Adds a K_DELAYED_WORK_DEFINE, matching the K_WORK_DEFINE macro, with
accompanying Z_DELAYED_WORK_INITIALIZER macro.
Makes k_delayed_work_init a static inline function, like its K_WORK
counterpart.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
When adding the new partition to a memory domain the system must
assert that it does not overlap with any other existing partitions
in the domain.
Test to add new partition which has same start address as an
existing one, after that must happen an assertion error indicating
that new partition overlaps existing one.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Nothing in the API description the delayed work structure sanctions
direct reference to internal fields. Do not assume that a delayed
work item can be initialized in any way other than by invoking the
delayed work item init function. Do not assume that a delayed work
item can be submitted without delay by invoking k_work_submit() with a
reference to the contained work item.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The socket pairs created for this test when run under user mode are
accessible only from the thread that created them. Although it is
possible for that thread to grant access to another thread:
* there does not appear to be a way to do that when referencing a
descriptor rather than a pointer to a kernel object;
* there is no public API that supports granting the object rights to a
user thread that animates a work queue.
Until these gaps are addressed use the system work queue run
supervisor-mode threads to verify the asynchronous behavior of the
API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Adjust the test thread priority so that the test / IP stack
has a chance to run and the test passes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In test_pipe_user_thread2thread(), what should be tested is
the pipe, which allocated with k_object_alloc(), rather than
"pipe" and "kpipe". That two pipes are already teseted in
test_pipe_thread2thread().
Signed-off-by: Steven Wang <steven.l.wang@linux.intel.com>
A socket which didn't undergo completed connect() or accept() calls
should react with ENOTCONN to recv() call. This test checks both
a freshly created socket ("client" one) and a socket in LISTEN
state ("server").
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Factor out the CONFIG_CBPRINTF_LIBC_SUBSTS exception.
Remove redundant lines and obsolete comment.
Make some code pattern more consistent.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
subpress warnings from llvm:
warning: absolute value function 'abs' given an argument of type
'int64_t' (aka 'long long') but has parameter of type 'int' which may
cause truncation of value [-Wabsolute-value]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a new CONFIG_MPU which is set if an MPU is enabled. This
is a menuconfig will some MPU-specific options moved
under it.
MEMORY_PROTECTION and SRAM_REGION_PERMISSIONS have been merged.
This configuration depends on an MMU or MPU. The protection
test is updated accordingly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add build test for Xilinx drivers for devices which are not present on
any in-tree boards.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Make sure that "%ld" gets a long int argument.
This commit eliminates a couple of compiler warnings of this kind:
test_fat_file.c: In function 'test_file_truncate':
test_fat_file.c:180:11: error: format '%ld' expects argument
of type 'long int', but argument 2 has type 'off_t' {aka 'int'}
[-Werror=format=]
180 | TC_PRINT("Original size of file = %ld\n", orig_pos);
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
CONFIG_FPU selects support for formatting floating point numbers,
which increases the stack requirements for cbprintf, causing this test
to overrun its stack.
Since this test doesn't format floating point numbers, use
CBPRINTF_NANO to revert to using the small-footprint formatter.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Tests that include floating-point format specifications may need
cbprintf FP support. Make sure it's available.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Although flags with pointers are not defined behavior, there is a
desire to have them work, so add a test and fix the complete
implementation so it passes.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Represent IPv6 addresses as groups of 16-bit values in test vectors.
This commit corrects the following two test issues on big endian
systems:
START - test_ipv6_pton_1
Failed to verify ff08::
against 0:ff08::
START - test_ipv6_ntop_1
Failed to verify 0:ff08::
against ff08::
Makes the following tests pass on qemu_leon3:
- net.util
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
We have a use case for checking the results of a DT_PROP_HAS_IDX()
call with COND_CODE_1(). That won't work because its expansion is an
integer comparison; COND_CODE_1() expects a literal 1 or 0.
Adjust the macro implementation so it expands to a literal 1 or 0.
Make this work even when the index argument needs an expansion while
we're at it.
Fixes: #29833
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The test reads and writes outside the bounds of an array allocated on
the stack in check_input(). This commit disables the test on SPARC.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
The BIT_INDEX() macro assumed little-endian. This commit adds
big-endian support, conditioned on the preprocessor define
CONFIG_BIG_ENDIAN.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Using the same implementation as the rest of Zephyr reduces code size.
Update options and expected results for formatting test.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The minimal libc provided by Zephyr can use the Zephyr system
implementation rather than have its own implementation.
When combined with CBPRINTF_NANO some sprintf tests must be
skipped as they assume a more capable libc. Add an overlay
that supports testing this non-default combination.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Tests for most paths through the conversion infrastructure. Expected
output can be validated with the host libc by setting USE_LIBC within
the source.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
These tests were suppressed when KERNEL_COHERENCE=y because of a
feature collision with CONFIG_POLL that has since been fixed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These test variants were there to test an older backend to the kernel
queue utility that used k_poll() as the blocking mechanism. That code
got removed a while back, so these tests were just dupicates of the
main cases now. Remove.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add a generic test case for SoC power management when supported.
Results in CPU to enter sleep/deep sleep in single/multi thread cases.
It uses hook to track entry/exit to sleep state.
It calculates sleep/deep sleep latency.
Signed-off-by: Shihao Shen <shihao.shen@intel.com>
Added test which can be used to verify performance of ring
buffer algorithm.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Previously, ring buffer had capacity of provided buffer size - 1. This
trick was used to distinguish between empty and full states. It had one
drawback: ring buffer could not be used as a pool of equal sized buffers
(using ring_buf_put_claim and ring_buf_get_claim).
Reworked internals to use non wrapping head and tail. Since they are
non wrapping, there is no issue with distinguishing between empty and
full. Since this appraoch would be vulnerable to wrapping on 32 bit
boundary, added a mechanism which periodically reduces all indexes to
avoid 32 bit wrapping.
After this rework, buffer has one byte more capacity. Simple test shows
slight performance improvement.
Updated tests to reflect increased capacity and added test to check if
it is possible to continuesly allocated 2 buffers of half ring buffer
size.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Make this driver multi-instance and use the new API.
Notes for sensorhub mode:
In case of multiples devices it is possible that some of them
has i2c slaves attached to it (sensorhub mode) but not the
others. Since the driver is configured in the same way for
all the instances (CONFIG_SENSORHUB=y), the routine that initialize
the sensorhub part does not fail anymore in case no slaves
are found for a particular instance. Instead, those non-sensorhub
driver instances will set the shub_inited flag to false and
will totally ignore the feature.
Notes for triggers:
In case of multiples devices the device pin the interrupt wire is
attached to can be different (INT1 or INT2 pin). So, this
information has been moved in DTS and then stored in the
specific instance config structure.
Currently the driver is able to handle a sngle interrupt line
at a time attached to either INT1 or INT2.
MOreover, the interrupt initialization for a driver instance proceed
only if the drdy has been configured in its DT, else it returns ok.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Fix maximum Advertising Channel PDU payload size calculation
by including the Common Extended Advertising Payload Format
overload alongwith the AD data maximum size supported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the test procedure that requires greater than 31 byte
PDU when AD data and Sync Info structure be present in the
Advertising channel PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Convert handful of users of DEVICE_INIT to DEVICE_DEFINE or
SYS_DEVICE_DEFINE to allow deprecation of DEVICE_INIT.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Put infrastructure for the following HCI commands/events in place:
* LE Set CIG Parameters command
* LE Remove CIG command
* LE Create CIS command
* LE Accept CIS Request command
* LE Reject CIS Request command
* LE CIS Established event
* LE CIS Request event
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Adds a `destroy` callback to the `struct bt_gatt_indicate_params` which
is used to signify to the application that the indication operation has
completed and the struct instance can be freed/destroyed.
This is required as the number of indication value callbacks that will
be triggered is not known by the caller when the `conn` parameter is
`NULL`.
Tracking when this callback should be run is mananged by a private
reference counter inside the struct.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the signature of the `bt_gatt_indicate_func_t` callback type by
replacing the attr pointer with a pointer to the
`bt_gatt_indicate_params` struct that was used to start the indication.
This allows the callback to free the `bt_gatt_indicate_params` instance
if it was allocated from storage, while still allowing the
`bt_gatt_attr` value to be accessed through `params->attr`.
Allocating the `bt_gatt_indicate_params` instance from storage is
desirable as multiple indications can be queued, however each instance
must be valid until the callback is run.
Implements API update from #29357
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Some platforms may have multiple RAM regions which are
dis-continuous in the physical memory map. We really want
these to be in a continuous virtual region, and we need to
stop assuming that there is just one SRAM region that is
identity-mapped.
We no longer use CONFIG_SRAM_BASE_ADDRESS and CONFIG_SRAM_SIZE
as the bounds of kernel RAM, and no longer assume in the core
kernel that these are identity mapped at boot.
Two new Kconfigs, CONFIG_KERNEL_VM_BASE and
CONFIG_KERNEL_RAM_SIZE now indicate the bounds of this region
in virtual memory.
We are currently only memory-mapping physical device driver
MMIO regions so we do not need virtual-to-physical calculations
to re-map RAM yet. When the time comes an architecture interface
will be defined for this.
Platforms which just have one RAM region may continue to
identity-map it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Execute tests are disabled for RISC-V because is isn't able
to set an execution restriction. From RISC-V documentation:
"Instruction address-translation and protection are unaffected
by the setting of MPRV"
MPRV is used to apply memory protection restriction when CPU is
running in machine mode (kernel).
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Add a memory region allocation for RISCV architecture.
Also fix an arbitraty value which can't work with
RISC-V granularity.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Add support for the following tests:
- test_write_control
- test_disable_mmu_mpu
- test_read_priv_stack
- test_write_priv_stack
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Allow application to enable L2CAP dynamic channels without support
for Enhanced Credit Based Flow Control (CBFC).
Since these are separate features in the qualification it should
be possible to qualify L2CAP connection oriented channels without
also having to qualify L2CAP enhanced credit based flow control.
The L2CAP/LE/REJ/BI-02-C conformance test will fail when enhanced CBFC
has not been selected in the ICS.
The lower tester expects that since the Enhanced CBFC is not supported,
the command L2CAP_CREDIT_BASED_CONNECTION_REQ should be met with an
L2CAP_COMMAND_REJECT_RSP and not an L2CAP_CREDIT_BASED_CONNECTION_RSP.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add doxygen comments for details of test_pipe_thread2thread().
By the way, plan to do the same thing to all test cases
in test_pipe_contexts.c.
Signed-off-by: Steven Wang <steven.l.wang@linux.intel.com>
Adds various tests for mounting ELM FAT FS with FS_MOUNT_FLAG_NO_FORMAT
and FS_MOUNT_FLAG_READ_ONLY, and operations on read-only mounted
file system.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adds various tests for mounting LittleFS with FS_MOUNT_FLAG_NO_FORMAT
and FS_MOUNT_FLAG_READ_ONLY, and operations on read-only mounted
file system.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
We provide an option for low-memory systems to use a single set
of page tables for all threads. This is only supported if
KPTI and SMP are disabled. This configuration saves a considerable
amount of RAM, especially if multiple memory domains are used,
at a cost of context switching overhead.
Some caching techniques are used to reduce the amount of context
switch updates; the page tables aren't updated if switching to
a supervisor thread, and the page table configuration of the last
user thread switched in is cached.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We need to make sure that if we migrate a thread to another
memory domain, the migration process doesn't cause the target
thread to explode. This is mostly a concern on SMP systems;
the thread could be running on another CPU at the same time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds CLAMP macro to complement the current min/max macros, as well as a
gcc specific Z_CLAMP macro for single-evaluation expansion.
CLAMP combines the functionality of MIN and MAX, eliminating the
bug-prone usage of MIN(MAX(value, FLOOR), CEIL) found throughout the
codebase in every possible combination.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add some comments about rbtree to make it more readable
Add more detail infos to make the purpose and process
of the test cases more clear which include test goal,
test step, input, judging criteria, constraints, etc.,
and these can be seen in our Zephyr documentations.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Do minor change of the descriptions and doxygen group name in order to
pave the way for generation the test specification.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
We can't control ticks accurately enough to detect the transition
between on a queue and being handled, so relax the checks to make
things pass.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Modify the gen_isr_table test case to using ztest. Although it was
split up to three test cases, the test logic and the tested platform
are totally the same as previous one.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
The commit changes error handling by fs_unmount; the function will
return -EINVAL if mount point, described by mp, is not mounted or
-ENNOTSUP when unmounting is not supported by the driver; in the second
case it will also log error.
Additionally to the above changes, checks for correct mnt_path and
mnt_path, within fs_unmount, have been removed as they are not needed;
only the fs_mount_t->fs pointer is needed to decide whether system is
mounted or not.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit moves fs_mount parameter verification above mutex lock.
The list of mount points is now checked before attempting to obtain
file system API pointer.
All modifications to mount point data structure, given as a parameter
to the fs_mount, are only applied after every other operation needed
have completed successfully, immediately before adding the mount point
to the list of mount points.
The fs_mount will a warning when mounted file system does not support
unmount.
When a file system does not provide mount function, the -ENOTSUP error
will be returned instead of -EINVAL.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Added flash_area_erased_val() function for get value of erased
byte of memory which is under flash area.
This function already exist in MCUBoot and zephyr dfu subsystem
which makes simultaneous usage of both impossible.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Avoid sending duplicate GAP_EV_DEVICE_FOUND because adv_buf->len was
not cleared.
With this change, the following tests become more stable in a noisy
environment:
- GAP/BROB/OBSV/BV-01-C
- GAP/BROB/OBSV/BV-02-C
- GAP/BROB/OBSV/BV-05-C
- GAP/BROB/OBSV/BV-06-C
- GAP/DISC/RPA/BV-01-C
Co-authored-by: Konstantinos Sotiropoulos
konstantinos.sotiropoulos@nordicsemi.no
Signed-off-by: Ryan Chu <ryan.chu@nordicsemi.no>
As documented in doc/guides/dts/api-usage.rst, the generated
devicetree macros should be considered an implementation detail.
Replace direct usage of one with an equivalent that uses the API.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Disable assert checks, to build a smaller firmware and also
to uncover any unused variables and arguments.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This test is a little subtle: it wants to spawn three threads to run
and be switched out by a timeslice interrupt. And it wants to consume
half a time slice itself before it starts running. And, because
timeslicing runs out of the same tick framework in the timer driver,
it needs to align to the start of a tick before the process starts.
And further: it does its own time math not in ticks but in timer
cycles, so it's quite sensitive to slop.
But it's "synchronize to tick boundary" code was actually
synchronizing to a CYCLE boundary, which is just wrong. And it was
doing this in the wrong order. It was resetting the timeslice first
and then synchronizing to a tick by spinning, which means that the
test was always going to begin as much as a tick late. Do the tick
synchronization (via a sleep) first.
Finally, the manager thread that was spawning the new threads lives at
the same priority as the highest priority child threads, which means
it can potentitially wake up on the semaphores that they are giving in
the middle of the test and consume CPU unexpectedly. Make sure it's
sleeping for the duration.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There is a race condition between the child threads
exiting, and the child threads getting re-used in the
next scenario. This reproduces more often on SMP systems.
Close the race by joining on the child threads before
exiting any test scenario.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In the flash partition definitions for ARM boards,
the link to the legacy partition macros does not
exist any more. The commit cleans up the partition
definition by removing this link.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Now that we have a BMI160 driver and emulator pair that support both
I2C and SPI, add a test that runs over both buses.
Signed-off-by: Simon Glass <sjg@chromium.org>
1. Add more detail info to make the purpose and process
of the test cases more clear which include test goal,
test step, input, judging criteria, constraints, etc.,
and these can be seen in our Zephyr documentations.
2. Add some negative test code.
Signed-off-by: YouhuaX Zhu <youhuax.zhu@intel.com>
The existing testcase's doxygen describes are the general
implementation idea of a function.On this basis, adding
more descriptive statements to describe which conditions need
to be preset when running the testcase, which test techniques
are applied, and describe the testcase Design steps in detail.
Make it more readable.
Signed-off-by: Ying ming <mingx.ying@intel.com>
1. Add more detail info to make the purpose and process
of the test cases more clear which include test goal,
test step, input, judging criteria, constraints, etc.,
and these can be seen in our Zephyr documentations.
2. Add some negative test code.
Signed-off-by: YouhuaX Zhu <youhuax.zhu@intel.com>
1. Add more detail info to make the purpose and process
of the test cases more clear which include test goal,
test step, input, judging criteria, constraints, etc.,
and these can be seen in our Zephyr documentations.
2. Add more negative testcase.
Signed-off-by: YouhuaX Zhu <youhuax.zhu@intel.com>
remove "platform_allow" to enable test case run on more platforms,
only a few archs and platforms are excluded.
Signed-off-by: Meng xianglin <xianglinx.meng@intel.com>
This suite now uses far less memory and is much simpler.
We still maintain coverage of all the memory domain APIs
and ensure that the maximum number of partitions can be
applied.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The tests test_mem_part_auto_determ_size and
test_mem_part_auto_determ_size_per_mpu are supposed to
just be checking the construction of automatic memory
partitions.
test_mem_part_auto_determ_size had a bunch of extraneous
stuff covered by other test cases and reserved three
different thread stacks.
These two tests have been drastically simplified and
combined.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
test_mem_part_inherity_by_child_thr duplicates logic already
present in test_permission_inheritance. That test puts a
buffer called 'inherit_buf' in 'inherit_memory_partition'
and shows that it is accessible by a child thread by
writing to it.
Delete this unnecessary test.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Tests are now grouped in the C file they occur in.
test_mark_thread_exit_uninitialized no longer occurs twice.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
put all globals only used in this C file in static scope, which
revealed that a few of them were not used at all.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If KPTI is not enabled, then the US bit will be set for all
the default memory partitions in the _app_smem section.
The error printed when a mismatch occurs now shows the
expected flags.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We now just use two memory domains; the default domain and an
'alternate_domain' used for tests that need to handle a memory
domain switch.
Along the way the test code was simplified.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds the necessary bits to initialize TLS in the stack
area and sets up CPU registers during context switch.
Note that this does not enable TLS for all Xtensa SoC.
This is because Xtensa SoCs are highly configurable
so that each SoC can be considered a whole architecture.
So TLS needs to be enabled on the SoC level, instead of
at the arch level.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The code that made aligned_alloc work with the 4-byte heap headers was
requesting a block of the correctly padded size, and correctly
aligning the output buffer within that memory, but it was using the
UNALIGNED chunk size for the buffer as the final size of the block
with splitting off the unused suffix. So the final chunk in the
buffer was could be incorrectly returned to the heap and reused,
leading to overlap.
Compute the chunk size of the output buffer based on the
already-aligned output pointer instead.
Initial investigation and fix from Andy Ross <andrew.j.ross@intel.com>.
I reworked his fix, created a test case, and stolen his commit log.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add support to build all current modem drivers (WNCM14A2A, GSM PPP, and
ublox-sara). We need a unique config for ublox-sara to be built since
the networking params conflict with other modem drivers.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The struct fs_file_system_t is only useful when defining file system
drivers and is not required for typical application development,
that is why it has been moved to separate file fs_sys.h.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
For compatibility layers like CMSIS where thread objects
are drawn from a pool, provide a context pointer to the
exited thread object so it may be freed.
This is somewhat obscure and has no supporting APIs or
overview documentation and should be considered a private
kernel feature. Applications should really be using
k_thread_join() instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a k_usleep() in test_timer_duration_period test to align ticks
before starting the timer. This fixes some rare off-by-1 failures.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Extend the test_single_read test case to catch RX_RDY events that are
not expected to appear.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
There are now two timer drivers available for various xtensa
platforms. Select based on their driver and not the architecture.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The k_poll implementation places a struct _poller on the stack and
shares it with other threads, which is incompatible with the
KERNEL_COHERENCE model of cached stacks.
Make this a hard build failure instead of a kconfig dependency for
clarity. The failures if a user actually enables both are subtle and
difficult to debug.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Ensure that both the main thread and any static threads are
properly assigned to the default memory domain.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test is generating build warnings as it is making
checks that can never be false.
This reverts commit a4f1a5f58f.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Found out that important requirements are not tested by current
kernel objects tests. Decided to fix that situation
New added tests:
1. test_kobj_assign_perms_on_alloc_obj()
Create kernel object semaphore, dynamically allocate it from the
calling thread's resource pool.
Check that object's address is in bounds of that memory pool.
Then check the requestor thread will implicitly be assigned
permission on the allocated object by using
semaphore API k_sem_init()
2. test_no_ref_dyn_kobj_release_mem()
Dynamically allocated kernel objects whose access is controlled by
the permission system will use object permission as a reference count
If no threads have access to an object, the object's memory released.
3. test_krnl_obj_static_alloc_build_time()
Take addresses of the kernel objects which are statically allocated
during the build time and verify that they are not null.
That kernel objects shouldn't require manual
registration by the end user.
4. Clean-up. Removed unused variable from userspace test.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The IIS2ICLX is a high-accuracy. ultra-low noise, low-power
two-axis linear accelerometer which can be interfaced through
either I2C or SPI bus.
Its high accuracy, stability over temperature and repeatability
make IIS2ICLX particularly suitable for inclination measurement
for industrial applications (inclinometers).
https://www.st.com/resource/en/datasheet/iis2iclx.pdf
This driver is based on stmemsc i/f v1.03.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
I reviewed that test to find a bug root cause, unfortunately,
bug dissapeared, so nothing to fix, but I noticed several
misprints and wrong comment styles. It's something at least.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Code checks if gpio_port_set_masked_raw overwrites masked pins.
It should detect that the attempt to set only the input pin to zero also
affected the output pin.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Add the first API functions that directly deal with node dependency
ordinals as determined by edtlib:
- DT_DEP_ORD(node_id): node_id's ordinal
- DT_REQUIRES_DEP_ORDS(node_id): list of dep ordinals for node_id's
direct dependencies
- DT_SUPPORTS_DEP_ORDS(node_id): list of dep ordinals for nodes
depending directly on node_id
- DT_INST_ equivalents
This is not meant to be an exhaustive set of macros related to
dependency ordinals; rather, it's a starting out point meant to enable
initial struct device dependency tracking work. We can add more if
needed.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Stable API change: modify parameters of clock_control_async_on which
previously took a structure which contains list node, callback and user
context. Removing list node and replacing structure with two parameters:
callback and user context. List node is removed because it has no use
in current API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added test which is calling uart_poll_out from various contexts and
asynchronous/interrupt driven API. Test is validating that calls
can be preempted at any moment and no data is lost.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The existing testcase's doxygen describes are the general
implementation idea of a function.On this basis, adding
more descriptive statements to describe which conditions
need to be preset when running the testcase, which test
techniques are applied, and describe the testcase Design
steps in detail. Make it more readable.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
This was causing stack usage to be right on the margin
for some platforms, without a clear reason why it
needs to be here (it was copied from another test case
which no longer exists).
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Both threads, 4 and the ztest_thread (test_thread_join) where
joining thread5. If thread 4 is scheduled before the
main thread it will be dead before the main thread
had chance to join it. Just changed thread 4 priority to ensure that
this problem does not happen.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The cached device pointer must be placed in memory that allows user
mode invocation of the test functions to access it.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The legacy macros were first deprecated in Zephyr v2.3. Now that
Zephyr v2.4 has been released, that makes two releases where these
macros have been deprecated, so it's OK to remove them.
This leaves support for legacy binding syntax in place. Removing that
is left to future work.
We need to update various pieces of documentation related to flash
partitions that never got updated when the new API was introduced.
Consolidate this information in the flash_map.h API reference page,
since that's really where users will run into it. This also gives us
the opportunity to improve this documentation.
Adjust a couple of kconfigfunctions.py and sanitycheck bits to use
non-legacy edtlib APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We don't need 3 different threads/stacks and the stack size
can be smaller, the threads don't do much.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Detection of transition from delayed to pending can fail in some cases
if the timeouts are not precisely managed.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The current implementation of delayed work will cancel and re-submit a
pending work item that is no-wait, putting it at the back of the
queue. Verify this behavior.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The current implementation of delayed work retains a pointer to the
queue unless the work item is successfully cancelled, preventing a
completed item from being resubmitted to a different queue. Confirm
this behavior and its workaround.
Also validates some unsuccessful cancel return values.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Pass a pointer to the work item member rather than casting the
augmented work item pointer to a base work item pointer.
Also the return type of k_work_pending() is bool, so use that rather
than comparing it to zero.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add build only tests to cover Periodic Advertising in
Advertising state and Periodic Advertising in
Synchronization state support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Modified net_ipv4_is_addr_mcast() to not wrongly classify an IPv4
broadcast address as a multicast address.
Signed-off-by: Oliver Hitz <oliver@net-track.ch>
Added test implementation for test driven development of
Periodic Sync feature support in the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Instead of 0, which can happen to be a sampling result, use for marking
empty buffer entries a value that is not supposed to be written in the
buffer by an ADC driver. This value defaults to SHRT_MIN but can be
overriden, if needed, for particular boards.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The memset in the 'blow_up_stack' function can be optimized
away as it is called in the end of the function on the buffer
allocated on the stack (so it has 'no' effect on program
execution)
The 'stack_smasher' call can be optimized away as it's results
isn't used anywhere and stack_smasher function has no visible
side effects.
Fix that by disabling optimization on these functions.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
We use several variables (like do_sleep, etc...) to share
statuses between threads, however they are not marked as
volatile. That may lead to their unexpected optimization
(tat really happens with ARC MWDT when loop with waiting
on the sleep timeout in 'wakeup_src_thread' is optimized
away). Fix that by defining these variables as volatile.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
As we don't use memory allocated in test_memalloc_max the
malloc call can be optimized away (that really happens with ARC
MWDT toolchain). That breaks the test. So disable optimization
for test_memalloc_max function.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
The __attribute__((optimize("-O0"))) attribute is used to disable
optimization of some test functions. ARC MWDT toolchain doesn't
support it, however it supports __attribute__((optnone)) with
similar functionality.
Define __no_optimization attribute across all toolchains so it
can be used in tests.
NOTE: we don't define __no_optimization for XCC as it includes
GCC header with __no_optimization defined.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Compiler may optimize away write to RO region and following
readback so we won't trigger fault (that actually happens with
arc MWDT toolchain).
Add volatile to avoid that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Added conf files to test advertiser, broadcaster, peripheral
and central state/role build combinations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The test_triggered_wait_expired test submits the items with
2*SUBMIT_WAIT timeout and waits for the timeout to expire
so the items are being worked on. It waits one SUBMIT_WAIT
and checks none of the items have started. Then waits
another SUBMIT_WAIT to check if they have all finished.
However, since the timeout is at 2*SUBMIT_WAIT, the work
queue may have just started going through the list of items.
This means some items may have started while others have not.
This results in the test failing as not all items have
finished. So lengthen the second sleep to allow items to
finish before checking.
Fixes#28589
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Using the SPI emulator we can create a simple test for the BMI160
driver. Add this an enable it for native_posix.
Signed-off-by: Simon Glass <sjg@chromium.org>
The existing tests is for generic sensor drivers. To make room for a
driver-specific one, move it into a subdirectory.
Signed-off-by: Simon Glass <sjg@chromium.org>
In case a "required: False" enum binding doesn't mention a
default value, but a default value makes sense to be set in the code,
DT_ENUM_IDX_OR could be used to provide the default idx to be used.
New macro comes with appropriate tests.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add more detail description for test case of arch_curr_cpu() and
arch_sched_ipi(). This is in order to make the purpose and process of
the test cases more clear.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
The L4 connected/disconnected events are usually used to detect
when the application is connected to the network. Unfortunately
if the device has also a static address, then the connected event
might be created (for the static address) even if DHCPv4 is not
ready yet and application would not be able to connect (yet) to the
network. In order to allow the application to fine tune the network
connection creation, generate start, bound and stop events for DHCPv4.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
STM32H7 and STM32F7 guarantee last write RAM retention over reset,
only for 64bits.
See details in Application Note AN5342
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Update pm test case to fix some error last time submission. Add test
case that simply check device_pm_enable and device_pm_disable interface.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
Add new tests to improve of the Zephyr QA testing of the memory
protection for memory domains and partitions.
I created new tests for memory protection->memory partitions for
the requirements which I think necessary to be tested.
I added Doxygen tag for each test to make it clear to understand
what each test is doing and how.
New tests for memory domains and partitions:
-test_mem_domain_api_kernel_thread_only()
By creating that test I wanted to prove that access to memory
domain APIs must be restricted only to supervisor threads.
At the same time I wanted to prove that system can support the
definition of memory domains.
-test_mem_part_auto_determ_size()
By creating that test I want to prove that system can automatically
determine application memory partition base addresses and sizes
at build time, determined by its contents. Also system can support
definition of memory partitions. At the same time test proves that OS
supports adding and removing a thread from its memory domain
assignment.
-test_mem_part_auto_determ_size_per_mmu()
That test is very important and it proves that memory partitions are
automatically sized and aligned per the constraints of the platform's
memory management hardware.
-test_mem_part_inheirt_by_child_thr()
Prove that child thread inherits memory domain assignment of its
parent.
-test_macros_obtain_names_data_bss()
Test system provides tools to obtain the names of the data and BSS
sections related to a particular application memory partition at
build time.
-test_mem_part_assign_bss_vars_zero()
Test that global data and BSS values can be assigned to application
memory partitions using macros at build time. Test that BSS values
will be zeroed at the build time.
1. According to the reviews made changes.
2. Switched test_mem_part_assert_add_overmax
and test_create_new_invalid_prio_thread_from_user
That way I exposed problem (bug) with assertion
in L171 kernel/mem_protect.c
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This commit adds the following tests:
* check eventfd with initval != 0
* check write counter overflow
* check if eventfd is blocked after read
* check if writing zero does not unblock
* check if nonblocking eventfd poll() behaviour is identical to blocking
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Here, we include some addtional tests for durations that have
sub-microsecond components.
1ns => k_busy_wait(0). Round to 1us.
1us + 1ns => k_busy_wait(1us). Round to 2us.
1s + 1ns => k_busy_wait(1000000us). Round to 1000001us.
1s + 1us + 1ns => k_busy_wait(1000001us). Round to 1000002us.
Fixes#28483
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
No need to mix super short version of names with other structures
having full name. Let's follow a more relevant naming where each and
every attribute name is self-documenting then. (such as s/id/apic_id
etc...)
Also make CONFIG_ACPI usable through IS_ENABLED by enclosing exposed
functions with ifdef CONFIG_ACPI.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove code and associated tests and Kconfig related to
SETTINGS_USE_BASE64 that was deprecated in Zephyr 2.2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Show that trampolining thread self-aborts to the idle thread
works and that we have sufficiently set the idle stack size
for this, PM hooks, and dynamic kernel object cleanup.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
No functional change, just add some extra printouts and comments
to make it a little clearer the expected sequencing.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test takes a pathologically long time to run. The PR
this is part of takes 10x as long to run the test as it did
before.
Such behavior cannot be reproduced on real Xtensa hardware,
where the test completes on an Intel S1000 in 4 seconds.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Enable interrupts before switching to main()
in cortex-m builds with single-thread mode
(CONFIG_MULTITHREADING=n).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Reduce the error between the timer (which is tick-aligned) and
busy_wait (which is not) by aligning the busy_wait to start at
a tick boundary.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
According to comment memset() should be used instead of memcpy().
There is no need to access to address 0x0.
Fixes#28691
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Some ARM platforms, now, enable HW Stack Protection by
default in the Board definition. So if some tests
need to run without stack protection, it is not
sufficient to disable TEST_HW_STACK_PROTECTION;
we need to explicitly disable HW_STACK_PROTECTION.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move init_timer_data() out of k_usleep() tick alignment.
Compute rem_ticks just after busy_wait_ms() to avoid slew
due to 'now' and 'rem_ms' computations.
With slow CPU 32MHz: -2 Ticks.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Insert k_usleep(1) just before k_timer_start()
to guaranty tick alignment for step "test_timer_k_define"
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
The up_squared board suffers the same issue as qemu_x86_64
where a bigger stack is needed but CMSIS has a limit on
how big the stack can be. This results in stack overflow
on one of the test.
Also, the thread API tests are not designed with SMP in mind.
The osThreadGetCount() would return a value smaller than
expected. This function only counts queued threads, where with
SMP, there are more CPUs running threads and thus fewer queued
ones.
So exclude up_squared from the test.
Fixes#27571
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Removing frdm_k64f from the allowed list of platforms to test.
Power management support has not been added and/or verified for
frdm_k64f platform yet.
Fixes: #27821
Signed-off-by: David Leach <david.leach@nxp.com>
When doing test_thread_join with OTHER_ABORT_TIMEOUT, the interval
between two k_uptime_get() includes the two k_thread_create() which
means the interval delta does not exactly count the time spent
in k_thread_join(). On x86_64 with userspace, time spent inside
k_thread_create() scales with memory size as it needs to create
a new page table for the thread. So to actually measure
the time spent in k_thread_join(), the locations where uptime is
obtained need to be moved.
Fixes#28549
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
nRF51 MCUs are Cortex-M0 running with a 16 MHz clock. The overhead of
work done in k_usleep() requires adding three more ticks (92 us) to the
expected loop iteration time. (Two ticks is enough on most boards, but
some require a little more time.)
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
- They all had the wrong prototype and hard-casts can sometimes
lead to problems
- Several renamed to something more descriptive
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Lowering the connection timeout in order to avoid spin lock assert
in frdm_k64f device. This error was seen with this device
ASSERTION FAIL [z_spin_lock_valid(l)] @ zephyr/include/spinlock.h:92
Recursive spinlock 0x20003590
Fixes#28602
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When added bluetooth over USB shell overlay, the
file was by mistake added with wrong extension.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
For boards with (relatively) large memory, the test which dumps
page tables takes a long time to finish. The default timeout of
sanitycheck is not enough for those boards. UP Squared board is
such a board. So limits to pagetable dumping to boards with
less than 32MB.
Fixes#28548
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
To improve Zephyr security, I decided to create a test
to check upon exit of a system call back to the calling thread,
the kernel scrubs CPU registers for sensitive data.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Align to ticks so the first iteration sleeps long enough
(k_timer_start() rounds its duration argument down, not up,
to a tick boundary)
Fixes#28319
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Fix the structures so that they are compliant with the stricter checks
of GCC 10.x, and at the same time correct a bug that was present in the
handling of the GAP Start Advertising BTP command.
Fixes#28375.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add regex in testcase.yaml to verify the kernel will dump
thread id information and error type when exception occurs.
Signed-off-by: Ying ming <mingx.ying@intel.com>
Modify the location of the test case file because new
test cases need to be submitted. If the old test
cases are not in a folder, CI will fail and
prompts "the command exited with status 1".
Signed-off-by: Ying ming <mingx.ying@intel.com>
The pinnacle_100_dvk board fails this test, but it was added after the
legacy DTS supprot was deprecated so we will just exclude the board
from being built on this test.
Fixes#28480
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the call to timing_init() earlier before function call
to get frequency. Some arch/SoC/board require initialization
before there is a valid frequency value. Or else the printed
value would not be useful.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add new test cases for timer to improve testing infrastructure.
Add different waiting time in existing cases. For new test cases,
restart timer and check for status of timer.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
Add a test case of preemptive thread scheduling.
The scheduler will select the highest priority and
waiting longest thread to be the current thread.
Signed-off-by: Ying ming <mingx.ying@intel.com>
Beyond the complexities of tick resolution on QEMU, this test is
invalid because POSIX nanosleep as currently implemented uses
k_busy_wait(ns / 1000) which means it's measuring the duration of
k_busy_wait(0) in ticks, which has no reasonable relation to 1 ns
regardless of tolerance.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Some test suites depend on determining at run-time
an available IRQ line which can then be used to execute
the test suite. This logic cannot used if the available
IRQ line is not targeting the current security state.
Therefore, filter out the _ns Cortex-m boards from
running these tests suites (i.e. when building with
CONFIG_TRUSTED_EXECUTION_NONSECURE=y) since we can not
contol the target state of the NVIC interrupt lines.
These tests suites test generic ARM features, that do
not depend on TrustZone-M configuration, so it is OK
that they are only executed on ARM platforms without
the NONSECURE configration set.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit reworks the .yaml files in Cortex-M
test suites, by grouping the common configuration
under the common: section. This considerably cleans
up the test suite configuration.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We try to invoke `ztest_test_pass()` from inside
a fatal exception in a child thread.
On SMP this can result in the next test case starting
on another CPU, re-using the child thread before it
has a chance to exit.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The implementations of the test cases had the wrong prototype.
The extern declarations (which were in a C file for some reason)
were correct.
I don't want to talk about the subtle code generation and stack
corruption issues that emerged from this which at one point made
me question my own sanity.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Enable by default the use of RAM buffers in the spi_nrfx_spim.c
driver for copying TX data located in flash (as SPIM peripherals
cannot transfer directly form flash). Without this patch, users can
get confused, especially when SPI transaction is used by an upper
level driver which does not check all error codes.
For size of the buffer, use the value used so far in the reel_board
default configuration and in the SPI loopback test, i.e. 8 bytes.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use the technique from portability/cmsis_rtos_v1 to compensate for
systems where times are being measured with different clocks.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Added test which validates that shell is not executing a command if
too many arguments provided.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Work around an issue where the emulator ignores host OS
signals when inside a `wfi` instruction.
This should be reverted once this has been addressed in the
AARCH64 build of QEMU in the SDK.
See https://github.com/zephyrproject-rtos/sdk-ng/issues/255
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Added test which verifies various modes of waiting for system clock
(no wait, available, stable) for different clock configurations (xtal,
rc, synth).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
tests/lib/cmsis_dsp/transform/ with config:
* libraries.cmsis_dsp.transform.cf64
96k is sufficient if tests steps are reordered
(decreasing malloc size)
Tested on nucleo_l476rg
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
tests/lib/cmsis_dsp/transform/ with config:
* libraries.cmsis_dsp.transform.cf64
Needs more than 64k RAM.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
HW Stack protection is required to successfully run the
stack overflow-related tests, so guard all these tests
inside #ifdef CONFIG_HW_STACK_PROTECTION. Otherwise this
test-suite fails for platforms that implement USERSPACE
but do not have HW_STACK_PROTECTION capability.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This adds an app which utilizes common kernel functions as a
starting point to gauge kernel footprint.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Read a volatile status into a local variable to
discard a side effect in assertion. This fixes
an issue reported by Coverity: CID: 214210.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Need to add a rise/fall delay after configuring the pin as an input,
due to a long RC time constant on LED1 circuit.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
APP_TX_RX_TIMEOUT and APP_NET_INIT_TIMEOUT were not used in any way
in the sample and test apps.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
em_starterkit_7d is not capable to generate error when access unmapped
address at kernel mode. So toggle off this part of test.
Signed-off-by: Yuguo Zou <yuguo.zou@synopsys.com>
- No longer call ztest_test_pass() out of a fatal exception,
as if this took place on some child thread, the next test
case could start on another CPU before the child has exited,
leading to issues if the child thread object is recycled
- Get rid of some unnecessary synchronization semaphores.
Use the scheduler and/or k_thread_join() instead.
- Simplify tests for read/write other threads not to spawn
a child thread and then take a fatal fault on the ztest
thread
- Add set_fault() clear_fault() as I do not enjoy typing.
Despite these variables being voliatile, a barrier is
needed to prevent re-ordering around non-volatile memory
access
- Don't call ztest_test_pass() from child thread in
test_user_mode_enter() due to possible races
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Initialize root field to NULL, so that 'test_tree_l.roo.max_depth'
will be assigned a valid value in function rb_insert().
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Use new timing API instead if local macros and functions. Add new
becnhmarks for threads and semaphore and change the output to be
parseable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove this benchmark which was relying on custom tracing points in the
code and was not scalable. Use latency_measure benchmark instead which
is more realistic and measures similar metrics in a fully reproducible
manner and on all supported architectures.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
To improve Zephyr security, I decided to create a test
test_after_syscall_cpu_scrubs_regs
I think necessary to check upon exit of a system call back
to the calling thread, the kernel scrubs CPU registers for sensitive
data.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Make it actually give the original pointer to the attribute and its
resolved handle so static attributes don't need an extra lookup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Possibly copypasta, or improvements to the test, either way
this test doesn't use that much RAM especially if memory
protection isn't active.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a generic host command handler framework that allows users to
declare new host command handlers with the HOST_COMMAND_HANDLER macro
at build time. The framework will handle incoming messages from the
host command peripheral device and forwards the incoming data to the
appropriate host command handler, which is looked up by id.
The framework will also send the response from the handler back to the
host command peripheral device. The device handles sending the data on
the physical bus.
This type of host command communication is typically done on an embedded
controller for a notebook or computer. The host would be the main
application processor (aka AP, CPU, SoC).
Signed-off-by: Jett Rink <jettrink@google.com>
tests/lib/cmsis_dsp/matrix/ with config:
* libraries.cmsis_dsp.matrix.binary_q15
128k is sufficient if tests steps are reordered,
otherwise system run out of memory.
Biggest chunk first for better malloc chunk reusability.
Tested on nucleo_f207zg
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Add the supported features section to serpente.yaml and overlay files
to the corresponding tests and samples.
Signed-off-by: Alexander Falb <fal3xx@gmail.com>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds few tests for handling scan response in ext commands:
- trying to set scan response on non-scannable instance should fail
- it should be possible to create scannable instance, set scan data,
enable and then disable set
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
add a new testcase to:
Verify some operations of rbree are running in
logarithmic time.
Verify an user defined structure contains rbtree node works.
verify "for each"style APIs work.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Add two test cases to verify the operations of accessing
head,tail,insert and remove in constant time by proving the time
complexity of the operations are O(1).
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Provide a TZ_SAFE_ENTRY_FUNC() macro for wrapping non-secure entry
functions in calls to k_sched_lock()/k_sched_unlock()
Provide a __TZ_WRAP_FUNC() macro which helps in creating a function
that "wraps" another in a preface and postface function call.
int foo(char *arg); // Implemented somewhere else.
int __attribute__((naked)) foo_wrapped(char *arg)
{
WRAP_FUNC(bar, foo, baz);
}
is equivalent to
int foo(char *arg); // Implemented somewhere else.
int foo_wrapped(char *arg)
{
bar();
int res = foo(arg);
baz();
return res;
}
This commit also adds tests for __TZ_WRAP_FUNC().
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The test was failing when run in sam_e70_xplained board.
Because the test does not use any network packet TX/RX functionality,
disable Ethernet support so that when run in a board with network
capabilities, the network interface is not created.
Fixes#28000
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
lock_runtime is a stack variable whose contents could be completely
garbage, but only the 'locked' member was zeroed. zero the whole
thing to prevent spurious "recursive spinlock" errors from occasionally
popping up as the validation framework gets confused from garbage
data in the other memebers of this data structure.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It should be nrfx_power_clock_irq_handler, not nrfx_clock_irq_handler.
The latter is only present as a function if both nrfx CLOCK and POWER
drivers are used and it is then called from the actual IRQ handler,
which is always named nrfx_power_clock_irq_handler (also when only
the nrfx CLOCK driver is used as in case of this test).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a build only test to validate correct compilation of the uart_rtt
driver. No harness that connects to RTT is defined, and therefore the
test can't be run by CI.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add Kconfig with the following options:
- DMA_LOOP_TRANSFER_DRV_NAME to set the DMA device name, because
some SOCs do not allow memory to memory DMA on all DMA devices
- DMA_LOOP_TRANSFER_CHANNEL_NR some SOCs start counting the DMA
channels at 1 instead of 0.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
FS_TYPE_END is no longer used as there is no hard-coded limit on the
number of file systems. Replace with the limit used when only in-tree
file systems are enabled.
The test for unsupported file systems is no longer valid. Instead
verify that attempting to register a file system when there is no room
for it fails as expected.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Use platform_allow instead of platform_exclude, as the test depends
on specific boards. A new board with DAC support should not be added
to this test automatically.
Signed-off-by: Martin Jäger <martin@libre.solar>
Memory mapping, for now, will be a private kernel API
and is not intended to be application-facing at this time.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We no longer plan to support a split address space with
the kernel in high memory and per-process address spaces.
Because of this, we can simplify some things. System RAM
is now always identity mapped at boot.
We no longer require any virtual-to-physical translation
for page tables, and can remove the dual-mapping logic
from the page table generation script since we won't need
to transition the instruction point off of physical
addresses.
CONFIG_KERNEL_VM_BASE and CONFIG_KERNEL_VM_LIMIT
have been removed. The kernel's address space always
starts at CONFIG_SRAM_BASE_ADDRESS, of a fixed size
specified by CONFIG_KERNEL_VM_SIZE.
Driver MMIOs and other uses of k_mem_map() are still
virtually mapped, and the later introduction of demand
paging will result in only a subset of system RAM being
a fixed identity mapping instead of all of it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Flash memory can be write but there is no way to check flash integrity.
Add flash_img_check method that verify flash integrity. This is useful
to avoid firmware reboot and test. Another use is ensure that firmware
upgrade routines from internet server to flash slot are performing
properly. This uses flash_area_check_int_sha256 method to check a
SHA-256 hash. On sucess match, zero is returned, otherwise a negative
errno value.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Add SHA-256 flash integrity method. It reads flash data from a
device giving an offset creating a SHA-256 hash to be compared
with a reference. On sucess match, zero is returned, otherwise
a negative errno value.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
If the recvfrom() in the test returns EAGAIN, try again in order
to make sure that we have really received the data.
Fixes#27963
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to be possible to debug usermode threads need to be able
issue breakpoint and debug exceptions. To do this it is necessary to
set DPL bits to, at least, the same CPL level.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Remove special handling of the ARM Cortex-M1 DesignStart FPGA reference
design running on the Digilent Arty after CONFIG_NUM_IRQS was reduced
from 8 to 7.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Extend check to determine a usable ARM NVIC IRQ line to verify that the
IRQ line is not always pending.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
We add a simple test-case for verifying the behavior of the
Cortex-M IRQ target state management. We add an additional
test only for TrustZone-enabled Cortex-M targets running
in Secure mode. We explicitly exclude ARMv8-M platforms that
enable Non-Secure FW build by default from running the test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
At present this test uses an EEPROM emulator. Reuse the same test to
also use the real Atmel AT2x driver and an AT24 emulator, via the I2C
emulation controller.
EEPROM reads and writes for eeprom1 go through the AT2x driver, which
converts them to I2C transactions, which are passed through to the
AT24 emulator for processing. This approach makes more use of 'real'
code, in this case the Atmel AT2x driver.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Simon Glass <sjg@chromium.org>
In NPCX7M6FB, it uses some the IRQs at the end of the vector table,
for example, the irq 60 and 61 used for Multi-Input Wake-Up Unit (MIWU)
device by default, and conflicts with isr used for testing. Moving IRQs
for this test suite to solve the issue.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Add gpio support for Nuvoton NPCX series. This CL includes:
1. Add GPIO device tree declarations.
2. Introduce wui_maps property in yaml file to present relationship
between Wake-Up
Input (WUI) and 8 IOs belong to the device.
3. Zephyr GPIO api implementation.
4. GPIO callback functions implementation with MIWU api functions.
5. Overlay file for gpio basic tests
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Unit tests may include C++ code, so ensure the compiler flags are
consistent to avoid link errors.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The value of adv_type shall be 0x07 for extended advertising, it will
be converted to 0x05 inside ll_adv_params_set after some checks.
This did not cause any issues with tests since input parameters in
already implemented test cases do not test any code that was skipped
by invalid parameter, however obvious one side-effect is that phy_p
would be always set to 1M regardless of input parameter so any test
case using Coded on primary would fail.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Added tests to update AD data as fast as possible. This test
shall exercise any race condition assert checks in the
Zephyr BLE controller implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Increased sim_length value to 60 seconds so as to meet the
current length of 13.56 seconds and any future test timing
increases in the near future.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update bsim test to test Periodic Advertising Enable and
Disable alongwith Extended Advertising Enable/Disable.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
After the fallthrough comments have been replaced (see commit
741ad17a37807a5396e73c10cf3e5fb425bc87bb) with a macro expanding
to the corresponding attribute, those hints became statements,
and if one happens to occur before any switch case, a warning
reporting it as an unreachable statement is generated.
Prevent the above from happening for function ll_rx_dequeue() in
ull.c by enabling an option that will make some switch case to
appear before this problematic statement.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Update the driver implementation to use nrfx_clock and nrfx_power
drivers. Update also revisions of the hal_nordic and nrf_hw_models
modules, so that it is actually possible to use those drivers.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
To debug hard-to-reproduce faults/panics, it's helpful to get the full
register state at the time a fault occurred. This enables recovering
full backtraces and the state of local variables at the time of a
crash.
This PR introduces a new Kconfig option, CONFIG_EXTRA_EXCEPTION_INFO,
to facilitate this use case. The option enables the capturing of the
callee-saved register state (r4-r11 & exc_return) during a fault. The
info is forwarded to `k_sys_fatal_error_handler` in the z_arch_esf_t
parameter. From there, the data can be saved for post-mortem analysis.
To test the functionality a new unit test was added to
tests/arch/arm_interrupt which verifies the register contents passed
in the argument match the state leading up to a crash.
Signed-off-by: Chris Coleman <chris@memfault.com>
Trims the default memory configuration for the BBC Microbit in mesh
samples to ensure that it fits.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This patch introduces some tests for the LED drivers. The following
functions of the LED API are tested:
- led_get_info
- led_on
- led_off
- led_set_color
- led_set_brightness
Note that the led-controller-0 alias must be defined in the DTS of the
board used to run this tests.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Some ARMv8-M platforms may come with only 8 (instead of 16)
MPU regions. In these platforms, by design, a memory domain
may contain up to 2 application memory partitions, when we
build with MPU_GAP_FILLING support. To be able to test this
valid configuration we slightly modify the test code in the
mem_protect suite, and add-remove the second partition (with
index-1) instead of the third (index-2).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We need to exclude the .gap_filling test from running on
ARMv8-M platforms with 8 MPU regions available, since the
userspace test defines and uses a memory domain whose number
of partitions exceed the maximum number of permitted partitions
in ARMv8-m SoCs with MPU_GAP_FILLING=y.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding the first list item in the same line as @details, creates a list
with a single item inside a paragraph, and another list with the
remaining items. What is wanted here is to have a single list with all
items, so the first item needs to be in a new line.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
The spi_flash_w25qxxdv driver has been superseded by the generic
spi_nor driver for over a year. The only non-refactoring change to
the W25Q driver in the last 18 months was done to support a backport
to 1.14.
All devices supported by spi_flash_w25qxxdv driver are expected to be
supported by the spi_nor driver, using the standard `jedec,spi-nor`
devicetree compatible. No in-tree devicetree files make use of this
driver.
Remove the confusion about which driver to select by removing the
unmaintained redundant driver.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add more tests to verify that we discard malformed packets.
In order to simplify the testing, separate message validation to
dns_validate_msg() function in resolve.c. Allow that function to
be called from unit test. This way we can construct invalid DNS
messages in unit test and verify that they are discarded when
needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tests need to be adjusted to do the correct checks now that reference
count is incremented in z_reserve_fd() instead of z_finalize_fd().
test_z_fd_multiple_access in particular has been simplified to
reserving an fd in one thread and freeing it in the other.
Signed-off-by: Vincent Wan <vwan@ti.com>
Add some tests for testing AF_PACKET and SOCK_DGRAM type
sockets. These are sockets where Ethernet header is automatically
added, caller just needs to provide upper stack header.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We don't have use-cases and it introduces complexities with
allocating page tables on MMU systems.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Align all Kconfig option names with LVGL names. The followed rule:
LV_(.*) -> CONFIG_LVGL_(.*).
Also replaced LVGL boolean configuration entries using if/else/endif
with direct IS_ENABLED macro.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add support for running the SPI loopback driver test on the ARM
Cortex-M1 DesignStart FPGA reference design.
Since Xilinx AXI Quad SPI IP only supports loopback mode when configured
for single line SPI width, we utilise the (normally disabled) single SPI
instance going to the optional V2C DAPLINK shield SD card slot for
testing purposes.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Several of the values passed to the conversion failure diagnostic are
unsigned and/or 32-bit values, while all format specifiers are for
signed 64-bit integers. Make the specifiers consistent with the
argument.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
For the moment, we validate the flags on all RAM pages,
ensure that NULL is never mapped, and show that dumping
page tables doesn't crash.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Ancient 2-level IA32 page tables don't support "eXecute Disable".
Skip the test scenarios for them.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test covers private interfaces that don't exist any more.
This will be replaced by tests of arch_mem_map() that are not
x86-specific.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test is against infrastructure that no longer exists.
It will be replaced by generic tests for the mapping APIs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is an extension to the existing FOR_EACH family of macros that
has a couple of twists that make it more useful in certain contexts,
as explained in the docstring.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added additonal checks in net_ipv6_input to ensure that multicasts
are only passed to the upper layer if the originating interface
actually joined the destination multicast group.
Signed-off-by: Philip Serbin <philip.serbin@lemonbeat.com>
update counter_basic_api to support kinetis PIT
update counter to support multi coutner driver
select PERIOD_TO_US by device name at runtime
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
MEC1501 SoC has 256KB of SRAM, but it is split into 224/32KB
for code and data, as each partition is optimized for
the access pattern. There the DTS only specifies 32KB as
data ram. The tinycrypt_hmac_prng test requires 40KB for
ztest stack. This obviously won't fit so exclude the boards
based on MEC1501 from the test.
Fixes#27572
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
One driver (mchp_xec) appears to have problems with setting the output
value before setting the direction, which can be caught if the order
of checks in the port setup function are reversed. Reconfigure the
output to a non-output state before the second test to see if that
catches the problem.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
net: route: Add prefix-based ipv6 multicast forwarding
This adds/reenables the feature of multicast routing/forwarding.
The forwarding decision is based on the added multicast routes
and the new network interface flag:
NET_IF_FORWARD_MULTICASTS.
Signed-off-by: Jan Georgi <jan.georgi@lemonbeat.com>
The NVS tests have been disabled here with commit
tests: nvs: Disable running the 0x00 test suite
(22be0d8fd5)
due to problems with flash_simulator.
With introduction of below fixes:
drivers/flash/flash_simulator: Fix flash_sim_write
(bec0c7f279)
drivers/flash/fash_simulator: Fix initialization for non-posix
(849a5432df)
the tests can be enabled back.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Disable shell print functions if the shell is not initialized.
Update tests accordingly.
Fixes#27161
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Signed-off-by: Steven Slupsky <sslupsky@gmail.com>
Add support for the Cortex-M1 ARM DesignStart FPGA reference design
running on the Digilent Arty development board.
This board uses IRQ 7 (the last IRQ) as a level-detect non-interrupt
signal to determine whether the V2C-DAPLINK shield is installed. This
IRQ line is always pending when the shield is not installed. Use IRQ 6
instead.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The Wait For Interrupt (WFI) instruction ARM Cortex-M1 CPU does not
operate as a powersave instruction. It is always executed as a NOP.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The Data Tightly Coupled Memory (DTCM) of the Cortex-M1 present in the
Cortex-M1 ARM DesignStart FPGA implementation is No-Execute (NX), so
__ramfunc linked in the DTCM will cause a hard fault when executed.
Use the Xilinx Block RAM (bram0) present in the reference design for
demonstrating __ramfunc instead.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Extend check to determine a usable ARM NVIC IRQ line to verify that the
IRQ line is not always pending.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Extend check to determine a usable ARM NVIC IRQ line to verify that the
IRQ line is not always pending.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Extend check to determine a usable ARM NVIC IRQ line to verify that the
IRQ line is not always pending.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Only one LOG_MODULE_REGISTER() is allowed in the files that are
linked together. The other files must use LOG_MODULE_DECLARE()
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The on-off manager infrastructure is designed to robust asynchronous
transition between binary states where multiple clients may be
initiating a transition from any context. The actual transition is
performed using a manager that tracks the current state and pending
operations. Requests are initiated by passing a reference to an
onoff_client object that holds client state including the notification
mechanism.
This API may be used in subsystems where the transitions for a
particular driver are always synchronous and isr-ok, e.g. setting a
SoC-controlled GPIO. In this situation the full on-off manager
infrastructure is wasteful. All we need is a record of the service
state: off, active count, or error.
Add a data structure and an API that can be used to replace the onoff
manager functionality in a situation where all transitions are isr-ok
and synchronous while retaining compatible behavior from the client
perspective.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
There is nothing wrong with instance numbers and they are
recommended for use whenever possible, but this is an API
design problem because it's not always possible to get nodes
by instance number; in some cases, drivers need to get node
identifiers from node labels, for example.
Change these APIs (which are not yet in any Zephyr release)
to take node IDs instead of instance IDs.
Fixes: #26984
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add some testcases to:
Verify an user defined structure contains dlist node works,
Verify dlist "for each" style APIs work.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Make the expected data buffers immutable to ensure that the test isn't
modifying them.
Improve clarity by using defines for the two devicetree nodes rather
than repeating the DT_INST() retrieval.
Clean up the naming and diagnostics to more clearly associate the
device label, I2C bus, and I2C address with either EEPROM instance 0
or 1. Replace the base 1 numbering in some diagnostics.
Document why a device nominally on one bus is being accessed from
another bus. Return error values from helper functions rather than
invoking ztest failure code so the calling context can provide a
better description of what went wrong.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The test currently identifies devices by instance number, which is not
guaranteed to be constant across builds. Add node labels so the test
can be updated to use a more permanent node identifier.
Also remove insensitive (and misleading) terminology in the node
labels.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This device isn't an actual hardware driver: it's a virtual EEPROM
that stores data in an instance-specific RAM buffer, with the data
exposed on an I2C bus as a I2C follower (slave) device that can be
controlled by another device acting as a leader (master) on that same
bus.
As such it's a reasonable example of how to write an I2C follower
driver, but it's not clear that it has a real use in applications. A
Zephyr application that needs to emulate an EEPROM in a real-world
system would be unlikely to provide its data from a RAM buffer.
The sole in-tree reference is in the i2c_slave_api test, so move the
driver implementation into that test.
The Kconfig and hierarchy are being left in place until it is more
clear how this functionality should be selectable within Zephyr. The
I2C_SLAVE symbol has been converted from menuconfig to config to
eliminate a Kconfig style diagnostic.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Move all the tests into an include file that is included once from the
main C-compiled module, and again from a linked in C++-compiled
module. The C compile invokes both test suites.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Put message to a full queue or get message from an empty queue with
different timeout: K_NO_WAIT, a period of time, K_FOREVER.
Signed-off-by: Meng xianglin <xianglinx.meng@intel.com>
Added support for syncing to periodic advetisements.
The API and usage is heavily inspired by the extended advertisement
and connection APIs.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added API to set periodic adv parameters, periodic adv data
and to enable/disable periodic advertisement.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Add tests that will make sure that refcounting works as expected.
Also fixed two tests that were using the object values before
the fdtable contained proper values. After reserving a fd by
z_reserve_fd(), we can only call z_finalize_fd() or z_free_fd(),
and only after those calls can fetch obj and vtable values.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OT_RADIO_CAPS_SLEEP_TO_TX was added as a radio capability
for ieee802154 radio. Waiting on RX state before transmission
is alternative condition to OT_RADIO_CAPS_SLEEP_TO_TX support
as it was a result of OpenThread architecture and is actually
not needed in the Zephyr. Such change lets to start transmission
faster and lower SED device power consumption in active state
about 30%.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Add a test that verifies basic ARCH-level functionality
when building Zephyr without support for multithreading.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Zephyr platform does not support MAC retransmissions on its own,
so OT_RADIO_CAPS_TRANSMIT_RETRIES capability was removed.
It should not be enabled basing on IEEE802154_HW_CSMA support,
as these are quite seperate features. Current implementation
assumes that platform performs retransmissions on its own,
what is not provided and leads to lack of MAC retransmissions.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
TCP2 uses slightly more network packets and connections in the
socket poll test, so increase the values for the test.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When thread is initialized and running z_object_validate
will return 0 for thread object and its thread stack object.
When thread exit, z_object_validate
will return -1 for thread object and its thread stack object.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Instead of replacing of copyright year with the new one,
necessary to add new to the existing one
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Instead of replacing of copyright year with the new one,
necessary to add new to the existing one
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Updated current tests tags to make them more informative.
1. test_mslab updated Doxygen tag
2. test_create_alt_thread updated Doxygen tag
3. test_sys_heap_mem_pool_assign updated Doxygen tag
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Modify current semaphore tests.
I checked the semaphore tests, and find out many gaps.
Overhaul semaphore tests:
1. Modify some tests
2.Doxygen tags update
3. Update text in zassert messages
4. Remove misprints
5. Test cases names change. Some test cases had a semaphore name in
their name, for example simple_sem, I removed it from the test
case names. Also some test cases used sema, some used word sem.
I decided to make standard short word for a semaphore sem
Detailed explanation of the changes:
-test_k_sema_init() -updated name to test_sem_init, updated doxygen
tag, updated zassert text
-test_sem_take_timeout() -updated doxygen tag, added zassert to check
that reset was correct, updated zassert text
-test_sem_take_timeout_fails() -updated doxygen tag, added zassert
to check that reset was correct, updated zassert text
-test_sem_take_timeout_forever() -updated doxygen tag, added zassert
to check that reset was correct, updated zassert text
-test_sem_take_multiple() -updated doxygen tag, modified that test,
added one more thread sem_tid_4, with high priority and added one
more semaphore high_prio_long_sem
-test_simple_sem_from_isr() -updated name to test_sem_give_from_isr,
updated doxygen tag, zassert text fix
-test_simple_sem_from_task() -updated name
to test_sem_give_from_thread, updated doxygen tag, zassert text fix
Tested on qemu_x86, qemu_x86_64, reel_board, and iotdk
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The spi tests are not running because test_spi at app.overlay doesn't
have cs-gpios entry. Add cs-gpios definition with one phandle for
every device defined at spi.dtsi.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The test_spi_enc28j60 have a duplicated address at spi.dtsii file.
Add proper value for enc28j60 instance and fix address the sequency.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
close in error handling attempts to close incorrect file descriptor.
Fixes#27327
Coverity-CID: 211585
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The previous test had two defects. First, the shell command was called
before the backend was initialized.
Second, the test compared the string from shell's backend buffer with
the reference string using strncmp function. This test result was very
susceptible to the time when it was performed because of data contained
in the buffer. Apart from expected string there was data like escape
codes needed to control the terminal.
To fix it, function strncmp was replaced by strstr, which
searches for the reference strings regardless of the characters
controlling the terminal.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Add k_delayed_work_pending similar to k_work_pending to check if the
delayed work item has been submitted but not yet completed.
This would compliment the API since using k_work_pending or
k_delayed_work_remaining_get is not enough to check this condition.
This is because the timeout could have run out, but the timeout handler
not yet processed and put the work into the workqueue.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a variety of property and specifier cell accessors that fall back
on a default value supplied by the caller if the devicetree does not
contain the requested data.
This is useful for avoiding use of COND_CODE_1() and similarly tricky
macros in applications and drivers.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Move some common macros shared between different unit test functions
up to the top of the file to make them easier to spot and keep them a
bit tidier.
This cleanup excludes macros that are only used for specific purposes
in a single function.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The definition of the help command has been changed
so that it does not accept the arguments.
Thanks to this it cannot be marked by the "select" command.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
There are predictable relationships between the actual size
of a stack object, the return value of K_*_STACK_SIZEOF() macros,
and the original size passed in when the stack was declared.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These stacks are appropriate for threads that run purely in
supervisor mode, and also as stacks for interrupt and exception
handling.
Two new arch defines are introduced:
- ARCH_KERNEL_STACK_GUARD_SIZE
- ARCH_KERNEL_STACK_OBJ_ALIGN
New public declaration macros:
- K_KERNEL_STACK_RESERVED
- K_KERNEL_STACK_EXTERN
- K_KERNEL_STACK_DEFINE
- K_KERNEL_STACK_ARRAY_DEFINE
- K_KERNEL_STACK_MEMBER
- K_KERNEL_STACK_SIZEOF
If user mode is not enabled, K_KERNEL_STACK_* and K_THREAD_STACK_*
are equivalent.
Separately generated privilege elevation stacks are now declared
like kernel stacks, removing the need for K_PRIVILEGE_STACK_ALIGN.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently for informational purposes, although we do check that
the carveout is smaller than the stack_size.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
thread->stack_info is now much more well maintained. Make these
tests that validate that user mode has no access just outside
the bounds of it, instead of the entire object.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Check that the base of every stack object is properly
defined. This can get messed up if K_THREAD_STACK_ARRAY_DEFINE
isn't specified properly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The core kernel computes the initial stack pointer
for a thread, properly aligning it and subtracting out
any random offsets or thread-local storage areas.
arch_new_thread() no longer needs to make any calculations,
an initial stack frame may be placed at the bounds of
the new 'stack_ptr' parameter passed in. This parameter
replaces 'stack_size'.
thread->stack_info is now set before arch_new_thread()
is invoked, z_new_thread_init() has been removed.
The values populated may need to be adjusted on arches
which carve-out MPU guard space from the actual stack
buffer.
thread->stack_info now has a new member 'delta' which
indicates any offset applied for TLS or random offset.
It's used so the calculations don't need to be repeated
if the thread later drops to user mode.
CONFIG_INIT_STACKS logic is now performed inside
z_setup_new_thread(), before arch_new_thread() is called.
thread->stack_info is now defined as the canonical
user-accessible area within the stack object, including
random offsets and TLS. It will never include any
carved-out memory for MPU guards and must be updated at
runtime if guards are removed.
Available stack space is now optimized. Some arches may
need to significantly round up the buffer size to account
for page-level granularity or MPU power-of-two requirements.
This space is now accounted for and used by virtue of
the Z_THREAD_STACK_SIZE_ADJUST() call in z_setup_new_thread.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
() The thread created to be used for timing measurement does not
need to run, so use K_FOREVER instead of K_MSEC().
() Thread cancel is actually using k_thread_abort() so re-word it
correctly to indicate it is aborting a non-running thread.
() The other k_thread_abort() is used on _current so re-word
the item.
Relates to #25458
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add new tests that will utilize open mode flags with the open
function.
A few test functions which assumed O_CREAT behavior are updated
to specify it explicitly.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The addition of support for open flags, within fs_open, requires
addition of new test cases.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The addition of support for open flags, within fs_open, requires
addition of new test cases to FAT FS back-end tests.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Common procedure, to use with fs back-ends, have been added for testing
various fs_open flags combinations.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The fs_open has been extended with support for open flags.
Currently supported flags are:
FS_O_READ -- open for read
FS_O_WRITE -- open for write
FS_O_CREATE -- create file if it does not exist
FS_O_APPEND -- move to the end of file before each write
The FAT FS and LittleFS front-ends within the Zephyr has also been
modified to utilize the flags.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The tests were failing when run on those boards that had
physical Ethernet support. In that case there were three Ethernet
interfaces, two simulated ones for testing, and the third one
was provided by the board. This extra Ethernet interface caused
the test to fail as the test was sending data to wrong interface.
Fixes#27238Fixes#26568
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We now have a variant x86 build target that only is run
for tests tagged with "xip", which is this one.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It was already using uart_irq_callback_user_data_set below, now it also
uses uart_irq_callback_user_data_t as callback type, so let's normalize
the callbacks.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The device pointer is now provided to the callback, there is no need to
call uart_callback_set() with the device being set a user data.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Not all watchdog devices support a warning callback before reset. If
the driver refuses to accept that configuration record the test as
having passed.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Modify the tests so that they verify that only allowed thread
is able to modify network interface data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1. Found out that thread tests doesn't test next ideas of requirements,
which I think necessary to be tested and verified:
-the kernel need to prevent user threads creating new threads from
using thread or thread stack objects which are in an initialized state
-Upon thread exit, the kernel need to mark the exiting thread
and thread stack objects as uninitialized
Add new tests to test requirements above, that way we can cover more
features to be tested:
- test_new_user_thread_with_in_use_stack_obj()
- test_mark_thread_exit_uninitialized()
2. Modified test test_create_new_thread_from_user() to verify that
kernel provides new user threads access to their own thread object.
3. Also I added detailed Doxygen tags for each new test and existing
modified test.
4. Added Doxygen tag to the existing test test_stack_buffer, it
covers requirement:
-The kernel need to provide all threads read and write access to their
own stack memory buffer.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Inside function futex_wake() result of k_futex_wait() is not checked.
Coverity-CID: 211508
Fixes: #27149
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Now that the patches have landed, enable more of the peripherals on
the board.
In particular:
* Enable PWM on the LED
* Enable the SPI, USB, and DMA
* Enable the bootloader support
* Add to the PWM and SPI tests
* Call these out in supported.yaml
Signed-off-by: Michael Hope <mlhx@google.com>
An old doxygen biolerplate was being copied all over the tests. The
defined groups are not being used anywhere and it does not follow how we
document tests for example in the kernel and other places.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update LVGL to version 7.0.2. Notable changes in v7 include:
- New drawing system (note that it uses much more ROM than previous
versions)
- New style system
- Some objects have been renamed (current changes do not align yet
Zephyr Kconfig settings with LVGL)
- New fonts with more sizes (e.g. Montserrat, replacing Roboto)
- Theme changes (most have been removed, default is now Material)
Note that constant defaults have been aligned with LVGL.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Adds native_posix hw counter model and the counter driver.
Functionality is needed by software which is tested
on native_posix and has dependency on counter.
Hardware model was developed similarly to HW timer model.
The counter driver wraps HW counter functions and exposes
basic functionalities: starting, stopping, setting and cancelling
single channel alarms.
Code was tested against: tests/drivers/counter/counter_basic_api.
Signed-off-by: Filip Zajdel <filip.zajdel@nordicsemi.no>
Add a test suite to validate the Software Vector Relaying
feature for Cortex-M architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Extend the gen_isr_table test suite to build and run
on Cortex-M baseline platforms. Add a few platforms
in the whitelist so the test builds and runs for some
common Baseline Cortex-M insluding the QEMU.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding tags for ARC-variant of the test.
Rename test string to comply with ARM-variant name.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The Olimex STM32-h103 is a development board based on the STM32F103RB,
very similar to the stm32_mini, which was used as a reference for the
pinmux configuration.
Signed-off-by: Josep Puigdemont <josep.puigdemont@gmail.com>
Add new standalone futex test that verifies next requirements:
-Futex can be placed in user memory using ZTEST_BMEM
-User thread can write to futex value
-User threads can make wait/wake syscalls on it
Added detailed Doxygen tag with information about the test
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
1.Add some comments to describe functions performance
2.add a new testcase to implement push can be waited
when there are no items available.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
avoid to use the flash address as dma source,
to avoid flash cache issue
this is fix to issue #26812
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Nordic platforms exposes API for controlling HF clock along
onoff API. This API is dedicated to be used by the bluetooth
controller and must not be used elsewhere.
Test suite is validating stability of HF clock control using
onoff API and specialized API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Updated nrf clock control driver to use onoff service for managing
multiple users.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When there were multiple writes to eventfd, then poll() + read() should
start behaving as just initialized. Test that by verifying poll() will
timeout first and later be notified properly when eventfd is written
once again from the other thread.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Since the peer isn't replying on SYN resend, update the
test to check for failed connect.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Since the connect is now blocking, update the timeout values
for the tests to pass.
In case of resend test, set the timeout to 1000ms to account
for the retransmission.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Test include non-aligned read in nrf_qspi_nor flash and
SoC flash memory to buffer with variable size.
It checks all possible variants of alignment and size.
Signed-off-by: Mateusz Syc <Mateusz.Syc@nordicsemi.no>
Added a feature that allows an application to request
automatic discovery of the CCCD handle when subscriping
to a characteristic. In order to preserver RAM, the application
is expected to provide the discovery parameters, and it's up
to the application whether or not it wants to reuse the
discovery parameters or use one for each characteristic.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Add support for wsen-itds 3-axis accel sensor, provides acceleration,
temperature data reading and supports configuring of output data rate,
operating mode and scale.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Exercise the public macros as well as device_map().
This test has a whitelist for whatever reason; add
mps2_an385 so that the !DEVICE_MMIO_IS_IN_RAM stuff
is tested.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Disable test with long AD data being set, as 251 byte
Advertising PDU is not yet supported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
1. Add code change to the test_permission_inheritance() to let it
test that child thread can't access parent thread object. Now that test
tests one more related to it feature.
2. Add new Doxygen tags with informative descriptions about the kernel
objects tests. That will make reading and understanding kernel object
tests code easier.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Instead of replacing of copyright year with the new one,
necessary to add new to the existing one
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
To improve Zephyr tests, I think that it will necessary to have test,
that verifies a child thread inherits resource pool assignment
of their parent.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Add new semaphore tests, to test important features like:
-count limit
-semaphore define at compile time
-mutual exclusion
I decided to add new test cases that can improve Zephyr
semaphore testing infrastructure.
For each new test added informative Doxygen description.
New test cases test next important requirements:
1. test_k_sem_correct_count_limit()
That test verifies that semaphore can be taken correctly by a thread,
and taking of semaphore decrements its count as expected.
2. test_k_sem_define()
Explicit ans standalone test to test semaphore can be defined
compile time.
3. test_sem_queue_mutual_exclusion
Test that our system can provide a traditional counting
semaphore abstraction for mutual exclusion.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
After commit 8a6b02b5bf ("lib/os/heap: some code simplification in
sys_heap_aligned_alloc()") it is no longer required to have a "big"
heap for aligned allocations to work on 32-bit targets. While the
natural alignment for returned memory has an offset of 4 within a chunk
unit due to the smaller header size, returning to a chunkid from a
memory pointer with an offset of 8 will fall back onto the proper chunk
number once the 4 is substracted and then divided by 8.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
One fundamental validation criteria is to never have consecutive free
chunks. If that ever happens we failed to merge them. That means a free
chunk must always be surrounded by used chunks.
It is a pain to extend valid_chunk() with new rules as it is.
So a VALIDATE() macro is introduced to make things easier to work with.
It also allows for isolating each test, possibly making VALIDATE() into
__ASSERT() to determine exactly which test is tripping when debugging.
Finally, because of that new validation rule, sys_heap_validate() must
be modified so not to use valid_chunk() while it is flipping all the
"used" flags. So let's run valid_chunk() up front before alterating
chunk headers.
Now sys_heap_validate() has become justifiably more expensive and a few
emulated targets are about to bust the tests/lib/heap test timeout. So
bump the timeout as well.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Due to issue #20589 DEBUG_OPTIMIZATIONS were enabled for the rv32m1 vega
ri5cy vega config. This is now resolved after making sure the spi tx
buffer is always initialized and the rv32m1 ri5cy core stack properly
initialized, so this workaround can be removed.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
The mcux pwm drivers use period cycles as a divisor to calculate the pwm
frequency in hertz. This operation can underflow easily with large
values of period cycles relative to the pwm clock source, causing the
driver to return an error code and the pwm_api test to fail.
Updates the test to use the smaller set of period and pulse cycles on
kw41z-based boards, fixing the test for the frdm_kw41z board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
One of the interrupts used by the gen_isr_table test conflicts with a
gpio interrupt on the lpc54114 soc, so disable gpio for this test on the
corresponding board. We do this for only the m4 core because the test is
not supported on the m0 core.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add support to STM IIS2DH the ultra-low-power highperformance
three-axis linear accelerometer.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The sys_kernel tests have some loops that work only with 1 CPU
being active. So limits the number of CPUs to 1 even when SMP
is enabled. This also allows qemu_x86_64 to run, so remove it
from the exclude list.
Fixes#26627
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
During inspection of the workqueue tests, I find out testing gaps.
Decided to add new test cases that can improve Zephyr OS testing
quality.
Added new test cases:
1. test_work_item_supplied_with_func
In docs described that work item supplied with a handler function,
prove that it works.
2. test_process_work_items_fifo
Test that system process work items in first-in, first-out manner.
3. test_sched_delayed_work_item
Verify that delayed work item processed after specific period of time
stated by user.
4. test_workqueue_max_number
Test the limit of number of workqueues created
5. test_cancel_processed_work_item Created test to increase branch
coverage.
Modified existing test cases:
1. test_work_submit_handler updated Doxygen tag, added more detailed
description"
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
() This is simply to clean up the code for cycles and timing
calculations as there are quite a bit of unnecessary AND
operations.
() This also moves the cycle calculation closer to the print
statement as a few calculations were done between grabbing
counter values.
() PRINT_STATS() now takes only two parameters as the third
one was always calling CYCLES_TO_NS(2nd) anyway.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In nRF9160 and application core in nRF5340, not all interrupts with
highest numbers are implemented. Thus, limit the number of interrupts
reported to the test, so that it does not try to use some unavailable
ones.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
With native_posix, a flash.bin file is created when running the tests.
If the tests are re-run, they fail since the flash is no-longer erased.
Before running the tests, erase the flash so that the 'read' test can
work regardless of the previous state.
Fixes: 25171
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a simple test for this command to check that the output is as
expected.
This requires a larger output buffer in shell_dummy, so update that
too.
Signed-off-by: Simon Glass <sjg@chromium.org>
This test was written to assume that the only IPI handled would be the
one generated by the test, but the scheduler also generates an IPI any
time a thread becomes runnable, and there's no way to lock that out in
an SMP system where the other CPU is going to be doing its own thing
(we can't use "1cpu" because that locks interrupts on the other CPU
and obviously this is a test of an interrupt).
Change the logic to detect that "at least one IPI was received", which
is fine for coverage. Really a better place for a test like this
would have been tests/kernel/mp, which is a test of the lower level
APIs and runs the other CPU deterministically (i.e. not under the
control of the Zephyr scheduler).
Also some misc fixes:
* Don't busy wait at the start, that's needless.
* Sleep instead of busywaiting after sending the IPI, spinning isn't
needed here and acts to increase CI load needlessly.
* Declare the cross thread signal variable volatile for correctness
(though this error seems to have been benign in practice).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
nsim is slow, if the MEMSZ is too targe, the test will
run a long time and make sanitycheck timeout.
There are two possible fixes to pass the sanitycheck test
* filter out nsim, not to block the sanitcheck test
* use a small MEMSZ for nsim to reduce the execution time.
Considering there are potential improvements for nsim (because
some qemu targets can pass), we use the 1st fix to pass the
sanitycheck temporarily.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This test fails for newlib configuration,
for nucleo_f030r8 which has only 8K of RAM.
But each step of the test is successfull when executed solely
or with smaller buffer size.
Note: test is working on nucleo_f091rc which has larger RAM (32K)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Fix host RX thread being deadlocked. The deadlock occurs because the
RX thread is stuck waiting in conn_tx_alloc with K_FOREVER but if the
connection is disconnected only the RX thread can unblock it in the
handling of the disconnect event.
This commit fixes this deadlock by splitting the processing of the
disconnected event into two parts.
The part needed to unblock the RX is to release resources held by
unack'ed TX packets and mark the connection state as not connected
anymore.
The RX thread waiting for free_tx fifo and the TX thread waiting for
the bt_dev.le.pkts semaphore will both check the connected state after
having acquired them and will abort if disconnected.
The rest of the processing will be handled at normal RX thread
priority like normal.
Move the bt_recv_prio handling to the Bluetooth host when the host
has defined its own RX thread (CONFIG_BT_RECV_IS_RX_THREAD=n).
If the HCI driver has the RX thread (CONFIG_BT_RECV_IS_RX_THREAD=y),
then the responsibility to call bt_recv and bt_recv_prio correctly
falls to the HCI driver.
The helper function bt_hci_evt_is_prio() is replaced with
bt_hci_evt_get_flags() so that the HCI driver can do this correctly.
This decision to replace was made so that existing HCI drivers
maintained out-of-tree will fail at compile time with the new system.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Bluetooth: host: Move bt_recv_prio to host when RX thread is defined
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
GICv3 is now support for SGI generation and test case is updated
to use GICv3 apis. bcm958402m2_a72 can be enabled now.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
This commit is a cleanup in two test samples.
In both samples, the following line of code were found:
set(DTS_ROOTS ${CMAKE_CURRENT_LIST_DIR})
Firstly, it is not needed to set `DTS_ROOT` in samples, as the sample
folder is always added to `DTS_ROOT`.
Secondly, the variable is named `DTS_ROOT`, but the samples used a
misspelled version `DTS_ROOTS`, which means that variable has never
had any effect.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Enable internal DAC to ADC loopback on the NXP TWR-KE18F
board.
Increase the ADC sample time to 5 microseconds since there is no
buffer between the DAC and ADC.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The conversion from cycles to nanoseconds was using the incorrect
macro which resulted in microseconds instead. So fix it by
using the correct macro.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add one another test case for testing both arch_curr_cpu() and
arch_sched_ipi() architecture layer interface.
Signed-off-by: Enjia Mai <enjiax.mai@intel.com>
1. Doxygen tags updates of the existing tests.
2. Fixed use of API K_MSEC in test_syscall_torture
3. Removed misprints
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
GICC_BPR has minimum legal values in secure and non-secure states.
'3' is the minimum BPR value leading to group and sub-group priority
as 'gggg.ssss'. In order to make an IRQ preemptible they need to
be in different priority group.
Hence to be generic priority values should be above '0x0f'.
IRQ0 - default priority (low prio)
IRQ1 - 0x0 (highest prio)
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
The latency measurement are not designed to run on multiple CPUs,
so limit it to just 1 CPU.
Fixes#26264
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is a test, and the function is called with K_FOREVER, so it's not
supposed to fail.
Fixes: #25735
CID: 210582
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The timeout for testing advertisement extensions in babblesim
was set to 30 seconds. Depending on the hardware used for
testing this may be too low. Increased to 120 seconds
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Many issues:
- heapmem[] is of type uint64_t meaning that it contains HEAP_SZ * 16
bytes but the heap is initialized with only 1/16 of that, making
this test's memory footprint way too large.
- The test to ensure the heap is empty uses an allocation size of
(heap_end - heap_start - 8) which is wrong as heap_end and heap_start
are uint64_t pointer types and therefore their difference will be 8x
smaller than intended. Furthermore, the 8 here is unnessary as the
chunk header size is already included in the location of heap_start.
- The heap start address misalignment bare no purpose as the misaligned
start of the free heap is already controlled by the variable prefix
allocation size.
- Alignment and sizes should rather be expressed in terms of size_t
rather than uintptr_t.
Fix those issues, and add a few more test angles:
- Make the prefix allocation itterate across the entire alignment range
to exercize all possible misalignments.
- Vary the aligned allocation size to better exercize the pre-alignment
allocation and suffix handling.
- Double the aligned allocation to add more variability in the heap
structure.
- Test the testing of emptiness by making sure that no more allocations
are possible when we think we allocated it all.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Sleeping for a full second at startup is needless. The currently
enabled subsystems on platforms that run this test don't even have any
other threads running at startup, so we're guaranteed the other core
is in idle before we even reach main(). Just a few ms is plenty.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The width for %p on 32-bit targets should be 8 regardless of
CONFIG_PRINTK64. Adjust the test accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Plus corresponding configuration file for the spi_loopback test that
will be activated for that board by this added capability.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Test is configured with CONFIG_POSIX_API=y, so there is no reason to
check for it being enabled in C. Additionally when CONFIG_POSIX_API=n a
much "bigger" posix/sys/socket.h was included instead of net/socket.h,
which should be rather opposite.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This sample is not working on all boards anymore. Adding every single
shell we have to the prj.conf does not work on every board, due to
missing features.
Instead, we now change how shell modules are enabled and make it
possible to enable shell command and modules for any application when
CONFIG_SHELL is enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add timer label for this test suite, so it is included
in sanity check runs with -t timer.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
After the Qemu Cortex-M0 timer driver rework, we may
enable the test-suite that had been (always) excluded
from running on this platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
After the Qemu Cortex-M0 timer driver rework, we may
re-enable the test-suite that had been excluded for this
platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
After the Qemu Cortex-M0 timer driver rework, we may
re-enable the test-cases that had been skipped for this
platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add support for 64 bit conversions in a uniformly expressable way by
printing values backwards into a buffer on the stack first. This
allows all operations to work on the low bits of the value and so the
code doesn't need to care (beyond the size of that buffer) about the
word size. This trick also doesn't care about the specifics of the
base value, so in the process this unifies the decimal and hex printk
conversion code to a single function.
This comes at a mild cost in CPU cycles to the decimal converter and
somewhat higher cost to hex (because it's now doing a full div/mod
operation instead of shifting and masking). And stack usage has grown
by a few words to hold the temporary. But the benefits in code size
are substantial (e.g. ~250 bytes of .text on arm32).
Note that this also contains a change to tests/kernel/common to
address what appears to have been a bug in the original converters.
The printk test uses a format string that looks like "%-4x%-2p" and
feeds it the literal arguments "0xABCDEF" and "(char *)42".
Now... clearly both those results are going to overflow the 4 and
2-byte field sizes, so there shouldn't be any whitespace between these
fields. But the test was written to expect two spaces, inexplicably
(yes, I checked: POSIX-compatible printf implementations don't have
those spaces either).
The new code is definitely doing the right thing, so fix the test
instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If we have multiple network interfaces and we are waiting incoming
network packets, make sure to honor the bind of the socket so that
correct socket will receive data in certain network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1.Add a new testcase to verify multiple queues can be defined
2.Add some code comments to describe function performance.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Increased accepted difference between system clock and
k_busy_wait clock. Some platforms (e.g. Nordic SoC) are using
different clocks for system clock (low frequency) and k_busy_wait
(high frequency). If those clocks are driven from low accuracy
source like RC oscillator then difference may be significant.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added new doxygen tags for tests:
1. test_mem_domain_destroy
2. test_domain_add_part_drop_to_user
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Reason is that some threads tests have poor description Doxygen
tags. I decided to fix that situation in some tests which understand.
Update Doxygen tags for the next tests:
test_create_new_supervisor_thread_from_user()
test_user_mode_enter()
test_create_new_higher_prio_thread_from_user()
test_create_new_thread_from_user_huge_stacksize()
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Device objects in Zephyr are currently placed into an array by linker
scripts, making it easy to iterate over all devices if the array
address and size can be obtained. This has applications in device
power management, but the existing API for this was available only
when that feature was enabled. It also uses a signed type to hold the
device count.
Provide a new API that is generally available, but marked as internal
since normally applications should not iterate over all devices. Mark
the PM API approach deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
PA selection mainly depends on board design. So it looks like
device-tree is a better mechanism than Kconfig in this case. Use string
property with two possible values: "rfo" and "pa-boost".
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Test of the sys_heap_aligned_alloc() API. This is separate from the
existing heap test because aligned_alloc() requires a kconfig to
enable it that can change the heap block header format and will impact
code coverage of the "small" block variant.
It's a fairly simple whitebox test that instantiates a heap and then
enumerates all possible alignments within it, with and without
pre-allocated data, to verify that the resulting memory is correctly
aligned and the heap stays consistent.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This is done to support the idiomatic way of performing flush
operations, where the caller might not have access to the proper data
pointer. Also, there is no reason why reading from address 0 should
not be allowed.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
With addition of flash_get_parameters API call, it is needed to provide
support for the API to flash drivers.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This test has a very high failure rate on `qemu_arc_em` and needs to be
disabled until a fix is available.
To be addressed in #26163.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Passing TX messages from sockets was reworked for openthread
thus tests need to be created/updated in order to pass.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
A hardcoded path lenth of 80 will not be able to suppor the full length
of 255 when LFN is enabled. This does produce a compiler error,
thankfully, this is only applicable to the test cases.
Signed-off-by: Roman Vaughan <nzsmartie@gmail.com>
After reviewing that test I found output looks too messy.
1. Remove words starting from capital letter in the middle of the
sentence.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
This tests make sure that the right source address is chosen during
the mesh multicasting.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
This commit removes API functions and macros which were deprecated in
2.2 release. GPIO drivers are updated accordingly.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Update code comments in ringbuffer/src/main.c
modify a testcase to verify the address stored by ring buffer
is contiguous, and the size of every element is equal to the size of
pointer.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Introduce new test for eventfd, which will test it in only basic
scope. The real reason why this is introduced is to have a test with
minimal set of configuration dependencies, such as disabled
pthreads (compared to full tests/posix/eventfd/ variant). This allows to
test eventfd mechanism with both POSIX_API=n and POSIX_API=y.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The test takes ~175s to end on nrf5284dk_nrf52840 and was failing
due to too short default timeout (60s).
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Unit test code requires IPv6 to be ready. Select
CONFIG_NET_CONFIG_NEED_IPV6=y to ensure that.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Unit test code requires IPv6 to be ready. Select
CONFIG_NET_CONFIG_NEED_IPV6=y to ensure that.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
for RT series CONFIG_NOCACHE_MEMORY need enabled
for Kinetis series CONFIG_DMA_TEST_SLOT_START for test
modify the target and dest alignment
frdmk64f need replace strlen to sizeof in irq callback
clean the unused receive buffer, so output is tidy
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Update compile.sh and added test_script, so that
bsim_test_advx bsim_test application is built and run in
CI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit is a followup to PR #25808 which updates the tests to
ensure the REQUIRED keyword is also used for the ZephyrUnitest package.
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
add new test cases to illustrate the zephyr OS
support an array of atomic variables, each bit
of which can be modified.
Signed-off-by: Ying ming <mingx.ying@intel.com>
Added separator (e.g. comma or semicolon) parameter to FOR_EACH_ family.
Separator is added between macro execution for each argument and not at
the end.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fixed occasional test failures when clock was not ready after
specified time.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Test fails on this one platform, to unblock other changes, skip the test
while the issues is being looked at. This test never ran on this
platform before due to ram restrictions.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
rename boot_delay function name for clarity and change doxygen group to
be more generic and part of the init group.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove all ram restrictions in kernel tests and revisit all tests and
try to make them pass on all platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reason is that some tests have poor description in Doxygen tags,
decided to fix that situation in some tests which I understand.
Also remove small misprints from some parts of code.
Update Doxygen tags for the next tests:
test_access_kobject_without_init_access
test_thread_without_kobject_permission
test_bad_syscall
test_syscall_invalid_kobject
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The converted target value for remaining ticks was increased by one to
match original code, which used a one-sided test. The current test is
two-sided, so that increment is already present in the allowed 1 tick
error for boards with no slew, and incorporating it into the absolute
error can cause the test to fail.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add two testcases,one of them verify rbtree node can be embedded
in any user struct.
And another verify some operations in logarithmic time.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
1. Shorten the long function body for test_poll_wait() to
increase readability, split it into below two method:
test_poll_wait(),
check_results().
2. Adjust annotations for below poll test cases:
test_poll_wait(),
test_poll_cancel(),
test_poll_threadstate().
Signed-off-by: YouhuaX Zhu <youhuax.zhu@intel.com>
1. Add a new testcase for defining and initializing pipes at run time.
2. Add details comments for some testcases.
Signed-off-by: Zhu YouhuaX <youhuax.zhu@intel.com>
This commit fixes Cortex-M header inclusions from the deprecated paths.
The Cortex-M headers were relocated from `include/arch/arm/cortex_m` to
`include/arch/arm/aarch32/cortex_m` by the refactoring done in the
commit d048faacf2.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This test was configuring the system tick period to 1 second.
The test also constantly aligns to system tick boundaries,
in between each test part, which means the test runs for very long
(it is holding for longer than 1 minute just on those waits between
tests alone).
The nrf sys tick driver configures the RTC to produce still
all RTC interrupts at 32KHz intervals, which cause lots of
interrupts which slow down simulation quite bit.
Overall the test could take longer than 30 seconds in the
nrf52_bsim in CI even that this platform simulated time is decoupled
from real time.
=> Add a new config overlay for the nrf52_bsim board so
we configure there a much higher system tick frequency
It does not affect the test in any way more than shortening
the wait periods between in test part.
Also increment the sys tick to twice per second to speed up
the test in other platforms.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
As the int types defined in include/zephyr/types.h are typdef's we
utilize a Kconfig option (LEGACY_ZEPHYR_INT_TYPES) to enable/disable
the support for them. By default to LEGACY_ZEPHYR_INT_TYPES not
being enabled and add an explicit test to ensure the types continue to
function until removed in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move to using PRIu64/PRId64 instead of %llu/%lld since on
native_posix_64 the uint64_t/int64_t type is defined in terms of 'long
int' and not 'long long int'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When millisecond/tick conversion is not exact tick delta's are
dependent on the initial tick value. In those cases exact comparisons
need to also allow an adjacent value.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When HFCLK has a slew making it faster than LFCLK the busy wait can
expire before the timer fires.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Reduce the duration of the timer test so that it will fire before the
busywait elapses even in the worst case of slew between the tick and
busy-wait clocks.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This test sets a timer using one clock, waits using a second clock,
then sees whether the remaining time is the expected value. When the
two clocks are skewed the comparison requires a threshold. Provide a
means to estimate the maximum expected error.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When test is performed, it assumes that no other entity is changing
the state of the clock. That was not true because calibration was
turning on/off high frequency clock.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This socket is shared by all the test cases which run in
different threads. Just make it a global object here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Certain types of system call validation may need to be pushed
deeper in the implementation and not performed in the verification
function. If such checks are only pertinent when the caller was
from user mode, we need an API to detect this situation.
This is implemented by having thread->syscall_frame be non-NULL
only while a user system call is in progress. The template for the
system call marshalling functions is changed to clear this value
on exit.
A test is added to prove that this works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we are calling sendmsg() without any aux data, then msg_controllen
is 0 and msg_control is NULL. Check these allowed values properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are calling sendmsg() for a connected socket, then msg_namelen
is 0 and msg_name is NULL. Check these allowed values properly.
Also modify unit tests so that we test this scenario.
Fixes#25925
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adjusting the input value to allow round to nearest can cause an
overflow which invalidates the expectation that the 32-bit result is
the low 32 bits of the 64-bit result. If the adjustment overflows do
the full-precision conversion and truncate in the caller.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When CONFIG_POLL was set, it was historically true that the queue
could (if a higher priority thread "stole" an insert) return a
spurious NULL instead of continuing to wait on a timeout.
This deliberately exercises that race.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The k_queue data structure, when CONFIG_POLL was enabled, would
inexplicably use k_poll() as its blocking mechanism instead of the
original wait_q/pend() code. This was actually racy, see commit
b173e4353f. The code was structured as a condition variable: using
a spinlock around the queue data before deciding to block. But unlike
pend_current_thread(), k_poll() cannot atomically release a lock.
A workaround had been in place for this, and then accidentally
reverted (both by me!) because the code looked "wrong".
This is just fragile, there's no reason to have two implementations of
k_queue_get(). Remove.
Note that this also removes a test case in the work_queue test where
(when CONFIG_POLL was enabled, but not otherwise) it was checking for
the ability to immediately cancel a delayed work item that was
submitted with a timeout of K_NO_WAIT (i.e. "queue it immediately").
This DOES NOT work with the origina/non-poll queue backend, and has
never been a documented behavior of k_delayed_work_submit_to_queue()
under any circumstances. I don't know why we were testing this.
Fixes#25904
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The tests normally verify that pin configuration succeeded by checking
the return value. That's not necessary on the cleanup path, so
expressly ignore the result.
Also lift the common code to before the exit branching.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add test cases that verify various bits and pieces of the legacy
devicetree macros match the new APIs.
Writing these test cases without giving rise to deprecated macro
warnings which might break people's CI if they build with -Werror
requires turning off the __WARN() generation in
devicetree_legacy_unfixed.h. The entire file is deprecated at this
point and must be explicitly enabled with an opt-in Kconfig option, so
there isn't any harm in doing this.
Nevertheless, take a minimally invasive approach to avoiding __WARN()
generation in gen_legacy_defines.py, to avoid the possibility of
breakage. This code is basically frozen anyway, so hacks like this
won't cause maintainability problems since it isn't being actively
maintained.
Use the new tests as fodder for a migration guide from the old API in
the documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is preparation for an additional test suite specifically for the
legacy API which will be added next.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
At some point, "child-binding:" apparently only worked up to 2 levels
deep. That's not the case anymore, but add a regression test to make
sure that doesn't break. 3 levels deep ought to be enough for anyone.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Added configuration which allows to run test-suite
on nrf52840dk_nrf52840 and nrf52dk_rf52832 boards.
fixes#25701
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Increase the main thread stack size for this test
to 2048; this increase prevents stacking errors in
the main thread, in several Cortex-M platforms.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
