Add CDC Ethernet Emulation Model function driver. This usb network
function can be used for ethernet over USB. Ethernet packet are
encapsulated within EEM packets. An EEM pkt contains 2-byte header
and 4-byte sentinel (or crc).
Note that EEM packets can be split across USB packets but shall not
be split across USB transfers.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Consider media connected when interface is selected by the host and
disconnected on device diconnection.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
This allows creation of virtual lan (VLAN) networks. VLAN support is
only available for ethernet network technology.
Fixes#3234
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_eth_get_hw_capabilities() calls .get_capabilities() which is part
of the ethernet API but not the net_if_api that netusb implements.
This causes a fault as .get_capabilities() was past the end of the
struct and resolved to a random address.
Also, make the API const and give it a unique name.
Signed-off-by: Michael Hope <mlhx@google.com>
This fixes a bug in the cdc_ecm Ethernet over USB driver. The ECM
spec (section 3.3.1) says that the end of an Ethernet frame is marked
using the USB short packet mechanisim, where the last packet is less
than the maximum packet size. If the Ethernet frame is a multiple of
the USB maximum packet size then a final zero length packet must be
sent.
Linux however sends a one byte packet (usbnet.c:1393) to work
around hardware issues with zero length packets.
The current Zephyr driver works most of the time except when you send
an Ethernet frame of the right length where the last byte is zero,
such as:
$ ping 192.0.2.1 -s 23 -p 0
Zephyr then drops the last byte, creating a short frame which gets
dropped higher up in the stack.
Signed-off-by: Michael Hope <mlhx@google.com>
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of accessing the environment variable ZEPHYR_BASE every time we
require accessing the source code root, use an intermediate variable
that has OS path separators correctly set to '/' to avoid issues on
Windows.
Note: This removes the ZEPHYR_SOURCE_DIR CMake variable. External
applications using that will need to change to use the new ZEPHYR_BASE
variable.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Even if endpoint addresses are configurable by each platform,
it would be better to make the default configuration compatible
with a larger board range.
e.g. STM32 OTG FS device has only four endpoints (0x84 is out).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
Add support for selecting Endpoint numbers and move it under USB
Device Networking menu.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
conf member represents the configuration state of the device.
Change its type from u8 to bool and clean related functions.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
netusb endpoint config is specific to the function (ECM, RNDIS, EEM..).
Move this config to the function interface.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Move class_handler and send_pkt to netusb function interface.
This makes netusb 'function' agnostic.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Today, we support/use only one USB configuration descriptor.
Moreover I assume multi-config support should be managed at
usb core level and not by each class driver.
Let's track one netusb function per netusb instance for now.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
In a case we get packet without fragments return -ENODATA.
The bug was discovered by Coverity.
Fixes#4637
Coverity-CID: 178334
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use documentation defined values for virtual devices MAC addresses in
Zephyr and Host OS.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Ethernet emulation device allows to use networking interface for
interaction with USB endpoints.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
