This feature predated the tickless kernel and has been in legacy mode
for a while. We now have no drivers or systems that do not support
tickless, so remove this option and cleanup the code to only use
tickless.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds Friendship tests to the Bluetooth Mesh BabbleSim test suite. The
friendship tests cover all basic friend establishment and message
sending scenarios, including coverage for previous regressions, such
as #29544, #32033 and #30657.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a test suite for Bluetooth Mesh in bsim_bt tests, including 10
tests for common transport behavior. This test suite includes a readme
and a simple framework for adding more mesh tests in the future.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The way these scripts looked for the current working directory
was not correct or reliable. With this change it should
work properly.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Set SEARCH_PATH to "." instead of `pwd` if not set explicitly. This
avoids the construction of paths that contain `pwd` twice in test
scripts such as ll.1.sh.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
ATT channels do support queueing buffer so it no longer need to block
waiting the tx_sem besides the buffer allocation already serves the
same purpose as the application will not be able to have more requests
than there are buffers available.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix BIG Sync Terminate Command to generate Sync Established
event if Sync initiation is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The test currently does nothing, as it depends on the
advertiser part of the test which has not yet been implemented
properly. Also slightly modified how the test is run.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed the node_rx argument for the BIG create/terminate
functions. The event should not be sent right after the
command, but needs to wait for transmissions of
empty BIS packets or BIG terminate indications.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a initial ISO broadcast test case that simply
creates, waits and terminates a BIG using the ll API.
The newly created test directory can be expanded to contain
connected ISO (CIS) tests as well in the future.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix maximum Advertising Channel PDU payload size calculation
by including the Common Extended Advertising Payload Format
overload alongwith the AD data maximum size supported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enable the test procedure that requires greater than 31 byte
PDU when AD data and Sync Info structure be present in the
Advertising channel PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds a `destroy` callback to the `struct bt_gatt_indicate_params` which
is used to signify to the application that the indication operation has
completed and the struct instance can be freed/destroyed.
This is required as the number of indication value callbacks that will
be triggered is not known by the caller when the `conn` parameter is
`NULL`.
Tracking when this callback should be run is mananged by a private
reference counter inside the struct.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the signature of the `bt_gatt_indicate_func_t` callback type by
replacing the attr pointer with a pointer to the
`bt_gatt_indicate_params` struct that was used to start the indication.
This allows the callback to free the `bt_gatt_indicate_params` instance
if it was allocated from storage, while still allowing the
`bt_gatt_attr` value to be accessed through `params->attr`.
Allocating the `bt_gatt_indicate_params` instance from storage is
desirable as multiple indications can be queued, however each instance
must be valid until the callback is run.
Implements API update from #29357
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Added test implementation for test driven development of
Periodic Sync feature support in the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds few tests for handling scan response in ext commands:
- trying to set scan response on non-scannable instance should fail
- it should be possible to create scannable instance, set scan data,
enable and then disable set
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
The value of adv_type shall be 0x07 for extended advertising, it will
be converted to 0x05 inside ll_adv_params_set after some checks.
This did not cause any issues with tests since input parameters in
already implemented test cases do not test any code that was skipped
by invalid parameter, however obvious one side-effect is that phy_p
would be always set to 1M regardless of input parameter so any test
case using Coded on primary would fail.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Increased sim_length value to 60 seconds so as to meet the
current length of 13.56 seconds and any future test timing
increases in the near future.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update bsim test to test Periodic Advertising Enable and
Disable alongwith Extended Advertising Enable/Disable.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Disable test with long AD data being set, as 251 byte
Advertising PDU is not yet supported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The timeout for testing advertisement extensions in babblesim
was set to 30 seconds. Depending on the hardware used for
testing this may be too low. Increased to 120 seconds
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Update compile.sh and added test_script, so that
bsim_test_advx bsim_test application is built and run in
CI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Instead of using its own buffer pool use one already available by
HCI_RAW which are accessible with bt_buf_tx_get.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update EDTT default configuration to make it easier to debug. The
use of maximum log level to restrict default output caused some
confusion. Instead remove debug options to reduce the default log
output. Enabling debug logs is now similar to other samples and tests.
Remove options commented out, no need to keep them.
Move comment to the matching CONFIG.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
