We have convenient PHY_1M, PHY_2M and PHY_CODED symbols defined but
they are not used too much in the code. This replaces all usages of
magic numbers and other symbols as PHY constants with those symbols.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Adds an assert on the "old" ref counter when doing unref, that
checks if there indeed is a reference to unref. This prevents
any underflows of the ref counter.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements the ull_sync_iso_setup function which starts the
ticker for ISO sync. Furthermore, ll_big_sync_terminate
will not stop the ticker as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements handling of the BIG sync commands in the ULL.
LLL support and handling of ACAD (biginfo) remaining.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adjust the PPI used by nRF51x and nRF52x so that PPI 0-5 is
available for application's use or for SW PWM driver use.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Under CONFIG_BT_TICKER_EXT configuration, the ticker interface has been
extended to support enabling/disabling must-expire scheduling. This
means that conn and slave ticker start calls can now omit must-expire
default-on configuration, relying on LLL updating the mode as needed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The idle, when power management is enabled, requires system clock to
be present.
This commit adds dependency, to PM option, on SYS_CLOCK_EXISTS.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Convert drivers to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert drivers to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit replaces the 'select SHELL' statement with
'depends on SHELL' in OPENTHREAD_SHELL config option.
This ensures, that shell will not be implicitly enabled
when OpenThread stack is built.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
During recent upmerge OPENTHREAD_CONFIG_PLAT_LOG_FUNCTION__COUNT_ARGS
macro was renamed to OPENTHREAD_CONFIG_PLAT_LOG_MACRO_NAME__COUNT_ARGS
but the code wasn't updated where the macro is actually used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Align bt_le_per_adv_sync_get_index, bt_conn_index and
bt_le_ext_adv_get_index in use of uintptr_t.
This fixes an issue where the cast to uint8_t happened before the
assert for a valid index, which could lead to invalid pointers passing
this assert.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Improve logging of pairing procedure when it fails with error code
unspecified. Since this is returned in many places debugging this
failure is not easy without adding additional debugging.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix parallel pairing procedures using LE SC requiring the DHKey
calculation at the same time. This would otherwise end all other
pairing procedures with the SMP error code "unspecified" since
the call to bt_gen_dh_key would fail.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set the allowed command bitmask before sending the SMP packet. This
avoids a race-condition in case the sending of the PDU made the
current thread not ready and would not be scheduled back in time
to set the bit before receiving the next SMP packet.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Improve multiple DHKey handling by allowing the next DHKey calculation
to be started in the dhkey ready callback.
Return error code EALREADY if the provided callback is the current
callback generating the DHKey.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We allocate nodes on receiving AUX_CONNECT_REQ, but we can only use
them if AUX_CONNECT_RSP is sent successfully. If that fails, we need
to release those nodes.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
If we allocate a node in LLL and it turns out that we don't need it
(e.g. allocated connection on AUX_CONNECT_REQ, but connection handshake
did not complete and we don't need it) we still need to send it to ULL
to be released. We can use existing NODE_RX_TYPE_DC_PDU_RELEASE node
type for this purpose, but we just need to make sure it's passed from
LLL to ULL properly.
Also, since this now does not only release DC PDUs, let's change its
name to a more generic one.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
After slave connection is created only adv instance is stopped, we also
need to stop aux separately if enabled.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Make sure phy is properly initialized to 1M when ext adv is supported
and legacy advertising instance is being enabled.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds handling for received AUX_CONNECT_REQ PDU which enables slave
connection with extended advertising.
Once AUX_CONNECT_REQ is received, standard checks are performed to
determine if we have resource to create connection, however unlike for
CONNECT_IND an rx node is temporarily kept in LLL until AUX_CONNECT_RSP
is successfully sent. This is to prevent creating a connection in case
response PDU was not sent for whatever reason.
A separate scratch buffer is created for AUX_CONNECT_RSP since default
radio scratch buffer is already used by received AUX_CONNECT_REQ.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Connection structs need to be initialized when advertising is enabled
on connectable extended advertising instance.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Connection created from extended advertising instance uses the same phy
as on secondary channels.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
transmitWindowDelay is either 2.5ms or 3.75ms when AUX_CONNECT_REQ is
used (for 1M/2M and Coded respectively). It also uses the same unit
as transmitWindowOffset (1.25ms) so we can just simply add both.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
The same helper will be used for legacy and extended advertising so we
better pass AdvA and TargetA directly instead of complete advertising
PDU. This is because those fields are at different locations in legacy
and extended advertising PDUs so caller can figure them out.
Also, we can now check for directed advertising using TargetA since it
will be only supplied for such advertising (NULL otherwise).
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Release the LF clock requested in blocking mode used to wait
to settle, which has already been asynchronously requested.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix lll_clock_wait function to wait for LF clock to settle
only once after power up.
Regression introduced in commit 2b4763076e ("bluetooth:
controller: Adapt to onoff clock control").
Fixes#30480.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Clean up included header files, remove including
zephyr/types.h and other deprecated or redundant
header files.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reordering of the struct elements to match the Linux format.
The __packed() is not necessary anymore.
std_id and ext_id is merged to id in the frame and filter.
Additionally, the frames are ready for CAN-FD.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
The previous API can't change the sampling-point and only allowed
bitrates that fit the time segments.
The new API allows for shifting the sampling-point and adjusts the
number of time quantum in a bit to all more possible bitrates.
The functions to calculate the timings are moved to the can_common file.
They can be used for all drivers.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
If the SRC field of the received message is a unicast
address of an element of the Low Power node, then the
message shall not be stored in the Friend Queue.
Otherwise, lpn will discard this message, eventually
it breaks friendship.
Fixes: #30657
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
If getaddrinfo() was called with AI_PASSIVE flag in hints,
returned address defaulted to SOCK_STREAM and IPPROTO_TCP.
Fixed so that SOCK_DGRAM leads to correct address type
that can be fed to bind() directly.
Same hard coding was visible when numerical IPv4 address string
was converted to binary. That is also fixed to respect hints now.
Also, added functionality to get IPv6 address, when hints contained
AF_INET6.
Fixes#30686
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Validate the disconnect reason in the disconnect command, according
to the the core specification.
7.1.6 Disconnect command:
Authentication Failure error code (0x05), Other End Terminated Connec-
tion error codes (0x13 to 0x15), Unsupported Remote Feature error code
(0x1A), Pairing with Unit Key Not Supported error code (0x29) and Unac-
ceptable Connection Parameters error code (0x3B).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Return the error code from the disconnect command to the application
when an invalid disconnect reason has been provided.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When needing to lock non-connection related access, use k_mutex
instead of locking irq. There is really no reason to prevent the
system from generating interrupts.
Fixes#30636
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add thread runtime statistics to the thread analyser.
With CONFIG_THREAD_RUNTIME_STATS enabled:
Booting from ROM..*** Booting Zephyr OS build zephyr-v2.4.0-2330-g77be0e93e65b ***
thread_a: Hello World from cpu 0 on qemu_x86!
Thread analyze:
thread_b : STACK: unused 740 usage 284 / 1024 (27 %); CPU: 0 %
thread_analyzer : STACK: unused 8 usage 504 / 512 (98 %); CPU: 0 %
thread_a : STACK: unused 648 usage 376 / 1024 (36 %); CPU: 98 %
idle 00 : STACK: unused 204 usage 116 / 320 (36 %); CPU: 0 %
thread_b: Hello World from cpu 0 on qemu_x86!
thread_a: Hello World from cpu 0 on qemu_x86!
thread_b: Hello World from cpu 0 on qemu_x86!
thread_a: Hello World from cpu 0 on qemu_x86!
thread_b: Hello World from cpu 0 on qemu_x86!
thread_a: Hello World from cpu 0 on qemu_x86!
thread_b: Hello World from cpu 0 on qemu_x86!
thread_a: Hello World from cpu 0 on qemu_x86!
Thread analyze:
thread_b : STACK: unused 648 usage 376 / 1024 (36 %); CPU: 7 %
thread_analyzer : STACK: unused 8 usage 504 / 512 (98 %); CPU: 0 %
thread_a : STACK: unused 648 usage 376 / 1024 (36 %); CPU: 9 %
idle 00 : STACK: unused 204 usage 116 / 320 (36 %); CPU: 82 %
thread_b: Hello World from cpu 0 on qemu_x86!
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add new shell module for mcuboot enabled application. It provides
information about image slots and allows to perform such operations as:
confirm, erase and request upgrade.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
is_rodata() can now determine if an object is the rodata section
on SPARC. This eliminates spurious run-time error messages about
"missinglog_strdup()".
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Add implementation of HCI_LE_Set_Connectionless_CTE_-
Transmit_Parameters command in HCI.
Add implementation of command handling in controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Sets the LPN state to WAIT_UPDATE when waiting for the initial poll
response when disabling LPN_ESTABLISHMENT. Previously, the LPN node
would stay in the wait offer state even after the offer was processed,
which led to it aborting the friend establishment completely if it
failed to receive the first poll.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
While the friend node considers the friendship established as soon as it
sends the friendship offer, the LPN only considers the friendship
established once it receives the first update after its poll. This
update is encrypted with the friendship credentials, which aren't
available, as they're protected by an if (lpn_established()) check.
Changes the check to lpn_waiting_update(), which makes the LPN check its
friendship credentials only when it's expecting a response to a poll
message. This is the only time the friend will send messages encrypted
with the friendship credentials.
This is a regression from #28511.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Explicitly sets the LPN credentials when sending a friend request.
This fixes a regression from #28511.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Do not abort pairing when peer sends a SMP command with an opcode
reserved for future use, as per spec.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add a dummy SMP command handler for keypress notification, that does
nothing (yet). This allows the next commit to work properly.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Remove NET_CONFIG_SETTINGS Kconfig option. The net settings should
be enabled from now at project config or at any overlay. This is
necessary to allow better control when application should start.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Current logs only prints default logs level. Add LOG_LEVEL at updatehub
to switch to another variation based on CONFIG_UPDATEHUB_LOG_LEVEL.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Fix TIMER0 and RTC0 being selectable when using out-of-tree Bluetooth
controller.
Generalize the Kconfig to have the features that use the HW peripheral
select them as reserved to make the dependencies more manageable.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
A dedicated LwM2M execute callback type has been implemented which
supports execute arguments. The lwm2m engine, lwm2m_client sample and
lwm2m objects have been updated accordingly. Also the API change has
been documented, and the lwm2m engine reference has been updated.
Fixes#30551.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
Put everything inside an if, we should not see anything related to
hawkbit in generated .config if it is not enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put everything inside an if, we should not see anything related to
updatehub in generated .config if it is not enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Bluetooth Mesh require minimum limit time to enter iv update
state or return to iv nornal state.
For Zephyr bluetooth mesh implementation, use`ivu_duration`
type `uint8_t` to represent current time, but if the time is
more than 255 hours, there will be problems due to the
overflow of 8-bit unassigned variables.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The K_MSEC macro evaluates its argument twice, which causes double
evaluation of some function calls in the mesh stack.
This removes all instances of function calls inside K_MSEC macros in the
mesh stack.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Added a new Bluetooth API that can be used to read the current and
maximum transmit power level of the radio. The reading operation is
performed over HCI.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Previously, if the peer address was not set, the host would
do undirected advertising even if the application applied
options only applicable to directed advertising.
Adding this additional parameter validation reduces the confusion
of application developers when they have configured something wrong.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
`POLL_TIMEOUT_MAX` should use `CONFIG_BT_MESH_LPN_POLL_TIMEOUT`
instead of `CONFIG_BT_MESH_LPN_INIT_POLL_TIMEOUT`. The described
algorithm to grow the poll timeout implemented in function
poll_timeout does not work with this implementation.
It's a regression in 3b4d58a
Bluetooth: Mesh: optimize performance for lpn node
Fixes: #30338
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Release the CUI/CPR lock if the connection owning the lock is
terminated.
This can happen if a device performing a CUI/CPR procedure gets a LSTO
before the procedeure completes or the procedure itself TO.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
`app_key_del` first param should be key_app_idx,
not key_net_idx.
The effect is that app_key_del is broken.
It's a regression in eca014115
Bluetooth: Mesh: Isolate cryptographic material
Fixes: 30468
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Add option to enable software CSMA backoff in the OpenThread MAC layer.
This allows to run CSMA procedure correctly in radios that do not
support hardware CSMA backoff, and use them as RCP, where this feature
is required.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds a missing otPlatSettingsDeinit function
to the Zephyr OpenThread platform implementation.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Cleanup code for power management and remove some duplication and
isolate power management code from the kernel code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds support for extended advertiser commands in the mesh. This doubles
throughput for common packet sending, and significantly improves timing
accuracy for the Friend and Low Power features.
The proxy module's advertisement control has been moved inside the adv
module to abstract away the different advertiser modes.
The extended advertiser mode does not need an advertising thread to
operate, and ends up with a net reduction in RAM usage.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Previously, lwm2m_engine set would check against the max_data_len
parameter of the ressource, but didn't take into consideration the
(possibly changed) max_data_len returned by the pre_write callback.
Fixes#30541
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
In mqtt_keepalive_time_left(), return -1 if keep alive messages are
disabled by setting CONFIG_MQTT_KEEPALIVE=0.
This allows to use mqtt_keepalive_time_left() directly as an input
for poll(). If no keep-alive is expected, -1 would indicate
that poll() can block until new data is available on the socket.
Signed-off-by: Simen S. Røstad <simen.rostad@nordicsemi.no>
Use the core k_heap API pervasively within our tree instead of the
z_mem_pool wrapper that provided compatibility with the older mempool
implementation.
Almost all of this is straightforward swapping of one alloc/free call
for another. In a few cases where code was holding onto an old-style
"mem_block" a local compatibility struct with a single field has been
swapped in to keep the invasiveness of the changes down.
Note that not all the relevant changes in this patch have in-tree test
coverage, though I validated that it all builds.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This tiny header uses non-builtin types but includes no headers that
would define them. Recent header motion seems to have exposed a case
where this file can get built before its dependencies are included.
Add the header directly.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Mark all k_mem_pool APIs deprecated for future code. Remaining
internal usage now uses equivalent "z_mem_pool" symbols instead.
Fixes#24358
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When CONFIG_BT_CTLR_CONN_META is enabled and the ticker "must_expire"
feature is used, collisions may cause incorrect decrement of the
supervision_expire counter, resulting in a too early link supervision
timeout.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The commit removes a leftover configuration of the log management that
has never worked and has been removed with the commit
0bb466c34e4fe863733a929baa8f51981263ce3d to apache/mynewt-mcumgr.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Fix incorrect initiator window offset used when in continous
initiator scanning. Calculated window offset to free time
space after existing central connections is not decremented
correctly when there is change in window at every initiator
scan interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix corruption of ftr auto-variable due to reuse to insert
new node rx into the received auxiliary PDU chain, which can
cause corrupt reference used later in the implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix PHY Update control procedure to accept the preferred Tx
coding options (S2 or S8) requested even if there is no
actual PHY change happening on procedure completion.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Both AdvA and TargetA have constant offset in extended header so it
makes sense to have dedicated definitions for those numbers.
AdvA is always placed at the beginning on extended header while TargetA
follows AdvA directly. There are no PDUs without AdvA and with only
TargetA.
Offsets of other fields depends on extended header contents and thus
are non constant.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
'ext_hdr' member only covers extended header part of 'ext_hdr_adv_data'
and with addition of 'data' member to 'pdu_adv_ext_hdr' those can be
used to quickly access both extended header flags and data directly
from 'pdu_adv' without need for extra local variables and casts.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
pdu_adv_hdr name is quite confusing since it suggests some generic
header for advertising PDUs while this in fact is extended header
which is a part of common extended advertising payload and only applies
to extended advertising PDUs.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
The 'adi' part of that member name does not make sense since ADI is
already part of extended header, so we only have 'extended header' and
'advertising data'.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
If handle mapping is enabled, we need to use proper advertising set
handle in HCI event.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
When legacy set is configured we need to make sure scan response is
properly initialized with empty data. For extended sets we should not
touch scan response on configure since data for those sets have to be
set explicitly, e.g. we cannot enable scannable advertising set if no
data was set.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
It was possible that settings_line_entry_copy() did unaligned
flash write.
This patch introduce respecting the flash write-block-size.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
AdvA in extended advertising PDUs was only set if random address was
used. This patch enables proper support for AdvA/TgtA in those PDUs
also with LL Privacy enabled.
On enable, we always update advertising PDU (i.e. ADV_IND, ADV_EXT_IND
or ADV_AUX_IND, depending on advertising set parameters) as well as
scan response PDU.
On RPA timeout, we simply copy old PDU as-is and update AdvA in new
PDU, since both PDUs are exactly the same (except AdvA) so no need to
recreate it step-by-step.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Guards the functions with CONFIG_BT_CTLR_HCI_ADV_HANDLE_MAPPING
and added a non-HCI inline function for them.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the node_rx argument for the BIG create/terminate
functions. The event should not be sent right after the
command, but needs to wait for transmissions of
empty BIS packets or BIG terminate indications.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Moves the ISO tx pool and functions from ull_adv_iso.c to
ull_iso.c as the pool and functions will be shared between
BIS and CIS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rearranged the functions so the order of functions match
the common pattern in other ULL files.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements the BIG terminate command that terminates a
BIG and returns the appropriate events.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When a BIG is create, it will now start sending empty BIS PDUs;
at least from an ULL perspective, as the LLL support is still
missing.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implements handling of the BIG create command in the upper link layer.
Does not yet handle sending any BIS events.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The immediate logging option cannot be used with network logging
support CONFIG_LOG_BACKEND_NET as that would cause the generated
rsyslog messages to be malformed. The UDP packets would only have
one byte payloads which is not correct. So make sure that user is
not able to select a configuration with immediate mode and network
logging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix Extended Scanning on Coded PHY, auxiliary PDUs on Coded
PHY where not received due to redundant conditional code
only applicable in connection role being copy-pasted during
the development of Extended Scanning feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use memmove to copy overlapping memory when populating the
Common Extended Advertising Header Format in the advertising
PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix maximum PDU len configuration when advertising and/or
scanning on primary channels.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The message should only be returned if the requested pending/reply
pointer is not NULL. Otherwise it could get an incorrect match (for
instance if specific pending pointer is searched for and reply is NULL
the function could return any message that doesn't expect a reply (and
thus has its reply pointer set to NULL).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M engine by default sends piggybacked responses for requests after
all callbacks are executed. This approach however isn't good enough if
the application callback executes some lenghty operations (for instance
during FW update). Delaying the ACK may result in unnecessary
retransmissions.
This commits adds an API function which allows to send an early empty
ACK from the application callback. This prevents further retransmissions
from the server side. After all callbacks are executed, the LwM2M engine
will send the response as a separate CON message.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Change type of advertising set handle to 8 bit to comply with
Bluetooth Core spec. type.
Fixes wrong usage of adv. set handle variable in function
bt_le_per_adv_set_param.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Remove irq_lock around connection lookup, this is no longer needed
now that the lookup functions always have a valid reference.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make the connection lookup functions thread-safe by re-using the
bt_conn_ref returning NULL mechanism and keeping a valid reference.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Make bt_conn_ref return NULL if the reference count has reached zero.
This makes it possible to re-use bt_conn_ref internally to re-use the
reference count mechanism to check if the reference is in use.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use common definitions of HAL_USED_PPI_CHANNELS and HAL_USED_PPI_GROUPS
macros that will provide (through z_bt_ctlr_used_nrf_ppi_* variables)
information about either PPI or DPPI (depending on the SoC) resources
used by the Bluetooth controller.
Update also the hal_nordic module revision, to make the related nrfx
allocator aware of those reserved DPPI resources.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove no longer needed definition of NRFX_PPI_CHANNELS_USED_BY_PWM_SW
(after recent changes in the nrf_hw_models models, also for simulated
nRF boards the nrfx_glue.h file is processed, so this symbol is always
defined).
Remove also a couple of *_PPI_x_INCLUDE macros, to make the code a bit
clearer and to avoid things like a build assertion (also removed here)
that checks if HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI_0_INCLUDE is indeed
defined as BIT(HAL_SW_SWITCH_GROUP_TASK_DISABLE_PPI(0)).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
For USB mass storage class, a fixed size 16 KiB FAT12 ramdisk
is forced. This is not really visible to the user and
the DISK_RAM_VOLUME_SIZE option is ignored.
There is no use of such a small file system and for USB MSC
testing, like throughput or USB3CV, a file system is not necessary.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
When testing the bmi160 I've come across an issue where the readings
didn't make sense to me. The issue comes from reading the
BMI160_SAMPLE_BURST_READ_ADDR which is 0x0C assuming both accelerometer
and gyroscope. At this point we would normally read 12 bytes
(2 bytes per sample * 3 axes * 2 sensors). This reading takes place in
bmi160_sample_fetch and begins writing to data->sample.raw
Without this change, the first byte written is actually to the dummy
byte which effectively gets tossed. The issue is that this is the
GYR_X<7:0>(LSB) according to the BMI160 data sheet. When we later call
either bmi160_gyr_channel_get or bmi160_acc_channel_get we're looking
at sample.gyr and sample.acc (which is effectively shiften by 1 byte).
This change gets rid of the dummy byte which re-alignes gyr with the
start of the raw buffer.
Signed-off-by: Yuval Peress <peress@chromium.org>
Verify if block tranfer is used and not an initial block when skipping
directly to data processing during FW update in PUSH mode.
This fixes a bug, which caused TLV not to be processed when the FW
object was updated as a whole, and actual resource number was encoded in
a TLV (for instance when writing FW Update URI).
Fixes#30135
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When ctr_drbg_initialize fails the function returns without unlock irq
that was previously locked.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
entropy_get_entropy return is not being checked what may result in a
vulnerability because tc_ctr_prng_reseed will not get proper entropy
data.
Fixes#29869
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rework the bootstrap DELETE operation, to support deletion of multiple
resources.
Current implementation had several oversimplifications, making it not
spec-compliant:
* DELETE `/` removed only Security object instances (!= 0)
* DELETE `/x` was handled as DELETE `/x/0`, therefore not removing all
of the object instances.
Since the above is only supported during bootstrap and not regular
Device management, this functionality was implemented in the
`bootstrap_delete` function, which now will be called for all DELETE
operations initiated during bootstrap. The regular LwM2M DELETE handler
will only be called during regular Device management, as it has more
strict limitations on what can be deleted.
Additionally, handle empty URI Path option as `/`, therefore indicating
deletion of all resources.
Fixes#29964
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
We did not check that user has supplied network interface index
in "net stats iface <idx>" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Updated the documantation with newly added configuration features.
Added information where to find minimal shell config file.
Added information how to activate particular features.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The help command is needed to list all available commands
when it is not possible to use the tab key.
Previously when build-in commands were deactivated command
help was not compiled as well.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Added IS_ENABLED(CONFIG_SHELL_CMDS_SELECT) to remove a dead code.
Added static inline function that returns pointer to the selected
command.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When history feature is not compiled in it makes no sense to
trim the command. In addition when history feature is not active the
shell will not call function history_put.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Put infrastructure for the following HCI commands/events in place:
* LE Read ISO Link Quality command
* LE Read ISO TX Sync command
* LE Set Host Feature Command
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Since first poll request send by lpn use friend security
credentials, so, friend nodes should be able to decrypt with
friend security, even if they have not yet established a friendship.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
When friend node key refresh phase to stage_1, there
are need to add friend update message to friend queue,
but, when friend KR phase to stage_2, must add friend
update to queue.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Friend node cache segment message for lpn, message with
sequence number can't change, since could cause lpn replay
attack.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Fix field names of bt_hci_cp_le_setup_iso_path in le_setup_iso_path to
make CIS central/periphal compile and adjust parameter names for
ll_setup_iso_path accordingly.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
A single-shot ticker in requested state beyond the elapsed
duration or skipped due to collision shall generate an
operation callback with failure status.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In the case where a BLE connection ticker node collides and does not
trigger a callback to ULL, and at the same time the same node receives a
ticker update request, the update causes the node to be scheduled for
execution a second time. This has the consequence of event_counter going
out of sync, and BLE connection is ultimately lost.
The solution is to mark collsions and re-scheduled nodes as expired, and
use the increased lazy count to identify its state instead of req/ack.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Implement HCI commands to read information about supported codecs and
controller delay.
* Read Local Supported Codecs command (v1 and v2)
* Read Local Supported Codec Capabilities command
* Read Local Supported Controller Delay command
The following functions are implemented as "weak" symbols and should
be overridden to fill in vendor-specific information into the above
commands.
* hci_vendor_read_std_codecs
* hci_vendor_read_vs_codecs
* hci_vendor_read_codec_capabilities
* hci_vendor_read_ctlr_delay
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Add defines and structs for reading information about supported codes,
codec capabilities and controller delays. Return parameter structs for
commands that return multiple variable-length fields only model the
fixed-length fields to minimize inconsistencies.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Legacy functionality in ull_conn will force scheduling of a connection
which has missed an anchor point due to lost RX. This kicks in either
for previously skipped events (latenzy_event != 0) or at random
depending on the randomness of the AA bit pattern.
This behavior is good at ensuring that a connection with errors or
aborted RX gets prioitized, and helps break locked round-robin
patterns with lost sync, but it also breaks the predictability of
the round-robin ticker scheduling.
With "must_expire" enabled, this feature also kicks in for scheduling
collisions, which may not be desirable.
This commit adds a configuration flag, BT_CTLR_CONN_RANDOM_FORCE, which
is default enabled (legacy behavior).
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix missing initialization of periodic interval value in
advertising report info structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Clarify that the acl_data struct includes the bt_buf type as the
first variable in the user data struct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor out implementation of functions defined in buf.h to its own
source file buf.c
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add implementation of HCI_LE_Set_Connection_CTE_Transmit_Parameters
for Bluetooth 5.1 Direction Finding.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add separated Kconfig file for Bluetooth 5.1 Direction Finding.
Enable controller support for:
- transmission of CTE
- 2us antenna switching
- 1us antenna switching
if build for nRF52833 SOC.
Add HAS_HW_NRF_RADIO_BLE_DF to nrf52833 SOC configuration.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add partial implementation for handling Bluetooth 5.1 Direction
Finding HCI command HCI_LE_Read_Antenna_Information to controller
Upper Link layer.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add Bluetooth 5.1 Direction Finding HCI command:
HCI_LE_Read_Antenna_Information handling to Host.
Add wrapper function to handle send the command
and receive response from Controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Adds a cli_reset to mod_sub if no status response was requested. This
adds a non-blocking mode to the mod_sub calls, matching the behavior of
other cfg_cli functions.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Missing copy net_idx to ctx, this cause tx subnet not found
or different with rx subnet, when rx subnet net_idx not zero.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Nothing in the API description the delayed work structure sanctions
direct reference to internal fields. Do not assume that a delayed
work item can be submitted without delay by invoking k_work_submit()
with a reference to the contained work item. Instead submit with the
delayed API and no wait.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Debug messages used the address of a member of the work_q structure as
an identifier; that field is not public API, so replace it with the
address of the work queue itself.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Fix node rx buffer leak if extended advertising and/or
periodic sync reports are masked out by the host.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added code comments to explain the reasons to drop
incomplete advertising and sync report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Report generation that skipped
population of AD data when there was no extended header.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use a common function to get the thread name.
There was no necessity in keeping sys_trace_thread_info() inline,
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Enables optionally placing Segger RTT and SystemView data in the DTCM
linker section instead of the default data section. This is needed on
SoCs in the i.MX RT series that use cacheable external SDRAM to store
data.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Set the RX/TX thread priorities so that if cooperative priorities
are used, then lowest priority thread will have priority -1 which
is the lowest cooperative priority. The higest net thread priority
will depend on number of traffic classes but with max value 8,
the highest priority will be -8.
If preemptive priorities are used, then highest priority thread
will have priority 0, which is the highest preemptive priority.
In this case, the lowest thread priority will be 7 if there are
8 traffic classes.
The motivation for this change is that for cooperative priorities
we want to let other cooperative priority threads to run before
networking. But if preemptive priorities are used, we want
networking threads to run reasonably often compared to other
preemptive priority threads.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If networking pre-emptive thread priorities are enabled,
then use the proper macro to enable them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Let user to decide whether the RX/TX threads are run in either
co-operative or pre-emptive thread priority.
Default is co-operative threading.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Put infrastructure for the following HCI commands/events in place:
* LE Setup ISO Data Path command
* LE Remove ISO Data Path command
* Configure Data Path command
* LE Set CIG Parameters Test command
* LE ISO Read Test Counters command
* LE ISO Receive Test command
* LE ISO Test End command
* LE ISO Transmit Test command
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Periodic Advertising Set Info Transfer depends on Extended
Advertising and connections hence enclose the LE Periodic
Advertising Set Info Sync Transfer implementation inside
CONFIG_BT_PER_ADV and CONFIG_BT_CONN conditional
compilation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Periodic Advertising Sync Transfer depends on connections
hence enclose the LE Periodic Advertising Sync Transfer
Received Event code inside CONFIG_BT_CONN conditional
compilation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Because unoconnected stream socket doesn't have any chance to receive
any data, so a blocking recv() would hang forever on it (and does
without this change).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If a read is requested without a read buffer, the emulator currently
crashes. Fix this by adding a check.
Fixes: #29703Fixes: #29702Fixes: #29017Fixes: #29016
Signed-off-by: Simon Glass <sjg@chromium.org>
Fix the debug key-set comparison for debug keys comparing the
generated key in big-endian format against the debug private
key in little-endian format.
Fix this by converting the private key to big-endian format for
convenience.
Use the _be suffix for all variables to make the mixing of the
endian formats easier to read.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Two ull_adv_sync function declarations, ull_adv_sync_reset and
ull_adv_sync_init was guarded by a #if causing CI issues.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The same code block for marking an object with
ull_disable_mark, stopping the ticker and then unmarking
the object appeared multiple places; often with a regression
bug where instead of unmarking it in case of error, it would
be "remarked".
This commit fixes the bug, and moves the functionality to
a common function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
* Add RCP library.
* Conditionally remove non required libraries not required for RCP.
* Drop :option: marker for CONFIG_OPENTHREAD_NCP_SPINEL_ON_UART_ACM
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Wrong use of function `find_msb_set(~link.rx.seg)`,
uint8_t type is implicitly converted to uint32_t.
As a result, it always returns 32 instead of the
expected value, resulting in abnormal processing
of prov segment.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The structure pointer was wrongly cleared before,
`bearer` and `role` in `bt_mesh_prov_link` structure
resulting in illegal pointer access.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
When kr phase to `BT_MESH_KEY_REVOKED`, should also call beacon
authentication, since beacon flag has change(0x01-->0x00).
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
DIS module builts fine when BT_DIS_SETTINGS is selected, but SETTINGS is
not. However no settings handlers are executed, just like with
BT_DIS_SETTINGS disabled, which might confuse user.
Select SETTINGS, so settings handlers are properly selected and executed
in runtime.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Currently BT_DIS_SETTINGS and BT_SETTINGS are independent in
Kconfig. This seems fine, because BT_SETTINGS pulls a lot of
functionality, which is not really needed to implement DIS with values
configured in runtime (from settings subsystem).
Drop BT_SETTINGS conditional compilation and leave check on
BT_DIS_SETTINGS only.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
subpress warnings from llvm:
warning: absolute value function 'abs' given an argument of type
'int64_t' (aka 'long long') but has parameter of type 'int' which may
cause truncation of value [-Wabsolute-value]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updated the GCOV_COUNTERS value, without which the coverage data
was corrupted when gcc 10.2 was used.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a macro in public header that represents maximum hostname string
length without terminating NULL character. This will allow other
modules, such as offloaded network drivers, to know how much space is
needed to allocate in order to fit whole hostname.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This platform had separate backends for the log subsystem and printk
handler, which was silly. Unify them to use the same backend so they
don't clobber each other.
This patch appears to be a lot of lines, but it's really mostly code
motion and renaming.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In architectures supporting more than 8 WL entries, e.g. pure
software implementations, it is desirable to be able to increase the
WL size. This change increases the range to 1..16 for SOCs other than
nRF5x and OpenISA.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix sanitycheck failures when building
samples/bluetooth/peripheral_hr for rv32m1_vega_ri5cy
platform.
Updates from nRF platform related to 255 byte AD data
support have been directly copied into openisa port to
fix build failures.
Relates to commit c2fc629dd2 ("Bluetooth: controller:
255 byte AD payload support").
Fixes#29967.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Allow vendor specific increase of user operation capacity for
THREAD, to support queuing additional ticker operations.
Relocate TICKER_USER_<XXX>_VENDOR_OPS to before TICKER_USER_<XXX>_OPS.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
ZLP - zero length packet is used to indicate that the device
has no more data to send. If the Host asks for more data that the
device can provide and the data size is mutliplication of Endpoint
wMaxPacketSize then the device must terminate the data transfer
with ZLP.
Until this patch Nordic device driver controller was not aware of
the requested data length and could not determine when the ZLP was
required.
This patch introduces a fix that prevents the driver from starting
setup stage before the ZLP is being send.
For consistance with the Zephyr USB stack sending ZLP must be
issued from the stack level. Making trans_zlp flag true results
in blocking the driver from starting setup stage without required
ZLP.
After the data transfer finishes the driver will be prepared for ZLP
and will call back the stack to start writing ZLP. After the ZLP
is being send the driver will automatically start status stage and
end the Control Transfer.
This patch also removes CONFIG_USB_DEVICE_DISABLE_ZLP_EPIN_HANDLING
and aligns Nordic driver with others.
Without this patch the issue could occur when handling get requests.
Typical case is string descriptor of length equal to wMaxPacketSize.
Hosts usually asks for wLength = 255 Bytes when string descriptors
are being requested. In that case to successfully finish the data
stage of the Control transfer the device must send wMacPacketSize
Bytes of actual string descriptor and then ZLP to indicate that no
more data are present. After ZLP the status stage may start and the
request is finished successfully.
Without this patch the driver will not send ZLP making it unable
to end the Control Request successful - this may lead to failing
'Device Descriptor Test' from USB3CV test tool.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Add STP transport support for MIPI SyS-T with Kconfig MIPI_SYST_STP,
this is following SyS-T spec Section 7.
And with Kconfig MIPI_SYST_RAW_DATA, add raw data output support for
MIPI SyS-T protocol stack.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Fix regression in connection radio event close in central
role introduced in commit 222dca5598Fixes#29957.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Module was using flash driver implementation API call
`page_layout()` which is part driver implementation
interface API.
This patch re-implement this part of code using
`flash_page_foreach()` public API function.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Change adds missing TX power dependencies. nRF52833 and nRF52820 SoCs
also support higher TX power values.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
A cast made assumption on how data is stored.
This commit makes the following test pass on qemu_leon3:
- net.udp
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
A cast made assumption on how data is stored.
This commit makes the following test pass on qemu_leon3:
- net.ipv6.fragment
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Following errors occuring after enabling debug logs:
log: argument 2 in source net_hostname log message "%s: (%s): \
Hostname set to %s" missinglog_strdup().
log: argument 2 in source net_hostname log message "%s: (%s): \
New hostname %s" missinglog_strdup().
Fix that by printing CONFIG_NET_HOSTNAME directly in the first case and
using log_strdup() in the second.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Adds support for using the periodic advertiser list.
This list allows the application to rely on specific
devices when creating periodic advertising syncs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If user has enabled TCP debugging, print detailed internal TCP2
information too when user gives "net conn" command. This is useful
to have when debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Comment out TCP1 specific stuff when TCP2 is enabled. This means
shuffling the code around a bit so that common code is placed at
the end. Introduce also net_tcp_foreach() function to TCP2 so that
it can be used from net-shell.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adds support for the periodic advertising sync transfer
(PAST) feature, which allows a synced device, or an
advertiser, to transfer synchronization of a periodic
advertising train to a connected device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The FCB has been strongly tied to 0xff erased flash devices and this
commit adds support for other erase values.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The data length is already calculated in tcp_in() so no need
to do it again in tcp_data_get(). Just pass the length to the
tcp_data_get() function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit provides the timestamp_serialize() define for the SPARC
architecture.
Co-authored-by: Nikolaus Huber <nikolaus.huber.melk@gmail.com>
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
This adds the pieces needed for openocd.c to compile when ARCH=SPARC.
In particular, it allows the tracing.osawareness.openocd sample to
build and run.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Fix use of deprecated scan parameter filter_dup.
Should have been changed to options as part of:
be57dfbe2a
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Kconfig USB_DFU_WAIT_DELAY_MS was hidden.
Added prompt for it so it can be configured.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Use rather MCUBoot implementation of some function than
zephyr's implementations once avielabel.
Zephyr implementations are needed while compiling application
supposed to be chainloaded by the MCUBoot or when they are
tested.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
It is possible that USB DFU class is used by MCUBoot
itself while it has enabled CONFIG_SINGLE_APPLICATIO_SLOT.
In this mode only application slot is the primary slot.
Adapted DFU class descriptor and services to optionally
serve only for one image.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
It is possible that dfu libraries are used by MCUBoot
itself while it has enabled CONFIG_SINGLE_APPLICATIO_SLOT.
In this mode only application slot is the primary slot.
Patch is required for supports USB DFU class in mentioned
MCUBoot's mode.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
When calculating the size of unused interrupt stacks on SMP,
the "unused" variable is not cleared between CPUs. So this
value keeps incrementing and does not reflect actual unused
size for CPUs other than the first one. So clear the "unused"
variable for each CPU.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This reverts commit e812ee6c21.
This is the initial step towards replacing the core Zephyr formatting
infrastructure with a common functionally-complete solution.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
pdu->len is only 8 bits and CONFIG_BT_CTLR_ADV_DATA_LEN_MAX
can be upto 1650 bytes. Fix the implementation to use 16
bit auto variable to check AD data length overflow.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Data population when there is no
Extended Header to be filled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
.../ll_sw/nordic/lll/lll_scan.c: In function 'isr_tx':
.../ll_sw/nordic/lll/lll_scan.c:483:19: error: unused variable 'lll'
[-Werror=unused-variable]
483 | struct lll_scan *lll = param;
| ^~~
cc1: all warnings being treated as errors
This fixes https://github.com/zephyrproject-rtos/zephyr/issues/29968.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Since the tracing of thread being switched in/out has the same
instrumentation points, we can roll the tracing function calls
into the one for thread stats gathering functions.
This avoids duplicating code to call another function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We should not be initializing/starting/stoping timing functions
multiple times. So this changes how the timing functions are
structured to allow only one initialization, only start when
stopped, and only stop when started.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If rand32_xoroshiro128::z_impl_sys_rand_get is called with outlen
not divisible by 4, it will overflow the dst buffer. This happens
because blocksize is not changed from 4 to the difference between
outlen and len. If outlen is < 4, z_impl_sys_rand_get will be stuck
in an infinite loop that keeps writing random bytes outside the buffer.
If outlen is > 4, z_impl_sys_rand_get returns after the correct number
of loops, but it writes every byte to the buffer, not just outlen number
of bytes. This causes the buffer to be overflowed with up to and
including 3 bytes.
Signed-off-by: Didrik Rokhaug <didrik.rokhaug@gmail.com>
Since ADV_EXT_IND is received on primary channel, the AR is configured
to resolve AdvA in legacy PDU (assuming on 1M) and it will not resolve
AdvA properly. In such case, we should resolve AdvA manually in LLL.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This allows to synchronously resolve any address using AAR. The AAR
has to be configured prior to calling this function.
The intended use for this function is to resolve AdvA in a PDU on
primary channel when AR was configured for different PDU type. That
means AR was configured to resolve in legacy PDU, but extended PDU
was received and we need to resolve AdvA manually. In such case, AAR
is already configured so just need to trigger it again with proper
ADDRPTR.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This patch allows to configure AR for resolving AdvA in extended adv
PDUs. The extra 'flags' field provides a hint from caller on how to
setup AR:
- if legacy PDU is expected, AdvA is set after PDU header,
- if extended PDU is expected, AdvA is set with +2B offset due to
common extended advertising header,
- if Coded PHY is used, AdvA is set with extra +5b offset due to CI and
TERM1 fields.
Note that AUX_SCAN_REQ and AUX_CONNECT_REQ are also considered legacy
PDUs here since they are exactly the same as SCAN_REQ and CONNECT_IND.
If neither legacy nor extended PDU is specified, it's derived from PHY,
i.e. 1M means legacy, non-1M means extended. Since it is still possible
to receive different type PDU in such case, it's up to LLL to detect
this and resolve AdvA when RX is done.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Instead of guarding the NODE_RX_TYPE_USER cases with
CONFIG_BT_CTLR_USER_EXT we guard them with
CONFIG_BT_CTLR_USER_EVT_RANGE > 0 as that is the actual value that
enables/disables the NODE_RX_TYPE_USER values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of having explicit values for each entry in the enum that
has to be updated for each new entry (thus requiring manual work
which can also be error-prone), the enum will now be
self-incrementing, to make it easier and safer to add new
entries.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Removed the #ifdef's for the node_rx_type enum. Since the
savings, they just make the enum harder to read.
Furthermore it will also ensure that all the enum values
will have the same value once the enum entries are no
longer manually defined.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
lll->conn is only defined valid when BT_CENTRAL is enabled.
Also ull_sched_mfy_after_mstr_offset_get is only used when BT_CENTRAL
is enabled.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Adds check for TTL max in the transport send functions, and moves
setting of default TTL to transport.
Fixes#29855.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Change the advertising option that controls if the directed advertiser
will use an RPA or the identity address of the peer for the initiator
address.
This option currently has two issues:
- It behaves differently if the privacy feature has been enabled,
which can be confusing for application to use.
- It cannot start a directed advertiser towards a peer that is not
privacy-enabled and has distributed an IRK.
This commit includes the following changes:
- When privacy has been enabled in order to advertise towards a
privacy-enabled peer the BT_LE_ADV_OPT_DIR_ADDR_RPA option must now
be set (same as when privacy has been disabled).
- It is now possible to start a directed advertiser using the identity
address of the peer when privacy-enabled.
- When privacy has been enabled the advertising option combination
of using the local identity address and an RPA as the initiator
address is now disallowed and will return an error code.
This is done because this combination did not actually work and would
have used the identity address of the peer instead.
- If the controller does not support controller-based privacy then
using the option BT_LE_ADV_OPT_DIR_ADDR_RPA will return ENOTSUP
because this behavior cannot be done with host-based privacy.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Host can discard scan response data by setting empty data. We simply
set PDU length to 0 to indicate this, it will make future check easier.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Align the PDU buffer reference in struct node_rx_pdu so that
node rx type specific parameters, like, terminate and sync
lost reason can be accessed without any memory alignment
issues.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This configuration is be required to enable the shell management
command handler supported by the core mcumgr library
Signed-off-by: Brian Bradley <brian.bradley.p@gmail.com>
Fix maximum Advertising Channel PDU payload size calculation
by including the Common Extended Advertising Payload Format
overload alongwith the AD data maximum size supported.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation using mfifo to return stale AD data PDU
from LLL to Thread context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Kconfig option to configure maximum number of buffered
AD data PDUs across enabled advertising sets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is a step towards phasing out DEVICE_INIT and just having
DEVICE_DEFINE. To make it a little easier on users or DEVICE_DEFINE
if they don't care about PM, they can just pass NULL for the
pm_control_fn paramater.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Put infrastructure for the following HCI commands/events in place:
* LE Set CIG Parameters command
* LE Remove CIG command
* LE Create CIS command
* LE Accept CIS Request command
* LE Reject CIS Request command
* LE CIS Established event
* LE CIS Request event
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Adds a `destroy` callback to the `struct bt_gatt_indicate_params` which
is used to signify to the application that the indication operation has
completed and the struct instance can be freed/destroyed.
This is required as the number of indication value callbacks that will
be triggered is not known by the caller when the `conn` parameter is
`NULL`.
Tracking when this callback should be run is mananged by a private
reference counter inside the struct.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the signature of the `bt_gatt_indicate_func_t` callback type by
replacing the attr pointer with a pointer to the
`bt_gatt_indicate_params` struct that was used to start the indication.
This allows the callback to free the `bt_gatt_indicate_params` instance
if it was allocated from storage, while still allowing the
`bt_gatt_attr` value to be accessed through `params->attr`.
Allocating the `bt_gatt_indicate_params` instance from storage is
desirable as multiple indications can be queued, however each instance
must be valid until the callback is run.
Implements API update from #29357
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This change enables support for DNS service discovery
(RFC 6763) in the mdns_responder service and sample app.
Fixes#29429
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This change adds support for DNS Service Discovery (DNS-SD)
as described in RFC 6763.
Fixes#29099
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This change adds net_context_port_in_use(), which is a simple
wrapper around net_context_check_port() and is used to check
if a particular socket is bound to a given IP address.
Fixes#29649
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Allow application to enable L2CAP dynamic channels without support
for Enhanced Credit Based Flow Control (CBFC).
Since these are separate features in the qualification it should
be possible to qualify L2CAP connection oriented channels without
also having to qualify L2CAP enhanced credit based flow control.
The L2CAP/LE/REJ/BI-02-C conformance test will fail when enhanced CBFC
has not been selected in the ICS.
The lower tester expects that since the Enhanced CBFC is not supported,
the command L2CAP_CREDIT_BASED_CONNECTION_REQ should be met with an
L2CAP_COMMAND_REJECT_RSP and not an L2CAP_CREDIT_BASED_CONNECTION_RSP.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Encapsulates the Heartbeat state and functionality in a separate
heartbeat module, removing all manipulation of the heartbeat state from
the transport and config server modules.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
according to the comment "all if no modules specified"
to support "all" state, set to 1 number of parameters.
Signed-off-by: Ehud Naim <ehudn@marvell.com>
Adds various tests for mounting ELM FAT FS with FS_MOUNT_FLAG_NO_FORMAT
and FS_MOUNT_FLAG_READ_ONLY, and operations on read-only mounted
file system.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adds various tests for mounting LittleFS with FS_MOUNT_FLAG_NO_FORMAT
and FS_MOUNT_FLAG_READ_ONLY, and operations on read-only mounted
file system.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The flags field has been added to fs_mount_t structure, accompanied
with two new flags:
FS_MOUNT_FLAG_READ_ONLY -- mount fs as read only
FS_MOUNT_FLAG_NO_FORMAT -- do not format volume when system not found
Code supporting the flags has been added to FS layer and drivers for
LittleFS and FAT FS.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds FS_FATFS_READ_ONLY Kconfig option; the option, when
selected, excludes write supporting code within ELM FAT driver.
When write support to FAT FS volumes is not desired, this option may be
selected to slightly reduce code size.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds FS_FAFTFS_MKFS Kconfig option; the option, y by default,
allows to include mkfs supporting code, within fs_mount callback,
for ELM FAT file system driver.
When formatting of FAT FS volumes is not desired, this option may be
deselected to slightly reduce code size.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Do not send the original pkt in 6lo based networks as in those
the IPv6 header is mangled and we would not be able to do any
resends of the original pkt. So for 6lo networks, clone the
pkt and send it to peer. The original pkt is kept in sent list
in case we need to resend to peer.
Fixes#29771
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Track the number of dropped TCP data segments and number of dropped
TCP packets in network statistics. It is useful to see these
numbers separately.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add a simple backoff mechanism between consecutive registration attempts
in case of registration failures. Finally, notify the application in
case the registration failed several times.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Refactor the boostrap regstration procedure, by splitting the message
creation and sending into a separate function, in similar manner as
it's done with regular registration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, when socket errors occur during receive, the LwM2M engine
restarts the state machine and registers again to the server. While this
works in simple use case (only RD client socket open), it's not a valid
approach when more sockets are open (FW update socket).
Fix this by introducing socket fault callback, which is registered by
the LwM2M engine users. This way, a proper socket owner is notified on
error and can pertake appropriate action.
For RD socket errors the behaviour remains the same - the state machine
is reset and the client registers again to the server. For FW update
socket, handle the error by reopening the socket and retransmitting the
last request. This allows to resume the download from the point the
error occured, w/o a need to start from scratch.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Places definition of lll under the ADV_EXT #ifdef in lll_adv.c:isr_tx,
to silence build warnings for non-AE builds.
Follow-up from #29753.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Call mbedtls_ssl_conf_max_frag_len() on created TLS context
configuration, so that Maximum Fragment Length (MFL) will be sent to
peer using RFC 6066 max_fragment_length extension. MFL value is
automatically chosen based on MBEDTLS_SSL_OUT_CONTENT_LEN and
MBEDTLS_SSL_IN_CONTENT_LEN mbed TLS macros.
This extension is mostly useful for TLS client side to tell TLS server
what is the maximum supported receive record length.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
We need to use actual phy wherever required to make sure radio delays
are calculated properly. This is especially important for LE Coded
since delays for that phy are significantly higher than on 1M and 2M.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
ull_adv_data_set() is only used for legacy advertising data (either via
legacy HCI command or as fallback for extended advertising set which
uses legacy PDUs) so there is no need to check for extended advertising.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We handle secondary channel only for extended advertising sets, that
means we always have ADV_EXT_IND on primary channel so there is no need
to support non-ext PDUs here.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Replaces all existing variants of value clamping with the MIN and MAX
macros with the CLAMP macro.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This commit corrects the maximum allowed amount of children to
match Thread specification.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The objects should be const-qualified for consistency with other uses,
including declarations in headers.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
If the peer ACKs data when it closes the connection, update
our sequence number accordinly. The connection would eventually
be terminated but this will avoid extra resends by the peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a connection is being closed, it is possible that the application
will have a lock to net_context and TCP2 connection lock. If we then
receive a final TCP2 ACK and close the connection, the locking order
get switched and TCP2 will first try to get its own lock and then the
net_context lock. This will lead to deadlock as the locking ordering
is now mixed.
The solution is to unref the TCP connection after releasing the
connection lock. The TCP connection unref function will anyway get the
lock so no need to do double locking.
Fixes#29444
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When building the osdsp control_panel sample we get the following
compile error:
subsys/mgmt/osdp/src/osdp_cp.c:993:10: error: implicit declaration of
function 'osdp_cp_send_command_keyset'
Fix by adding ifdef protection around the call to
osdp_cp_send_command_keyset
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If there are enough tls_context objects in the system (configured by
CONFIG_NET_SOCKETS_TLS_MAX_CONTEXTS), but there are not enough file
descriptors (configured by CONFIG_POSIX_MAX_FDS) to create underneath
TCP/UDP socket, then TLS socket creation fails with leaked tls_context.
Call tls_release() in ztls_socket() error path whenever underneath
TCP/UDP socket creation fails.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The power and chip detect gpios are optional device tree properties for
the nxp usdhc driver. Fixes a build error on the mm_swiftio board, which
does not set the power gpio property.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
According to LwM2M specfication v1.0.2, par. 5.3.2, the LwM2M client
MUST send an “Update” operation to the LwM2M Server whenever the
lifetime parameter of the Server object changes the server). The same
applies for the object instances created/deleted. The changes in objects
seem to already be handled, but the lifetime was not.
Additionally, the "Update" message shall only contain these parameters
which changed since the last update (including objects). As it's
straightforward to determine if the liftime changed but it's not easy
to tell if there were updates in the object instances, add an
additional parameter to the engine_trigger_update() function, indicating
that new object information shall be sent in the "Update" message.
Eventually add a proper error checking in `sm_send_registration` as the
function is reworked anyway.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The memset on firmware_ctx during PULL FW update initialization will
set the socket descriptor to a valid value of 0. This leads to an error
if parsing of the URI provided by the server fails, and the firware_ctx
is closed - the socket with a descriptor 0 will be accidently closed.
Fix this by invalidating the socket FD after the memset on
initialization.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It shouldn't be optional to handle separate response, as it's a
mandatory requirement according to the RFC7252:
"The protocol leaves the decision whether to
piggyback a response or not (i.e., send a separate response) to
the server. The client MUST be prepared to receive either."
Therefore, remove the flag as separate responses are handled now
properly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Separate response handling implemented in the engine was faulty. The
separate response was not acknowledged by the client, resulting in
spurious retransmissions from the server side.
Also, the pending CON message was retransmitted by the client even after
it was acknowledged by an empty ACK, but the respnse haven't arrived
yet. Fix this by adding a new `acknowledged` flag to the `lwm2m_message`
structure. Once acknowledged, the flag is set and the confirmable
message is no longer retransmitted. We keep the message on the pending
list in order to timeout properly in case separate response does not
arrive in time.
Finally, prevent the reply callback from being called twice in case
the response is transmitted separately from ACk. The callback should
only be called on the actual reply, not the empty ACK.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far this function existed as a static function in LwM2M PULL FOTA
module. Since such functionality will be needed in other places, make it
an internal API function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The decision to set aszmic = 1 in the net_tx structure was made after
the variable was passed to the crypto context, creating a discrepancy
between the two when aszmic is 1.
Extracts transport encryption to a separate function.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The commit changes run-time checks of file system driver's callbacks
pointers, against null, optional by replacing `if` with `CHECKIF` macro,
which means that they can be removed from compilation with Kconfig
option CONFIG_NO_RUNTIME_CHECKS.
Additionally the commit allows the same checks to fail hard, with
assertion, when CONFIG_ASSERT_ON_ERRORS option is selected.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The PA sync callbacks would have been registered for each new
PA sync, which would cause the callbacks to be called multiple times
if multiple PA syncs were created.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sync established event caused by a cancel by the host
was not properly handled. When cancelling the sync established
event is created, and the sync object should not be deleted
before that event is received.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Only set friend_cred to true when friendship established and
use friend cred security material decryption successfully.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Fixes bug where applications that disable model extensions end up in an
infinite loop, and adds support for walking model subtrees, as opposed
to forcing root to be unextended.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
End of DFU operation was signaled after the last usb dfu request was
received. Therefeore wait_for_usb_dfu() terminated so fast that
dfu_work_handler() was not called by k_work_queue befor.
wait_for_usb_dfu() should terminate after DFU operation was completed.
For fix that k_poll_signal_raise() was moved after the flash write
operation.
fixes#29611
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add generation of Advertising Set Terminated event on High
Duty Cycle Directed Advertising Timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reduce the use of ARG_UNUSED on auto variables and try to
use conditional compilation where appropriate.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The commit changes error handling by fs_unmount; the function will
return -EINVAL if mount point, described by mp, is not mounted or
-ENNOTSUP when unmounting is not supported by the driver; in the second
case it will also log error.
Additionally to the above changes, checks for correct mnt_path and
mnt_path, within fs_unmount, have been removed as they are not needed;
only the fs_mount_t->fs pointer is needed to decide whether system is
mounted or not.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit moves fs_mount parameter verification above mutex lock.
The list of mount points is now checked before attempting to obtain
file system API pointer.
All modifications to mount point data structure, given as a parameter
to the fs_mount, are only applied after every other operation needed
have completed successfully, immediately before adding the mount point
to the list of mount points.
The fs_mount will a warning when mounted file system does not support
unmount.
When a file system does not provide mount function, the -ENOTSUP error
will be returned instead of -EINVAL.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Added flash_area_erased_val() function for get value of erased
byte of memory which is under flash area.
This function already exist in MCUBoot and zephyr dfu subsystem
which makes simultaneous usage of both impossible.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
`bt_mesh_model_tree_walk()` was too simplistic and did not track visited
nodes which caused it to fall into infinite loop. Moreover the double
next jump could skip a level causing depth value to be invalid.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
../zephyrNew/subsys/bluetooth/mesh/prov.c: In function
'bt_mesh_prov_reset_state': ../zephyrNew/subsys/bluetooth/mesh
/prov.c:61:2⚠️ '__builtin_memset' offset [52, 292] from
the object at 'bt_mesh_prov_link' is out of the bounds of referenced
subobject 'dhkey' with type 'uint8_t[32]' {aka 'unsigned char[32]'}
at offset 19 [-Warray-bounds] 61 | memset(&bt_mesh_prov_link.dhkey, 0,
Fixes: #29634
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
If chan->conn is already NULL do not call bt_conn_unref as that will
likely cause a crash, also this make sure that if channel has been
disconnected using bt_iso_chan_disconnect it removes the channel from
connection list before setting the chan->conn to NULL.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Document and validate advertising parameters for the disallowed
advertising mode high duty cycle directed connectable advertising
using extended advertising PDUs.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix issue where the encrypt change has an error code, but the
encrypt change request was unrelated to the current ATT request.
This lead to the current ATT transaction being interpreted as finished
an the ATT client would proceed with the next ATT request, which would
fail since the ATT client is now violating the ATT single transaction
rule.
Updated similar if statement checking for the opposite to improve
readability.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Moves the virtual address labels to the transport layer, disconnecting
them from the configuration server.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
If low power node publish with unicast address other
than friend address, the friend node should relayed
this message to all network interface.
When Proxy feature enabled, message from gatt bearer should
relay to adv bearer even relay feature disabled.
Fixes: #29544
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Move the platform.h from the module to the zephyr tree. This file is
zephyr sepcific and belongs in the zephyr tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
using CONFIG_NET_BUF_POOL_USAGE monitor avail_count,
this variable should be protect.
Protecting it by using atomic variable
Signed-off-by: Ehud Naim <ehudn@marvell.com>
Currently all provisioning procedure into common source
files call `prov.c`, that will not compile separately.
Add `BT_MESH_NODE` to control whether nodes are supported
and device provisioning is supported, this will be used in
provisioner role.
Add more provisioner OOB authentication method.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
At present this driver only supports SPI. Refactor it so that SPI is
just one of the options. This does not change any functionality.
Signed-off-by: Simon Glass <sjg@chromium.org>
This emulator currently only supports SPI. Before making it also
support I2C, move it up a directory to avoid I2C uses missing it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move the logging for transactions to the functions that actually access
registers and sample data. This avoids needed to repeat this code when
I2C starts calling these functions.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update the language to refer to a bus instead of SPI. This will make it
more applicable with I2C support is added.
Signed-off-by: Simon Glass <sjg@chromium.org>
Some LWM2M backends/servers, such as emxq, expect the sequence numbers
to begin on 0.
This change is in line with how other lwm2m clients, such as Anjay and
Wakama, starts the notification sequence.
Signed-off-by: Viktor Sjölind <viktor.sjolind@endian.se>
Fix arguments unused when not enabling Extended Scanning
which was introduced in
commit 0cef1e43c9 ("Bluetooth: controller: Extended
Scanning Coded PHY duration and period").
Fixes#29442.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The commit 93e5181f ("net: context: Add locking for concurrent
access") added net_context locking to only IPv4 sockets.
That is not enough and we need locking also to other supported
socket address families like IPv6, SocketCAN and packet socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix application conn param update submitted before the timeout of
CONFIG_BT_CONN_PARAM_UPDATE has expired being ignored when
CONFIG_BT_GAP_AUTO_UPDATE_CONN_PARAMS=n.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename the update_work handler to deferred_work since this handler
is being multiplexed for different kinds of deferred work, not just
updating the connection parameters.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move auto-initiation of the peripheral connection parameter update,
this handling would only submit the delayed work with the timeout once
all other auto initiated procedures had completed. This behavior means
that the delay would not be set on when the connection was established
but instead relative to the previous procedures.
Based on the connection interval used, the instant(s) used, and the
number of auto procedures this delay becomes indeterminate.
Submit the work once connected, the constraint that existed in the
zephyr link layer earlier about requesting only one control procedure
at a time has been removed.
This also brings all the handling of the timeout work to the connection
state handling, which makes it easier to track this behavior in code.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Document the behavior of the bt_conn_le_conn_update API when the
local device is the peripheral role.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Prior to this commit, the LwM2M stack would TLV-encode integers
depending on their internal storage size. An integer with value 5 stored
in an int8_t would be encoded with length 1, but an integer stored in an
int32_t would be encoded as "00 00 00 05" with length 4.
This commit checks if the value is castable to a smaller int and encodes
it as such if so. This is cascading, so even a 64 bit integer with value
5 will be encoded with length 1.
Note that this does not seem to be required by the specification, but
this is how Anjay and the other LwM2M stack seem to do it.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Add Queue Size and Receive Window information to lpn
callback function to notify upper layer to determine
currently friend node information, which may be used
in future.
Add Callback structure to notification application which friendship
has been changed.
Add function `bt_mesh_friend_terminate` let's app layer determine
terminate friendship manually.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Fix ifdef in command inclusion, in practice this meant that
CONFIG_BT_LL_SW_SPLIT and CONFIG_BT_CTLR_ADV_EXT switched meaning.
Added blank lines so that the commands in shell/ll.c are more
easily visible as group.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The struct fs_file_system_t is only useful when defining file system
drivers and is not required for typical application development,
that is why it has been moved to separate file fs_sys.h.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
When we are sending ICMPv6 error message, we need to store the
link local addresses of the received packet somewhere in order
to know where to send the new error message.
Easiest is to store the ll addresses is to the error message
itself, just before where the sent packet will start in memory.
We cannot use the original pkt to store the ll addresses
as that packet might get overwritten if we receive lot of packets.
Fixes#29398
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Introduce a support kconfig for controller ECDH command support.
Default to host ECDH emulation in combined host controller build
where the controller does not support these commands.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is a major refactoring of the handling of the cryptographic
material of both the network and transport layers. The aim is to
encapsulate the key object manipulation, and improve overall modularity.
Pulls Applications and Subnets out of the bt_mesh and into separate
modules, with static storage types on the data. This has several
side-effects:
- The Config Server no longer operates directly on the bt_mesh.subs and
bt_mesh.apps lists, but goes through a public configuration interface,
following the pattern set in #27908.
- All iteration through the keys is done through iteration APIs
- Key resolution on RX and TX is centralized.
- Changes to the keys triggers events the other modules can register
handlers for.
- Friendship credentials are stored in the lpn and friend structures.
Part of #27842.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This makes it possible to pass different byte arrays to gatt write
making it usable to test attributes that take more than a single byte.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This prevents any work to be submitted until the stack is initialized
thus avoiding pointless hash generation, etc, while initializing the
system.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adds support for enabling/disabling PA sync receive,
which allows applications to control when to receive data
while a sync is established.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If an ACL connection is disconnected while there is an ISO connection
associated with it the ACL connection will not be cleanup properly as
the code attempt to cleanup the ISO connection and breaks without
proceeding to cleanup the ACL as well.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The callbacks has been moved from being local to each
bt_le_per_adv_sync object, to being global. The
removal of the pointer in bt_le_per_adv_sync was
missing from that update.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix shell build errors when building with combined host and controller
but the selected controller is not the in-tree zephyr controller, i.e
CONFIG_BT_CTLR=y, CONFIG_BT_LL_SW_SPLIT=n and cmd_scanx and others
are not defined.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Currently, there is a case for net_config_init function that for
timeout==0 and when iface is already up, the ip setup is not proceed
and the error message "Timeout while waiting network..." is logged.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Adds the socket option TLS_ALPN_LIST for SOL_TLS sockets
Passes the configured alpn list to the mbedtls config
on mbedtls init
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
If we are sending data directly, we already have TCP lock so
there is no need to do any locking. But when data is re-sent,
the work queue handler is doing the sending so we need to lock
the TCP connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When receiving data that needs to be passed the data to application,
queue it for short time so that we do not have TCP connection lock
held. This way if the application wants to send data, there is no
possibility that the connection lock would prevent sending data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Release the context lock before passing data to the application
socket as that might cause deadlock if the application is run
before the RX thread and it starts to send data and if the RX
thread is never able to run (because of priorities etc).
Fixes#29347
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When waiting for data from CP, the data timeout check must happen before
no-data check. If not, a partial packet may endlessly hold PD in
"wait-for-data" state, while the PD keeps reporting status as online
till another packet is received.
Fix this my moving no-data check below the timeout check.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
All OSDP packets must start with a mark byte (0xFF) followed by a Start
of Message byte (0x53). Skip all bytes received until such a sequence is
seen to to avoid waking up the refresh thread needlessly.
Also, refactor osdp_uart_isr() to reduce number of local variables.
Fixes: #28168 Coverity-ID: 214218
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Minimize number of exported methods by unifying all osdp_cp_send_cmd_*()
as osdp_cp_send_command().
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Exported header oftenly used when creating a logging
backend that inpects the log 'stream'.
Enables use in external Zephyr modules implementing the
logging backend interface.
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
These defines are leftover of old platform settings implementation
and are not used any more.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Use conversion macros to convert Extended Scan duration and
period to radio event counts.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to support simultaneous 1M and Coded
PHY Extended Scanning duration and period. Also, added
implementation to support update to duration and period of
an active scanning instance.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the ll_scan_enable interface signature, place duration
before period parameter to reflect the order as in the HCI
LE Set Extended Scan Enable command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix scan done to be generated when the window is closed
both under abort and graceful window close.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the implementation to set scanning channel to
isr_window function where the next window is started,
instead of being at the abort of the previous continuous
window.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix scanning state and is_adv_ind flags to be common to both
isr_done and isr_window code path.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactoring of conditional compilation related to extended
scanning with duration and period.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rework implementation handling the disable and the error
handling when failure to start Periodic Advertising
instance.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix incorrect use of unint32_t instead of a sufficient
uint8_t for the returned HCI error code.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Decouple updates to primary and secondary AD Data PDU such
that primary PDU changes can be committed on successful
scheduling of secondary PDU radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Significant rework of the Intel Audio DSP SoC/board layers. Includes
code from the following upstream commits:
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Thu Jun 25 16:34:36 2020 +0100
xtesna: adsp: use 50k ticks per sec for audio
Audio needs high resolution scheduling so schedule to nearest 20uS.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 24 13:59:01 2020 -0700
soc/xtensa/intel_adsp: Remove sof-config.h includes
This header isn't used any more, and in any case shouldn't be included
by SoC-layer Zephyr headers that need to be able to build without SOF.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Sat Jun 20 15:42:58 2020 -0700
soc/intel_adsp: Leave interrupts disabled at MP startup
This had some code that was pasted in from esp32 that was inexplicably
enabling interrupts when starting an auxiliary CPU. The original
intent was that the resulting key would be passed down to the OS, but
that's a legacy SMP mechanism and unused. What it actually did was
SET the resulting value in PS.INTLEVEL, enabling interrupts globally
before the CPU is ready to handle them.
Just remove. The system doesn't need to enable interrupts until the
entrance to the first user thread on this CPU, which will do it
automatically as part of the context switch.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 13:57:54 2020 +0300
dts: intel_cavs: Add required label
Add required label fixing build for CAVS15, 20, 25.
Fixes following errors:
...
devicetree error: 'label' is marked as required in 'properties:' in
bindings/interrupt-controller/intel,cavs-intc.yaml,
but does not appear in
...
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 15:19:56 2020 +0300
soc: cavs_v18: Remove dts_fixup and fix build
Remove unused now dts_fixup.h and fix build with the recent code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 15:12:25 2020 +0300
soc: cavs_v20: Remove dts_fixup and fix build
Remove unused now dts_fixup.h and fix build with the recent code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 23 14:59:23 2020 +0300
soc: cavs_v25: Remove dts_fixup fix build
Remove unused now dts_fixup and fix build with the latest code base.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:29:06 2020 +0300
soc: intel_adsp: Remove unused functions
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 17:53:58 2020 +0300
soc: intel_adsp: Clean up soc.h
Remove unused or duplicated definitions.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 17:02:23 2020 +0300
soc: intel_adsp: De-duplicate soc.h
Move soc.h to common SOC area.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:54:19 2020 +0300
soc: intel_adsp: Remove duplicated io.h
Move duplicated io.h to common SOC area.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:39:46 2020 +0300
cmake: Correct SOC_SERIES name for byt and bdw
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 12 12:39:02 2020 +0300
soc: intel_adsp: Build bootloader only for specific SOCs
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Thu Jun 11 13:46:25 2020 +0100
boards: xtensa: adsp: add byt and bdw boards WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 10 10:01:29 2020 -0700
soc/intel_adsp: Make the HDA timer the default always
The CAVS_TIMER was originally written because the CCOUNT values are
skewed between SMP CPUs, so it's the default when SMP=y. But really
it should be the default always, the 19.2 MHz timer is plenty fast
enough to be the Zephyr cycle timer, and it's rate is synchronized
across the whole system (including the host CPU), making it a better
choice for timing-sensitive applications.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:21:43 2020 +0300
soc: cavs_v25: Enable general samples build
Enables general samples build for SOC cavs_v25.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 15:13:53 2020 +0300
soc: cavs_v20: Enable general samples build
Enable general sample build.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 14:35:13 2020 +0300
soc: cavs_v18: Fix build general samples
Fix building general samples for CAVS18.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 14:22:40 2020 +0300
soc: intel_adsp: Add support for other SOCs
Support other SOCs in the "ready" message to the Host.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 10 13:25:39 2020 +0300
soc: intel_adsp: Move adsp.c to common SOC area
Move adsp.c to common and clean makefiles.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 17:18:18 2020 +0300
boards: intel_adsp: Remove dependency on SOF
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 14:29:44 2020 +0100
soc: xtensa: cavs: build now good for cavs20 + 25
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 15:57:01 2020 +0300
soc: cavs_v15: Fix build for hello_world
Fix build for other then audio/sof targets.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:50:12 2020 +0300
sample: audio/sof: Remove old overlays
Removing old overlays used to switch logging backend.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Jun 8 15:02:01 2020 +0300
soc: intel_adsp: Correct TEXT area
Correct HEADER_SPACE and put TEXT to:
(HP_SRAM_WIN0_BASE + HP_SRAM_WIN0_SIZE + VECTOR_TBL_SIZE)
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:44:47 2020 +0300
soc: intel_adsp: Trivial syntax cleanup
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 14:41:07 2020 +0300
soc: intel_adsp: Fix bootloader script path
Make it possible to find linker script if build is done not inside
ZEPHYR_BASE.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 12:10:17 2020 +0100
soc: xtensa: cavs20/25: fix build with new headers - WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 9 13:35:38 2020 +0300
soc: intel_adsp: Fix include headers
Fixes include headers
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 9 10:38:50 2020 +0100
soc: xtensa: cav18: updated headers- WIP
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Fri May 1 15:29:26 2020 -0700
soc/xtensa/intel_adsp: Clean up MP config logic
CONFIG_MP_NUM_CPUS is a platform value, indicating the number of CPUs
for which the Zephyr image is built. This is the value kernel and
device code should use to predicate questions like "is there more than
one CPU?"
CONFIG_SMP is an application tunable, controlling whether or not the
kernel schedules threads on CPUs other than the first one. This is
orthogonal to MP_NUM_CPUS: it's possible to build a "SMP" kernel on a
uniprocessor system or have a UP kernel on a MP system if the other
cores are used for non-thread application code.
CONFIG_SCHED_IPI_SUPPORTED is a platform flag telling an SMP kernel
whether or not it can synchronously signal other CPUs of scheduler
state changes. It should be inspected only inside the scheduler (or
other code that uses the API). This should be selected in kconfig by
soc layer code, or by a driver that implements the feature.
CONFIG_IPM_CAVS_IDC is a driver required to implement IPI on this
platform. This is what we should use as a predicate if we have
dependence on the IPM driver for a platform feature.
These were all being sort of borged together in code. Split them up
correctly, allowing the platform MP layer to be unit tested in the
absence of SMP (c.f. tests/kernel/mp), and SMP kernels with only one
CPU (which is pathlogical in practice, but also a very good unit test)
to be built.
Also removes some dead linker code for SMP-related sections that don't
exist in Zephyr.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Jun 8 16:41:55 2020 +0100
soc: xtensa: bootloader - use linker script
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Jun 8 16:26:18 2020 +0100
soc: xtensa: further fix headers - WIP
Simplify the directory structure, WIP for cavs20 and cavs25
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Jun 8 12:59:30 2020 +0300
soc: cavs_v15: Remove unneeded include
Remove include fixing build.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Jun 7 12:37:35 2020 +0100
soc:xtensa: adsp: remove sof specific code from soc headers
TODO: v1.8+
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Thu Jun 4 23:19:37 2020 -0700
intel_adsp_*/doc: fix duplicate .rst labels
Quick fix purely to make the build green again.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Thu Jun 4 22:34:40 2020 -0700
samples/audio/sof: use OVERLAY_CONFIG to import apollolake_defconfig
This reverts commit 21f16b5b1d29fca83d1b62b1b75683b5a1bc2935 that
copied it here instead.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri Jun 5 12:34:48 2020 +0300
soc: intel_adsp: Move soc_mp to common
Moving soc_mp to common SOC area, it still needs fixes for taking
number of cores from Zephyr Kconfig, etc.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 16:05:06 2020 +0300
soc: intel_adsp: Move memory.h from lib/
For those files from SOF referencing platform/lib/memory.h we have
include.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 15:20:09 2020 +0300
soc: intel_adsp: Rename platform.h to soc.h
Rename to prevent including it from SOF.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 11:47:55 2020 +0300
soc: intel_adsp: Move headers
Move headers to more convenient place
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Jun 4 11:21:51 2020 +0300
soc: intel_adsp: More SOC cleaning
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Marc Herbert <marc.herbert@intel.com>
Date: Mon Jun 1 15:31:34 2020 -0700
samples/audio/sof: import sof/src/arch/xtensa/ apollolake_defconfig
Import modules/audio/sof/src/arch/xtensa/configs/apollolake_defconfig
into prj.conf and new boards/up_squared_adsp.conf
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 15:07:40 2020 +0100
soc:xtensa: adsp: let SOF configure the DSP for audio
Let SOF do this for the moment.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 15:06:20 2020 +0100
soc: xtensa: cavs: remove headers similar to cavs15
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 3 15:58:38 2020 +0300
soc: intel_adsp: Move ipc header to common
Remove duplicated headers from CAVS to common SOC part
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Jun 3 13:02:09 2020 +0300
soc: cavs_v15: Remove unneeded headers
Remove also from CAVS15.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 18:34:11 2020 +0300
Remove more headers
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 14:12:09 2020 +0100
soc: xtensa: remove cavs sod headers for drivers and trace.
Duplicate cavs15 headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Jun 3 14:05:12 2020 +0100
samples: move sof dai, dma and clk configs to SOF
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 17:38:45 2020 +0300
soc: intel_adsp: Remove more duplicated headers
Remove more headers
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue Jun 2 15:50:03 2020 +0100
samples: sof: remove pm realted files.
Use the SOF versions.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 16:55:40 2020 +0300
WIP: Strip lib from include path
WIP, pushed for sync
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 14:44:33 2020 +0300
soc: intel_adsp: Remove more headers
Remove even more common headers
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Jun 2 14:00:47 2020 +0300
soc: intel_adsp: Remove SOF headers
The headers would be used by audio/sof app directly from SOF module.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Sat May 30 11:01:26 2020 -0700
soc/intel_adsp: Alternative log reading script
This script speaks the same protocol and works with the same firmware,
but:
* Is a single file with no dependencies outside the python3 standard
library and can be run out-of-tree (i.e. with setups where the
firmware is not built on the device under test)
* Operates in "tail" mode, where it will continue polling for more
output, making it easier to watch a running process and acting more
like a conventional console device.
* Has no dependence on the diag_driver kernel module (it reads the DSP
SRAM memory directly from the BAR mapping in the PCI device)
* Is MUCH smaller than the existing tool.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 28 16:17:51 2020 +0300
Decrease HEP pool size to 192000
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:27:00 2020 +0100
soc: xtensa: cavs25: complete support for cavs25
Builds, not tested on qmeu due to missing SOF ROM (TODO)
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:24:26 2020 +0100
soc: xtensa: cavs20: complete cavs20 support
Now boots on qemu.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:22:13 2020 +0100
soc: xtensa: cavs18: complete boot support
Now boots on qemu.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:19:23 2020 +0100
soc: xtensa: cavs15: use cavs15 instead of apl as linker soc name
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 29 10:16:06 2020 +0100
TODO: samples: sof: work around missing trace symbols.
Disable local trace.
Needs trace updates finished before this can be removed.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:57:19 2020 +0100
dts: xtensa: rename apl to cavs15 DTS
This DTS is used by more than APL SOC. i.e. all CAVS15 SOCs
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:52:20 2020 +0100
west: commands: sign: Add signing support for other CAVS targets
Sign for CAVS15, CAVS18, CAVS20 and CAVS25 SOCs
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:50:07 2020 +0100
boards: xtensa: cavs: used Zephyr mask macro
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed May 27 15:49:46 2020 +0100
soc: xtensa: move code to SOF
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 26 11:40:36 2020 +0100
soc: xtensa: use SOF versions of clk
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 18:38:45 2020 +0300
soc: intel_adsp: Send FW ready for non SOF configuration
Configure windows and send FW ready when used without SOF, should be
loaded with fw_loader script.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 18:02:22 2020 +0300
soc: intel_adsp: Use SOF version of the file
Use exact copy from SOF module.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:47:27 2020 +0300
soc: intel_adsp: Clean up include headers
Remove SOF mentions from the SOC headers.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:43:05 2020 +0300
soc: intel_adsp: Move SOF specific code to samples/audio/sof
Move SOF specific code to the SOF sample.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:39:42 2020 +0300
soc: intel_adsp: Use SOF module's version of mem_window.c
Use exact copy from SOF module.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 17:36:41 2020 +0300
soc: intel_adsp: Use exact copy from SOF module
Use SOF module verion of the clk.c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 25 14:03:35 2020 +0300
soc: xtensa: Add {SOC_FAMILY}/common/include path
Add ${SOC_DIR}/${ARCH}/${SOC_FAMILY}/common/include path if exist.
Fixes issues for xtensa SOCs.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:18:50 2020 +0100
soc: xtensa: cavs common: fix headers for build
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:10:57 2020 +0100
soc: xtensa: adsp: add so_inthandlers.h for Intel platforms
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 25 16:08:26 2020 +0100
cmake: xtensa: select correct compiler per CAVS target.
TODO: what about XCC ?
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue May 19 14:59:26 2020 +0300
boards: up_squared_adsp: Move SOF configuration to samples
Move SOF-specific configuration to samples/audio/sof prj.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri May 15 15:29:50 2020 +0300
soc: intel_adsp: Move SOF code to modules/audio/sof
Move SOF dependent code out of SOC area.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 14 17:30:38 2020 +0300
Move task_main_start() to audio/sof sample
Start task_main_start() from main of audio/sof sample.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed May 13 15:37:20 2020 +0300
Rename up_xtreme_adsp to intel_adsp_cavs18
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon Apr 27 14:12:59 2020 +0300
Add sample audio/sof for SOF initialization
Add dedicated sample where we put SOF specific initialization.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 18:49:36 2020 +0300
WIP: soc: cavs_v18: Cleanup
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 15:44:06 2020 +0300
soc: cavs_v15: Move soc init to common part
Moving SOC init to the right place.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Mon May 11 15:02:28 2020 +0300
soc: intel_adsp: Move common part to special dir
Moving common part to common/adsp.c
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Fri May 8 14:37:50 2020 +0300
boards: up_xtreme_adsp: Add initial up_xtreme_adsp board
Add initial board copying existing up_squared_adsp board and using
CAVS1.8 SOC family.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu May 7 15:30:51 2020 +0300
soc: intel_adsp: Generalize bootloader
Move bootloader to soc/xtensa/intel_adsp making it available for other
boards.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 5 21:31:00 2020 +0100
boards: xtensa: up_squared: Add support for all CAVS
Add boot support for all CAVS versions. TODO: needs to be made common
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Tue May 5 21:25:34 2020 +0100
soc: xtensa: intel_adsp: Manage cache for DMA descriptors
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 4 21:10:50 2020 +0100
soc: xtensa: adsp: use 24M567 clock
Use audio clock
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 4 10:04:01 2020 +0100
xtensa: soc: adsp: enable system agent
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 15:03:07 2020 +0100
soc: xtensa: intel_adsp: increase mem pool to 192k
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 15:02:31 2020 +0100
soc: xtensa: intel_adsp: re-enable DMA trace
Buffer will be empty (as trace items sent to Zephyr LOG) but
logic is running.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 11:18:55 2020 +0100
soc: xtensa: intel: dont use uncache region yet.
Some code was still using this region. Use later.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun May 3 10:07:28 2020 +0100
soc: xtensa: intel_adsp: fix notifier init
Topology now loads.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 21:18:38 2020 +0100
boards: up2: Need to use sof config for bootloader
This will need uncoupled at some point. For testing today.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 21:16:38 2020 +0100
boards: up2: increase heap to 128k
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Apr 30 11:35:19 2020 +0300
boards: up_squared_adsp: Use bigger HEAP
Use HEAP from old demo.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri May 1 16:06:32 2020 +0100
soc: xtensa: intel_adsp: Fix config.h naming collisions
Rename sof version to sof-config.h
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Thu Apr 30 11:22:42 2020 +0300
Small cleanups
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 29 22:00:44 2020 +0300
tests: sof/audio: Test ll scheduler
Add more tests for scheduler.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 29 18:38:35 2020 +0300
tests: Add first schedule test
Add initial test for testing scheduling.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 29 13:36:23 2020 +0100
soc: xtensa: rmeove build warnings
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 18:04:33 2020 +0300
soc/intel_adsp: Register sof logging
Register sof logging for tracing
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 14:16:55 2020 +0300
boards: up_squared_adsp: Define HEAP_MEM_POOL_SIZE
Define HEAP_MEM_POOL_SIZE when SOF enabled.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 28 10:09:20 2020 +0300
tests: audio/sof: Add interrupt API for testing
Add initial interrupt API for testing.
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 27 15:54:28 2020 +0100
soc: xtensa: adsp: Update linker script for SOF sections.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 27 11:20:01 2020 +0100
soc: xtensa: adsp: send SOF FW metadata as boot message
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Apr 26 21:47:20 2020 +0100
soc: xtensa: adsp: re-enable all SOF IP init.
Do all SOF IP init.
TODO: ATOMCTL, WFI on LX6
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sat Apr 25 15:30:40 2020 +0100
soc: xtensa: irq: Make sure IPC IRQ is registered.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 20:56:09 2020 +0300
tests: sof: Enable console
Enable console for the test.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 17:57:22 2020 +0300
soc: cavs_v15: Fix XTENSA_KERNEL_CPU_PTR_SR
Use correct value for XTENSA_KERNEL_CPU_PTR_SR.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Wed Apr 22 14:48:31 2020 +0300
tests: audio/sof: Add tests for alloc API testing
Add initial tests for allocation API testing. Can be extended for
other later.
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 21 17:49:32 2020 +0300
logging: Enable xtensa simulator backend for ADSP
Enable xtensa simulator backend for SOC_FAMILY_INTEL_ADSP.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 20:58:30 2020 +0100
soc: xtensa: add common cpu logic
Support for additional cores.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Date: Tue Apr 21 10:11:07 2020 +0300
Update west.yaml to point to the latest repo
Update west.yaml
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:17:01 2020 +0100
soc: xtensa: cavs: Fix build for clk.c on cavs18+
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:05:31 2020 +0100
soc: xtensa: cavs15: removed unused headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:05:09 2020 +0100
soc: xtensa: cavs25: align with SOF headers
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:03:52 2020 +0100
soc: xtensa: cavs20: align with SOF headers
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 16:03:09 2020 +0100
soc: xtensa: cavs18: Align with SOF headers.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Apr 20 11:42:39 2020 +0100
west: sof: Updated to latest version.
Now builds, links and runs SOF code (but not to FW ready).
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Sun Apr 19 13:28:53 2020 +0100
xtensa: intel adsp: build in SOF symbols if CONFIG_SOF
Code now fully links against SOF. Needs to be run tested.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Wed Apr 15 10:19:28 2020 -0700
DO NOT MERGE: temporarily add thesoftproject as remote for sof module
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Wed Apr 15 10:33:40 2020 -0700
ipm: cavs_idc: use the IPC/IDC definitions in SoC
The SoC definitions have the necessary IPC/IDC bits so there is
no need to define them separately.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 14:30:20 2020 +0100
TODO: config: Use static config for SOF module.
TODO: needs to be generated as part of SOF kconfig
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Fri Apr 10 21:56:07 2020 +0100
HACK: Add SOF into build
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:55:15 2020 +0100
west: modules: Add SOF audio module.
Add support for building SOF as a Zephyr module. This is the starting
point for add SOF audio into Zephyr. Currently builds but does not use
any symbols yet.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:48:48 2020 +0100
WIP soc: adsp-cavs15: Use same include directory structure as SOF
Use the same directory structure as SOF to simplify porting and allow
SOF to build without Zephyr until porting work is complete.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Apr 15 13:43:44 2020 +0100
WIP soc: adsp-common: Use same include directory structure as SOF
Use the same directory structure as SOF to simplify porting and allow
SOF to build without Zephyr until porting work is complete.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:36:32 2020 +0000
WIP: soc: adsp-common: cache is common across all Intel ADSP platforms
De-duplicate soc.h cache definitions.
TODO: this needs done for other common functions.
TODO: need to fix include path
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:07:43 2020 -0700
WIP: soc: cavs25: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:07:12 2020 -0700
WIP: soc: cavs20: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 30 11:06:40 2020 -0700
WIP: soc: cavs18: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 12:37:17 2020 -0700
soc: intel_adsp: use main_entry.S in common for cavs_v15
The files are identical anyway.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 11:38:14 2020 -0700
soc: intel_adsp/cavs_v15: link common code
Let cavs_v15 link against the code compiled under common/.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 13:08:28 2020 +0000
WIP: soc: common: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:37:32 2020 +0000
WIP soc: adsp-cavs15: build power down support
Build the power down support for CAVS1.5
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 12:40:17 2020 +0000
WIP: soc: cavs15: Import SOF SoC support
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 16 14:30:08 2020 +0000
soc: cavs15: Add missing SHIM registers.
SOF commit 2746df76b98f21d3e0b2c5cd4fe405c9a42014a4
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon Mar 9 15:43:01 2020 +0000
xtensa: intel_adsp/cavs_v15: fix usage of LP SRAM power gating
Remove LSPGCTL as it can cause confusion, use SHIM_LSPGCTL instead.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Wed Feb 26 15:28:48 2020 +0000
boards: up_squared_adsp: Use local xtensa HAL instead of SDK HAL
SDK HAL is deprecated for Intel ADSP SoCs so fix and use local HAL
module.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 10:45:15 2020 -0700
soc: add Intel Audio DSP SoC family
This creates a SoC family for the audio DSPs on various
Intel CPUs. The intel_apl_adsp is being moved into
this family as well, since it is part of the CAVS v1.5
series of DSPs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Daniel Leung <daniel.leung@intel.com>
Date: Mon Mar 30 11:29:02 2020 -0700
soc: xtensa: add CMakeLists.txt
Add CMakeLists.txt under soc/xtensa so that CMakeLists.txt
inside each SoC directory will be included, similar to
what ARM and RISCV have.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:43 2020 -0700
Revert "boards: up_squared_adsp: Add flasher script"
This reverts commit 80f295a9dd.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:32 2020 -0700
Revert "boards: up_squared_adsp: Update logtool tool"
This reverts commit 7770d182c1.
Author: Andy Ross <andrew.j.ross@intel.com>
Date: Wed Jun 17 12:30:23 2020 -0700
Revert "soc: intel_adsp: Generalize bootloader"
This reverts commit d6a33ef467.
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
soc: xtensa; intel: remove sof-config.h - SQUASH
No longer used.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add option to clear memory slot before writing logs, making reading
logs more easy.
Add timestamp logging option
Add option to enable timestamp for ring buffer backend. Timestamp may
consume little memory we have for ring buffer.
Add timestamp logging option
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
net_icmp4_input() may net_pkt_unref() a packet. The header mustn't be
accessed after this or the system may crash.
Signed-off-by: Oliver Hitz <oliver@net-track.ch>
This commit makes sure the string generated by bt_uuid_to_str is correct
if the architecture is big-endian.
Signed-off-by: François Delawarde <fnde@demant.com>
Status callback was logging whenever some statuses where
present. Those are not used by HCI class so drop them
and do not LOG if not necessary.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
USB bus might be suspended to save power. After the device
is Resumed from Suspended state there is a need to restart
OUT transfers for Endpoints used by HCI class. The transfers
shall be restarted only if the device was Resumed after Suspend
from Configured state. This patch applies the fix.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Existing openthread_api_mutex_lock()/unlock() functions are
crucial to assure thread safety of an application which
needs to use OT API directly, but some applications may also
require a non-blocking version of the former for less critical
OT-related tasks.
Add openthread_api_mutex_try_lock() which never waits and
exits immediately if the mutex is held by another thread.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
If there are more than one RX or TX threads, then make the name
of each of them unique so that it is easier to figure them out
in "kernel stacks" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The name of the connection manager thread (conn_mgr_thread) was
unnecessarily long in "kernel stacks" command. So make the name
to "conn_mgr" which fits nicely to the output of that command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove the range on the setting the bluetooth BT_RX_STACK_SIZE.
This range prevents setting the RX stack size lower than 1024,
which depending on the application is too high.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
If an address was obtained by IPCP, it should always be removed in
ipcp_down(). This commit replaces the predicate with something slightly
more robust.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Windows 10 sends ECN-Echo and Congestion Window Reduced (CWR) flags
together with SYN flag in the connection establishment but the code
did not ignore these flags and send just SYN back (instead of SYN|ACK).
This caused the connection establishement in application level to
fail as the application was never notified about it.
Fixes#29258
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit moves IPv6 initialization from OT init to OT start to
avoid unwantedly bringing 802.15.4 radio up.
Previously, even when OT manual start was enabled, the radio would
be receiving frames resulting in unnecessary power consumption and
causing issues for instance when the device just wants to use
Bluetooth for provisioning befor moving to Thread.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Another team reported that current default values for number of allowed
IP addresses per child (4) and and max number of children (10) are too
small for some customers.
Increased the values allowed configuring child count.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
OpenThread mac counters require rx failed notification to work properly.
Made use of previously implemented notification.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Add prompt to USB_DEVICE_NETWORK_ECM_MAC Kconfig option to allow
users to change it. The current default value is assigned for
documentation purposes in RFC 7042.
Signed-off-by: Joakim Algrøy <joakimalgroy@gmail.com>
According Mesh Spec 1.0.1 Section 7.2.2.2.1 Advertising
A node that does not support the Proxy feature or has the Proxy
feature disabled shall not advertise with Network ID.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Be consistent in the permission handling of the discovered attribute
in the temporary object given in the discovery callback.
For characteristics the permission field was set to READ, while for
all other attributes it was set to 0.
Fixes: #29083
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update check in the bt_gatt_attr_value_handle API function to use the
UUID of the function, in case the attribute has been declared with a
different read handler, or the attribute is a temporary object
where the read attribute has not been set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Clip the timeout to 64 seconds, this avoids the timeout value to
increase to high values (e.g. several years).
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
This avoids code duplication. The same logic was present
in dhcpv4_send_request() and dhcpv4_send_discover().
Signed-off-by: Armand Ciejak <armand@riedonetworks.com>
The TCP2 was calling accept callback before actually finalizing
the connection attempt.
Fixes#29164
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor use of 16-bit common GATT UUID types where a complete UUID
object is declared on the stack only to use the 16-bit value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Reduce the size of the disconnect pool required the full MTU
for a disconnect request.
Also completely remove the pool when not needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
OSDP secure channel require a truly random number generator
source. Make this dependency explicit.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix the missing return statement when Auxiliary PDU
transmission is aborted because Primary PDU does not have
the aux pointer setup. Also, directly stop clocks and
post LLL done, like being done in other state/role LLL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor Extended Advertising conditional compilation reorder
to better reflect the order Observer->Extended Scanning
dependency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
NODE_RX_TYPE_EXT_ADV_TERMINATE is generated in ULL context
and shall not increment received PDU quota value.
Fixes#29101.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A normal websocket close sequence:
close(websock) ->
websocket_close_vmeth() ->
websocket_disconnect()
close(ctx->sock) called in the function websocket_disconnect()
and cause websocket_close_vmeth() called again.
Finally stack overflow by loop close call.
It's maybe a side-effect by PR #27485
Signed-off-by: Jackie Ja <qazq.jackie@gmail.com>
The existing calculation of the BULK_EP size can sometimes result in a
bulk EP size that is not spec-compliant. The accepted BULK_EP sizes are
8, 16, 32 or 64 bytes.
Additionally, the INT_EP size is always set to the max EP size since
BT_BUF_RX_SIZE is always greater than that (min. 73 in Kconfig).
This commit sets the BULK and INT endpoint sizes to their maximum
supported values.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Port minor anchor point synchronization drift implementation
changes.
Relates to changes in commit 732de50f67 ("Bluetooth:
controller: Refactor out drift compensation code").
Fixes#29062.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Default shell stack size is not always enough when used with
OpenThread. Increasing it to the found adequate value.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Fix a compilation error when shell help feature was not selected and
but shell help command was compiled.
Fixes: #29042
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This patch adds Secure Channel capabilities to osdp Control Panel and
Peripheral Device modes.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Improve token handling by removing special meaning of tokenlen == 0,
which allows to handle server requests w/o a token (so far such
requests would cause the lwm2m engine to autogenerate token in the
response).
In order to autogenerate token during message initialization, use
special symbol `LWM2M_MSG_TOKEN_GENERATE_NEW`. If no token is wished to
be used, simply set the tokenlen to 0.
Additionally, fix an issue with token autogeneration, where invalid
token len was used (0 instead of 8).
Fixes#28299
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M engine did not set response code for the Bootstrap-finish message,
hence it replied with the code copied from the request which is not
correct. Fix this by setting correct code for the Bootstrap-finish
reply.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The error handling code currently has a couple of issues:
* It relies on ordered lists and upstream not changing any constants.
* Converted messages are not stored in constant memory which means
that log_strdup is needed whenever they are printed.
This change also factors out error handling to a separate file,
lw_priv.{c,h}, to facilitate reuse in a future secure element and
state storage implementation.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
For consistency with other parts of Zephyr, the public APIs available
in lorawan subsystem now returns error codes from the set defined in
errno.h.
Signed-off-by: Kuba Sanak <contact@kuba.fyi>
[mani: reworked the code and commit a bit for upstream]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
SystemMaxRxError is used to negotiate overall timing error for Rx
in the loramac-node library. Hence, add support for configuring this
parameter from Kconfig.
Signed-off-by: Kuba Sanak <contact@kuba.fyi>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Add initial support for LoRaWAN based on Semtech's loramac-node
library. Current implementation only supports OTAA config and
sending data to LoRaWAN server like ThingsNetwork.
While at it, this commit also moves the "loramac-node" library
definition from drivers/lora to subsys/lorawan. This is required
because, subsys/lorawan gets processed before drivers/lora and
that creates issue while building.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Add assert check to detect failure to enqueue ticker
operations. This will avoid HCI thread from stalling
forever on k_sem_take.
This assert will trigger on design fault, not defining
enough queued ticker operations count.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The logging subsytsem had if else if constructs without final
else statement. This commit adds else {} to comply with
coding guideline 15.7.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Added a missing NULL pointer dereference check and made the
structure member scan->per_scan.sync and timeout_reload as
volatile, as they are modified in ISR context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added link structure allocation explanation related to HCI
event generation by the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Experimental keyword to LE Periodic Advertising in
Advertising and Synchronization state Kconfig title.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the auxiliary pointer and sync information offset and
offset unit population. Offsets are 13-bit value, use 300 us
offset unit when offset value using 30 us offset unit does
not fit in 13-bits.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor print format update, updated format for Periodic
Advertising Interval, and added SID to be printed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add the missing resources like ticker instances, Rx PDU
buffers and memory queue link buffers, that are required
for Periodic Advertising Sync creation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the redundant ticker update check, ticker is not
stopped and started in Periodic Advertising unlike in a
Connection Update Procedure in connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace printk in ISR with BT_WARN to avoid problems with
co-existing with logging subsystem.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove generation of Periodic Sync Lost HCI event generation
that is not needed as per BT Spec. v5.2 Vol.4 Part E.
Section 7.8.69.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix uninitialized rl_idx value for the Extended Advertising
PDU received in the auxiliary channels. This caused
uninitialized rl_idx to be used by HCI layer and fail an
assert check in ull_filter.c file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing periodic advertising start due to missing
allocation of auxiliary context when no Extended
Advertising PDU on auxiliary channels.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove conditional compilation on structure definition in
pdu.h so as to allow inclusion of header files with
function prototypes that use those structures. I.e. to
avoid conditionally including the header file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to perform Periodic Sync Terminate,
generation of Sync Lost on terminate and on remote device
termination of Periodic Advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to handle Periodic Advertising clock
drift in the created Periodic Advertising Sync instance.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix auxiliary channel scanning to capture the PDU end
timing that is need to correctly setup Periodic Sync.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fill the correct local clock accurracy in the Sync Info
structure in the Periodic Advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out drift compensation implementation so as to
reuse it for Periodic Sync feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added initial implementation of setting up of Periodic Sync
and scheduling the Radio Events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out common lll_abort_cb function so that it can be
used across Periodic Advertising and Periodic Advertising
Sync creation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out clock ppm interface so that it can be reused
for Periodic Advertising Sync feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This adds a Kconfig option for enabling post-mortem mode of SystemView.
This is useful for crashes that occur after a longer period of time.
Signed-off-by: Mattia Fiumara <mattia.fiumara@bgrid.com>
Simple change that makes fs_seek and fs_tell return -ENOTSUP when
file system does not implement the seek/tell.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Don't use the ATT structs that has contains only a flexible array
member. This is not supported by C99 standard, only through GNU C
extension with zero length array.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
With only single RX buffer there is a high chance that such buffer will
not be processed before new bytes come in over UART. This is why it is
good to have at least two buffers, one which can be processed by SMP
layer, while another is being filled with new incoming bytes.
Add Kconfig option which allows to configure multiple buffers filled
with received UART SMP fragments. Use default value of 2, so we can
safely process already received frame in thread, while new fragment
comes in concurrently.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far there was a simple char array used as buffer, with additional
variable representing number of bytes already written into it. After
full frame was written, a boolean flag was simply set to notify thread
about being ready to be processed. There was however no mechanism
implemented to prevent new incoming bytes from overwriting such buffer
before (or during) being processed.
Use net_buf to store temporary frame. Define dedicated net_buf_pool,
from which such buffer will be allocated and freed after being
processed. This will prevent from reusing the same buffer before having
it fully processed (and returning once again to available buffer pool)
in shell thread.
Define also fifo that will store buffers that are ready to be
processed. This will be the mechanism for notifying thread about new
UART SMP fragments.
net_buf pool and k_fifo are used on purpose, keeping in mind their
additional overhead (mostly in RAM/ROM usage). This makes the code ready
for increasing number of buffers if needed. In this commit however we
stick with only 1 buffer, to keep minimal changes in processing flow.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Fix implicit declaration warning for peripheral_latency_cancel
by moving it to ull_slave file.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
So far, `LWM2M_RD_CLIENT_EVENT_BOOTSTRAP_TRANSFER_COMPLETE` event was
reported before the final ACK for the Bootstrap Finish was sent from the
client side. This could cause delays in the ACK sending, in case the
application wanted for instance to store the received data in flash.
Fix this, by reporting the
`LWM2M_RD_CLIENT_EVENT_BOOTSTRAP_TRANSFER_COMPLETE` event on the next
state tansition (before the actual registration starts).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
"Public Key or Identity" resource is of opaque data type, therefore it's
not correct to assume it will be a NULL terminated string (the existing
servers, for instance Leshan, does not include NULL terminator). Use the
actual size associated with the resource instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, the resource instance structure kept only the information about
the buffer length provided to the resource (in the `data_len` field).
While this approach might be enough for integer resources, where the
actual data size is fixed, it did not work for opaque resources. It is
impossible to determine the actual opaque resource length after it's
been written into.
Fix this, by replacing the current `data_len` field of the
`lwm2m_engine_res_inst` with `max_data_len`, indicating the buffer
size, and making the `data_len` field to hold the actual data size of
the resource.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, after `CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP` is enabled,
the LwM2M engine will initiate bootstrap procedure on each run. This
approach limits the flexibility of the application, as it's not always
necessary to go over the bootstrap procedure (for instance, the
application may decide to store the security object obtained during the
bootstrap in flash, and restore it on boot).
Fix this by introducing an additional `flags` parameter to the
`lwm2m_rd_client_start()` function, which provides information whether
to run bootstrap in the current session or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, the LwM2M state machine started in the `ENGINE_INIT` state,
which made it exectue the registration/bootstrap registration even when
`lwm2m_rd_client_start()` was not called. With a new `ENGINE_IDLE`
state, the state machine can wait for the application to actually start
the client before proceeding. It also makes sense to stay in the
ENGINE_IDLE state after successfull deregistration, until the
application restarts the client.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Without removing the stale address obtained during IPCP, it will still
be present the next time we do IPCP, marked as "in use" by the network
stack even if it is stale. This turned out to be a showstopper for
restarting the PPP stack on devices without static IP.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
The BT code uses co-op thread priorities to implement some
critical sections. This won't work with SMP turned on.
Express this in our configuration ontology, so that it's
not possible for the end user to set up the system in this
way and get crashes or odd behavior.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This emulator supports enable functionality to start up the device and
read a few samples. It connects itself to any BMI160 device it finds in
the device tree. The SPI emulation controller driver is used to direct
SPI messages from the BMI160 driver to the BMI160 emulator.
Add a few more definitions to the header file, as needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a log message to indicate that a new emulator is attached. Also add
a message in the assert to make it clearer what has gone wrong.
Signed-off-by: Simon Glass <sjg@chromium.org>
This commit fixes PUSH FOTA when opaque content-format is used.
This consists of the following fixes:
* Moved `struct block_context` to a private header, so that it can be a
part of `struct lwm2m_input_context`. This allows content decoders to
make use of the block context data.
* Removed faulty `get_length_left` function from the plain text
decoder, and replace it with coap_packet_get_payload() to obtain the
actual payload size.
* Introduce `struct lwm2m_opaque_context` as a part of block context,
which allows to keep track of opaque data download progress.
* Simplify `lwm2m_write_handler_opaque()` function. It will now only
make calls to `engine_get_opaque` - it's the decoder responsibility
to update the opaque context according to it's content format (for
instance TLV decoder should only update it with the actual opaque
data size, not the whole TLV).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Added a check for adv->lll.aux before starting extended advertising to
fix observed NULL pointer dereference when updating AD data of legacy
advertising.
Fixes#28544.
Signed-off-by: Jordan Montgomery <montytyper@msn.com>
The L4 connected/disconnected events are usually used to detect
when the application is connected to the network. Unfortunately
if the device has also a static address, then the connected event
might be created (for the static address) even if DHCPv4 is not
ready yet and application would not be able to connect (yet) to the
network. In order to allow the application to fine tune the network
connection creation, generate start, bound and stop events for DHCPv4.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Avoid warning about uninitialized variable.
The for loop should do at least two iterations
in a valid execution, hence initialize to an
error value.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
The second argument of this foonction is a bool, so passing 0 and 1
is incorrect.
Coccinelle script:
@@
expression e;
@@
flash_write_protection_set(e,
(
- 0
+ false
|
- 1
+ true
)
)
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
To get a list of all supported shell commands user must hit the TAB
button. It may be awkward on some terminal emulators. This change
enhances the help command in a way it will in addition print all
supported commands.
Fixes: #28785
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Functions shell_help_subcmd_print and shell_help_cmd_print
are more generic. Now they can operate on command passed as an
argument not hard coded active_cmd.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
The "tc" field which was holding the traffic class thread
priority is not used nor needed so remove it from the struct
to save some space.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Changes the callbacks for periodic sync callbacks such that multiple
applications can register callbacks, similar to the connection and
scan callbacks.
This change will make it easier to support the PAST feature, as
PA syncs make be created by the controller which then notifies
the host, and thus the application (if callback registered).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Generates a warning message when building with
CONFIG_TEST_RANDOM_GENERATOR. The purpose is inform that this is not
secure and should not used in production.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Both operands of an operator in the arithmetic conversions
performed shall have the same essential type category.
Changes are related to converting the integer constants to the
unsigned integer constants
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
The scan callbacks may be NULL, which would cause an error if
e.g. the timeout callback wasn't set and the scan terminates after
a timeout.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Using zephyr's internals zsock_ calls make mqtt library more compatible,
now it does not depend on NET_SOCKETS_POSIX_NAMES.
Signed-off-by: Jan Pohanka <xhpohanka@gmail.com>
Remove code and associated tests and Kconfig related to
SETTINGS_USE_BASE64 that was deprecated in Zephyr 2.2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
No real need to assert when the send timer is cancelled. Just
check if there is re-transmission going on and do nothing if
there is not.
Fixes#28758
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The local and accepted socket was not bound which caused the
local address to be set as NULL. This then caused issues when
zsock_getsockname() was called by the application.
Fixes#28735
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix conditional compilation to allow building test shell
with Periodic Advertising Sync alone.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix controller implementation to cancel peripheral latency
when initiating new control procedures.
Fixes#28699.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add checks to abort connection radio event preparation and
start, if the connection terminates with a race condition
with new radio event being prepared or being in prepare
pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Since the info parameter is only read from and never written the const
in the function parameter should be present.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Fix undeclared CONFIG_BT_CTLR_DATA_LENGTH_MAX when Force
MD bit automatic feature is enabled in nRF51 Series.
Fixes#28774.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds additional Kconfigs that allow for changing
configuration values for the Zephyr port in OpenThread.
Those values are:
- number of the internal OT message buffers
- number of the state change callbacks
- number of the EID-to-RLOC cache entries
- size of the NCP buffer
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Instead of directly checking the multicast IPv4 address, use
the net_ipv4_is_addr_mcast() utility function.
Fixes#26584
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
MQTT client state is protected using mutex. That mutex however is
temporarily unlocked when calling event callbacks. This means that in
client_disconnect() transport can already be disconnected, but without
marking it as such in client->internal.state.
When mutex is unlocked in event_notify() function, then there are two
possible paths of failure:
1) First possibility is when RX and TX are called from two separate
threads, so that the other thread gets resumed and functions like
verify_tx_state() (e.g. in mqtt_publish()) allow to continue
communication over disconnected medium.
2) Another possibility is that user calls mqtt_abort() or
mqtt_disconnect() in event handler.
In both cases MQTT library tries to send or receive data, possibly
followed by second close() of underlying file descriptor.
Prevent using disconnected transport by clearing MQTT client state right
after calling mqtt_transport_disconnect(), without releasing mutex, even
for a while.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
When compiling with CONFIG_NET_NATIVE=n and CONFIG_NET_OFFLOAD=n
then the following error is printed.
```
In file included from zephyr/subsys/net/ip/ net_if.c:23:0:
zephyr/subsys/net/ip/net_private.h: In function 'net_context_state':
zephyr/subsys/net/ip/net_private.h:58:27:
error: type of 'context' defaults to 'int' [-Werror=implicit-int]
static inline const char *net_context_state(context)
```
This add `struct net_context *` as type for context.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Depending on the Bluetooth features enabled, the HCI
packets can be 264 Bytes long. For HCI over USB the HCI packet
is handled in data stage of USB transfer. Buffer for the data
stage was too short and USB driver was STALLing the data stage
making it unable to complete. Extend the data stage buffer
to 266 Bytes if HCI USB is selected and BT_RX_BUF_LEN > 127
indicating that longer HCI packets are needed.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Remove obsolete include of the shell_uart.h file.
It is sufficient to include the shell.h file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Since commit b3a1ede830 OpenThread uses the Zepyhr settings submodule
instead of writing to the flash directly. The flash.c file is not
compiled anymore, so let's just remove it. Also remove the
OT_PLAT_FLASH_PAGES_COUNT Kconfig option which was solely used by that
file.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Added automatic runtime calculation of Forced MD bit count
based on incoming Tx buffer throughput.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Force MD bit feature wherein connection events can be
extended to match the rate at which applications provide
new Tx data. MD bit in Tx PDUs is forced on if there has
been CONFIG_BT_CTLR_TX_BUFFERS count number times Tx/Rx
happened in a connection event. The assumption here is,
if controller's tx buffers are full, it is probable that
the application would send more Tx data during the
connection event, and keeping the connection event alive
will help improve overall throughput.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add force Md bit feature wherein connection events can be
extended to match the rate at which applications provide
new Tx data.
Fixes#27981.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the check that decides to close a connection event,
which was missing a check on MD bit being set for empty PDU
to be Tx-ed out.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Optimize the Tx PDU preparation, empty PDU only needs MD bit
to be modified, other fields be initialised only at power up.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix premature connection event close due to the new Tx
buffers not being de-multiplexed and routed to connection's
Lower Link Layer context when they arrive while being
inside the connection's radio event.
Also, fix master prepare to demux and enqueue two Tx buffers
so that MD bit can be set correctly.
Relates to #27981.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor ull_conn_tx_ack function as it no longer needs to
return the connection context back to caller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Check that Ethernet header is in the first net_buf fragment.
This is very unlikely to happen as device driver is expected
to only deliver proper Ethernet frames to upper stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We run various TCP function from work queue. Make sure the
connection lock is taken before accessing the connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
support longer name like urn:dev:ops:{OUI}-{ProductClass}-{SerialNumber}
or urn:imei-msisdn:###############-###############
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
Fixed stack being to small for joiner operations.
Enabled auto joining even in case of manual start.
Fixed attachement of SED on norfic radios.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adds check for provisioning random values that are identical to our own,
and terminates the provisioning procedure.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
In bt_set_name we already get name length so let's use it in strncpy
Also fix warning with enable -Wstringop-truncation
Signed-off-by: Ilya Averyanov <a1ien.n3t@gmail.com>
The sync create and sync delete dit not have the correct
amount of mandatory and optional parameters set in the
SHELL_CMD_ARG declarations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sync terminate callback did not set any entries in the
PA sync array to NULL, thus not allowing the shell to
reuse them in case that the sync was lost unexpectectly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of doing slow (non-fast) scan when syncing to
a PA, it will now do a fast scan, which drastically reduces the
time it takes to create the sync. The application may
still do explicit slow scan if wanted.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the application cancels the PA sync, it would update
the scan before clearing the BT_PER_ADV_SYNC_SYNCING flag
which cause the scan to always start again.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Instead of casting k_delayed_work directly to k_work, use the
k_work field name. This avoids warnings from Coverity and
allows the code to work even if the k_delayed_work fields are
re-ordered in the future.
Coverity-CID: 214346
Fixes#28659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix the redundant PDU transmission when the new Tx PDU
buffer is enqueued after MD bit value of zero was
transmitted previously in a connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add dependency to UDP in DHCPv4 Kconfig option as UDP is needed
in DHPCv4 to work properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
An execution path could reach a loop that dereferences a pointer in
conditions where the pointer is null. Add a check to the loop
condition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Bug description:
When in tcp_conn_unref(), in case one of the delayed works is already
submitted to sysworkq (after delay period), e.g. send_timer, the check
of k_delayed_work_remaining_get() prevents calling
k_delayed_work_cancel().
This leads to corrupting sysworkq when zeroing struct tcp* conn.
Note that the "next" pointer for the work queue is part of the struct
work (in _reserved field). Which is, in this case, a member of struct
tcp.
Scenario leading to the bug:
(1) net_tcp_connect() is called from a work in sysworkq
(2) net_tcp_connect() submits conn->send_timer to sysworkq
(3) while net_tcp_connect() is waiting on connect_sem, delay period
passes (z_timeout) and send_timer enters sysworkq work slist
(4) also, some other code (app) submits more works to queue, now pointed
by conn->send_timer in sysworkq work list
(5) connection fails (no answer to SYN), causing a call to
tcp_conn_unref()
(6) tcp_conn_unref() is calling tcp_send_queue_flush()
(7) checking k_delayed_work_remaining_get(&conn->send_timer) returns 0
due to delay period end, but send_timer is still in sysworkq work
slist (sysworkq thread still hasn't handled the work)
(8) BUG!: no call to k_delayed_work_cancel(&conn->send_timer)
(9) back in tcp_conn_unref(), a call to memset(conn, 0, sizeof(*conn))
zeroes conn->send_timer
(10) conn->send_timer is pointed to in sysworkq work slist, but is
zeroed, clearing pointer to following works submitted in stage (4)
(11) EFFECT! the works in stage (4) are never executed!!
NOTES:
* k_delayed_work_cancel(), handles both states:
(1) delayed work pends on timeout and
(2) work already in queue.
So there is no need to check k_delayed_work_remaining_get()
* This is also relevant for conn->send_data_timer
Solution:
removing checks of k_delayed_work_remaining_get(), always calling
k_delayed_work_cancel() for work in struct tcp, in unref, before memset
Signed-off-by: David Komel <a8961713@gmail.com>
Instead of hardcoding the priority1 and priority2 values used
in BMCA, let the user tweak the values via Kconfig.
Fixes#28151
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix bt_le_oob_get_local and bt_le_ext_adv_oob_get_local stuck forever
waiting for the sc_local_pkey_ready semaphore when SC HCI commands
are not supported in the controller.
By using the le_sc_supported helper function the runtime check of HCI
commands and the feature check of CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY
is combined to be handled int the same way.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the le_sc_supported helper function up in the source file so that
it can be re-used in other places without a forward declaration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Since conn->send_data_total is of time size_t we need to use %zu or
we'll get build errors in sanitycheck on 64-bit platforms
Fixes#28605
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the network driver for some reason did not set the data in
the network packet properly, then just drop it as we cannot do
anything with just plain net_pkt.
Fixes#28131
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If hannel don't have alloc_buf and the RX MTU is configured to require
segmentation this warn the user and truncate the RX MTU.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In case where ull_adv::disable() is disallowed, disable_mark is
erroneously re-mark instead of un-marked
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If there is no handler for IPv4 broadcast packet, then ignore it
instead of trying to send an ARP message to resolve the senders
address.
Fixes#21016
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Accourding to the spec the CCC descriptor may occur in any position
within the characteristic definition after the Characteristic Value.
Fixes#28324
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix for handling REJECT_IND PDU received for PHY Update,
Connection Parameter Request and Data Length Update control
procedures.
If a link layer control procedure collision occurs, example
with local initiated PHY Update Procedure, and peer sends a
REJECT_IND PDU, then the PHY Update Procedure is stalled.
Fixes#28282.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
According Mesh Profile Spec 5.4.2.4 Authentication, if device
use Input OOB Authentication method, should send input complete
pub after local public key has been acked.
`bt_mesh_input_string` or `bt_mesh_input_number` directly send
`input_complete`, however does not check whether the pub key has
been sent.
Mesh Provisioning timeout set to `60` seconds, so even this
probability is extremely low, it does not mean that there is no
such probability.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Fix bug in device name shortening handling leading to memory
corruption.
This is triggered by an underflow in the length field of the shortened
name when set_data_len + 2 > set_data_len_max.
Fixes: #27693
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Ignore error when failing to set the passive scanner private address.
This can happen because in between the time we checked if the
advertiser was enabled and the time we execute the set random address
command the state of the advertiser could have changed in the
controller, and we only set the state once the command has completed
in the controller.
Fixes: #25672
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix not setting NRPA before starting scanner.
Occurs with BT_PRIVACY=n and BT_EXT_ADV=y
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We need to have timer that closes the connection for good if
we do not get the FIN and ACK reponse from the peer.
If there is any pending data when application does close(),
send them before sending FIN.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is some error during connection creation, just bail
out in order to avoid null pointer access.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we try to send data but the sending window is full, then
try to kick the resend of the pending data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no space in the sending window, then return -EAGAIN
so that the caller may try later.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We should have a max value for sending window so that application
is not able to use all our net_bufs for queueing packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The socket layer expects to receive -ENOBUFS if we do not have
any network buffers so cannot build a network message to be sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is an error, the net_context.c:context_sendto() will
free the net_pkt, so we must not do it here.
This commit fixes this error message:
<err> net_pkt: *** ERROR *** pkt 0x20421908 is freed already
(context_sendto():1672)
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Usually the out-of-memory situation will clear itself eventually,
so if that happens in TCP, then keep the connection running and
let the user to decide what to do next.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we run out of network buffers and cannot send data, and if
we have a blocking socket, then wait until new buffers are
available before returning. As this might lead to deadlock,
wait only max 10 seconds and return ENOMEM if we cannot get
buffers in a reasonable amount of time.
Fixes#28216
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of hardcoded value of 3, use the value from Kconfig file
so that user can tweak the TCP retry count.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use SYS_SLIST_FOR_EACH_CONTAINER_SAFE() macro when searching
the connection list so that we notice if new entries are added
or removed in the list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of forcing the slist node to be first in the tcp struct,
use the pointer to node when accessing the slist. This way we
can change the ordering of fields in tcp struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Re-structures the `bt_conn_recv()` to support more generic appending of
new ACL data. This also handles the possibility of receiving 0-length
ACL_START and ACL_CONT fragments, whilst maintaining existing
error-checking functionality.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Fixes issue #26900.
A controller may fragment an L2CAP SDUs in any way it sees fit,
including fragmenting the L2CAP header. Likewise, the receiving
controller may send the fragmented header as ACL data to the host.
The Zephyr host assumed that a `BT_ACL_START` was at least 2 bytes long,
and consequently read the two-byte length field from the buffer without
length checks.
This commit allows the `BT_ACL_START` to be less than two bytes,
updating the `conn->rx_len` onces the `BT_ACL_CONT` with the remaining
part of the length field has been received.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Fix Kconfig dependencies for enabling the controller PHY options
for LE 2M Phy and LE Coded Phy. These options should be selectable
without connections enabled when extended advertising has been enabled.
The issue affects out-of-tree controllers that wish to use the
BT_CTLR_PHY_CODED and BT_CTLR_PHY_2M options.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Select the controller feature support for data length and LE 2M PHY
based on the SoC hardware capabilities instead of relying on SoC
family.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
osdp_build_ctx() was returning fixed NULL and the subsequent code did
not check if ctx was NULL due to osdp_build_ctx() failures. Fix both
these issues.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
When attempting to bind a channel if it fails the code will attempt to
cleanup calling bt_iso_cleanup which expects connections of
BT_CONN_TYPE_ISO.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ISO connection does not initialize its tx_complete_work nor it uses for
anything so calling into tx_notify will likely cause a crash.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit 770f232a67 removes an array
termination from the shell_make_argv function. This function was
called from two functions: execute and tab_handle. In the mentioned
commit termination was added only in the execute function.
As a result calling tab_handle function was causing a segmentation
fault. This fix adds array termination to the tab_handle function.
Fixes#28434
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Change so that the caller of lwm2m_init_message is
responsible for generating a message id and remove message id generation
from lwm2m_init_message. Prevents generating a new id when the caller's
intent is to init a message with id 0.
Fixes#28283
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
message id 0 and token 0 have special semantics in the lwm2m engine,
they are used to request generation of new id, mark them as such.
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
Now that CONFIG_BT_CTLR_RX_PRIO_STACK_SIZE defines a stack size, allow
for it to be configurable from a .conf file just like the rest of the
threads in Bluetooth.
Fixes#27768.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replaces the current zero length array for provisioner data with
ifdefs, to silence new gcc 10 warnings about array element access.
Fixes#28371.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Coverity spots that null pointer is passing to flash_img_buffered_write.
This patch fixes the problem.
Signed-off-by: NavinSankar Velliangiri <navin@linumiz.com>
The USB infrastructure currently uses the system work queue for
offloading transfers, CDC-ACM UART transmission/reception, and device
firmware activities. This causes problems when the system work queue
is also used to initiate some activities (such as UART) that normally
complete without requiring an external thread: in that case the USB
infrastructure is prevented from making progress because the system
work queue is blocked waiting for the USB infrastructure to provide
data.
Break the dependency by allowing the USB infrastructure to use a
dedicated work queue which doesn't depend on availability of the
system work queue.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The z length modifier must be applied to avoid build errors when the
format is verified by the compiler on systems where size_t is larger
than int.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Both tx_irq_ena and rx_irq_ena flags shall be updated only
by using UART API. Those flags are used to let the device
start sending or receiving data. Changing those flags without
awareness of the user may lead to errors.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Usage of `pool_wait_sem` was incorrect. The semaphore shall be
dependent on context it was called for. In case of many CDC_ACM
devices one could possibly block others. This fixes an issue by
making semaphore a part of the internal CDC_ACM device structure.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Coverity spots that memory allocated for addr was leaking, but the
code was also leaking the socket file descriptor in the error path.
This patch fixes both problems.
Fixes#28172
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix the OpenThread initialization to prevent the IPv6 interface to
be enabled when `CONFIG_OPENTHREAD_RAW` is set.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
the adv instance should be delete correctly if advertise fail,
Otherwise the instance will unable to allocate if start the legacy again
Signed-off-by: chao an <anchao@xiaomi.com>
Closes: #28331
Configurable initialization priority is useful when using CDC ACM
serial device, for example.
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
The unsigned size_t type variables have been checked for having
negative values.
Fixes#28171, Coverity-CID: 214224
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
CP/PD mode selection is the most frequently looked-for/changed key in
Kconfig. Making that as the first entry for ease of use.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
OSDP subsys was doing a `select SERIAL` in its Kconfig. But this has
other unintended side effects. Change this to
`imply SERIAL_SUPPORT_INTERRUPT`.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Shell was accepting CONFIG_SHELL_ARGC_MAX+1 arguments which lead to
memory corruption and fault. Added error message reported when number
of provided arguments exceeds CONFIG_SHELL_ARGC_MAX.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fixes a memory leak when a virtual address subscription is added for a
model that either has this VA already, or the model has no more space
for subscription addresses.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Because the previous commit fixed the destination address check,
we need to handle msghdr (used by sendmsg()) in CAN socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to specifically check CAN sockets here. This also means
that SocketCAN will need to support sendmsg() call too. This will
come in following commit.
Fixes#28229
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add back call to LE Write Suggested Default Data Length
command so that new connections, receiving Data Length
Update procedure before local device can auto initiate, can
respond with the suggested default data length Tx octets
and Tx time.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When controller is built with extended advertising support but without
LL Privacy build fails due to issue with code that sets TxAdd in aux
PDU:
.../ll_sw/ull_adv_aux.c: In function 'ull_adv_aux_hdr_set_clear':
.../ll_sw/ull_adv_aux.c:502:25: error: 'struct ll_adv_set' has no
member named 'own_addr_type'
502 | sec_pdu->tx_addr = adv->own_addr_type & 0x1;
|
We need own_addr_type value if an advertising set with aux but without
AD is created since we cannot get TxAdd value from other PDU.
ull_adv_aux_hdr_set_clear() can now be called with a flag to explicitly
set AdvA field and pass own_addr_type in 'value' parameter. This allows
to set proper TxAdd when creating new advertising set.
On aux updates, we use TxAdd from other PDU:
- if primary PDU has AdvA, we use TxAdd from that PDU
- if previous secundary PDU has AdvA, we use TxAdd from that PDU
In other case we just return an unpsecified error since this should not
happen in any valid scenario.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
When try to enable CONFIG_DEVICE_POWER_MANAGEMENT for a board,
the #error directive in subsys/power/device.c requires that
"MAX_PM_DEVICE" and "core_devices[]" must be defined exactly in that
file, or a compile error will come up.
For flexibility, this patch move "PM_MAX_DEVICE" to Kconfig and define
a weak version of "z_mp_core_devices[]", so any board or SOC can define
these varibles in their own module.
Signed-off-by: Meng xianglin <xianglinx.meng@intel.com>
The timeout variable in `dtls_rx()` was initialized improperly.
Coverity ID: 214219
Fixes#28161
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The default string representing Sensor Type resource in Generic IPSO
object would not fit into the predefined buffer. Increase the buffer
size and add extra BUILD_ASSERT to detect this situation.
Coverity ID: 214225
Fixes#28164
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The timeout log error message condition in wrong. When the timout
happens the "count == -1" and the condition is invalid.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
is_ep_valid() function was incorrectly searching through
all used endpoints. All endpoints for class must be checked
if they match requested endpoint.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Added a Kconfig option to enable scanner with unreserved
scan window when in continuous scan mode. This will permit
scanner to be always pre-empted by other roles, making it
the lowest in priority when it comes to using the radio.
Fixes#27414.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add timing functions and APIs. This is now used with some of the tests
we have for performance and metrics and will be used whereever timing
informations are needed, for example for tracing, profiling and other
operations where timing info is critical.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The sdhc_spi_write_multi function is sending the CMD25
for multiple block write operation on the SD card
instead of looping the CMD24. This is improving
the transfer speed compared to the sdhc_spi_write function
when the nb of blocks to write is significant (more than 2).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This introduces bt_gatt_attr_get_handle which can be used to resolve
handles of static attributes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make it actually give the original pointer to the attribute and its
resolved handle so static attributes don't need an extra lookup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This optimizes the lookups to skip ahead when attribute pointer is not
located within service array.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds iso shell module which we can be used to exercise ISO related
APIs:
iso - Bluetooth ISO shell commands
Subcommands:
bind :[dir] [interval] [packing] [framing] [latency] [sdu]
[phy] [rtn]
connect :Connect ISO Channel
listen :[security level]
send :Send to ISO Channel
disconnect :Disconnect ISO Channel
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds supports for ISO packets so then can be transmitted and
received with hci_raw driver.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a generic host command handler framework that allows users to
declare new host command handlers with the HOST_COMMAND_HANDLER macro
at build time. The framework will handle incoming messages from the
host command peripheral device and forwards the incoming data to the
appropriate host command handler, which is looked up by id.
The framework will also send the response from the handler back to the
host command peripheral device. The device handles sending the data on
the physical bus.
This type of host command communication is typically done on an embedded
controller for a notebook or computer. The host would be the main
application processor (aka AP, CPU, SoC).
Signed-off-by: Jett Rink <jettrink@google.com>
Some logging configuration are compatible with software-base Link
Layer. Currently only one configuration is supported:
RTT back-end in drop mode and no clean output
Signed-off-by: Guillaume Lager <guillaume.lager@gmail.com>
Add the command add-subscription to the shell to test the
bt_gatt_add_subscription API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow the application to add subscription without resubscribing.
This is needed for persistent bonds that can go to deep sleep and
turn of the RAM or power-cycle.
In this case the application as a GATT client must have a way to add
the subscription callbacks back to the stack before the GATT server
sends notifications.
This should preferable be able to be done before even connecting
since the notifications can arrive immediately after connecting to
the peer.
The stack cannot persist this on it's own since it must remember the
function pointers for the callback functions. Storing these in
persistent storage would not be compatible with a Device Firmware
Upgrade (DFU) solution.
Fixes: #21798
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the gatt_sub_add function to be similar in structure to how
find_cf_cfg is implemented. This is so that a subscription can be added
without an active connection.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Flag name usb_dev.configured is misleading as it does not
mean the device is configured. This flag indicates whenever
endpoints for the device were enabled. For all classes
except for audio endpoints are enabled on set_configuration
request. This sets the configured flag true. For Audio this
will never happen as what enables audio endpoints is
set_interface request. Without this patch audio samples
will STALL all interface requests.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Currently updatehub trust on MCUboot to test a new image. The process
is executed on next boot after a validate the downloaded image. To
have a more reliable system, is recommended run the SHA-256 algorithm
to attest that firmware was properly stored on the flash memory. This
implements the use of flash_img_check to achieve that, and as a
consequence, add a new level of trust that avoids an useless reboot
on the system.
Updatehub uses two SHA-256 verification. One is used to check the
data stream at download. The second one, realise the verification
reading from flash. Users have the possibility to chose only one
option or keep both verifications. However, it is adviced keep
always both verifications enabled to get consistent reports on
back end.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Currently SHA-256 uses a temporary hash digest to calc final sha sum.
This moves temporary variable from local scope to updatehub context.
The motivation is to use the hash digest on future flash validation.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Remove the BT_LL_SW_SPLIT dependency for
BT_CTLR_DEBUG_PINS_CPUAPP when building CPUAPP application
that is using Zephyr BLE HCI controller on the CPUNET core.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When the connection is terminated, make sure that any pending
data is feed to the application.
Fixes#28057
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add handling of the HCI_Hardware_Error event to log the hardware code.
This event was unmasked in set_event_mask.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a name to the Kconfig choice that selects the controller TX power.
This allows board `*.defconfig` files to change the default TX power
as their certifications warrant. For example:
```
choice BT_CTLR_TX_PWR
default BT_CTLR_TX_PWR_PLUS_4
endchoice
```
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Preserve the TX power set with the `BT_HCI_OP_VS_WRITE_TX_POWER_LEVEL`
command for advertising and scanning procedures. As the TX power is no
longer overwritten on procedure start, the TX powers can now be set
before starting the procedure. This eliminates the chance for the first
transmissions to use the default TX power instead of the request TX
power.
Similar changes are not made to the connection advertising powers as
changing the TX power for a connection to device A should not change
the TX power for a future connection to device B using the same
`struct lll_adv` instance.
Fixes#27921.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
ADI field is optional in AUX_SCAN_RSP so by default it's disabled, but
now we'll have an option to include it.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
When aux is upated, DID is changed and unlike SID it's only stored in
aux PDU. To allow quick access to new DID value, let's just optionally
return current ADI value after aux was updated. It will be useful e.g.
when updating scan response data if we want to put ADI there.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This enables processing of AUX_SCAN_REQ and sending back AUX_SCAN_RSP
on non-connectabe scannable advertising instances. Similar path will
be used for AUX_CONNECT_REQ so there are few references for connectable
as well, but this is not supported as for now.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This adds restrictions for setting scan response data as specified by
Core spec:
* on legacy, only complete data can be set
* on legacy, data cannot be longer than 31 octets
* on ext, if non-scannable, data can only be discarded
* if ext enabled, only complete data can be set
* if ext enabled, data cannot be discarded
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
This allows to set scan response data using ext adv commands.
New AUX_SCAN_RSP can be created without analyzing previous PDU since
the only value that need to be copied from previous PDU is AdvA which
is placed at fixed location. TxPower is omitted since, if enabled, it
is already present in AUX_ADV_IND and does not need to be presed in
other PDUs. ADI support is to be added later.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
AdvA in aux is mandatory for any connectable and scannable set so make
sure it's always added.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Connectable and scannable instances always have aux so we need to force
AuxPtr to be included in primary PDU and have aux allocated even if no
data are set.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Connectable and scannable instances always have AuxPtr so we can return
error immediately if controller is configured with no aux.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Prevent redundant collision resolves and potential incorrect and harmful
increment of lazy_current.
During collision scenarios with high CPU load, the ticker_worker may be
called a second time before the ticker_job gets to run. This will cause
ticker operations on the previosly expired node (expected), and in some
cases increment lazy_current, even though the node was not sceduled to
execute via the req/ack mechanism.
By moving the request check before collision resolve, CPU time is saved,
and lazy_current will not incorrectly be incremented if node is in
collision.
The problem may be seen as a connection suddenly not receiving packets,
or MIC error on master, because the event counter goes out of sync.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Use a helper config BT_CTLR_CONN_RSSI_SUPPORT so that it is only
enabled when supported by the controller.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
This commit extends USB hid API callbacks by adding
'const struct device *dev' parameter. If the application
configured more than one HID device then it must specify
separate hid_ops for each device as its unable to determine
for which device the callback was called.
This patch makes it possible to have only one hid_ops within
the application and the application is aware for which device
the callback was called because of explicit device pointer.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commits introduces check for standard interface and endpoint
requests. Not all requests shall be accepted. In particular those
which addresses not existing interfaces/endpoints should be STALLed.
This patch STALLes incorrect requests.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Those APIs are used for deleting appkey, unbinding an application
from SIG model, unbinding an application from vendor model on the
target node, with matching shell command.
Signed-off-by: YanBiao Hao <haoyanbiao@126.com>
Fix for a problem in current lwm2m firmware object implementation.
Transfer should not begin when an empty string is received.
Signed-off-by: Marin Jurjevic <marin.jurjevic@hotmail.com>
Some implementation consist of multiple libraries to be linked instead
of one. Added possibility to pass multiple libraries. Additionally
renamed the config name as it was stateing something different than it
does.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
