected, and DTM testing sets the
Radio peripheral to use maximum Tx power.
Fixes#7243
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement the new entropy_get_entropy_isr() function to allow the kernel
to collect entropy before the scheduler and kernel data structures are
ready. Switch to an nrf-specific version for high-performance
requirements in the BLE Link Layer.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
