When printing network interface information print index or
index + pointer, so that the output is more user friendly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Useful to know what flags are set for the network interface
so print them in the shell by the "net iface" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This can be used to implement tunneling, VPN etc. The virtual
interfaces can be chained together to support multilayer
network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Application can disable IPv4 or IPv6 later if those are not
needed nor used for a given network interface.
Fixes#14581
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove legacy TCP stack as it is replaced by the new TCP2 stack.
The TCP2 stack has been the default stack since 2.4 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Switch to the new API for delayed work related to DNS queries.
In the previous solution it was assumed that the work item could be
immediately cancelled at the point the query slot was released. This
is not true. We need a secondary condition to record the fact that
the query was completed while the work item was still pending, and an
additional check to detect when the work item completed and the slot
reclaimed.
Also annotate functions to indicate when they require the lock on
query content to be held, add some helpers that abstract core
operations like invoking a callback or releasing a query slot, and fix
some more cases where query slot content was accessed outside of the
new lock infrastructure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
If there is no timeout, the connect will timeout immediately
and the connection is not established.
Fixes#33185
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds to network shell set of basic commands for UDP
protocol to receive and send datagrams.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_buf_max_len() provides the maximum number of bytes which can be put
behind the data pointer. This provides a save alternative to using the
size field of the net_buf structure directly, which does not take the
reserved bytes (headroom) into account.
This commit also replaces the usage of the size field in places where
size got used directly. Code has not been adjusted when it is easy to
recognise that the buffer does not have any reserved bytes, which is the
case after allocation or reset. Same goes for the faulty usage by
net_pkt as exposed by the last commit and begin fixed by a separate
commit.
Even though it would be cleaner, I decided to not rename the size field
to e.g. __buf_size in order to keep the amount of code changes low.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The net_timeout structure is documented to exist because of behavior
that is no longer true, i.e. that `k_delayed_work_submit()` supports
only delays up to INT32_MAX milliseconds. Nonetheless, use of 32-bit
timestamps within the work handlers mean the restriction is still
present.
This infrastructure is currently used for two timers with long
durations:
* address for IPv6 addresses
* prefix for IPv6 prefixes
The handling of rollover was subtly different between these: address
wraps reset the start time while prefix wraps did not.
The calculation of remaining time in ipv6_nbr was incorrect when the
original requested time in seconds was a multiple of
NET_TIMEOUT_MAX_VALUE: the remainder value would be zero while the
wrap counter was positive, causing the calculation to indicate no time
remained.
The maximum value was set to allow a 100 ms latency between elapse of
the deadline and assessment of a given timer, but detection of
rollover assumed that the captured time in the work handler was
precisely the expected deadline, which is unlikely to be true. Use of
the shared system work queue also risks observed latency exceeding 100
ms. These calculations could produce delays to next event that
exceeded the maximum delay, which introduced special cases.
Refactor so all operations that use this structure are encapsulated
into API that is documented and has a full-coverage unit test. Switch
to the standard mechanism of detecting completed deadlines by
calculating the signed difference between the deadline and the current
time, which eliminates some special cases.
Uniformly rely on the scanning the set of timers to determine the next
deadline, rather than assuming that the most recent update is always
next.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
We did not check that user has supplied network interface index
in "net stats iface <idx>" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has enabled TCP debugging, print detailed internal TCP2
information too when user gives "net conn" command. This is useful
to have when debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
using CONFIG_NET_BUF_POOL_USAGE monitor avail_count,
this variable should be protect.
Protecting it by using atomic variable
Signed-off-by: Ehud Naim <ehudn@marvell.com>
Remove obsolete include of the shell_uart.h file.
It is sufficient to include the shell.h file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that TCP2 is the default stack, make the shell compatible
with both stacks.
Note: net_tcp_foreach is not implemented in TCP2, so related
code depends on TCP1.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Print role information next to port information. Also make
sure that port number is set correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net: route: Add prefix-based ipv6 multicast forwarding
This adds/reenables the feature of multicast routing/forwarding.
The forwarding decision is based on the added multicast routes
and the new network interface flag:
NET_IF_FORWARD_MULTICASTS.
Signed-off-by: Jan Georgi <jan.georgi@lemonbeat.com>
This patch implements optional authentication phase, which is done
between link establishment and network phases. It is part of LCP option
negotiation to decide whether authentication is needed and which
protocol will be used. For now we add only PAP support and try to
negotiate it when some other protocol (e.g. CHAP or EAP) is proposed
earlier. For simplicity reason we only add one way authentication
support, which means that we try to authenticate to the other peer, but
do not require authentication from it.
This is an important step to make PPP work with cellular network modems,
because most of them require to provide username and password within PPP
authentication phase. Those credentials are used by modem to login to
cellular network. In most cases however it is enough to provide dummy
values, because they are not verified. For this reason and simplicity of
this patch we hardcode PAP Peer-ID and Password now.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add extra net_pkt RX timing information to "net stats" command.
You neeed to enable CONFIG_NET_PKT_RXTIME_STATS and
CONFIG_NET_PKT_RXTIME_STATS_DETAIL config options.
The "net stats" command will print something like this:
Avg RX net_pkt (7) time 459 us [0->23->16->257->160=456 us]
The extra stats is the end of line inside brackets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add extra net_pkt TX timing information to "net stats" command.
You neeed to enable CONFIG_NET_PKT_TXTIME_STATS and
CONFIG_NET_PKT_TXTIME_STATS_DETAIL config options.
The "net stats" command will print something like this:
Avg TX net_pkt (5867) time 82 us [0->33->20->27=80 us]
The extra stats information is the end of line inside brackets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add command to register a receive callback to the net_context used for
the TCP connection that is opened with 'net tcp connect'. The receive
callback will simply print the number of bytes received and inform if
the connection is closed. This makes it possible to test both the tx
and rx paths with the net shell.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
This change adds new, optional switch to 'net ping' command - to
be more specific the '-I <iface index>', where the <iface index>
is the number of supported network interface.
One can discover this number from the Zephyr shell after running
'net iface'.
The default interface stays the same - just the switch is added to
override the used interface for 'net ping' invocation.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Print detailed information about a given net_pkt. This is
useful if there is a memory leak and you want to see more
detailed information about the data inside the buffer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The current design of the network-specific stack dumping APIs
is fundamentally unsafe. You cannot properly dump stack data
without information which is only available in the thread object.
In addition, this infrastructure is unnecessary. There is already
a core shell command which dumps stack information for all
active threads.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit updates the the IPv4 ping command to handle the ENETUNREACH
error number returned by `net_icmpv4_send_echo_request` function when
IPv4 is unavailable.
The `net_icmpv4_send_echo_request` function previously returned EINVAL
when IPv4 is unavailable and this caused the shell command to report
"Invalid IP address" even when the provided IP address is correct; this
problem was corrected by returning ENETUNREACH instead of EINVAL in the
aforementioned function.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Currently the TCP commands work only for legacy TCP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Use same format string when printing information that certain
config option is not enabled. This saves some flash as the
same string can be shared in the shell.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about how long network packets took from
application to the network device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print information about how long network packets took from
network device driver to the application.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Try to figure out where the ping reply should be sent if there
are multiple network interfaces in the system.
Fixes#19612
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
