We should have a max value for sending window so that application
is not able to use all our net_bufs for queueing packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The socket layer expects to receive -ENOBUFS if we do not have
any network buffers so cannot build a network message to be sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is an error, the net_context.c:context_sendto() will
free the net_pkt, so we must not do it here.
This commit fixes this error message:
<err> net_pkt: *** ERROR *** pkt 0x20421908 is freed already
(context_sendto():1672)
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Usually the out-of-memory situation will clear itself eventually,
so if that happens in TCP, then keep the connection running and
let the user to decide what to do next.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we run out of network buffers and cannot send data, and if
we have a blocking socket, then wait until new buffers are
available before returning. As this might lead to deadlock,
wait only max 10 seconds and return ENOMEM if we cannot get
buffers in a reasonable amount of time.
Fixes#28216
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of hardcoded value of 3, use the value from Kconfig file
so that user can tweak the TCP retry count.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use SYS_SLIST_FOR_EACH_CONTAINER_SAFE() macro when searching
the connection list so that we notice if new entries are added
or removed in the list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of forcing the slist node to be first in the tcp struct,
use the pointer to node when accessing the slist. This way we
can change the ordering of fields in tcp struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change so that the caller of lwm2m_init_message is
responsible for generating a message id and remove message id generation
from lwm2m_init_message. Prevents generating a new id when the caller's
intent is to init a message with id 0.
Fixes#28283
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
message id 0 and token 0 have special semantics in the lwm2m engine,
they are used to request generation of new id, mark them as such.
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
Fix the OpenThread initialization to prevent the IPv6 interface to
be enabled when `CONFIG_OPENTHREAD_RAW` is set.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Because the previous commit fixed the destination address check,
we need to handle msghdr (used by sendmsg()) in CAN socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to specifically check CAN sockets here. This also means
that SocketCAN will need to support sendmsg() call too. This will
come in following commit.
Fixes#28229
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The timeout variable in `dtls_rx()` was initialized improperly.
Coverity ID: 214219
Fixes#28161
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The default string representing Sensor Type resource in Generic IPSO
object would not fit into the predefined buffer. Increase the buffer
size and add extra BUILD_ASSERT to detect this situation.
Coverity ID: 214225
Fixes#28164
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The timeout log error message condition in wrong. When the timout
happens the "count == -1" and the condition is invalid.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
When the connection is terminated, make sure that any pending
data is feed to the application.
Fixes#28057
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix for a problem in current lwm2m firmware object implementation.
Transfer should not begin when an empty string is received.
Signed-off-by: Marin Jurjevic <marin.jurjevic@hotmail.com>
Some implementation consist of multiple libraries to be linked instead
of one. Added possibility to pass multiple libraries. Additionally
renamed the config name as it was stateing something different than it
does.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
If we receive a TCP segment with FIN | ACK | PSH flags, then
update the ack values properly.
Fixes#27982
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This new option allows to include `sockets_tls.c` into the build when
socket offloading is enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Given that the offloaded poll handling differs from the poll handling of
native sockets (entire poll function call is offloaded), some
adjustements were needed to make TLS socket work with offloaded poll
calls.
To achieve this, in case socket offloading is used, instead of jumping
directly to the offloaded poll call, a TLS wrapper for the offloaded
poll will be called. This wrapper will do additional checks at the
mbedtls level, to verify that the event is only notified to the caller
when the application data is available (i. e. not to report events
during handshake or when partial data is received, not ready to
decrypt).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Separate TLS sockets implementation from net_context layer. Instead of
calling net_context functions directly, create an underlying TCP/UDP
socket, and call socket functions on it instead. This results in a
simpler design, where we don't need to duplicate specific parts of code
from the native socket implementation. Additionally, this allows to use
a different TCP/UDP stack underneath (i. e. when sockets offloading is
used).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds helper function to verify protocol, which was done in
two different places in the code. The function returns the underlying
protocol information on success.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When connection is closed and we send ACK flag, use proper seq
values so that any data that is still in flight will get acked too.
Currently this assumes that window is still open.
Fixes#27876
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Entropy device, as being unique here, does not need to be passed through
mbedtls and can instead set static locally.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Following are the changes to variable names that are matching
with tag names (Rule 5.7 violations)
In kernel.h, event_type is matching with a tag name in
lib/os/onoff.c. Added a _ prefix to event_type and
also to the macro argument names.
In userspace.c, *dyn_obj is matching with the tag name
dyn_obj in the file itslef. Changed it to dyn
In device.h, device_mmio.h, init.h and init.c,
changed the *device to dev. Except for one change in
init.h
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Add more tests to verify that we discard malformed packets.
In order to simplify the testing, separate message validation to
dns_validate_msg() function in resolve.c. Allow that function to
be called from unit test. This way we can construct invalid DNS
messages in unit test and verify that they are discarded when
needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The ANCOUNT has nothing to do with label count so remove the
original while loop and just go through all the labels until
we have read all of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is not possible with valid DNS messages but is possible if
we receive malformed DNS packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to create SOCK_DGRAM type AF_PACKET socket. This
allows user to send raw IP packets without specifying
L2 (like Ethernet) headers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The steps_removed field must be placed right after root_system_id
so that priority vector comparision can be done in one memcmp()
call. This fixes the best master clock selection algorithm (BMCA).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In 'struct coap_resource' path description:
- the plus symbol represents a single-level wild card in the path;
- the hash symbol represents the multi-level wild card in the path.
This change keeps compatibility with RFC 7252 but allows handling
multiple requests in single function.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added additonal checks in net_ipv6_input to ensure that multicasts
are only passed to the upper layer if the originating interface
actually joined the destination multicast group.
Signed-off-by: Philip Serbin <philip.serbin@lemonbeat.com>
Now that TCP2 is the default stack, make the shell compatible
with both stacks.
Note: net_tcp_foreach is not implemented in TCP2, so related
code depends on TCP1.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
PPP Phase Diagram [1] allows only one way phase change. In current
implementation there is an additional RUNNING phase, which is entered
just after NETWORK phase.
Prevent going back from RUNNING to NETWORK phase when Term-Req was
received, as this is meaningless for overall PPP operation and violates
PPP Phase Diagram property of having one way direction change.
This change also improves Adminitrative Close handling (calling
lcp_close()). This request results in moving into TERMINATE phase. Then
LCP is put down (by calling lcp_down()) and then ppp_link_down() is
called, which so far (before this patch) resulted in moving back to
NETWORK and then to DEAD. Right now (after this patch) we move directly
from TERMINATE to DEAD phase, which is exactly how [1] specifies it.
[1] https://tools.ietf.org/html/rfc1661#section-3.2
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
State Transition Table [1] specifies that Administrative Close should
result in CLOSING state. This is not respected in case of LCP, as
STOPPED state was forced in lcp_close().
Don't force going into STOPPED state in lcp_close() and rely on
ppp_fsm_close() to move to CLOSING state instead.
This patch fixes overall Adminitrative Close procedure and allows to
move back into fully operating PPP connection once again after
Adminitrative Open.
[1] https://tools.ietf.org/html/rfc1661#section-4.1
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Print role information next to port information. Also make
sure that port number is set correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Save some memory and separate common string snippets from larger
strings. In this case "does not match" sub-string is printed by
several warning prints so separate the sub-string from the bigger
string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net: route: Add prefix-based ipv6 multicast forwarding
This adds/reenables the feature of multicast routing/forwarding.
The forwarding decision is based on the added multicast routes
and the new network interface flag:
NET_IF_FORWARD_MULTICASTS.
Signed-off-by: Jan Georgi <jan.georgi@lemonbeat.com>
This patch implements optional authentication phase, which is done
between link establishment and network phases. It is part of LCP option
negotiation to decide whether authentication is needed and which
protocol will be used. For now we add only PAP support and try to
negotiate it when some other protocol (e.g. CHAP or EAP) is proposed
earlier. For simplicity reason we only add one way authentication
support, which means that we try to authenticate to the other peer, but
do not require authentication from it.
This is an important step to make PPP work with cellular network modems,
because most of them require to provide username and password within PPP
authentication phase. Those credentials are used by modem to login to
cellular network. In most cases however it is enough to provide dummy
values, because they are not verified. For this reason and simplicity of
this patch we hardcode PAP Peer-ID and Password now.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This module had only some header includes, without actual code. Remove
it, as it is better to create one module per authentication protocol
anyway.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add enums of PAP, CHAP and EAP authentication protocols. Also add their
string representations, so they will nicely show up in logs during
debugging.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Interpret -EINVAL return value from options' parse() callback as "option
value is not supported". After receiving such value nack() callback will
be executed in order to put supported value in the response.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Given the comment in `ipv6_event_handler`, the init function shall wait
for the last added IPv6 address to be confirmed with DAD. This is
contrary with current logic, which will only wait for the first address
to be confirmed.
This commit adds a break statement in the loop, not to overwrite the
recent address to verify with an older one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When verifying the parameters check NULL value separately.
This will avoid nasty warning message to be printed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add function pointer to vtable and use that directly instead of
routing via ioctl() call. This is done as we are trying to get
rid of ioctl() calls in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not route close() calls via ioctl() as that is error prone
and quite pointless. Instead create a callback for close() in
fdtable and use it directly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of casting struct in6_addr, sin6_addr member is now used
directly, like in every other instance of calling net_ipv6_is_prefix().
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This macro has no use in code and was most probably replaced by
FSM_TIMEOUT (which resolves to CONFIG_NET_L2_PPP_TIMEOUT) with the same
default value.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Those macros are not used anymore after commit 35a2519091 ("net: l2:
ppp: add generic function for handling Conf-Req"), because we no longer
need preallocated table on stack for parsing option information.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This option is not used after commit 50b2cafc42 ("net: l2: ppp: use
net_pkt API for replying to Configure-Req") has been applied. We don't
need to preallocate table on stack for parsing option information, so
information about maximum number of supported options is useless.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This commit allows let build zperf sample with overlay-netusb.conf.
USB subsystem must be enabled by the application.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
For platforms using non-native stacks, net_tcp_init() should be
compiled out, similar to how it is done in tcp_internal.h.
Fixes#27463
Signed-off-by: Vincent Wan <vwan@ti.com>
Instead of just showing network interface pointer, print also
network interface index. This helps debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OT_RADIO_CAPS_SLEEP_TO_TX was added as a radio capability
for ieee802154 radio. Waiting on RX state before transmission
is alternative condition to OT_RADIO_CAPS_SLEEP_TO_TX support
as it was a result of OpenThread architecture and is actually
not needed in the Zephyr. Such change lets to start transmission
faster and lower SED device power consumption in active state
about 30%.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Enable the new TCP stack as a default one in order to get people
to use it before Zephyr 2.4 is released.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Zephyr platform does not support MAC retransmissions on its own,
so OT_RADIO_CAPS_TRANSMIT_RETRIES capability was removed.
It should not be enabled basing on IEEE802154_HW_CSMA support,
as these are quite seperate features. Current implementation
assumes that platform performs retransmissions on its own,
what is not provided and leads to lack of MAC retransmissions.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Allow user to enable CONFIG_NET_PKT_TXTIME and
CONFIG_NET_PKT_TXTIME_STATS at the same time. This will increase
memory consumption but as the CONFIG_NET_PKT_TXTIME_STATS is
only meant to be enabled for debugging purposes this overhead
can be accepted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In TCP, we increase the net_pkt refcount in order to resend
it later if we do not receive ACK in time. Because we are not
getting a new net_pkt, the TXTIME statistics would be calculated
incorrectly. So if we re-send, reset the net_pkt creation time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add extra net_pkt RX timing information to "net stats" command.
You neeed to enable CONFIG_NET_PKT_RXTIME_STATS and
CONFIG_NET_PKT_RXTIME_STATS_DETAIL config options.
The "net stats" command will print something like this:
Avg RX net_pkt (7) time 459 us [0->23->16->257->160=456 us]
The extra stats is the end of line inside brackets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add extra net_pkt TX timing information to "net stats" command.
You neeed to enable CONFIG_NET_PKT_TXTIME_STATS and
CONFIG_NET_PKT_TXTIME_STATS_DETAIL config options.
The "net stats" command will print something like this:
Avg TX net_pkt (5867) time 82 us [0->33->20->27=80 us]
The extra stats information is the end of line inside brackets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect information how long net_pkt has travelled in IP stack
in certain points. See network documentation what these points
are and how to get information about the timings. This initial
commit adds support to TX timing collection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_NET_CONFIG_INIT_TIMEOUT should not only be available if
CONFIG_NET_CONFIG_AUTO_INIT=y. If *_AUTO_INIT=n then application
may wish to initialize net manually and still use configured
timeout.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
If the CONFIG_NET_CONFIG_AUTO_INIT is not set, then let application
to do the initialization manually. In that case the app should call
net_config_init_app() when it is ready to setup the network.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Include directories for ${ARCH} is not specified correctly.
Several places in Zephyr, the include directories are specified as:
${ZEPHYR_BASE}/arch/${ARCH}/include
the correct line is:
${ARCH_DIR}/${ARCH}/include
to correctly support out of tree archs.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The original return type of tcp_data_get() was unsigned and the
return value <0 was not checked properly.
Fixes#25723
Coverity-CID: 210559
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LwM2M server might modify the lifetime value while the device is
registered, hence it's needed to obtain the value directly from the
Server object instance, before each Register Update.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A proper way to match a Security object instance with a Server object
instance is via Short Server ID resource. Both coupled object instances
should carry the same value of this resource in order to me considered
matched.
This was not implemented in the LwM2M library and it was incorrectly
assumed that the Security object instance index corresponds to the
Server object instance index. While such apporach works is simple
scenario, it might yield incorrect results when bootstrap is used.
Fix this, by verifyng the Short Server ID resource in the Secuirty
instance used, and finding a matching Server instance. The server object
instance is stored for future use in the engine.
Additionally, remove an extra Server object instance that was created
when the bootstrap procedure was used. Since the boostrap Security
object instance does not have the corresponding Server object, it's
enough to have a single Server instance.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove the static buffer for TCP options. Make sure that the
options were read properly to temp buffer.
Fixes: #25729
Coverity-CID: 210056
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Currently, OpenThread builds produce warning from the OT logger module,
because we don't use one of the parameters provided by logger macro.
Explicitly mark the parameter as unused to prevent warnings being
thrown.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Drop unused ppp_parse_options_array() function and 'struct
ppp_option_pkt' data type. Both were used in initial PPP implementation,
but are not longer needed after recent PPP refactoring.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Introduce new ppp_config_info_req() function that can be used in order
to handle options received within Conf-Req packet. As an input it takes
array of supported options. If received Conf-Req packet contains unknown
options, then a Conf-Rej packet is automatically generated with all of
those options. If all of received options are supported, then function
continues to parse each provided option individually by calling option
specific callbacks.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use a generic handler for received options in Conf-Rej packet. This will
mark all those options as rejected, to they will no longer be included
in subsequence Conf-Req packets.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use a generic handler for received options in Conf-Rej packet. This will
mark all those options as rejected, to they will no longer be included
in subsequence Conf-Req packets.
This allows to communicate with PPP peers, which do not support DNS1 and
DNS2 options.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far there was no generalized way how to handle negotiation of "my
options" (those sent with Conf-Req packet to peer). Peer response for
proposed options and their values were not tracked in any way, so
rejected (by peer) options were sent over and over again in subsequent
Conf-Req packets. In case of IPCP it means that all sent options such as
IP_ADDRESS, DNS1, DNS2 were mandatory for being supported by peer in
order to successfully finish negotiation. For example if 'pppd' was the
configured peer (e.g. when using with QEMU and net-tools scripts),
without ms-dns being configured (which is the default), then "my
options" negotiation failed.
Introduce generalized mechanism for negotiating "my options", so it is
easier to maintain current set of supported options and easily add new
options to the implementation in future. FSM instance inititialization
function can provide information about supported "my options".
Information is is passed as a table of 'struct ppp_my_option_info'
containing:
* option code (type),
* callback for adding option to Conf-Req packet,
* callback for received Conf-Ack with that option,
* callback for received Conf-Nak with that option.
Store also runtime information about each negotiated option. First of
all remember which options have been rejected, so they are not sent to
peer once again in the next Conf-Req packet. This will solve issue with
IPCP negotiation when peer doesn't support DNS1 or DNS2 options. Keep
also track about which options have been acked, so such information can
be verified before bringing FSM instance up.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Rework implementation of ppp_parse_options() to be more generic and
flexible to use. Pass callback and user data for parsing each option
separately.
Keep old functionality of ppp_parse_options() accessible via
ppp_parse_options_array() function. This will make sure that old code
using this function doesn't need to be changed now. There are plans
however to remove ppp_parse_options_array() once there are no more users
of it in future.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use net_pkt API to assemble Configure-Req messages. Compared to net_buf
API it allows us to simplify code.
Remove append_to_buf() helper functions, as their functionality is now
totally replaced by net_pkt API. Additionally net_pkt API handles data
that wraps several net_buf packets, which was not the case with
append_to_buf().
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use net_pkt instead of net_buf API for replying to Configure-Req. We use
the fact that for now we reply with either Configure-Ack or
Configure-Rej only. In both cases we can allocate net_pkt ahead, because
we know its maximum length (which is equal to length of received
Configure-Req packet).
Make also an improvement in generic FSM code and reply with
Configure-Rej to all Configure-Req for which there is no config_info_req
callback set. Use that to drop LCP specific Conf-Req handling code,
because there is no option properly supported there yet.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far ppp_parse_options() has returned enum net_verdict. This type was
never used directly by network stack. Instead, caller was always
checking for NET_OK and returning error code in case of failure.
Change implementation of ppp_parse_options(), so it returns error code
in case of error and 0 when succeeded. This better fits its generic
purpose.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There is no allocation in ppp_l2.c file, which mean that
BUF_ALLOC_TIMEOUT macros is not used anywhere. Drop it.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Make sure that only those threads that have been granted access
to net_if objects, can call the functions that modify net_if data.
The CONFIG_NET_IF_USERSPACE_ACCESS config option is also removed
as it is no longer needed after this change.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make net_if a kernel object with type K_OBJ_NET_IF so that we
can restrict access to it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There was a race condition when ppp_fsm_open() was called in CLOSED
state. Conf-Req was sent first, then state was changed to
REQUEST_SENT. In the meantime however we have already received Conf-Req
to which we responded with Term-Ack.
Change state before sending Conf-Req, so we handle Conf-Req from peer
properly instead of dropping it.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
OpenThread API is not thread safe, therefore it shall be protected
from being preempted by OT thread, or other thread issuing API calls.
The problem showed up after a recent OpenThread upmerge, where changes
in the Joiner class made this problem visible. W/o extra protection,
`otJoinerStart` call can be preempted by the OT thread, leading to an
unexpected behavior.
Introduce new function to allow to lock any API operations for others.
Anyone willing to call OT APIs, shall lock the mutex first to get
exclusive access to the stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`otLinkRawSetEnable` was removed and Link Raw mode is now enabled with
`otLinkRawSetReceiveDone` which requires to register a callback
function. Since it makes little sense for OT L2 to register a Link Raw
callback in current setup, leave it up to the application to register
the callback.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bugfix: in tcp_conn_unref(), the conn was zeroed before removing it
from the connection list (tcp_conns).
Zeroing conn, results in zeroing its 'next' member,
which in effect removes all its following connections referred to
in tcp_conns linked list.
The solution is to move the memset() after sys_slist_find_and_remove().
Signed-off-by: David D <a8961713@gmail.com>
The network interface check was invalid when IPv6 Router
Solicitation message was timeout and interface was not found.
This is highly unlikely but needs to be checked properly.
Fixes#27145
Coverity-CID: 211511
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently, the application could receive a duplicate CONNACK event, in
case the server rejected the connection at MQTT level (with an error
code provided with CONNACK message). A subsequent connection close (with
`mqtt_abort` for instance) would produce the duplicate event.
Fix this by reporting back to the MQTT engine, that the connection was
refused, so it can close the connection rightaway. Rework the event
notification logic, so that DISCONNECT event instead of a duplicate
CONNACK event is notified in that case.
Also, prevent the MQTT engine from notyfing DISCONNECT event in case of
socket errors during initial connection phase (i. e. before
`mqtt_connect` function finished).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
is_init field is useless, because there is only single code path that
always sets it to true before using it.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Make sure IPv6 address is removed from network interface in IPV6CP
protocol down handler. This makes sure that application can receive
high-level notification about missing network connection.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Make sure IPv4 address is removed from network interface in IPCP
protocol down handler. This makes sure that application can receive
high-level notification about missing network connection.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Added the 'fall through' comment to switch to quiet compiler
and coverity warnings.
Fixes#25724Fixes#25726
Signed-off-by: David Leach <david.leach@nxp.com>
To allow hardware crypto acceleration custom mbedtls library needs to be
prepared. However current implementation forces the default library to
be used.
This patch allows not using the default library and passing custom
mbedtls target to use with openthread.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
The TCP2 stack does operations directly on the packet data which may
or may not be aligned. The unaligned access causes a fault on the
Cortex-M0+ so use the UNALIGNED_* macros instead.
Signed-off-by: Michael Hope <mlhx@google.com>
Putting data to local buffer before transmission was removed
to optimize operation. Local buffering was not needed, as passed
buffer cannot be modified until sending is finished.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Currently, functions for poll sock_fds array management are buggy, in
case there is another socket open (for instance the socket for firmware
update download), it could get overwritten, if the LwM2M socket was
closed and re-opened in a meantime (e. g. on registration timeout).
Fix this, by appending new entries to the sock_fds in continuous manner.
In case of removal, the deleted entry is overwritten by the last one,
and the last one is cleared.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During FW update, the application expects a consecutive data stream.
Therefore retransmitted blocks shall not be forwarded to the
application, but ignored. In case blocks are received out of order,
return an error and do not handle this block.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When FW update in PUSH mode is used, the firmware is encapsulated in the
TLV as an opaque data, according to the LMWM2M satandard, and then
sliced into blocks and transferred block by block in several
transactions. Therefore, the TLV header is only present in the initial
message.
Current implementation did not handle this case well, reporting errors
on consecutive blocks, therefore making the FW update in PUSH mode
broken.
This commit fixes this issue with following changes:
* The TLV is only assumed to be present in the initial block, while
consecutive blocks will be processed directly into the appropriate
handler,
* 32-bit variables shall be used whenever dealing with the opaque data
length, since the firmware size can easily exceed the 16-bit range,
* Additional information, required for the FW block transfer to work
properly were added to the block context structure,
* The application shall only be notified of the actual data length, and
not the total block size (the total TLV size including header).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When the dupplicate address detection mechanism is not used, we should
not wait for IPv6 address configuration. Because of the bug we are
waiting for it, when CONFIG_NET_CONFIG_MY_IVP6_ADDR is not set.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Remove the `sm_bootstrap_reg_done` function, which produced duplicated
logs. The bootstrap registration done event is already logged on state
transition. Additionally, in case bootstrap procedure took longer time,
the duplicated log message was printed on each `lwm2m_rd_client_service`
call (500 miliseconds by default).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The security object instance used should be cleared on engine reset,
otherwise we might end up using invalid object instance for the
registration (i. e. if the engine was restarted during the bootstrap
procedure due to socket errors, the registration attempt will use
bootstrap security object instead of finding a proper one).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
During the bootstrap procedure, when Boostrap Finish was received, the
response message was not initialized properly, resulting in a socket
error (NULL pointer porovided) and the response not being sent.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Z_STRUCT_SECTION_ITERABLE() provides an alignment so remove
the 32 byte alignment for net_if and ppp_protocol_handler structs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use system provided Z_STRUCT_SECTION_FOREACH() and
Z_STRUCT_SECTION_ITERABLE() macros instead of manually coding
everything for network sections.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Different switch was used for build to allow including all shim body
in zephyr without the need for building openthread from this repo. This
allows developer to include custom OpenThread sources as part of the
application.
This change is needed as Thread is a subject of certification and
sources provided by zephyr may not necesairly pass certification or be
precertified. User is allowed to use certified OpenThread version
this way.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Fix compilation error when the DIAG module is enabled.
All core functionalities are provided.
Signed-off-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
When this happens, ip6_addr_cb and ipv6_addr_event_handler() both look
unused, since they are passed to macros which discard them.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
In order to implement a blocking connect, add a semaphore
and block on it in net_tcp_connect().
The semaphore is released when ESTABLISHED state is reached.
In case tcp_conn_unref() is called while waiting on the semaphore,
defer the unreference, tcp_conn_unref() will be called from
net_tcp_connect().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to improve readability, refactor and simplify
the control flow in net_tcp_connect().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order for events to be correctly interpreted in SYN_SENT,
check for SYN and ACK simultaneosly.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
net_tcp_put() can be called before ESTABLISHED state
is reached, send FIN only in ESTABLISHED state.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Single work object for whole fsm was not being able to handle more than
single packet at a time. Because of that we have overwritten already
scheduled packets, resulting in fsm timeout and net_pkt leak.
Use net_pkt work object instead, so we can safely schedule more than a
single packet.
This commit also drops workaround for qemu_x86 unit testing.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Current implementation of net_ipv6_send_rs() uses
net_ipv6_addr_create_ll_allnodes_mcast() for creating RS packet.
As result we send RS packet to all-nodes destination [FF02::1],
but RFC4291 requires all-routers destination [FF02::2] for RS packets.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
`addrlen` parameter is updated on each `recvfrom` call, indicating the
actual address length returned. In case both, IPv4 and IPv6 are used on
different sockets (i. e. on regular LWM2M socket and FOTA socket), the
returned address length will differ.
In case `from_addr_len` is not reinitialized on each iteration, the
value stored in the `from_addr_len` variable will eventually indicate
the smaller IPv4 address size, therefore resulting in a failure in a
consecutive call on an IPv6 socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Although LwM2M engine uses cooperative threads, the internal `send()`
implementation might trigger context switch when it calls a kernel
function, therefore resulting in `send()` call being entered from both
the LwM2M thread and the retransmit work.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently there is a single function that handles both Configure-Ack and
Configure-Rej messages. This is obviously wrong for Configure-Rej,
because implementation applies options received in the message.
Remove Configure-Rej callback, so those frames are simply ignored for
the time no valid handling code exists.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Clear negotiated options in protocol down handler. That way all
addresses are properly requested (by sending 0.0.0.0 in Configure-Req)
in the subsequent option negotiation phases.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The context should only clear messages it owns, not all of them. Since
both context (LwM2M and FOTA) share common message pool, they might
interrupt their operation otherwise (i. e. cancel retransmissions).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The FOTA socket was not closed when download finished or an error
occured.
Additionally, fix the socket fd verification (it was assumed 0 is not a
valid fd which is not correct).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In function z_vrfy_net_addr_pton(),
the final copy should be to 'dst' variable not to 'src'
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
In case unsopported TLV type or malformed packet is received, the
`do_write_op_tlv` function will end up in an infinite loop. Prevent that
by returning an error code in case it does not recognize TLV type.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There is already a variable 'network_protos_up', which stores number of
network protocols being up. Additionally each network protocol has its
own state represented by is_ip{,v6}cp_up. Use the latter in FSM up() and
down() callbacks.
This fixes a case when both IPCP and IPv6CP protocols are going
down. When using ctx->is_network_up only one of them (the first) was
deinitialized correctly, second stayed always up (at least partially,
e.g. not calling ppp_network_down()).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Each PPP packet sent on wire needs to have at least 4 bytes length. Set
that length for outgoing Term-Req and Term-Ack packets. Also update
length validation to check for at least 4 bytes instead of at least 1
byte.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
It fixes #issues/26220.
openthread_start function is called when L2 enable(iface, true) is
called. openthread_stop is called when L2 enable(iface, false) is
called. openthread_stop makes the device to leave the OpenThread
network.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
OpenThread BR can assign addresses via DHCPv6 or when acting as an
NCP, addresses can be added manually. Currently, those addresses are
handled in the same way as auto-configured addresses.
This patch maps the newly introduced mAddressOrigin of otNetifAddress to
Zephyr's net_addr_type.
This way an application can register a handler and differentiate by type
of assignment:
```
static void handler(struct net_mgmt_event_callback *cb,
u32_t mgmt_event,
struct net_if *iface)
{
if (iface->config.ip.ipv6->unicast[i].addr_type == NET_ADDR_DHCP) {
}
}
```
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Some options were available in the options.cmake but were not reflected
in Kconfig.
Added possibility to enable additional configuration options for OT.
Some of the options were left commented out as those options are not
yet supported e.g. require Thread 1.2 or require shim changes.
As openthread has gazillion configuration options that are passed as
define value, created generic option for passing any number of those
values separated with space.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Currently user needs to specify quite much additional options to enable
OpenThread support. He also needs to set ip address count,
heap size, etc depending on features enabled.
Nade changes to automatically select/set some of the options on
enabling OpenThread
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Both ASYNC_CTRL_CHAR_MAP and MAGIC_NUMBER are not supported right
now. Send Configure-Reject for them instead of Configure-Nak, as we
don't even propose new values in reply (which should be part of
Configure-Nak).
Send also Configure-Reject for MRU option, as we don't respect it
either.
Drop both count_rej and count_nack, as we can rely solely on nack_idx to
send Configure-Reject or not.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
If we have multiple network interfaces and we are waiting incoming
network packets, make sure to honor the bind of the socket so that
correct socket will receive data in certain network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The sync receive timeout was using invalid value (nanoseconds
instead of milliseconds). This caused unnecessary state switches
from SLAVE to MASTER and back.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add debug prints when the port announce information state
machine state changes. This is useful in debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The port number is stored starting from 0 in Ethernet context.
But in gPTP, it is an index which starts from 1. So increase
the value by 1 for a value returned from Ethernet context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It may be useful for the application to register its own callback for
ot state changed event which does not override the current one.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
It may be useful to start openthread manually but with default
network settings. For instance when the application wants to register
ot state changed callback which should be done before openthread
starts.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Allow to configure, how long before registration timeout should the
Registration Update be sent. The fixed 6 seconds used so far, might
not be enough in slower networks (like NB-IoT), resulting in frequent
re-registrations at LWM2M level.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread API is not thread-safe.
Moved creation of otMessage to the Thread task and created api
for passing it properly.
This way it should be less possible for an issue to occure eg.
during message buffer allocation.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
ppp does not populate the lladdr fields in the received packet.
To enable routing for packets received on the ppp interface, the check
of the link layer addresses in the packet must be skipped.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Added automatic strdup for RAM %s parameters. Postponed format
processing to idle time. Automatic parameters counting during
compilation. Very fast execution for up to three parameters.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
This is no longer required since drivers implementing the sockets
offload interface were migrated to use pure zsock_ instead of
raw POSIX types and functions.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
A net context in LISTENING mode waits for incoming connections, once
a new connection is established a new net context is spawned which
is responsible for handling the new connection.
Therefore when closing a LISTENING context it is not useful to send FIN
as it is never connected. Actually closing the connection would be done
by calling close on the spawned net context which is returned by the
accept call.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Currently there is chosen the link local address as a source address
for each multicast destination address. It is a bug for OpenThread
network where the mesh-local EID addres should be picked in this case.
This commit fixes it by distinquish the mesh local multicast among any
others.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
With timeout==0 count is set to 0 as well and then it is decremented to
-1. It is later checked == 0 and continues to decrement and loop.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Under Linux when you shutdown a socket which is blocked on
an accept call the error code returned by accept is EINVAL.
Modify the socket code to be inline with this behaviour.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
When closing a listening socket the functions waiting on the
FIFO will be unblocked this will result in receiving a NULL child
context. If that is the case return an error instead of carrying on.
Return the same error code (EINVAL) that is returned on Linux when
calling shutdown on a blocked accept call.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
In case CoAP packet does not carry payload, and the last option is
zero-length, the option structure was not filled with data (opt number
and length). Fix the length check to prevent this from happening.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This should be boolean according to specification. It makes difference
when JSON encoding is used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Avoid null pointer access by checking that Ethernet device has
PTP clock before trying to get the actual PTP clock device.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
So far net config initialization code relied on number of services
needed by application. This was fine as long as all enabled
services (e.g. CONFIG_NET_IPV4=y, CONFIG_NET_IPV6=y) were selected by
project configuration as "needed" (e.g. CONFIG_NET_CONFIG_NEED_IPV4=y,
CONFIG_NET_CONFIG_NEED_IPV6=y). Problem appeared for example when both
IPv4 and IPv6 were enabled (CONFIG_NET_IPV4=y, CONFIG_NET_IPV6=y), but
only IPv6 was marked as "needed" (CONFIG_NET_CONFIG_NEED_IPV6=y). In
such situation number of required services was equal to 1. When IPv4
setup was completed, this resulted in returning from net_config_init()
function. Application code failed, because IPv6 was still not
functional.
Do not rely on number of services anymore, as it is error prone. Use
flags instead to mark which services are ready. Compare those flags with
the flags passed to net_config_init() (selected in project configuration
in most cases) to decide whether network configuration has completed
already or not.
Also introduce services_notify_ready() and services_are_ready() helper
functions to isolate implementation details from the logic.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
With current design there is single semaphore (called 'waiter') for
wakeing up initialization thread. This thread should then check for
number of protocols that still need to be initialized. This happens now
only when waiting on 'waiter' semaphore times out.
Do not check for k_sem_take(&waiter) return value, as all needed
information about protocols being initialized already is in 'counter'
semaphore.
Fixes: #25358
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add command to register a receive callback to the net_context used for
the TCP connection that is opened with 'net tcp connect'. The receive
callback will simply print the number of bytes received and inform if
the connection is closed. This makes it possible to test both the tx
and rx paths with the net shell.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
It might happen that while we are waiting for the response
to one of our query, we receive a query to resolve another name.
Previously this would make the current name resolution to fail because
only responses were expected to be received.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Any CoAP implementation when use at least block transfer or is a server
side need access some CoAP options as integer values. This add a method
at public interface and defines for block wise operations to avoid code
useless code duplication.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
It add an option to configure openthread thread priority class
by the application if there is a such need.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The SET_ERRNO() macro does nothing if a positive value is provided
to it, and the functions were not returning -1 or setting errno
as expected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
APIs were returning -1 without setting errno if the file
descriptor looked up a null object or there was no function
installed in the vtable. Set to EBADF for this case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Net pkt is added into the ot net list after queued net pkt into
the net_rx which bases on it. It affects in losting net pkt when for
instance ot thread is preemptive.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The eth_stats_update_errors_rx() implicitly assumes that passed pointer
to struct net_if is not NULL.
This is not true for MCUX's eth_rx() (in eth_mcux.c), where we can
execute eth_stats_update_errors_rx() after net_recv_data() returning
-EINVAL because of passed NULL iface pointer.
This change fixes this problem with adding extra check on iface not
being NULL before it is dereferenced.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This change fixes routing for routes when the nexthop is a link-local
address of a connected peer.
The issue was that nexthop was correctly set from the routes, but the
code did not detect that the nexthop address (link local of the pc on
ppp interface) was on the ppp interface, because
net_if_ipv6_addr_onlink() only evaluated the network prefix and not
any other information (like the nbr list).
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This change adds new, optional switch to 'net ping' command - to
be more specific the '-I <iface index>', where the <iface index>
is the number of supported network interface.
One can discover this number from the Zephyr shell after running
'net iface'.
The default interface stays the same - just the switch is added to
override the used interface for 'net ping' invocation.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Cleansession is hardcoded to 1 but some use case might require 0
to make the sessions persistent (ie get messages sent while the
client was offline)
Signed-off-by: Xavier Naveira <xnaveira@gmail.com>
This PR enables the user to configure the maximum command length for
OpenThread's CLI using Zephyr's shell, which is currently fixed to
256 characteres. This limitation was not enough for certain allowed
OpenThread commands, like some variants of 'ot dataset mgmtsetcommand'.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Right now shell pointer is not assigned before doing a scan, so scan
results are printed using printk(). Save shell instance in context, so
results are printed using shell_fprintf(), thus better aligned in the
console output.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The network statistics is stored for each traffic class, but the
collecting function was given net_pkt priority. The priority
must be first converted to traffic class and then the statistics
stored to correct place in the stats array.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some radio drivers need configuration before start-up. Up to now only
the RF2XX drivers allowed this, but other radio drivers need this as
well. In particular for setting EUI64 addresses.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
When `z_get_fd_obj_and_vtable()` function returns NULL (no valid entry
in the FD table for the socket), there is no need for further usermode
checks on the `ctx` pointer, as there is nothing to invalidate in that
case.
Fixes#25990Fixes#25991
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The original sockets system calls used file descriptors which
were actually net_context pointers. For all socket system calls,
any calls from user mode would check if the caller had permission
to use the net context.
This was later changed to not stuff net_context pointers into file
descriptors, but all the permission checking was unintentionally
lost, allowing all threads on the system to
read/write all socket file descriptors in the system at will, with
no way to isolate applications running on the same microcontroller
from each other's network activity.
This patch restores the permission checks on network context objects
for socket system calls that originated from user mode.
The call to z_object_recycle() was never removed from
zsock_socket_internal(); this is again leveraged to grant the
caller who opened the socket permission on the net_context
associated with the returned file descriptor.
To ensure that all socket calls do this checking, all uses of
z_get_fd_obj_and_vtable() have been routed through get_sock_vtable().
Objects have initialization state set and thread permissions
reset to just the caller in common zsock_socket() code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The socketpair file descriptor context objects are heap allocated
and not drawn from a static pool. Register these as kernel objects
when we create them if user mode is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Zephyr running on MPU devices have a different memory model than
process-oriented OSes like Linux and require a method to set
kernel object permissions on a file descriptor's underlying
context object. Add this, and a test to show that it is working.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Used for permission validation when accessing the associated file
descriptors from user mode.
There often get defined in implementation code, expand the search
to look in drivers/ and subsys/net/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Need to use %zd in formatter string for net_pkt_get_len since it returns
a size_t otherwise we get something like:
error: format ‘%d’ expects argument of type ‘int’, but argument
3 has type ‘size_t’ {aka ‘long unsigned int’} [-Werror=format=]
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we are calling sendmsg() without any aux data, then msg_controllen
is 0 and msg_control is NULL. Check these allowed values properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are calling sendmsg() for a connected socket, then msg_namelen
is 0 and msg_name is NULL. Check these allowed values properly.
Also modify unit tests so that we test this scenario.
Fixes#25925
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In this, case is_nonblock is false and will_block is true.
Therefore, we *may* block, and furthermore we *expect* to
block. Checking is_nonblock is, in fact, redundant, and
passing K_FOREVER to k_sem_take() is justified.
Fixes#25727
Coverity-CID: 210611
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Due to new checks in mbedTLS config sanitizer, TLS option can no longer
be left enabled, when TLS is not used. OpenThread needs MBEDTLS_MD_C
and MBEDTLS_CIPHER_C even without TLS being used, so we need an option
to enable them manually.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The Router Advertisement can have prefix option. It's length
is 4 but the code did not check that which meant that we could
accept malformed packet. See RFC 4861 chapter 4.6.2 for details.
Fixes#25694
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that we do not add same IPv6 prefix, received from RA,
multiple times to prefix timer list. This avoids possible
denial-of-service issue if we receive suitably crafted RA packet.
Fixes#25698
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread moved from 4 to 5 debug levels and it was not possible
to configure all of them with Kconfig.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
In order to support the retransmission for the outgoing data:
1. The outgoing data packet is appended to the send_data queue
in net_tcp_queue_data().
2. tcp_send_queued_data() is called and will use tcp_send_data()
to sends queued but unsent data packet by packet
until there's an unsent data and the receiver's window isn't full.
tcp_send_queued_data() subscribes send_data_timer
that will handle retrasmissions with tcp_resend_data().
3. tcp_send_data() peeks a single chunk of data from the send_data
queue that will not exceed the maximum segment size
until the the receiver's window is full.
tcp_send_data() uses conn->seq and conn->unack_len as the sequence
number for the TCP packet.
conn->unacked_len is advanced on each send.
4. On data acknowledgment:
- acknowledged amount of data is removed from the beginning
of the send_data queue
- conn->seq is advanced by the acknowledged amount
- conn->unacked_len is decremented by the acknowledged amount
- send_data_timer is cancelled
- tcp_send_queued_data() is called to send queued but
prevoiusly unsent data
5. On timeout, tcp_resend_data() will reset conn->unack_len,
peek one packet from the beginning of the send_queue and resend,
terminating the connection on retries exceeded.
Meanwhile the outgoing data tcp_send_queued_data() is just
appended to the send_data but not sent.
In case of the acknowledgement, tcp_send_queued_data() will
start sending multiple packets until the receiver's window
is full.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support the retransmission for the outgoind data,
add the following into the TCP connection:
- struct net_pkt *send_data (used as a queue)
- send_data_total
- unack_len
- send_data_timer
- send_data_retries
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support the send window, add send_win into
the TCP connection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support the data retransmission, refactor tcp_out()
into tcp_out_ext() which supports passing the sequence number.
In addition drop modifications of the connection sequence number
from tcp_out_ext(), this is the responsibility of data retransmission.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to use struct net_pkt for the outgoing data queue,
update tcp_pkt_alloc() macros, so they support allocation
without buffer.
Additionally, merge tcp_pkt_alloc() macros macros into one.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Unsuccessfull packet clone in tcp_data_get() isn't handled,
add an error handling and don't ACK the incoming data in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to handle sequence overflow cases, use
net_tcp_seq_greater() to check if the sequence is greater/lower.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The initial sequence number for a connection should be randomized
to prevent easy guesses.
Do not randomize the sequence number if network test or
test protocol is enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
There was a possible race condition between sock_is_nonblock()
and k_sem_take() in spair_read() and spair_write() that was
mitigated.
Also clarified some of the conditional branching in those
functions.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
The link address was not printed correctly as log_strdup() was
missing from the debug print.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print detailed information about a given net_pkt. This is
useful if there is a memory leak and you want to see more
detailed information about the data inside the buffer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Added support for Qemu User Networking and tested with
qemu_x86 model. The support is kept simple assuming that
the TAP interface will always be preferred for more
sophisticated / practical use cases.
QEMU User Networking is implemented using "slirp", which
provides a full TCP/IP stack within QEMU and uses that
stack to implement a virtual NAT'd network. As this
support is built into QEMU, it can be used with any model
and requires no admin privileges on the host machine,
unlike TAP.
Added documentation to facilitate the user.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
The LLDP packet was created but its type was not set to LLDP
and was sent as ARP message.
Fixes#25084
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add OpenThread configuration option, which allows to configure and start
OpenThread stack operation manually. This mode should be used in NCP
devices, as well as is needed for certification purposes, where
OpenTread stack have to be configured by the test framework and not
initialize and join the network on its own.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Frame format was validated, but its length should be also validated
relevantly against the format.
Fixes#24970
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Convert all canbus related API/samples/tests/subsys
to the new timeout API with k_timeout_t.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
If we have removed first net_buf, then we must not restore the
original cursor as that will point to wrong head net_buf.
Add also unit test to check that the packets are removed
properly.
Clarify the documentation that we are removing data from
beginning of the function, also document that the cursor
is reset after this call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace:
DT_FLASH_ERASE_BLOCK_SIZE ->
DT_PROP(DT_CHOSEN(zephyr_flash), erase_block_size)
DT_FLASH_WRITE_BLOCK_SIZE ->
DT_PROP(DT_CHOSEN(zephyr_flash), write_block_size)
As this allows us to phase out the old generator.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adding RFC1350 compliant support for TFTP Client in Zephyr. The
current implementation is minimal and only supports the ability
to get a file from the server.
Things for the future include support for putting files to
server and adding support for RFC2347.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
In order to avoid retransmissions from the peer's side
on full-close, handle states properly.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If net_pkt_pull() would cause an empty net_buf, then unref
those empty buffers from the list.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
So far socket errors reported by poll/recvfrom were ignored, which could
lead to an unexpected behavior when socket was left in an undefined
state.
Fix this, by requesting a re-registration in the LWM2M state machine,
which will close the faulty socket and open a new one. Note, that simply
closing and re-opening a socket in the lwm2m engine would not work,
since this would silently invalidate any open observations on the
lwm2m server side (due to port number change). Triggering a fresh
registration will notify the server to update its observations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
SNTP implementation defined symbols like "MODE_MASK", which can easily
conflict with similary laxly defined symbols in other modules, and
indeed, we hit a case like that (below). So, prefix these symbols
consistently with "SNTP_", until more clear private namespacing
convention are made pervasive in Zephyr.
subsys/net/lib/sntp/sntp_pkt.h:14: error: "MODE_MASK" redefined
include/arch/arm/aarch32/cortex_a_r/cpu.h:17: note: this is the
location of the previous definition
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
On OT network with poor coverage, very often request/observe packets
doesn't get it's ACK and consumes from pendings/replies/message stacks.
In such cases when LWM2M engine tries to recover by resetting its state,
it fails because of lack of free messages.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
In networks with high latencies (like NB-IoT), it's quite common to
recieve duplicated response. It's not an error condition, a correct way
to handle it is to simply ignore the duplicate. Lower the log level for
this event, not to disturb users.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The retaransmission logic was not correct in the lwm2m_engine, and could
lead to faulty behavior in case multiple messages were pending for
retransmission in the queue.
1. Since there is a singe delayed work item for entire retransmission
queue, `coap_pending_next_to_expire` should be called before
scheduling next timeout, to identify which message is going to expire
next (and when). Currently, the engine always set next timeout, based
on timeout from the message being currently re-transmitted.
2. In case the message was re-transmitted several times, and is removed
from the retansmission queue due to a timeout, next retransmission
should be scheduled, in case there are other messages on the queue.
3. Verify the timeout of the earliest message to expire in the
retransmission handler. In case messages from the beginning of the
queue were removed, we might need to schedule the retransmission
again, instead of sending message rightaway.
4. `lwm2m_send_message` is not handling retransmissions anyway, so
there's no need to check send attempts. Instead, verify
retransmission work item is already pending, and update its timeout
if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, coap_pending structure kept track only of the timeout interval
between two consecutive retransmissions. Calculations inside
`coap_pending_next_to_expire` relied only on this value. This approach
gives incorrect results though, in case multiple messages are pending
for retransmission.
For instance, assuming initial retransmission timeout is set to 2
seconds. If some message had been retransmitted already, its timeout
would be increased to 4 seconds. Any new message added to the pending
list would have a retransmission timeout set to 2 seconds, and will be
returned as a first message to expire, no matter how long the initial
message was already on the list.
To resolve this, add a `t0` field to the coap_pending structure. This
field is initialized to the initial transmission time, and is increased
on each retransmission by the retransmission timeout.
`coap_pending_next_to_expire` uses this value to calculate absolute
time, when the next retransmission should take place, and based on this
information returns correctly first pending message to expire.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace DT_FLASH_DEV_NAME with DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL.
We now set zephyr,flash-controller in the chosen node of the device
tree to the flash controller device.
NOTE: For a SoCs with on die flash, this points to the controller and
not the 'soc-nv-flash' node. Typically the controller is the
parent of the 'soc-nv-flash' node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In order to fix the line tracking of the TCP packet allocation
with the test protocol enabled, refactor tcp_pkt_alloc(),
so the line of the allocation can be tracked properly.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The LwM2M stack would previously ignore all OPAQUE resources when
reading them. This meant that it was impossible to read them, even if
there was a custom read callback.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
Some services like DHCHPv4 directly send raw packets to the iface.
This causes issue when the iface does not implement l2, e.g.
because it is a socket offload interface. fix that.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Make sure we only parse the received TCP options only once. Store
the options to tcp conn struct for later use.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch fixes an issue with TCP options reading. Previous approach
was accessing the options with pointers (th + 1). This does not work if
TCP options span multiple net_pkt buffer fragments. Instead net_pkt
functions must be used.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
During registration, first thing LWM2M does is trying to close a socket
indicated by sock_fd stored in its context. In case it is not
initialized to some invalid value (-1 in this case), LWM2M may close an
ambigous socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to avoid retransmissions from the peer's side
on active connection close, acknowledge the incoming FIN+ACK
in FIN_WAIT_1 state.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
We cannot directly use the local address in net_context when
registering the connection as it is not proper type. So create
temp address variable for that purposes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Avoid dynamic allocations and all the issues if we run out of
memory, by placing the connection endpoint directly to TCP
connection struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Bug fix and improved `payload` handling in `http_client_req`.
Changes to `http_client_req` behaviour:
If the user provides `payload_len` it is used to generate the
`Content-Length` header. This is done even if `payload_cb` is used to
provide the actual data. If no `payload_len` is specified then no
`Content-Length` is generated.
If `payload_cb` is provided it is called to send the payload data.
Otherwise `payload` is used as the payload buffer and sent. If
`payload_len` is not zero, it is used as the size of `payload`.
Otherwise `payload` is assumed to be a string and `strlen` is used to
determine its size. This is to maintain current behaviour and not break
existing samples.
Fixes#24431
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
In tcp_endpoint_cmd() we allocate and then almost immediately
destroy the allocated endpoint. This is quite inefficient so
use a endpoint from stack in the compare.
Separate endpoint allocation from value setting so the caller
can decide how the endpoint union values are set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Cell ID resource was not initialized properly in the Connectivity
Monitoring object, making it unusable from the application.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some other part of Zephyr has similar defines (SRC)
causing build failures.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Assigning the allocated IPv4 endpoint as struct sockaddr
leads to the memory overwrite, assign the correct structure,
i.e. struct sockaddr_in.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
There was no way to use Openthread CoAP api in zephyr application so
far. These changes enable the feature. Now you can fully use CoAP
communication in an application working in Thread network.
Signed-off-by: Lukasz Maciejonczyk <Lukasz.Maciejonczyk@nordicsemi.no>
Set information about Frame Pending Bit from the ACK response in the
frame passed to OpenThread.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In order to implement active connection close with the
TIME_WAIT state, send FIN and enter FIN_WAIT_1 state.
We actually send FIN+ACK as most of the implementations do.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to support TIME_WAIT state during the TCP connection
termination, add a TIME_WAIT timer and the corresponding state.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
In order to improve readability, rename TCP_FIN_WAIT
states into TCP_FIN_WAIT_1, TCP_FIN_WAIT_2.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fill the mTimestamp filed in OpenThread frame based on the net_pkt
timestamp value (only if NET_PKT_TIMESTAMP is enabled).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This change is to allow access to the firmware block context in order to
give the firmware update callback implementation an indication of when
to reset the flash context. Additionally, it allows for a validity check
between the total expected size downloaded and the actual size
downloaded. A simple implementation can check if the block context's
current downloaded blocks is equal to the expected block size in order
to determine if the flash context needs to be reset. This approach
seemed the simplest, and knowing the firmware block context can have
other purposes. This has been tested by accessing the block context
during the update in the block received callback and confirming that the
callback had information regarding the current downloaded bytes.
Fixes#16122
Signed-off-by: Kyle Sun <yaomon18@yahoo.com>
Received frames shall be handled in the OpenThread thread, not in
the receiver thread.
Passed received frame to the function that will handle it in a proper
thread instead of calling otPlatRadioReceiveDone directly.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
OpenThread received frame handling shall be done in the OpenThread
thread.
Created API to pass net packets to the proper thread and handle them
there.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
The time parameter cannot be K_NO_DELAY because the time delay
parameter is ms so using value 0 instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_context API will change, the s32_t timeout parameter
will be changed to k_timeout_t. All the Zephyr users of this API will
be changed in subsequent commits. This is internal Zephyr API only,
so the API is not deprecated etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Mention in websocket API documentation that the timeout value
is in milliseconds. Check timeout values properly using K_TIMEOUT_EQ()
macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use k_timeout_t internally, no change to user API.
Clarify the documentation of the timeout parameter that it is
in milliseconds.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 64-bit time in order to avoid overlaps, and do not use K_MSEC()
as that will convert to k_timeout_t which we do not want in this
case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread uses "tx started" notification to start ACK
timeout if the driver does not support it.
In order for this to be achieved tx task needs to run in parallel
to the OpenThread task, otherwise it may delay the gap between
cca and tx or run after transmission has already finished.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
The function calculates the number of octets put, but does not return
it. Call sites check for non-zero values suggesting this is a bug.
See https://habr.com/en/company/pvs-studio/blog/495284/ fragment 12.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use the size of the target buffer as the maximum length when
formatting with snprintf.
See https://habr.com/en/company/pvs-studio/blog/495284/ fragment 3.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This patch enables handling of a single octet of option-kind at the end
of the option list (EOL). Also, add functionality to drop a segment with
an invalid single octet option-kind at the EOL.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
The net_buf subsystem is now fully compatible with the new timeout
API, so move the selection of the legacy API to those specific
subsystems that use net_buf and still need converting.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch updates the net_buf API to use k_timeout_t in essentially
all places where "s32_t timeout" was previously used. For the most
part the conversion is trivial, except for the places where
intermediate decrements of remaining timeout is needed. For this the
z_timeout_end_calc() API is used.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use existing network stack calls to create net pkt,
ip header and udp header creation. Also simplify
finalize api calls.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Use existing network stack calls to create net pkt,
ip header and tcp header creation. Also simplify
finalize api calls.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
net_context local sin/sin6 addresses are used only
when input src is not available. So ASSERT should
be inside if block.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case hardware CSMA CA is used, ieee802154 L2 does not initialize ACK
processing structures, as it does not need to process ACK messages. As
it is not possible to conditionally disable ACK reporting to the upper
layer, ieee802154 could end up using uninitialized kernel primitive
(semaphore) in the ACK handler, which lead to a crash.
Avoid this, by explicitly checking in the ACK handler, if HW CSMA CA is
used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Even though radio driver can report in its capabilities that it does
support CSMA CA, there's no way in the driver to select how the frame
should be transmitted (with CSMA or without). As layers above radio
driver (Thread, Zigbee) can expect that both TX modes are available, we
need to extend the API to allow either of these modes.
This commits extends the API `tx` function with an extra parameter,
`ieee802154_tx_mode`, which informs the driver how the packet should be
transmitted. Currently, the following modes are specified:
* direct (regular tx, no cca, just how it worked so far),
* CCA before transmission,
* CSMA CA before transmission,
* delayed TX,
* delayed TX with CCA
Assume that radios that reported CSMA CA capability transmit in CSMA CA
mode by default, all others will support direct mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implemented blocking OpenThread otPlatRadioGetRssi api function using
no-blocking energy scan function from radio driver api interface.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
