The latest update of the SAM E70 HAL (commit 6ad7e13608) shifted the
GMAC priority queues related registers by 4 bytes. It is not cleared
yet, if it is change is a mistake or a change from 0 based indexing
to 1 based indexing. Indeed the main queue is the number 0, and the
first priority queue is therefore the number 1.
In the meantime revert that change, and use the old registers addresses
matching the datasheet.
Fixes#12945
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Adds a shim layer around the mcux rtc driver to adapt it to the zephyr
counter interface. Portions of this driver are reused from the existing
rtc driver in drivers/rtc/rtc_mcux.c.
The hardware supports a single alarm only and a fixed wrap value.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add shim driver for i.MX EPIT (Enhanced Periodic Interrupt Timer)
peripheral which can be used for i.MX6SoloX, i.MX7D and other i.MX socs.
Origin: Original
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Adds a shim layer around the mcux elcdif driver to adapt it to the
zephyr display interface. Although the hardware and underlying mcux sdk
driver can support additional configurations, some shortcuts are
currently made in the shim that force a given pixel format, lcd data
bus width, and signal polarity. This works with the rocktech lcd module
used on imx rt boards, but will need to be updated for other display
panels.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
We forgot to include the mimxrt1060_evk_hyperflash board variant when
building mcux support for external memories.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Force Operation Mode Strap Override register to disable NANDTree. This
is due to some users reporting PHY entering NANDTree.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Boot PHY initialization timeout, caching mechanism fixes and networking
buffer descriptors moved to no cache section. Enabled cache management
in networking driver and manual barriers.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Remove conditionals with kconfig options that are not defined and for
drivers that are not supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Following the HAL import, reapply the part of commit 133306152 ("Add
missing header files symbols for Atmel SAM E70") which hasn't been fixed
upstream yet. From this commit, only the DACC alternate pin functions
have been fixed.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This is an import of Atmel SAM E70 HAL version 2.3.98, and only for the
revision A of the chip. The files have been passed through dos2unix to
minimize the differences with the previous version which seems to also
have been imported that way. All the patches that have been applied on
the previous version have been removed.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Adds a new config HAS_MCUX_ENET to constrain which socs can enable the
mcux ethernet driver. This will prevent users from enabling the driver
on socs like kl25z or kw41z which do not have ethernet mac hardware.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This library, written by STMicroelectronics, is used to convert an
audio stream from PDM format to PCM format through a signal filtering
and decimation.
Library is located in ext/hal/st/lib/audio.
Origin: ST Microelectronics
License: Apache 2.0
URL: https://os.mbed.com/
Commit: 25:f2c04f757003
Purpose: reconstruct the audio signal produced by ST MEMS microphone
Maintained-by: External
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Adding a binding .yaml file for Nordic FICR and the
corresponding macro definition for NRF_FICR in
nrfx_config_nrf9160.h header file.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit contributes a binding .yaml file for Nordic nRF
SPU peripheral and defines the macro for the peripheral base
register address in file ext/hal/nordic/nrfx_config_nrf9160.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The OpenISA RV32M1 SoC has four CPU cores. Two of these are RISC-V
32-bit cores, which are named "RI5CY" and "ZERO-RISCY". (The other two
cores are ARM Cortex-M0+ and -M4.) This patch adds basic SoC
enablement for the RISC-V cores:
- basic dtsi, to be extended as additional drivers are added
- SoC definition in soc/riscv32/openisa_rv32m1 for RI5CY / ZERO-RISCY
- system timer driver for RI5CY, based on LPTMR0 peripheral
The timer driver will be generalized a bit soon once proper
multi-level interrupt support is available.
Emphasis is on supporting the RI5CY core as the more capable of the
two; the ZERO-RISCY SoC definitions are a good starting point, but
additional work setting up a dtsi and initial drivers is needed to
support that core.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Signed-off-by: Michael Scott <mike@foundries.io>
This provides a HAL for the OpenISA RV32M1 SoC.
Origin: open-isa-rv32m1 GitHub organization
URL: https://github.com/open-isa-rv32m1/rv32m1_sdk_riscv
Revision: 365b1060f0947d5250c07b3eebdbc9e54cd0246e
Maintained-by: External
License: BSD-3-Clause
Signed-off-by: Marti Bolivar <marti@foundries.io>
Revert 71ba2de7:
ext: stm32cube: stm32f4xx: shift I2SR field in PLLI2SCFGR register
(ST Bug tracker ID: 50086)
Revert 9a893202:
ext: stm32cube: stm32f7xx: shift I2SR field in PLLI2SCFGR register
(ST Bug tracker ID: 50108)
This two commits were introduced to shift the PLLR parameter according
to the PLL register field position. After analysis, it appears that
function is actually correct, and issue was actually in parameters
provided that didn't match the API. (see PR #12609)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add the header file with the nrfx drivers configuration suitable for
the nRF9160 SoC. This file contains also definitions of CMSIS symbols
(like NRF_CLOCK or NRF_SPIM0) for structures of peripheral registers.
These symbols are used in nrfx HALs and drivers, and for other nRF SoCs
they come from MDK files. For nRF9160 they need to be mapped to proper
addresses in Secure or Non-Secure domain, so we use the information
coming from DT to get it done automatically.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
There is an effort underway to make most of the Zephyr build script's
reentrant. Meaning, the build scripts can be executed multiple times
during the same CMake invocation.
Reentrancy enables several use-cases, the motivating one is the
ability to build several Zephyr executables, or images, for instance a
bootloader and an application.
For build scripts to be reentrant they cannot be directly referencing
global variables, like target names, but must instead reference
variables, which can vary from entry to entry.
Therefore, in this patch, we replace global targets with variables.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Use built-in by default. We do not use external library of QMSI anymore
and rely on integrated HAL. Remove this option and simplify HAL
configuration.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a shim layer around the mcux lpi2c driver to adapt it to the zephyr
i2c interface. This shim driver leverages heavily from the mcux i2c shim
driver because the MCUXpresso SDK provides similar APIs for the i2c and
lpi2c peripherals.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit introduces compile definitions for nrfx, and
lets the build compile in system_nrf9160.c, when building
for nrf9160 SoCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add support for the TRNG device contained in the i.MX RT SoCs. It uses
the existing MCUX driver, and mostly consists in adding the Kconfig and
DTS entries.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Adds support for the device configuration data (DCD), which provides a
sequence of commands to the imx rt boot ROM to initialize components
such as an SDRAM.
It is now possible to use the external SDRAM instead of the internal
DTCM on the mimxrt1020_evk, mimxrt1050_evk, and mimxrt1060_evk. Note,
however, that the default board configurations still link data into
internal DTCM, therefore you must use a device tree overlay to override
"zephyr,sram = &sdram0"
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds support for the boot data, image vector table, and FlexSPI NOR
config structures used by the imx rt boot ROM to boot an application
from an external xip flash device.
It is now possible to build and flash a bootable zephyr image to the
external xip flash on the mimxrt1020_evk, mimxrt1050_evk, and
mimxrt1060_evk boards via the 'ninja flash' build target and jlink
runner. Note, however, that the default board configurations still link
code into internal ITCM, therefore you must set CONFIG_CODE_HYPERFLASH=y
or CONFIG_CODE_QSPI=y explicitly to override the default. You must also
set CONFIG_NXP_IMX_RT_BOOT_HEADER=y to build the boot header into the
image.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Zephyr gecko drivers depend on libraries provided by the vendor. The
same libraries may also be used directly by the application code or
RAIL library. To facilitate the latter use case scenario this commit
adds Kconfig options to independently enable compilation of vendor
HAL library modules.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Updates the MCUXpresso SDK to version 2.5.0 for applicable SoCs.
Wireless (KW*) and legacy (KL25) SoCs were not included in this
MCUXpresso SDK release and are therefore not updated here.
New in this release is SoC-level and board-level support for external
xip flash in the i.MX RT family.
For RT1050, we are now using the MCUXpresso SDK for the EVKB version of
the board, which correponds to an upgrade from A0 to A1 silicon.
However, we don't yet have Kconfigs in place to support A1 silicon part
numbers, and therefore add a simple cmake hack to convert A0 part
numbers to A1 part numbers.
The SDK flash driver interface also changed slightly in this release,
and thus the zephyr flash shim driver is updated accordingly.
Origin: MCUXpresso SDK
License: BSD 3-Clause
URL: mcux.nxp.com
Purpose: Provide device header files and bare metal peripheral drivers
for Kinetis, LPC, and i.MX SoCs.
Maintained-by: External
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Devices with external xip flash like the rt1050 and rt1060 have
additional support files in the MCUXpresso SDK. Enhance the mcux import
script to pick up these files.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Updates the mcux import script to place fsl_iomuxc.* files into the
device-specific folder rather than the shared driver folder.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This file was moved into a device-specific folder in commit
282d95f655 but inadvertantly added back to
the imx driver folder in commit
a4633da9f5.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Kconfig options are often either of the type 'feature' or
'configuration'. Meaning, either an option controls whether a feature
is enabled, or it adjusts/configures an already enabled feature.
Configuration of features should depend on the feature they are
configuring or else noise is created both in the Kconfig output and in
the Kconfig menu.
In this commit we add a dependency from a configuration option to it's
feature option.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This is a temporary fix in one of the MDK files that is a part of nrfx
and it is expected to be replaced with the final solution in the next
update of nrfx.
Signed-off-by: Simen Tinderholt <Simen.Tinderholt@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
