Synchronized up to:
https://github.com/JuulLabs-OSS/mcuboot/commit/ce11597
- corrected bugfix JuulLabs-OSS#830 of upgrade issue in swap-move
- changed default for CONFIG_MCUBOOT_CLEANUP_ARM_CODE to n,
- added MPU register clean-up to this option
- bootutil: ecdsa: Fixed CC310 for nRF devices
- zephyr: made flash_area_erased_val() weak
- serial recovery: allow unaligned last image data chunk
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Enables the mcux flexcan driver on i.mx rt socs by default when
CONFIG_CAN=y.
This fixes a runtime failure in tests/subsys/canbus/isotp/conformance on
the mimxrt1064_evk board:
Assertion failed at WEST_TOPDIR/zephyr/tests/subsys/canbus/isotp/conformance/src/main.c:883: test_main: (can_dev is NULL)
CAN device not not found
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Point to PR 75 of modules/hal/stm32/hal_stm32
stm32cube: update stm32f0 to version V1.11.1
stm32cube: update stm32f1 to version V1.8.2
stm32cube: update stm32f2 to version V1.9.1
stm32cube: update stm32f3 to version V1.11.1
stm32cube: update stm32f4 to version V1.25.1
stm32cube: update stm32f7 to version V1.16.0
stm32cube: update stm32g4 to version V1.3.0
stm32cube: update stm32h7 to version V1.8.0
stm32cube: update stm32l0 to version V1.11.3
stm32cube: update stm32l4 to version V1.16.0
stm32cube: update stm32l5 to version V1.3.1
stm32cube: update stm32wb to version V1.9.0
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
MCUBoot was synchronized up to:
https://github.com/JuulLabs-OSS/mcuboot/commit/c625da4
- Removed the flash_area_read_is_empty() port implementation
function
- Added watchdog feed on nRF dvices.
See CONFIG BOOT_WATCHDOG_FEED option.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Update the hal_nordic module revision to get the following commit:
nrf_power: Fix implementation of workaround for nRF52 anomaly 197
Since the workaround increases power consumption in System ON IDLE,
it should be applied only when the DC/DC converter for REG0 stage is
to be enabled, not regardless of the applied setting as it was done
so far.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Align all sensor drivers that are using stmemsc (STdC) HAL i/f
to new APIs of stmemsc v1.03.
Requires https://github.com/zephyrproject-rtos/hal_st/pull/5
(merged as b52fdbf4b62439be9fab9bb4bae9690a42d2fb14)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fixed stack being to small for joiner operations.
Enabled auto joining even in case of manual start.
Fixed attachement of SED on norfic radios.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the CANopenNode library to latest upstream branch v1.3-master
to bring in SDO and LSS fixes.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Fixes: #28197
Update openthread to build flag changes for fixing #28197.
see zephyrproject-rtos/openthread/pull/29
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update hal_atmel to include vendor files for SAM4L SoC series.
see zephyrproject-rtos/hal_atmel/pull/13.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Updates west.yml to use modules/tee/tfm commit number
143df675557305b61f7930a50459a53a8d2bb097.
Change: make BL2 configurable.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The SX126x supports using DIO2 to control an TX switch, but only if
the switch can be operated using a single control signal. Add support
for RF switches that are wired to a GPIO instead of the radio chip
itself. This makes it possible to use RF switches that require two
control signals (one for the RX port and one for the TX port) by
wiring them to two GPIOs on the MCU.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Some implementation consist of multiple libraries to be linked instead
of one. Added possibility to pass multiple libraries. Additionally
renamed the config name as it was stateing something different than it
does.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
The define for USB_DEVICE_CONFIG_ENDPOINTS erroneously divided
the DTS value for number of USB endpoints by 2.
Signed-off-by: David Leach <david.leach@nxp.com>
Update the driver implementation to use nrfx_clock and nrfx_power
drivers. Update also revisions of the hal_nordic and nrf_hw_models
modules, so that it is actually possible to use those drivers.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update the hal_nordic module revision, to prevent implicit-fallthrough
warnings reported in sanitycheck.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit adds the signing commands and the configuration required
to build a non secure image for a nucleo_l552ze_q.
Signed-off-by: Nolwenn Violette <nolwenn.violette01@st.com>
This PR updates the hal_nordic module revision, to switch to nrfx 2.3.0
and adds new configuration option to enable two stage LFCLK start
sequence.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Expose the exFAT support option to Kconfig, so developer can
enable/disable the exFAT support on FatFs through Kconfig, no need to
touch ffconf.h.
Signed-off-by: Jui-Chou Chung <jui-chou.chung@nordicsemi.no>
This commit adds a NRF_802154_MULTIPROTOCOL_SUPPORT Kconfig switch
that makes it possible to use nRF 802.15.4 radio driver in
a multi-protocol scenario.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
The new LPC WWDT shim driver needs HAL update, which is provided by
the commit 7276046215cfcd4ed3d6723f16f7aeb868b0fb60.
Signed-off-by: Jiří Keresteš <jiri@kerestes.cz>
Commit 135b5ce860 was mistakenly merged with a reference to a Pull
Request instead of a SHA. Correct this so that it references a real SHA.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update LVGL to version 7.0.2. Notable changes in v7 include:
- New drawing system (note that it uses much more ROM than previous
versions)
- New style system
- Some objects have been renamed (current changes do not align yet
Zephyr Kconfig settings with LVGL)
- New fonts with more sizes (e.g. Montserrat, replacing Roboto)
- Theme changes (most have been removed, default is now Material)
Note that constant defaults have been aligned with LVGL.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
To allow hardware crypto acceleration custom mbedtls library needs to be
prepared. However current implementation forces the default library to
be used.
This patch allows not using the default library and passing custom
mbedtls target to use with openthread.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Different switch was used for build to allow including all shim body
in zephyr without the need for building openthread from this repo. This
allows developer to include custom OpenThread sources as part of the
application.
This change is needed as Thread is a subject of certification and
sources provided by zephyr may not necesairly pass certification or be
precertified. User is allowed to use certified OpenThread version
this way.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Update the hal_nordic module revision to include the following commits:
- CMakelists: missing "src" in one path
- nrfx_glue: Fix NRFX_PPI_GROUPS_USED_BY_BT_CTLR definition
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update hal_stm32 module in master manifest to include
latest changes around License information
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add support for the SX126x series of LoRa radios using the
LoRaMAC-Node HAL.
This driver currently makes the following assumptions:
* DIO1 is used as an interrupt line.
* There is an RF switch selecting between the TX and RX ports and
that switch is controlled by DIO2.
* There is either no TCXO or the TCXO is controlled by DIO3.
Specifically, the limitations above mean that modules that use GPIOs
to control the RF switch are currently not supported. Support for such
modules would need changes to the LoRaMAC-Node code.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Add initial support for nuvoton numicro m48x SoC series, basic
init and uart functionality are covered with gpio and clock
directly relies on HAL.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Some options were available in the options.cmake but were not reflected
in Kconfig.
Added possibility to enable additional configuration options for OT.
Some of the options were left commented out as those options are not
yet supported e.g. require Thread 1.2 or require shim changes.
As openthread has gazillion configuration options that are passed as
define value, created generic option for passing any number of those
values separated with space.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Reference an updated head that removes references to reporting
infrastructure when reporting is disabled.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
According to RM, when increasing the CPU frequency, the new number of
wait states to the Flash latency bits must be written and verified
before modifying the CPU clock source and/or the CPU clock prescaler,
to prevent NMI to occur; when decreasing the CPU frequency, after.
Tested with STM32L462 SOC and MSI with several frequencies, both
increasing and decreasing. HSE built, not tested.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi@nexxiot.com>
Update the STM32 HAL to include the stm32l0xx_ll_usb HAL in the
build. This enables USB device support on STM32L0 devices.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Building a couple more files from the SimpleLink SDK in order to support
the ieee8021504 driver for CC13xx/CC26xx.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Update hal_nordic to fix compilation issue with nrfx_nvmc, compilation
issue for NRF_UICR not defined in non-secure build.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
fixes#24706
Fixed issue of possible try to erase non page aligned
size of flash while serving image write command.
The new version has this bug fixed.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Update the hal_nordic module revision, so that the following commit
becomes effective:
nrf_radio_802154: Use chosen zephyr,entropy to get entropy device
Use the label property of the node pointed by "zephyr,entropy" chosen
entry as the name of the entropy device to bind to. The pointed node
does not necessarily need to be a "nordic,nrf-rng" compatible one, what
was incorrectly assumed when CONFIG_ENTROPY_NAME was replaced in commit
5505d0baa66a89848f643120fafad232876df695.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This should fix an issue with setting labels. A label was renamed and
ci-tools did not handle the error.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commits adds a config option to build a PSA trusted-firmware-m
(TF-M) application image for the secure processing environment, and
configures the Zephyr application image for the non-secure processing
environment. The secure and non-secure environment images will be
linked together via the veneer function table that is produced as an
artifact of the TF-M build process.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Add infineon xmc series with XMC4500 support. XMC series comes with,
- CPU operates upto 120MHz
- 3 RAM (PSRAM1 - code, DSRAM1 - data and DSRAM2 - communiation)
- upto 1MB flash
init: clock control & gpio is not done, so SoC initialization directly
relies on HAL. Core operating clock is stored in no_init section, which
is kept under DSRAM1. Only DSRAM1 is used until clock support. Using
PSRAM1 and DSRAM1 needs adaptation in linker script - planned for next
revision.
Note: SystemInit cannot be consumed directly due to vector table +
HAL linker dependency.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Fixed masking defines for eSPI OOB RX and TX transfer
length registers. The transfer length fields are 13 bit.
The incorrect defines masked 14 bits.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Both ST and STM32 modules where using same HAS_STLIB Kconfig
symbol.
Now that each module is createing is own lib, we need to be able
to distinguish libs.
Depends on zephyrproject-rtos/hal_stm32/pull/52
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move syst initialization code to zephyr tree and add
more useful fields (payload length and timestamp) in
SyS-T message packet.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Update mbedTLS commit along with the following fixes:
* Fix naming inconsistencies in some cipher modes, to match core mbedTLS
configs
* Add Kconfig to enable CTR cipher mode
Fixes#22421
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update west.yml to point to hal_ti with the latest changes
from TI SimpleLink SDK 4.10.00.78 for CC13x2/CC26x2.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Update the TI HAL module so that it points to a revision that has been
ported to the new timeout API.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is to update west.yml to point to hal_ti with the latest changes
from TI SimpleLink SDK 4.10.00.07 for CC32xx.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
As part of devicetree update to new devicetree.h We Need to convert
as use of DT_ARM_CORTEX_M4F_CLOCK_FREQUENCY to
DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency) in the hal_ti for the
msp432p4xx SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update STM32WB HCI lib support to version 1.5.0.
Additionally provide a doc section to clarify compatibility
with stm32wb wireless co-processor binaries.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Start SOCKS5 proxy in the net-tools Docker image and run MQTT TLS
tests with SOCKS enabled. Since the MQTT TLS server is already
running as of the previous test, start only the danted daemon.
Rely on mosquitto MQTT port being handled by the Docker image
configuration file instead of specifying it on the command line.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Updating west.yml to point a fix to include proper time.h header in
the HAL. This should fix an issue where clock_gettime() is not
correctly called due to recent change to make it into a system call.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This commit updates `west.yml` to point to the `hal_atmel` commit that
fixes the incorrect GMAC priority queue register offsets for SAMV71.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Update manifest to a version of EDTT that supports receiving this
response in the unknown command response test (HCI/GEV/BV-01-C).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
There was no way to use Openthread CoAP api in zephyr application so
far. These changes enable the feature. Now you can fully use CoAP
communication in an application working in Thread network.
Signed-off-by: Lukasz Maciejonczyk <Lukasz.Maciejonczyk@nordicsemi.no>
This commit updates the west.yml to point to the CMSIS module commit
that updates the CMSIS version to 5.7.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the west.yml to point to the commit that adds the
CMSIS-Core(A) and defines the configurations to enable it, in
preparation for the AArch32 Cortex-A architecture support in Zephyr.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Adds a shim layer around the mcux lpc flexcomm driver to adapt it to the
zephyr i2c interface. It leverages heavily from the existing mcux lpi2c
shim driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Update hal_atmel to fix wrong __MPU_PRESENT definition.
see zephyrproject-rtos/hal_atmel/pull/10
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Update the hal_nordic module revision so that the nrf_radio_802154
does not use the CONFIG_ENTROPY_NAME symbol which is no longer used
in the Zephyr tree.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The board name for the nRF52840 Dongle, so far known as
nrf52840_pca10059, is renamed to nrf52840dongle_nrf52840. Its
documentation and all references to its name in the tree are updated
accordingly. Overlay and configuration files specific to this board are
also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use <arch/arm/aarch32/cortex_m/cmsis.h> include instead of <zephyr.h> to
get access to Cortex-M CMSIS API.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add CSMA CA capability for the `ieee802154_nrf5` radio driver along with
appropriate implementation in the `nrf5_tx` function.
Introduce 802.15.4 radio driver with CSMA/CA support enabled. Add help
text, mentioning a list of peripherals occupied by the radio driver.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
PR https://github.com/zephyrproject-rtos/mcuboot/pull/8 was mistakenly
merged instead of pushed, which made the last 4 commits of zephyr's
mcuboot divergen in SHA with respect to the upstream ones.
In order to preserve the status of the zephyr mcuboot repo as an
exact mirror of the upstream one, a snapshot has been taken to preserve
the current SHA (0f4463caec3c3a8fac1350d0d6dfbee678a8ce06) and then the
master branch has been reset to the upstream equivalent
(7e7b4ad1999bf148f88059195f8d2e1d3dccf190). This commit switches the
pointer to the latter, but the mcuboot code itself is identical.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Include build assert macros rework.
Update pip requirements by cbor package required by MCUBoot since
https://github.com/JuulLabs-OSS/mcuboot/pull/674 was merge.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
