Allow to configure, how long before registration timeout should the
Registration Update be sent. The fixed 6 seconds used so far, might
not be enough in slower networks (like NB-IoT), resulting in frequent
re-registrations at LWM2M level.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread API is not thread-safe.
Moved creation of otMessage to the Thread task and created api
for passing it properly.
This way it should be less possible for an issue to occure eg.
during message buffer allocation.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
Added automatic strdup for RAM %s parameters. Postponed format
processing to idle time. Automatic parameters counting during
compilation. Very fast execution for up to three parameters.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
This is no longer required since drivers implementing the sockets
offload interface were migrated to use pure zsock_ instead of
raw POSIX types and functions.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
With timeout==0 count is set to 0 as well and then it is decremented to
-1. It is later checked == 0 and continues to decrement and loop.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Under Linux when you shutdown a socket which is blocked on
an accept call the error code returned by accept is EINVAL.
Modify the socket code to be inline with this behaviour.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
When closing a listening socket the functions waiting on the
FIFO will be unblocked this will result in receiving a NULL child
context. If that is the case return an error instead of carrying on.
Return the same error code (EINVAL) that is returned on Linux when
calling shutdown on a blocked accept call.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
In case CoAP packet does not carry payload, and the last option is
zero-length, the option structure was not filled with data (opt number
and length). Fix the length check to prevent this from happening.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This should be boolean according to specification. It makes difference
when JSON encoding is used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far net config initialization code relied on number of services
needed by application. This was fine as long as all enabled
services (e.g. CONFIG_NET_IPV4=y, CONFIG_NET_IPV6=y) were selected by
project configuration as "needed" (e.g. CONFIG_NET_CONFIG_NEED_IPV4=y,
CONFIG_NET_CONFIG_NEED_IPV6=y). Problem appeared for example when both
IPv4 and IPv6 were enabled (CONFIG_NET_IPV4=y, CONFIG_NET_IPV6=y), but
only IPv6 was marked as "needed" (CONFIG_NET_CONFIG_NEED_IPV6=y). In
such situation number of required services was equal to 1. When IPv4
setup was completed, this resulted in returning from net_config_init()
function. Application code failed, because IPv6 was still not
functional.
Do not rely on number of services anymore, as it is error prone. Use
flags instead to mark which services are ready. Compare those flags with
the flags passed to net_config_init() (selected in project configuration
in most cases) to decide whether network configuration has completed
already or not.
Also introduce services_notify_ready() and services_are_ready() helper
functions to isolate implementation details from the logic.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
With current design there is single semaphore (called 'waiter') for
wakeing up initialization thread. This thread should then check for
number of protocols that still need to be initialized. This happens now
only when waiting on 'waiter' semaphore times out.
Do not check for k_sem_take(&waiter) return value, as all needed
information about protocols being initialized already is in 'counter'
semaphore.
Fixes: #25358
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
It might happen that while we are waiting for the response
to one of our query, we receive a query to resolve another name.
Previously this would make the current name resolution to fail because
only responses were expected to be received.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
Any CoAP implementation when use at least block transfer or is a server
side need access some CoAP options as integer values. This add a method
at public interface and defines for block wise operations to avoid code
useless code duplication.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The SET_ERRNO() macro does nothing if a positive value is provided
to it, and the functions were not returning -1 or setting errno
as expected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
APIs were returning -1 without setting errno if the file
descriptor looked up a null object or there was no function
installed in the vtable. Set to EBADF for this case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Cleansession is hardcoded to 1 but some use case might require 0
to make the sessions persistent (ie get messages sent while the
client was offline)
Signed-off-by: Xavier Naveira <xnaveira@gmail.com>
This PR enables the user to configure the maximum command length for
OpenThread's CLI using Zephyr's shell, which is currently fixed to
256 characteres. This limitation was not enough for certain allowed
OpenThread commands, like some variants of 'ot dataset mgmtsetcommand'.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
When `z_get_fd_obj_and_vtable()` function returns NULL (no valid entry
in the FD table for the socket), there is no need for further usermode
checks on the `ctx` pointer, as there is nothing to invalidate in that
case.
Fixes#25990Fixes#25991
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The original sockets system calls used file descriptors which
were actually net_context pointers. For all socket system calls,
any calls from user mode would check if the caller had permission
to use the net context.
This was later changed to not stuff net_context pointers into file
descriptors, but all the permission checking was unintentionally
lost, allowing all threads on the system to
read/write all socket file descriptors in the system at will, with
no way to isolate applications running on the same microcontroller
from each other's network activity.
This patch restores the permission checks on network context objects
for socket system calls that originated from user mode.
The call to z_object_recycle() was never removed from
zsock_socket_internal(); this is again leveraged to grant the
caller who opened the socket permission on the net_context
associated with the returned file descriptor.
To ensure that all socket calls do this checking, all uses of
z_get_fd_obj_and_vtable() have been routed through get_sock_vtable().
Objects have initialization state set and thread permissions
reset to just the caller in common zsock_socket() code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The socketpair file descriptor context objects are heap allocated
and not drawn from a static pool. Register these as kernel objects
when we create them if user mode is enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Zephyr running on MPU devices have a different memory model than
process-oriented OSes like Linux and require a method to set
kernel object permissions on a file descriptor's underlying
context object. Add this, and a test to show that it is working.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Used for permission validation when accessing the associated file
descriptors from user mode.
There often get defined in implementation code, expand the search
to look in drivers/ and subsys/net/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we are calling sendmsg() without any aux data, then msg_controllen
is 0 and msg_control is NULL. Check these allowed values properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are calling sendmsg() for a connected socket, then msg_namelen
is 0 and msg_name is NULL. Check these allowed values properly.
Also modify unit tests so that we test this scenario.
Fixes#25925
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In this, case is_nonblock is false and will_block is true.
Therefore, we *may* block, and furthermore we *expect* to
block. Checking is_nonblock is, in fact, redundant, and
passing K_FOREVER to k_sem_take() is justified.
Fixes#25727
Coverity-CID: 210611
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
OpenThread moved from 4 to 5 debug levels and it was not possible
to configure all of them with Kconfig.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
There was a possible race condition between sock_is_nonblock()
and k_sem_take() in spair_read() and spair_write() that was
mitigated.
Also clarified some of the conditional branching in those
functions.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Replace:
DT_FLASH_ERASE_BLOCK_SIZE ->
DT_PROP(DT_CHOSEN(zephyr_flash), erase_block_size)
DT_FLASH_WRITE_BLOCK_SIZE ->
DT_PROP(DT_CHOSEN(zephyr_flash), write_block_size)
As this allows us to phase out the old generator.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adding RFC1350 compliant support for TFTP Client in Zephyr. The
current implementation is minimal and only supports the ability
to get a file from the server.
Things for the future include support for putting files to
server and adding support for RFC2347.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
So far socket errors reported by poll/recvfrom were ignored, which could
lead to an unexpected behavior when socket was left in an undefined
state.
Fix this, by requesting a re-registration in the LWM2M state machine,
which will close the faulty socket and open a new one. Note, that simply
closing and re-opening a socket in the lwm2m engine would not work,
since this would silently invalidate any open observations on the
lwm2m server side (due to port number change). Triggering a fresh
registration will notify the server to update its observations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
SNTP implementation defined symbols like "MODE_MASK", which can easily
conflict with similary laxly defined symbols in other modules, and
indeed, we hit a case like that (below). So, prefix these symbols
consistently with "SNTP_", until more clear private namespacing
convention are made pervasive in Zephyr.
subsys/net/lib/sntp/sntp_pkt.h:14: error: "MODE_MASK" redefined
include/arch/arm/aarch32/cortex_a_r/cpu.h:17: note: this is the
location of the previous definition
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
On OT network with poor coverage, very often request/observe packets
doesn't get it's ACK and consumes from pendings/replies/message stacks.
In such cases when LWM2M engine tries to recover by resetting its state,
it fails because of lack of free messages.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
In networks with high latencies (like NB-IoT), it's quite common to
recieve duplicated response. It's not an error condition, a correct way
to handle it is to simply ignore the duplicate. Lower the log level for
this event, not to disturb users.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The retaransmission logic was not correct in the lwm2m_engine, and could
lead to faulty behavior in case multiple messages were pending for
retransmission in the queue.
1. Since there is a singe delayed work item for entire retransmission
queue, `coap_pending_next_to_expire` should be called before
scheduling next timeout, to identify which message is going to expire
next (and when). Currently, the engine always set next timeout, based
on timeout from the message being currently re-transmitted.
2. In case the message was re-transmitted several times, and is removed
from the retansmission queue due to a timeout, next retransmission
should be scheduled, in case there are other messages on the queue.
3. Verify the timeout of the earliest message to expire in the
retransmission handler. In case messages from the beginning of the
queue were removed, we might need to schedule the retransmission
again, instead of sending message rightaway.
4. `lwm2m_send_message` is not handling retransmissions anyway, so
there's no need to check send attempts. Instead, verify
retransmission work item is already pending, and update its timeout
if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, coap_pending structure kept track only of the timeout interval
between two consecutive retransmissions. Calculations inside
`coap_pending_next_to_expire` relied only on this value. This approach
gives incorrect results though, in case multiple messages are pending
for retransmission.
For instance, assuming initial retransmission timeout is set to 2
seconds. If some message had been retransmitted already, its timeout
would be increased to 4 seconds. Any new message added to the pending
list would have a retransmission timeout set to 2 seconds, and will be
returned as a first message to expire, no matter how long the initial
message was already on the list.
To resolve this, add a `t0` field to the coap_pending structure. This
field is initialized to the initial transmission time, and is increased
on each retransmission by the retransmission timeout.
`coap_pending_next_to_expire` uses this value to calculate absolute
time, when the next retransmission should take place, and based on this
information returns correctly first pending message to expire.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace DT_FLASH_DEV_NAME with DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL.
We now set zephyr,flash-controller in the chosen node of the device
tree to the flash controller device.
NOTE: For a SoCs with on die flash, this points to the controller and
not the 'soc-nv-flash' node. Typically the controller is the
parent of the 'soc-nv-flash' node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The LwM2M stack would previously ignore all OPAQUE resources when
reading them. This meant that it was impossible to read them, even if
there was a custom read callback.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
During registration, first thing LWM2M does is trying to close a socket
indicated by sock_fd stored in its context. In case it is not
initialized to some invalid value (-1 in this case), LWM2M may close an
ambigous socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Bug fix and improved `payload` handling in `http_client_req`.
Changes to `http_client_req` behaviour:
If the user provides `payload_len` it is used to generate the
`Content-Length` header. This is done even if `payload_cb` is used to
provide the actual data. If no `payload_len` is specified then no
`Content-Length` is generated.
If `payload_cb` is provided it is called to send the payload data.
Otherwise `payload` is used as the payload buffer and sent. If
`payload_len` is not zero, it is used as the size of `payload`.
Otherwise `payload` is assumed to be a string and `strlen` is used to
determine its size. This is to maintain current behaviour and not break
existing samples.
Fixes#24431
Signed-off-by: Arvin Farahmand <arvinf@ip-logix.com>
Cell ID resource was not initialized properly in the Connectivity
Monitoring object, making it unusable from the application.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Set information about Frame Pending Bit from the ACK response in the
frame passed to OpenThread.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace CONFIG_ENTROPY_NAME with DT_CHOSEN_ZEPHYR_ENTROPY_LABEL. We now
set zephyr,entropy in the chosen node of the device tree to the entropy
device.
This allows us to remove CONFIG_ENTROPY_NAME from dts_fixup.h. Also
remove any other stale ENTROPY related defines in dts_fixup.h files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fill the mTimestamp filed in OpenThread frame based on the net_pkt
timestamp value (only if NET_PKT_TIMESTAMP is enabled).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This change is to allow access to the firmware block context in order to
give the firmware update callback implementation an indication of when
to reset the flash context. Additionally, it allows for a validity check
between the total expected size downloaded and the actual size
downloaded. A simple implementation can check if the block context's
current downloaded blocks is equal to the expected block size in order
to determine if the flash context needs to be reset. This approach
seemed the simplest, and knowing the firmware block context can have
other purposes. This has been tested by accessing the block context
during the update in the block received callback and confirming that the
callback had information regarding the current downloaded bytes.
Fixes#16122
Signed-off-by: Kyle Sun <yaomon18@yahoo.com>
Received frames shall be handled in the OpenThread thread, not in
the receiver thread.
Passed received frame to the function that will handle it in a proper
thread instead of calling otPlatRadioReceiveDone directly.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
OpenThread received frame handling shall be done in the OpenThread
thread.
Created API to pass net packets to the proper thread and handle them
there.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
The time parameter cannot be K_NO_DELAY because the time delay
parameter is ms so using value 0 instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Mention in websocket API documentation that the timeout value
is in milliseconds. Check timeout values properly using K_TIMEOUT_EQ()
macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use k_timeout_t internally, no change to user API.
Clarify the documentation of the timeout parameter that it is
in milliseconds.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 64-bit time in order to avoid overlaps, and do not use K_MSEC()
as that will convert to k_timeout_t which we do not want in this
case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread uses "tx started" notification to start ACK
timeout if the driver does not support it.
In order for this to be achieved tx task needs to run in parallel
to the OpenThread task, otherwise it may delay the gap between
cca and tx or run after transmission has already finished.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
The function calculates the number of octets put, but does not return
it. Call sites check for non-zero values suggesting this is a bug.
See https://habr.com/en/company/pvs-studio/blog/495284/ fragment 12.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use the size of the target buffer as the maximum length when
formatting with snprintf.
See https://habr.com/en/company/pvs-studio/blog/495284/ fragment 3.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Even though radio driver can report in its capabilities that it does
support CSMA CA, there's no way in the driver to select how the frame
should be transmitted (with CSMA or without). As layers above radio
driver (Thread, Zigbee) can expect that both TX modes are available, we
need to extend the API to allow either of these modes.
This commits extends the API `tx` function with an extra parameter,
`ieee802154_tx_mode`, which informs the driver how the packet should be
transmitted. Currently, the following modes are specified:
* direct (regular tx, no cca, just how it worked so far),
* CCA before transmission,
* CSMA CA before transmission,
* delayed TX,
* delayed TX with CCA
Assume that radios that reported CSMA CA capability transmit in CSMA CA
mode by default, all others will support direct mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Implemented blocking OpenThread otPlatRadioGetRssi api function using
no-blocking energy scan function from radio driver api interface.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
k_sleep() now takes a k_timeout_t so an integer value needs to be
wrapped through the appropriate macro, in this case K_SECONDS().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Verify that `ed_scan` is implemented by the radio driver before use. In
case it's not, return appropriate error code to OpenThread.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Identify when received PUBLISH message is malformed and overall packet
length received is smaller than parsed variable header lenght.
Add unit test to cover this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Verify more strictly that data read from the transport fits into RX
buffer. Switch to unsigned integers, where possible, to prevent
unnecessary signed/unsigned operations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The standard allows up to 4 bytes of packet length data, while current
implementation parsed up to 5 bytes.
Add additional unit test, which verifies that error is reported in case
of invalid packet length.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case OPENTHREAD_NCP option is disabled, uart.c platform driver should
not be compiled as it misses dependencies.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When NCP starts-up some of the initialisation functions of a regular
OpenThread device do not need to be called, because they get triggered
by wpantund via UART. Instead NCP initialisation needs to be called.
A small typo has been fixed as well.
Also initialisation for raw link packet interface has been added. Can be
used for picking up 802.15.4 frames and interpreting them in the
application.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
If the network interface is down, we should timeout properly
and let the application to handle the situation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are receiving UDP packet and if there is some error happening
inside zsock_recv_dgram(), then make sure that the net_pkt received
from recv_q is freed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Contents of mqtt_3_1_0_proto_desc and mqtt_3_1_1_proto_desc were logged
with following code:
MQTT_TRC("Encoding Protocol Description. Str:%s Size:%08x.",
mqtt_proto_desc->utf8, mqtt_proto_desc->size);
This resulted in invalid log, since they were not NULL-terminated
strings. Use MQTT_UTF8_LITERAL() to initialize both utf8 strings to make
sure they are NULL-terminated now and valid to print and
log. Additionally this makes the code a bit shorter.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There are scenarios where there is a NAT firewall in between MQTT
client and server. In such case, the NAT TCP timeout may be shorter
than MQTT keepalive timeout and TCP timeout. The the MQTT ping
request message is dropped by the NAT firewall, so that it cannot be
received by the server, resulting in void MQTT ping response message.
There is no TCP FIN or RST at all. The application looks hang-up
until TCP timeout happens on the client side, which may take too
long.
Therefore, the event MQTT_EVT_PINGRESP is added to inform the
application that the route between client and server is still valid.
Signed-off-by: PK Chan <pak.kee.chan@nordicsemi.no>
OpenThread has api to make use of radios energy scan feature.
Implemented this api in zephyr. This allows thread to perform energy
scan when needed.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
According to LWM2M specification, when Queue Mode is used, the LWM2M
client should keep the reciever on for specified time after sending A
CoAP message. This commit adds a new LWM2M event,
`LWM2M_RD_CLIENT_EVENT_QUEUE_MODE_RX_OFF`, to facilitate the process by
notifying the application when it's safe to turn the receiver off.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add Kconfig option to enable Queue Mode binding. With this option
enabled, the LWM2M client will register with `UQ` binding, instead of
`U`.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Older OT code used preprocessor #if conditionals, while newer code
used IS_ENABLED macro. Unify the approach by switching to the latter
option.
Additinally, fix inclusion issue that came out after switching to
IS_ENABLED.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new transport handler for MQTT, with sendmsg-like functionality.
This allows TCP transport to send PUBLISH packets w/o fragmentation at
the TCP layer. Implement this new functionality for all existing
transports.
Fixes#22679
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`mqtt_transport_write` failue was logged with `errno` value which is not
correct as the return value from the function is valid in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
TLS sockets did not increase refcount of a net_context running TCP,
which could lead to a crash upon TCP disconnection.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If CONFIG_NET_PKT_RXTIME_STATS is set, then update the received
packet RX time for packet sockets (SOCK_RAW). This was already
working for normal sockets but the statistics update was missing
from SOCK_RAW.
Fixes#22489
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
commit e3dc05f14d ("net: config: Wait network interface to come up")
introduced check_interface() function, which accidentally has 2
different signatures depending on CONFIG_NET_NATIVE selection.
Let's fix the second signature to be correct.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/22693
Signed-off-by: Michael Scott <mike@foundries.io>
The zsock_accept_ctx() calls z_reserve_fd() on entry but fails
to call z_free_fd() on failure. This will leak the allocated
socket descriptor.
Fixes#22366
Signed-off-by: Inbar Anson Bratspiess <inbar.anson.bratspiess@330plus.net>
I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
When is NET_SOCKETS_SOCKOPT_TLS set, it should set TLS_CREDENTIALS
even when NET_NATIVE=n, so that platforms that use socket offloading
can continue to set TLS credentials.
We are now setting this via 'imply' instead of 'select', so that
prj.conf can opt out if necessary.
Fixes#22390
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Instead of using a custom offloading interface, users can use
`NET_SOCKET_REGISTER` macro to register custom socket API provider. This
solution removes a limitation, that only one offloaded interface can be
registered and that it cannot be used together with native IP stack.
The only exception remainig are DNS releated operations -
`getaddrinfo`/`freeaddrinfo`, which, when offloaded, have to be
registered specifically.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Sort out mbedTLS dependencies in sockets Kconfig. mbedTLS will now
be enabled when TLS sockets and native network stack are enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Users of mqtt_live() have no idea when it actually sends a ping.
As a result it's very hard to know when to use mqtt_input() to
process the incoming PINGACK.
Instead of returning a 0 result when a ping isn't generated in
mqtt_live(), let's return -EAGAIN.
Signed-off-by: Michael Scott <mike@foundries.io>
Make sure that if we receive websocket data in small chunks,
the parsing and returning of data to caller is done properly.
Fixes#21989
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The MQTT connection is closed in case an mqtt_ping fails anyway, so
it's better to let the application know early that something went
wrong.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As mDNS requests set DNS id to 0, we cannot use it to match
the DNS response packet. In order to allow this functionality,
create a hash from query name and type, and use that together
with DNS id to match request and response.
Fixes#21914
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make ioctl handlers of `ZFD_IOCTL_POLL_PREPARE` and
`ZFD_IOCTL_POLL_UPDATE` return an error code instead of setting errno
variable.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add function that returns remaining time until next keep alive message
shall be sent. Such function could be used for instance as a source
for `poll` timeout.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
After sending the MQTT disconnect message, no response is expected,
therefore it makes little sense to delay the socket closure.
So far it was expected to call `mqtt_input` function after calling
`mqtt_disconnect` in order to close the socket, which is
counter-intuitive. Simplify this, by closing the socket rightaway
in the `mqtt_disconnect` function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread settings implementation built on top of Zepyhr settings
submodule.
With this solution, OpenThread settings are identified with keys of
the following format: `ot/id/instance`, where `id` is assigned by
OpenThread stack, and `instance` is a 32-bit random number, both in
hex. The implementation makes use of `settings_load_subtree_direct`
function to iterate over settings instances. This allows the
OpenThread settings layer to be a fully transparent shim layer between
OpenThread/Zephyr APIs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If we can write to the socket in POLLOUT, then there is no need to
wait.
Note that this is not a full POLLOUT implementation but prevents
the code from waiting even if we could send data out.
Fixes#18867
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Maintain a simple count of how many PINGREQ have been sent for the
current connection that have not had a corresponding PINGRESP. Nothing
is done with this information internal to the MQTT driver, but it is
exposed to the application layer to monitor as desired.
Signed-off-by: Justin Brzozoski <justin.brzozoski@signal-fire.com>
Based on work by Michael Scott.
Add a new Kconfig knob, CONFIG_LWM2M_IPSO_TIMESTAMP_EXTENSIONS. This
defaults to n. When enabled, various IPSO objects will by default have
the timestamp resource (5518) added to their representations. This can
be turned off on a per-object basis.
The idea of adding timestamp resources was originally suggested by
Hannes Tschofenig on this OMA page:
https://github.com/OpenMobileAlliance/OMA_LwM2M_for_Developers/issues/429
Signed-off-by: Michael Scott <mike@foundries.io>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Follwing the convention in Zephyr, all CMake configuration related to
a module, should be placed within the module repostiory.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
IPv4 header options length will be stored in ipv4_opts_len
in net_pkt structure. Now IPv4 header length will be in
net_pkt ip_hdr_len + ipv4_opts_len. So modified relevant
places of ip header length calculation for IPv4.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
OpenThread recently introduced CMake build system into its repostiory
so we no longer need autotools to build OpenThread libraries and can
integrate them natively.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The TCP code expects that we know when the socket has called accept()
in order to continue connection attempt.
Fixes#21335
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Functions like `setup_ipv4` or `setup_ipv6` might already use the
`counter` semaphore, therefore it should be initialized before these
functions are called.
As a result of this issue, the network stack could stall until timeout
under certain circumstances (e.g. when OpenThread was used).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Before we try to set IP addresses to the network interface,
make sure that the interface is up.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread radio layer did not implement `ieee802154_radio_handle_ack`
API and provided fake ACK frame to the OpenThread.
This prevented proper Sleepy End Device operation, as it expects to
receive information in the ACK whether it should wait for more data to
come or should it put the radio to sleep.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add an implementation for `sendmsg`, so secure sockets can be used
together with the WebSocket module to implement secure WebSockets
("wss").
Fixes#20431
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added in commit 106a0f7306 ("net: lib: config: Add SYS_INIT handler to
set clock from SNTP"), never used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Handle this corner case with TCP connection closing:
1) Client A connects, it is accepted and can send data to us
2) Client B connects, the application needs to call accept()
before we will receive any data from client A to the application.
The app has not yet called accept() at this point (for
whatever reason).
3) Client B then disconnects and we receive FIN. The connection
cleanup is a bit tricky as the client is in half-connected state
meaning that the connection is in established state but the
accept_q in socket queue contains still data which needs to be
cleared.
4) Client A then disconnects, all data is sent etc
The above was not working correctly as the system did not handle the
step 3) properly. The client B was accepted in the application even
if the connection was closing.
After this commit, the commit called "net: tcp: Accept connections
only in LISTENING state" and related other commits are no longer
needed and are reverted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This reverts commit d70a854904.
The next commit fixes the original issue so this commit is no
longer needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this feature enabled (via CONFIG_NET_CONFIG_CLOCK_SNTP_INIT), an
application will automagically get correct absolute time via POSIX
functions like time(), gettimeofday(), etc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Use the newest version of the OpenThread project, as updated in
https://github.com/zephyrproject-rtos/openthread/pull/2.
Introduce the following fixes along with the update (they're squashed to
retain bisectability of OT samples):
* Update configs and flags used
Some OT configs were renamed, some new were introduced that Zephyr port
needs to set.
* Add entropy platform driver
OpenThreads `random` platform subsystem was replaced with `entropy`
subsystem which is supposed to serve as an entropy source for the
generic OpenThread's random generator.
* Halt OT thread when OT command is processed
OpenThread can currently be processed from two threads - a
genuine OpenThread thread and shell thread, which processes CLI
commands. This could cause trouble, when context was switched
during OT command processing (i.e. switched to process an incomming OT
message, while still in unfinished command handler).
In result, it was not possible to turn the commissioner role on via
CLI, as the commissioner petition response was handled before the
Commissioner::Start function finished its execution (if the
petitioner is also the network leader, all messages are passed
internally within the stack).
Fix this by suspending the OT thread for the time of an OT command
processing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Applications should use setsockopt() to setup the SOCKS5 proxy,
so the old API file, which is using net_context directly, is
moved SOCKS5 directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix GCC "warning: 'ipv4' defined but not used [-Wunused-variable]" and
"warning: 'ipv6' defined but not used [-Wunused-variable]" when either
IPv4 or IPv6 support is not enabled.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
LWM2M_FIRMWARE_UPDATE_PULL_LOCAL_PORT is unused since commit 54c10c04e5
("net: lwm2m: use security data for connections").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Unused since commit d1cb39e7ce ("net: lwm2m: migrate LwM2M library to
BSD-sockets API").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
With `CONFIG_NET_NATIVE`, offloaded drivers can specify capabilites with
`NET_IPV4/6` configs, so there is no longer need to handle socket
offloading separately.
Also, initialize hints structure with zeros, as according to man pages
unused fields should be set to 0:
`All the other fields in the structure pointed to by hints must contain
either 0 or a NULL pointer, as appropriate.`
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new config option `LWM2M_DNS_SUPPORT` to the LWM2M library, instead
of relying on `DNS_RESOLVER` which is only compatible with native
network stack. This allows to use DNS with offloaded interfaces
seamlessly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This is related to commit 1a6f4a6368 ("net: tcp: Accept
connections only in LISTENING state") which made the system
to only accept new connections if the application had called
accept(). Unfortunately the TLS accept was not fixed by that
commit so we were in wrong state when accepting TLS sockets.
This commit fixes that issue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
network device driver to the application. The data is only
calculated for UDP and TCP network packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The MQTT transport API functions are already documented in
mqtt_transport.h so need to duplicate them in individual
transport .c file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Randomly generating ID the first time coap_next_id() is called is more
in accordance with CoAP recommendations (see
https://tools.ietf.org/html/draft-ietf-core-coap-18, section 4.4)
"It is strongly recommended that the initial value of the
variable (e.g., on startup) be randomized, in order to make successful
off-path attacks on the protocol less likely."
Doing this in a dedicated init function is the cleanest and most
idiomatic approach. This init function is not exposed publically which
means it will be called only once, by the network stack init procedure.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
create_ipv6_answer() function is behind #define's but get used behind
IS_ENABLED(CONFIG_NET_IPV6), which is not allowed.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Cast a %lld argument to long long int. This is causing warnings on
recent GNU Arm Embedded toolchains, which fail the build with
-Werror=format=.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Do not try to re-use net_context.user_data field as in many places
(like in accept) it is expected to contain pointer to net_context.
Storing the socket flags will corrupt the value. To simplify and
make things less error prone, use socket specific field in net_context
to store the socket flags.
Fixes#19191
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
So far OpenThread compiled it's own, internal copy of mbedTLS library.
This commit changes this behavior by using Zephyr's mbedTLS instance
appropriately configured for OpenThread needs.
Generic mbedTLS config file was used in this case, so that application
can still configure remaining parts of mbedTLS for it's own needs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The socket flags are stored in void* so we need to use uintptr_t
instead of u32_t when manipulating the flag variable.
Fixes#19181
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If socket is marked non-blocking, then accept() will return immediately
if there is no one connecting.
Fixes#19103
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
SNTP is UDP-based protocol, and thus not reliable. Previously,
high-level aka "simple" SNTP just issues a single request via
the low-level SNTP API. Instead, send multiple requests, starting
with a small timeout, and exponential backoff, repeated within
timeout specified by user in call to sntp_simple().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously, they were tested only with CONFIG_NET_SOCKETS_POSIX_NAMES,
but should also work with POSIX subsys. Achieve this by including POSIX
headers in this case.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If proto field in socket() call is set to 0, then we should have
a sane default for it that depends on the type of the socket.
Fixes#18873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The semi-automated API changes weren't checkpatch aware. Fix up
whitespace warnings that snuck into the previous patches. Really this
should be squashed, but that's somewhat difficult given the structure
of the series.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These calls are buildable on common sanitycheck platforms, but are not
invoked at runtime in any tests accessible to CI. The changes are
mostly mechanical, so the risk is low, but this commit is separated
from the main API change to allow for more careful review.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
System call arguments, at the arch layer, are single words. So
passing wider values requires splitting them into two registers at
call time. This gets even more complicated for values (e.g
k_timeout_t) that may have different sizes depending on configuration.
This patch adds a feature to gen_syscalls.py to detect functions with
wide arguments and automatically generates code to split/unsplit them.
Unfortunately the current scheme of Z_SYSCALL_DECLARE_* macros won't
work with functions like this, because for N arguments (our current
maximum N is 10) there are 2^N possible configurations of argument
widths. So this generates the complete functions for each handler and
wrapper, effectively doing in python what was originally done in the
preprocessor.
Another complexity is that traditional the z_hdlr_*() function for a
system call has taken the raw list of word arguments, which does not
work when some of those arguments must be 64 bit types. So instead of
using a single Z_SYSCALL_HANDLER macro, this splits the job of
z_hdlr_*() into two steps: An automatically-generated unmarshalling
function, z_mrsh_*(), which then calls a user-supplied verification
function z_vrfy_*(). The verification function is typesafe, and is a
simple C function with exactly the same argument and return signature
as the syscall impl function. It is also not responsible for
validating the pointers to the extra parameter array or a wide return
value, that code gets automatically generated.
This commit includes new vrfy/msrh handling for all syscalls invoked
during CI runs. Future commits will port the less testable code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If we are returned IPv4 address but the hints says IPv6, then
return error as currently we do not support AI_V4MAPPED addresses.
Same check for IPv6 if we want only IPv4 address.
Fixes#18870
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Issue noticed with following scenario.
1) TCP server is listening for connections but will handle
only one connection at a time (e.g. echo-server sample)
2) Client A connects, and the connection is accepted.
3) Client B connects, instead of denying a connection,
it is "auto" accepted (this is the actual bug) even
if the application has not called accept().
4) After the connection A is closed, the connection B
gets accepted by application but now the closed
connection A will cause confusion in the net-stack
5) This confusion can cause memory leak or double free
in the TCP core.
It is not easy to trigger this issue because it depends
on timing of the connections A & B.
Fixes: #18308
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Allow user to disable native IP stack and use offloaded IP
stack instead. It is also possible to enable both at the same
time if needed.
Fixes#18105
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add new RD Client API of lwm2m_rd_client_stop() for this
Fix issues of de-register and event reporting in RD Client
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
The LwM2M implementation for DNS resolving has checks which
configure hints based on whether IPv4 or IPv6 are enabled.
Neither of them need enabled if using NET_SOCKETS_OFFLOAD,
which then causes an error to be returned to due to
"hints.ai_family" not being set.
Also the offload API need to know when to free the allocated
"struct addrinfo" instead of calling free() generically,
thus let's use the freeaddrinfo() API for sockets which will
call into the offload API if needed.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18765
Signed-off-by: Jun Qing Zou <jun.qing.zou@nordicsemi.no>
When the firmware_pull mechansim sends the callback to notify the
sample of a new firmware block, the user supplied buffer can be
smaller than the CoAP BLOCK_SIZE setting. To handle this case,
we loop through the payload and fill the user supplied buffer with
smaller chunks.
Unfortunately, the last_block calculation is done outside this loop
which causes several callbacks (while in this loop) to have
last_block true. Let's fix this by adding a small check to make
sure we're at the end of the current payload block before notifying
the user of a last_block.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16158
Signed-off-by: Michael Scott <mike@foundries.io>
The mDNS packet receive had issues:
* The DNS id needs to be 0 for both sending and receiving, we did
not accepted 0 incoming id.
* The mDNS response does not have any questions in it so we just
need to skip the question count checks in response.
* Skip the Cache-Flush bit in Class field so that we can properly
parse CLASS_IN value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In DNS server init, print information whether the DNS server
is mDNS or LLMNR one. This way we do not need to remember what
IP addresses are used either of them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The source UDP port in all Multicast DNS responses MUST be 5353
as described in RFC 6762 chapter 6.
Fixes#18732
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure we use the IPv4 event command when checking IPv4 address
add or delete instead of event mask.
Coverity-CID: 203483
Fixes#18400
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When val1 is 0, we need to handle a negative val2 value so that we
generate correct TLV value.
Example: val1 = 0, val2 = -500000 is equivalent to -0.5 decimal.
Currently we generate: 0.5 (losing the sign).
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
Current JSON formatting for float32/64 is broken in a similar way as
plain text. Let's use the newly fixed logic for plain text to
generate the float32/64 values in the JSON string.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
We can use the plain text float32/64 formatter for JSON as well, so
let's expose the put_float32/64 functions.
Signed-off-by: Michael Scott <mike@foundries.io>
Formatting a float32/64 value for plain text is broken.
Example for 32bit: val1=0 and val2=500000 is equivalent to 0.5
Current formatter was using %d.%d (%lld.%lld for 64bit) so
exported value was 0.500000 (or 0.5)
To fix this, for val2 use a zero-padded formatter for the maximum
length of each bit length (6 for 32bit and 9 for 64bit), and then
remove the zero characters at the end of the string.
Notes re: handling of val1/val2 signs:
- eliminate potential negative sign when converting val2 to avoid:
a value like: 0.-5
- use negative val2 when val1 is 0 to fix small negative handling
such as -0.5
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/16154
Signed-off-by: Michael Scott <mike@foundries.io>
When the bootstrap support was added, it looks like I somehow missed
the handling block in the engine.
Let's add it now to fix boostrap support.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/18080
Signed-off-by: Michael Scott <mike@foundries.io>
- LWM2M_SECURITY_INSTANCE_COUNT wasn't following the standard of
having the unconditional default in the last position
- LWM2M_SERVER_INSTANCE_COUNT needs another instance when
bootstrap is enabled.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M boostrap support is enabled via the config option:
LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP. If enabled, this config sets
the default # of server and security instances. However, this is
not working correctly because LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP
is defined below it's uses in the Kconfig file.
Let's move the RD_CLIENT configs higher in the Kconfig to fix this
behavior.
Signed-off-by: Michael Scott <mike@foundries.io>
Simplify algorithm to skip (aka calculate length) of encoded domain
name in a DNS answer. Now it's fully compliant to RFC 1035 regarding
handling of compressed FQDNs. Additionally, bounds checking is now
performed by the parsing code.
Fixes: #18334
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Let's use IS_ENABLED() instead of the #ifdef to get clearer code. ret
variable is used only at one place, no need for the ARG_UNUSED()
Coverity-CID: 203397
Fixes#18419
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use IS_ENABLED() instead of the #ifdef to get clearer code. ret
variable is used only at one place, no need for the ARG_UNUSED()
Coverity-CID: 203468
Fixes#18420
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv4 connection management status is stored in wrong
variable. ip_state should hold the status and then
it should be stored in state variable.
Fixes#18253
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When checking for total IP address counts, don't check
CONFIG_NET_IF_MAX_IPV6_COUNT twice. This was a typo for
CONFIG_NET_IF_MAX_IPV4_COUNT.
This was reported by IRC user: retfie
Signed-off-by: Michael Scott <mike@foundries.io>
- Commands were not gathered with the right macro
- bus fault access due to wrong declaration of iface_states external
variable.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Rename the socket_can implementation from CANBUS to CANBUS_RAW.
This is a preperation for 6LoCAN which is a CANBUS L2 for IPv6.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Before calling socket callback function, make sure the callback
function exists so that we do not get NULL pointer reference.
Fixes#18021
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current SOCKS5 based connections in mqtt are only
TCP (nonsecure) based. To support TLS based SOCKS5
connections, new methods needs to be introduced.
Instead, removed CONFIG_MQTT_LIB_SOCKS based implementation.
And now mqtt provides an api to set proxy
(mqtt_client_set_proxy()) details. That's enough,
socket layer will take care of making connections through
proxy server.
Fixes: #17037
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Current SOCKS5 implementation is above socket level and every
higher layer protocol or application level needs to have
SOCKS5 related changes. This solution is based on socket
setsockopt(). Application caller has to set proxy details
through setsockopt() and socket:connect() will take care
creating connection.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The SO_SOCKS5 socket option can be used by the application to
set the SOCKS5 proxy details. These details will be used when
connecting to peer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Several problems with memset usage in the LwM2M subsystem were
identified:
- Every single object that can have multiple instances is using
memset to initialize static resource data during init. This data
will already be set to 0 because it is static, so the memset
statements are unneeded.
- Instead of using memset during object init which is only called
one time during kernel startup, let's add a memset to the
object create function to ensure the resource data is cleared out.
It could have been used prior and then released via a DELETE op.
- the IPSO Timer object was setting a lot of data structure members
to 0 in the create function. Let's do 1 memset on the entire
structure and then only the non-zero values afterward.
Signed-off-by: Michael Scott <mike@foundries.io>
When presenting errors in lwm2m_engine_set() let's include the related
LwM2M path for easier debugging.
Signed-off-by: Michael Scott <mike@foundries.io>
This core LwM2M Object enables monitoring of parameters related to
network connectivity.
This is only the basic object structure. More work will be needed
to set the various resources based on connectivity.
Signed-off-by: Michael Scott <mike@foundries.io>
This Object is used to report the state of a momentary action push
button control and to count the number of times the control has
been operated since the last observation.
Signed-off-by: Michael Scott <mike@foundries.io>
LwM2M allows for multiple instance resources such the power source
resources in the device object. These types of resources have
always been very hard to work with, and frankly were poorly
implemented.
This led to other issues where it was very hard to have
non-sequential resource instances, and each resource of this type
needed special getter / setter methods such as:
lwm2m_device_add_pwrsrc()
lwm2m_device_set_pwrsrc_voltage_mv()
Going forward, as more LwM2M objects are implemented this just
doesn't scale well.
To fix this:
- split the resource instance data out from the resource data.
This includes the data pointer information and resource
instance id.
- add resource id and resource instance id to the event callback
functions so user's can see in more detail what resources and
resource instances are being handled.
- allow generic functions like lwm2m_engine_get_*() and
lwm2m_engine_set_*() to access resource instance data.
- adjust object resource initialization macros to map resource
instances to resources at the time of object instance
creation.
- fix up the lwm2m_client as a reflection of all of these changes.
Signed-off-by: Michael Scott <mike@foundries.io>
Due to work combining data into the lwm2m_message structure, we no
longer need to pass the lwm2m_engine_obj parameter between
formatters and most of the operation handlers.
So, let's remove it.
Signed-off-by: Michael Scott <mike@foundries.io>
The multi_max_count is no longer used and can be removed from the
obj_field structure if we change all of the OBJ_FIELD() macros to
use OBJ_FIELD_DATA() instead.
Technically, OBJ_FIELD() and OBJ_FIELD_DATA() are now the same, but
we're keeping them both for the time being. In the future, more
fields may be added to the obj_field structure and we can use the
OBJ_FIELD() macro again if that's the case.
Signed-off-by: Michael Scott <mike@foundries.io>
- Several of the functions use "path" as the parameter name for the
string-based LwM2M path. Let's clarify by using "pathstr".
- Recent updates to the LwM2M engine now support resource instances
when parsing the LwM2M path. Let's update descriptions accordingly.
Signed-off-by: Michael Scott <mike@foundries.io>
Per IPSO Light Control definition from the OMA LwM2M registry:
http://www.openmobilealliance.org/tech/profiles/lwm2m/3311.xml
There is an optional "Application Type" string resource (5750) in the
Light Control object. This was missed in the initial implementation.
NOTE: sample will assign reference if needed.
Signed-off-by: Michael Scott <mike@foundries.io>
We are pre-allocating a storage variable for the application type
resource in the IPSO Timer object. This is an optional resource
which won't always be set by samples.
Let's leave out the pre-allocated variable and let the sample set
this reference if needed (it's optional).
Signed-off-by: Michael Scott <mike@foundries.io>
Server records contain the default PMIN and PMAX settings for how
often we can send observe notifications. We are currently using
arbitrary defaults which cannot be changed when compiled or
during runtime.
Let's add Kconfig settings for the default settings to use and
also lookup the current values in the active server record when
an observe is added.
The actual PMIN/PMAX values can still be set via WRITE_ATTRIBUTE
operation.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently the retransmit_work is not cancelled when closing a context,
making it operate on an invalid context.
LwM2M RD client also closes the context and initializes it again when
registration with the server fails, overwriting the active timeout and
breaking the timeout dlist.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Move CMake ExternalProject integration of OpenThread to the
CMakeLists.txt file within the OpenThread fork.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The SO_TXTIME socket option can be used by the application to
tell the network device driver the exact moment when the
network packet should be sent.
This feature is also implemented in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add BSD socket sendmsg() API that can be used to send data to peer
and also pass ancillary data to lower level of the network stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User could have set something to optval in getsockopt() and we
need to copy the data to kernel optval so that the socket family
code can use the value for something.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Certain Thread implementations (notably ARMs) require a DHCPv6
implementation.
Allow the usage of the relevant OpenThread configuration parameters in
Zephyr.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
It currently only listens to relevant events about network interface to
decide whether raising connected or disconnected event.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current implementation of LwM2M engine doesn't allow users a way
of overriding TLS credential load with custom function. This
would be needed by an offloaded TLS stack where we don't want
to use standard Zephyr functions.
Let's add a load_credential function pointer to the LwM2M client
context which will be called when it's available.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17408
Signed-off-by: Michael Scott <mike@foundries.io>
When performing OTA using the LwM2M subsys, several logging errors
regarding log_strdup were noted. Let's fix these.
Signed-off-by: Michael Scott <mike@foundries.io>
If a sample wants to use the Zephyr implementation of mbedtls, it
enables CONFIG_MBEDTLS and sets any needed Zephyr-specific mbedtls
options.
Currently, the LwM2M subsystem selects MBEDTLS automatically when
LWM2M_DTLS_SUPPORT is enabled. Let's remove this and let the
LwM2M client sample enable mbedtls and it's options.
This mimics the behavior of several other network-related samples
and removes conflicts when selecting alternate implementations of
MBEDTLS.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17399
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_IPV* checks are not needed in lwm2m_parse_peerinfo().
The functions used are always available. Worse, having these checks
forces the need to enable CONFIG_NET_IPV4 or IPV6 when it's not really
needed (LwM2M could be using an offloaded IP stack).
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17401
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_IPV* checks are not needed in lwm2m_sprint_ip_addr(). The
functions used are always available. Worse, having these checks
forces the need to enable CONFIG_NET_IPV4 or IPV6 when it's not really
needed (LwM2M could be using an offloaded IP stack).
NOTE: Also fixes an issue where a NULL is returned when the IP address
is unknown. This usually ends up with a crash/abort in the logging
code.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17401
Signed-off-by: Michael Scott <mike@foundries.io>
If DNS server(s) are added or removed e.g., as part of DHCP
processing, send newly defined net-mgmt events so that
a user application may get this information.
Fixes#16924
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The hostname needs to have log_strdup() when printing it.
Also it is useful to print information if the sending fails.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- answer offset was 1 byte off.
- request offset, when copied into the answer, was off as well.
Fixes#16142
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The handcrafted allocation falls victim of misaligned structures due to
toolchain padding which crashes the socket test code on 64-bit targets.
Let's move it to the iterable section utility where those issues are
already taken care of.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Make sure the IPv4 and IPv6 socket addresses are initialized before
copying them. This avoids uninitialized memory access.
Coverity-CID: 199436
Fixes#17202
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This can be used to activate the network packet statistics
collection. Note that we do not have resources to calculate
each network packet transit times but we collect average times
instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently only setting and getting of Ethernet Qav options are
supported via this interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow application to listen network management events using
BSD socket API. Application needs to create the socket using
AF_NET_MGMT address family. At this point we only support
receiving network management events that the network subsystem
is sending.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This fixes the issue where observations are automatically reported using
the minimum period instead of the maximum. This causes notifications to
be sent more frequently than configured when the resource does not
change.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Current socket connect call implementation always takes
K_FOREVER timeout value, which blocks TCP connections
in case failure. TCP connections waits until it receives
SYN ACK. If there is no SYC ACK means, connect call is
blocked forever.
Added a Kconfig option to define timeout value. Default
value is 3000 milliseconds. User can modify it.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
