Calculate length based on provided SSID string, so user does not have to
provide length explicitly over shell.
This patch also removes requirement of minimum 3 characters SSID, as
the shortest SSID can be even 1 character.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Older OT code used preprocessor #if conditionals, while newer code
used IS_ENABLED macro. Unify the approach by switching to the latter
option.
Additinally, fix inclusion issue that came out after switching to
IS_ENABLED.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
We now negotiate DNS servers in the IPCP configuration. This has been
observed to speed up the connection setup. The received DNS servers
are used by the DNS resolver library, but we leave it optional since
the static server list might be preferable.
Increase MAX_IPCP_OPTIONS to 4 so that we can nack all RFC 1877
options.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
It is not unusual that the peer does not provide an IP address in the
ipcp negotiation. But because ppp is a peer-to-peer protocol, we do
not actually need to know the peer's address to use the network.
Signed-off-by: Göran Weinholt <goran.weinholt@endian.se>
Store the time difference value in u32_t variable than
abs() value in signed variable.
Fixes#22912
Coverity CID: 208406
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If nack_idx > 0, then the count_rej must be > 0. This means that
the "code" variable will never be set to PPP_CONFIGURE_NACK.
Fixes#22436
Coverity-CID: 207975
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
I think people might be reading differences into 'if' and 'depends on'
that aren't there, like maybe 'if' being needed to "hide" a symbol,
while 'depends on' just adds a dependency.
There are no differences between 'if' and 'depends on'. 'if' is just a
shorthand for 'depends on'. They work the same when it comes to creating
implicit menus too.
The way symbols get "hidden" is through their dependencies not being
satisfied ('if'/'depends on' get copied up as a dependency on the
prompt).
Since 'if' and 'depends on' are the same, an 'if' with just a single
symbol in it can be replaced with a 'depends on'. IMO, it's best to
avoid 'if' there as a style choice too, because it confuses people into
thinking there's deep Kconfig magic going on that requires 'if'.
Going for 'depends on' can also remove some nested 'if's, which
generates nicer symbol information and docs, because nested 'if's really
are so simple/dumb that they just add the dependencies from both 'if's
to all symbols within.
Replace a bunch of single-symbol 'if's with 'depends on' to despam the
Kconfig files a bit and make it clearer how things work. Also do some
other minor related dependency refactoring.
The replacement isn't complete. Will fix up the rest later. Splitting it
a bit to make it more manageable.
(Everything above is true for choices, menus, and comments as well.)
Detected by tweaking the Kconfiglib parsing code. It's impossible to
detect after parsing, because 'if' turns into 'depends on'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Each network interface needs to have IPv6 link local address.
The ll address was not set to VLAN interfaces which then caused
some of the IPv6 neighbors to be in wrong state (INCOMPLETE) in
neighbor cache.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Store the IPv4 address into the local LCP options and set it
as the interface IP address once IPCP negotiation is complete.
Fix calling the correct function when an IPCP Configure Reject
is received carrying our local IP address.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
OpenThread settings implementation built on top of Zepyhr settings
submodule.
With this solution, OpenThread settings are identified with keys of
the following format: `ot/id/instance`, where `id` is assigned by
OpenThread stack, and `instance` is a 32-bit random number, both in
hex. The implementation makes use of `settings_load_subtree_direct`
function to iterate over settings instances. This allows the
OpenThread settings layer to be a fully transparent shim layer between
OpenThread/Zephyr APIs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
No packet was previously sent, because net_pkt_set_ppp(pkt, true) was
not called on the outgoing packet. Also the received protocol instead of
LCP was used, which was incorrectly interpreted by remote peer.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Received net_pkt is always discarded in ppp_recv() if we return
NET_OK. Don't do this in ppp_fsm_recv_discard_req().
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
When iterating though configuration options it is possible that we will
fail to add data to nack_buf and hence unref it in error handling
path. Just after that we will unref buf, which has nack_buf in its
buffer chain.
Drop code unrefing nack_buf and just go directly to unrefing buf.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There is no possibility right now that 'nack == NULL' and 'nack_buf !=
NULL', so drop code path for that case.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Make the channel ops struct const since there really isn't anything
there that needs to change at runtime. The only exception is the L2CAP
shell which was playing with the recv callback, however that can be
fixed by introducing a simple bool variable.
With tests/bluetooth/shell this reduces RAM consumption by 112 bytes
while adding only 16 bytes to flash consumption.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
OpenThread recently introduced CMake build system into its repostiory
so we no longer need autotools to build OpenThread libraries and can
integrate them natively.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Packets shall never fail to be sent now that they are queued, so if an
error occured there is no point in keep the channel connected.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Without this fix is it not possible to terminate pppd and restart
pppd afterwards without restarting the firmware, too.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Without this fix is it not possible to terminate pppd and restart
pppd afterwards without restarting the firmware, too.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Allow to select Sleepy End Device, and configure it during OpenThread
initialization.
According to Thread Specification, Sleepy End Devices should always
attach to the network as SED, to indicate increased buffer requirement
to a parent. Therefore, we reconfigure the Link Mode on each boot.
Note, that Poll Period value is not stored in the persistent storage,
hence we also need to initialize it on each boot.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread radio layer did not implement `ieee802154_radio_handle_ack`
API and provided fake ACK frame to the OpenThread.
This prevented proper Sleepy End Device operation, as it expects to
receive information in the ACK whether it should wait for more data to
come or should it put the radio to sleep.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The time difference calculation did not check if the result
value would be < 0 which means really large value when converted
to unsigned.
Fixes#20100
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use the newest version of the OpenThread project, as updated in
https://github.com/zephyrproject-rtos/openthread/pull/2.
Introduce the following fixes along with the update (they're squashed to
retain bisectability of OT samples):
* Update configs and flags used
Some OT configs were renamed, some new were introduced that Zephyr port
needs to set.
* Add entropy platform driver
OpenThreads `random` platform subsystem was replaced with `entropy`
subsystem which is supposed to serve as an entropy source for the
generic OpenThread's random generator.
* Halt OT thread when OT command is processed
OpenThread can currently be processed from two threads - a
genuine OpenThread thread and shell thread, which processes CLI
commands. This could cause trouble, when context was switched
during OT command processing (i.e. switched to process an incomming OT
message, while still in unfinished command handler).
In result, it was not possible to turn the commissioner role on via
CLI, as the commissioner petition response was handled before the
Commissioner::Start function finished its execution (if the
petitioner is also the network leader, all messages are passed
internally within the stack).
Fix this by suspending the OT thread for the time of an OT command
processing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Unused after commit a76814bfb6 ("net: Convert core IP stack to use log
levels").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Send a Echo-Reply to every Echo-Request. This code does not verify
if the ppp stm is in LCP Opened state. See rfc1661 section 5.8.
Signed-off-by: Christian Taedcke <hacking@taedcke.com>
Re-run with updated script to convert integer literal delay arguments
to k_thread_create and K_THREAD_DEFINE to use the standard timeout
macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The callback function has been ignored in z_timeout_init() since the
timer rework in fall 2018. Passing real handlers to it in code is
distracting when they will be overridden by whatever callback is
provided in z_add_timeout().
As this function is an internal API deprecation is not necessary.
Remove the parameter and change all call sites to drop the argument.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
So far OpenThread compiled it's own, internal copy of mbedTLS library.
This commit changes this behavior by using Zephyr's mbedTLS instance
appropriately configured for OpenThread needs.
Generic mbedTLS config file was used in this case, so that application
can still configure remaining parts of mbedTLS for it's own needs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
System call arguments, at the arch layer, are single words. So
passing wider values requires splitting them into two registers at
call time. This gets even more complicated for values (e.g
k_timeout_t) that may have different sizes depending on configuration.
This patch adds a feature to gen_syscalls.py to detect functions with
wide arguments and automatically generates code to split/unsplit them.
Unfortunately the current scheme of Z_SYSCALL_DECLARE_* macros won't
work with functions like this, because for N arguments (our current
maximum N is 10) there are 2^N possible configurations of argument
widths. So this generates the complete functions for each handler and
wrapper, effectively doing in python what was originally done in the
preprocessor.
Another complexity is that traditional the z_hdlr_*() function for a
system call has taken the raw list of word arguments, which does not
work when some of those arguments must be 64 bit types. So instead of
using a single Z_SYSCALL_HANDLER macro, this splits the job of
z_hdlr_*() into two steps: An automatically-generated unmarshalling
function, z_mrsh_*(), which then calls a user-supplied verification
function z_vrfy_*(). The verification function is typesafe, and is a
simple C function with exactly the same argument and return signature
as the syscall impl function. It is also not responsible for
validating the pointers to the extra parameter array or a wide return
value, that code gets automatically generated.
This commit includes new vrfy/msrh handling for all syscalls invoked
during CI runs. Future commits will port the less testable code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Allow user to disable native IP stack and use offloaded IP
stack instead. It is also possible to enable both at the same
time if needed.
Fixes#18105
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds an explicit inclusion of toolchain.h from
ieee802154_frame.h.
The endianness preprocessor definitions (__BYTE_ORDER__,
__ORDER_LITTLE_ENDIAN__, __ORDER_BIG_ENDIAN__) are used by
ieee802154_frame.h; these being not defined can easily go unnoticed and
cause unexpected behaviours, as detailed in PR #18922.
toolchain.h ensures that these preprocessor definitions are defined and
*must* be included in a file that uses these definitions.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Do not try to memcpy() the same buffer to itself.
This one also reverts commit 112ecb7290
("net: gptp: Fix for coverity CIDs 203471 and 203464") as that
did not fully fix the issue.
Coverity-CID: 203464
Coverity-CID: 203471
Fixes#18394
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If no challenger went to replace the best port/vector, then the best
port is still the global_ds and thus point to the same memory: no need
to update the global_ds then.
Coverity-CID: 203471
Coverity-CID: 203464
Fixes#18395
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Looks like the logic to count rejection is missing. Removing count_rej
variable, and set a comment about initializing the code to the right
value once this logic will be in.
Coverity-CID: 203514
Fixes#18398
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit adds support for a 6LoCAN Ethernet border translator.
CAN frames with the translator CAN address are translated and forwarded
to Ethernet. Ethernet frames with the first 34 bits matching the MAC
address of the translator are translated and forwarded to 6LoCAN.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commits adds support for reception of packets thats comes from
a Ethernet to 6LoCAN translator. This packets carry the Ethernet
MAC address (6 bytes) inline in the FF (First Frame).
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Rename the socket_can implementation from CANBUS to CANBUS_RAW.
This is a preperation for 6LoCAN which is a CANBUS L2 for IPv6.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This is related to findings in #17997 and changes network related
header files to have include files outside of extern "C" { } block.
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Error codes are listed in header files and in the core spec as hex
values. Always print them in hex in debug for easier error code
checking.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
We must discard the received Discard-Request silently.
See RFC 1661 chapter 5.9 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently only net-shell calls net_ppp_ping() command, so make
it return the amount of time that it took to receive Echo-Reply
so the net-shell can print the round trip time value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive a protocol that we do not currently handle, then
return Protocol-Reject to peer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
By default PPP is started immediately when the network interface
goes up. This can be problematic especially when debugging the beast
so allow user to delay the startup.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Certain Thread implementations (notably ARMs) require a DHCPv6
implementation.
Allow the usage of the relevant OpenThread configuration parameters in
Zephyr.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
Bluetooth address parsing has been duplicated across the different
sub-shell files. Also missing parsing of identity/resolved addresses.
Move parsing of string close to parsing to string for a symmetrical API
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move duplicate hex2bin and add bin2hex function so that application can
use the functions and avoid code duplication.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Let's remove depends on NET_LLDP from all the options. It avoids this:
# CONFIG_NET_LLDP is not set
# CONFIG_NET_LLDP_LOG_LEVEL_OFF is not set
# CONFIG_NET_LLDP_LOG_LEVEL_ERR is not set
# CONFIG_NET_LLDP_LOG_LEVEL_WRN is not set
# CONFIG_NET_LLDP_LOG_LEVEL_INF is not set
# CONFIG_NET_LLDP_LOG_LEVEL_DBG is not set
CONFIG_NET_LLDP_LOG_LEVEL_DEFAULT=y
CONFIG_NET_LLDP_LOG_LEVEL=3
CONFIG_NET_LLDP_CHASSIS_ID="CHASSIS_ID_PLACEHOLDER"
CONFIG_NET_LLDP_PORT_ID="PORT_ID_PLACEHOLDER"
And instead it will generate this:
# CONFIG_NET_LLDP is not set
Make the menu as an enablement config option as well.
Adapting lldp header file relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ARP, LLDP and GPTP functions have dummies in case of being disabled so
let's use IS_ENABLED() accordingly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
OpenThread did not verify if the interface provided in the net_mgmt
handler is actually an OpenThread interface. In result, when multiple
network interfaces were used, different interfaces were processed by the
OpenThread handler, ending up in a crash.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/slist.h to sys/slist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make net_eth_get_ptp_clock_by_index() clock API to work with user space.
Create also unit test for testing this user mode support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The 32bits one can hold up to about 50 days, this is more than enough
knowing that ARP request timeout is 2 seconds.
So reducing the request start time to 32bits.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Drop packet if it has broadcast destination MAC address but the IPv4
destination address is not multicast or broadcast address.
See RFC 1122 ch 3.3.6 for details.
Fixes#16276
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We replied to an ARP request that has the same Sender Hardware Address
than that of ours. Such an ARP request must be discarded, no reply
should be sent and translation table should not be updated.
Fixes#16110
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If a packet is received with Ethernet source address different
from ARP's sender hardware address field, then DUT must use the
latter address in response packets.
Fixes#16098
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that the device driver API pointer is null.
For example if the device driver returns an error, the device
code will make the API pointer NULL so that the API would not
be used. This can cause errors in networking code where we
typically do not check the NULL value.
Fixes#15003
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This make use of NET_IF_NO_AUTO_START flag so Bluetooth interfaces are
not automatically enabled after initialized.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The pkt variable cannot be NULL at this point so the check for
nullness is not needed.
Coverity-CID: 198002
Fixes#15777
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If ethernet controller has VLAN tag strip flag enabled
(ETHERNET_HW_VLAN_TAG_STRIP), L2 etherent will not read tag from
the Rx etherent header. Instead it will fetch VLAN tag from
net packet metadata.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit prevents a situation when stored and possibly modified
commissioner dataset is overwritten with default configuration during
OpenThread initialization.
It introduces a new function, openthread_start, which verifies if the
dataset is already stored, and if not, depending on configuration,
preloads the default configuration or initiates the join procedure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Provide access functions for manipulating network interface flags.
There is no need for the caller of this API to know about the inner
details of the flags.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In addition to checking that the ARP entry does not exist as the
implementation is done currently, also check if the ARP packet
is due to IPv4 link local address configuration. In both cases
use the provided IPv4 address instead of the one set for the
interface.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
IPv4 link local uses ARP to detect conflicting addresses. Properly
set the ethernet packet type to NET_ETH_PTYPE_ARP when probing
for address duplicates.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
When VLAN is enabled, ethernet l2 layer fills ethernet header
but not added to the network buffer.
Fixes#15346
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
It is invalid to try to bit shift the same amount of bits as
what is the number of bits in the left expression’s type.
Coverity-CID: 187079
Fixes#8988
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that legacy - and unrelated - function named net_pkt_get_data has
been removed, we can rename net_pkt_get_data_new relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
subsys/net/lib/lwm2m/Kconfig.ipso is 'source'd within an 'if LWM2M', in
subsys/net/lib/lwm2m/Kconfig, so the 'depends on LWM2M' is redundant.
The 'depends on NET_IPV4' and 'depends on NET_L2_OPENTHREAD' are within
corresponding 'if's in the same file.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Some of these are from 'source'ing a file within a menu that has a
'depends on NET_L2_ETHERNET' (in drivers/ethernet/Kconfig) and then
adding another 'depends on NET_L2_ETHERNET' within it.
Similarly, subsys/net/l2/ethernet/Kconfig sources files within an
'if NET_L2_ETHERNET'.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
No Kconfig symbol called NET_GPTP_STACK_SIZE has ever been defined in
the Zephyr repo. Drop the CONFIG_* prefix from the #define.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We sometimes want to join a device to OpenThread mesh automatically.
This commit adds supports to do by Kconfig.
The default of CONFIG_OPENTHREAD_JOINER_PSKD is based on this page:
https://codelabs.developers.google.com/codelabs/openthread-hardware/
Signed-off-by: Takumi Ando <takumi.ando@atmark-techno.com>
If we receive the ARP request, then check if the ARP cache
contains an entry for this IP address already. If it does,
then update the MAC address in the cache.
Fixes#10188
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to hide the symbols in the header file if CONFIG_NET_LLDP
is not enabled. This also allows the documentation to be generated
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
- differentiating actual "fragment" to buffer element from a net_pkt
- instead of copying data (and thus allocating buffer) let's just take
the fragment buffer and put it into result packet.
- fixing compilation issue in relevant test
It's more efficient that way, as we use already allocated fragment
buffer instead of reallocating/deallocating after each fragment
reception.
A possible optimization would be to calculate the actual size + header
difference if only the actual size is close to the target size.
It would avoid to get a dry run of the header decompression for each
fragment received. The difficulty being in finding the sweet spot when
it is relevant to calculate the header difference.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Maybe there is an easier way to fill in the buffer in one call from an
otMessage.
Switch "frag" keyword to "buf", as "frag" is now reserved for actual
packet fragmentation and not buffer.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Make sure that network related functions are always documented.
This means keeping the prototype and possible stub together.
Fixes#12615
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Commit 44964c735e ("net/gptp: Switch GPTP to new net_pkt API") changed
the callback used for allocation (from net_pkt_get_reserve_tx to
net_pkt_alloc_with_buffer), but for compilation with
CONFIG_NET_DEBUG_NET_PKT_ALLOC enabled, both callbacks are used
(the first pointer was just overwritten, causing MPU FAULT).
This commit removes the extra callback and fixes the fault.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
And remove the parameter "full" as there is no "ll reserve" distinction
anymore. The parameter was unused since the ll reserve concept removal.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The packet can be referenced somewhere else and letting the newly added
L2 header will generate corrupt packet. If the same packet is being
resent, ethernet will add again its L2 header. Thus the need to remove
such L2 header every time a packet has been sent, successfully or not.
Fixes#12560
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is basically a dummy layer that just passes data through.
It is needed so that we can create CANBUS type network interface
to the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If packet family is AF_PACKET and CONFIG_NET_SOCKETS_PACKET
is enabled, just handover the packet to driver for sending.
L2 layer will not touch AF_PACKETs at the moment.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The return value of net_if_get_link_addr points to a struct net_linkaddr
instead of to the raw MAC address. Without this fix the source address
will always end in 06:03 and will most likely be the same for different
boards running the same software.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Since the rework of L2/L3 split, only L2 has access to its header. Thus
up to Ethernet one to set LLDP PTYPE.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Use the new API where relevant. Only sam_gmac is left aside for now.
This simplifies a lot the code as the caller should only care about
allocating net_pkt and its buffer once, and thus will not need to mess
with "frags" etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net-app API is removed. Users should use the BSD socket API
for application development.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It has been observed that some network drivers, f.ex. the SAM E70 GMAC,
call net_pkt_unref from inside the interrupt that signals the successful
transmission of a packet. This conflicts with the net_pkt_unref call
made by ethernet_send after the packet has been given to the driver.
We fix this by using an atomic_t to hold the reference count as there
might be other, difficult to find cases of net_pkt_(un)ref being used
across threads and interrupts.
The name of the element has been changed from "ref" to "atomic_ref" to
cause a compile error when code still has not been converted to use the
atomic_* functions.
Fixes#12708
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Mark automatically and statically configured mesh-local addresses
with mesh_local flag, so that they are not used as a source for
off-mesh destinations.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In OpenThread RLOC address and ALOC address are used for internal mesh
routing and should not be used by applications as they can change
dynamically during runtime. Therefore prevent registering them on Zephyr
interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread commissioner feature has extra stack requirements, hence
increase it in this configuration.
Fixes#12455
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
15.4 MHR is no longer set in net_buf pointed by net_pkt, but in a
separate net_buf, hence we need to check that net_buf now to
determine if we need to wait for ACK or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Two issues identified with 6lo fragmentation for ieee802154 that broke
the communication:
1) ieee802154_fragment_is_needed function did not take 15.4 FCS size
into account, hence taking wrong decision in some cases.
2) set_up_frag_hdr was writing with wrong offset, which resulted in 6lo
bytes being overwritten by 15.4 header.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Do not extra ref and then obscurely unref the packet inside
the statistics update function.
Actually, this extra ref/unref isn't needed here at all.
The packet is unreferenced only on a successful send, statistics
updating can be done before the unref in a clean and understandable way.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Try to catch the original caller of setup_gptp_frame() function
in order to see who is allocating buffers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update zephyr integration of openthread to latest api as of 2018-12-17:
2a75d30684
Both echo_server and echo_client compile and are operational.
Signed-off-by: Martin Turon <mturon@google.com>
Moving towards serialized fragmentation, adapting mac command creation
to avoid the need of ll_reserve etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will permit to avoid the need for ll_reserve.
It also removes net_buf allocation and deletion, as it works per-frame.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fragmentation has nothing to do with 6lo. Up to the bearer to do so.
This change is required for futur serialization of 15.4 fragmentation.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need to reserve any space for each frag, as the l2 will
allocate a frag for the ethernet header, arp will do the same.
This is one step further to removing the concept of ll reserve.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Make sure that the link delay (propagation time) is calculated
same way as how Avnu/gptp is doing it with checks for rate ratio.
This is done like this in order to behave same way as their gptp.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is useful info as otherwise we get no indication to user
if the packet is not created and not sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Neighbor rate ratio cannot be 0 as that would mean 0 packet
delivery time which is not plausible.
Add also some debugging to print current neighbor propagation
delay value.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The pdelay_allowed_lost_resp_exceed_count was updated even if we
had received pdelay response.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Increase the net_buf length in proper places. So when gPTP
header is added, increase the buf->len properly, and then
when gPTP packet type is added, increase it again properly.
This way the net_buf length is updated in more logical way.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The state2str() function should only be used if debugging
is enabled thus add some pre-processor checks there.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print function and line number when changing state and when
debugging is enabled. Otherwise it is a bit difficult to follow
the program logic and locate the state change operation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the msg parameter for PRINT_INFO() is always a const string
that is not coming from stack, there is no need to use
log_strdup() here. This helps to avoid the
"<log_strdup alloc failed>" messages.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Common statistics should be updated in one centralized place and
ethernet_send is the right place for tx stats, as well as ethernet_recv
for rx stats.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Add missed out helper functions to update the errors.tx and error.rx
in the stats structure.
Signed-off-by: Fadhel Habeeb <fadhel@zilogic.com>
Signed-off-by: Nirav Parmar <niravparmar@zilogic.com>
Signed-off-by: Vijay Kumar B <vijaykumar@zilogic.com>
gPTP subsystem was calling pow(x,y) function with X and Y being
constants; these are replaced with the pre-computed values.
Signed-off-by: Andrei Laperie <andrei.laperie@intel.com>
Instead of redoing what Ethernet L2 already does, let just create the
gptp message without any Ethenet header. Which one will be done as
sending phase by Ethernet L2 relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for Ethernet, up to ieee802154 L2's send to actually sent the packet.
It's currently unoptimized as 6lo compression, 15.4 fragmentation and so
on will reallocate net_buf etc... but it's the first step towards
removing ll reserve space and more.
Applying changes to Openthread L2 as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now instead of such path:
net_if_send_data -> L2's send -> net_if tx_queue -> net_if_tx -> driver
net_if's send
It will be:
net_if_send_data -> net_if tx_queue -> net_if_tx -> L2's send -> driver
net_if's send
Only Ethernet is adapted, but 15.4 and bt will follow up.
All Ethernet drivers are made compatible with that new scheme also.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that sending is done at last time, in one pass, no need to go
through net_if_send_data here.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently, first part is done in L2's send, then the next one in
ethernet device driver net_if send function. That last one was already
moved to a L2 based implementation. Let's just move forward and place
the whole logic of the L2's send in that second function.
This is the first step, ethernet centric only, to move towards a
one-pass sending logic in net stack. In future, net_if's send will
disappear.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current code generating Ethernet header is scattered all over the place,
sometimes in functions that are supposed to check something (and not
filling the header). Not to say about innefficiency.
Src ll address does not need to be set in L2 as net_if.c handles that
already.
Broadcast dst ll address is the same in ipv4 or ipv6, thus factorizing.
In each case, multicast is filled in only at the relevant place.
This is the first step towards changing L2 sending logic, when L2 send
API function will be the only point of sending. The redirection from
driver to L2 again (which finally uses the right device API function to
send) it a temporary hack.
This simplifies the code but will also enable using statically
allocated net_buf and ethernet header payload buffer afterwards.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is currently unoptimized, as all frags are allocated with relevant
ll reserve for such header space. However, this is the first step
towards getting rid of that ll reserve concept everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove an unnecessary local variable to store the
return value, instead return directly thereby saving
few bits of memory.
Found using Coccinelle.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
If ARP Request with sender IP address set to localhost then drop
the request.
Fixes#11489
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If network stack found ARP entry for peer address, then it
tries to send pending IP packet. But it always keeps ptype
as ARP only. In this particular scenario it has to be IP
packet.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If ARP header contains invalid fields then drop the packet.
Fixes#11257Fixes#11254Fixes#11253Fixes#11248
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Verify incoming ARP packet hardware and protocol type. Drop
unknown type of packets.
Fixes#11215Fixes#11217
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If we change the ethernet MAC address, then we must also remove
the old IPv6 interface identifier (iid) address from the
interface. Otherwise there might not be enough space in the IPv6
address array for the new iid address and beside the old iid
address is not useful any more after the MAC address is changed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv4 that has broadcast destination address, then
properly handle it.
This means that for
* ICMPv4, if CONFIG_NET_ICMPV4_ACCEPT_BROADCAST is set (this is the
default value) and we receive echo-request then accept the packet.
Drop other ICMPv4 packets.
* TCP, drop the packet
* UDP, accept the packet if the destination address is the broadcast
address 255.255.255.255 or the subnet broadcast address.
Drop the packet if the packets broadcast address is not in our
configured subnet.
In sending side, make sure that we do not route broadcast address
IPv4 packets back to us. Also set Ethernet MAC destination address
properly if destination IPv4 address is broadcast one.
Fixes#10780
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, the wifi shell needed to remove the quotes from the
SSID parameter, passed in by the underlying shell.
The new shell is now able to parse quoted strings as arguments,
so this adjustment can be removed.
Otherwise, it results in a failure to connect to an AP, as the first
character of the SSID name is stripped off.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
It is possible that connect callback is called when shell is not
yet set. Make sure to check this and fallback to use printk() if
shell_printf() cannot be used.
Fixes#10617
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The connect command parameters were not checked properly if
user decided to supply only mandatory parameters.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the device does not support wifi offloading, then return -ENOTSUP
so that wifi support can be enabled for testing purposes even if
the actual device does not have wifi support. This is happens for
example in qemu which does not support wifi offloading.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Typo when calculating new value for local_time_n.low, the calculation
was just a constant expression and the value was not modified.
Coverity-CID: 188759
Fixes#10568
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive a valid gratuitous ARP request, then update ARP
cache accordingly. This feature is optional and by default
it is enabled, but can be turned off if needed.
This is similar to a feature available in Linux, and is enabled
by default in many distros.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The wifi mgmt does only support TCP/IP offload wifi chip,
while non-offload wifi chip can not scan/connect to AP.
Signed-off-by: Dong Xiang <dong.xiang@unisoc.com>
The wifi management interface was still using one SYS_LOG_DBG
macro call, replacing that with NET_DBG.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the debugging print calls are async, all the strings that might
be overwritten must use log_strdup() which will create a copy
of the printable string.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
