With these changes, dial up Zephyr application/driver can use
socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW) for creating
a socket for sending/receiving data to/from ppp net link, i.e.
packet is going to/from PPP L2.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
This can be used to implement tunneling, VPN etc. The virtual
interfaces can be chained together to support multilayer
network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the network driver for some reason did not set the data in
the network packet properly, then just drop it as we cannot do
anything with just plain net_pkt.
Fixes#28131
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The current design of the network-specific stack dumping APIs
is fundamentally unsafe. You cannot properly dump stack data
without information which is only available in the thread object.
In addition, this infrastructure is unnecessary. There is already
a core shell command which dumps stack information for all
active threads.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Randomly generating ID the first time coap_next_id() is called is more
in accordance with CoAP recommendations (see
https://tools.ietf.org/html/draft-ietf-core-coap-18, section 4.4)
"It is strongly recommended that the initial value of the
variable (e.g., on startup) be randomized, in order to make successful
off-path attacks on the protocol less likely."
Doing this in a dedicated init function is the cleanest and most
idiomatic approach. This init function is not exposed publically which
means it will be called only once, by the network stack init procedure.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
If the loopback driver is enabled, then the packet might come
from localhost in which case mark it properly. Without this marking
the packet from/to 127.0.0.1 or ::1 would be dropped in later checks.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide access functions for manipulating network interface flags.
There is no need for the caller of this API to know about the inner
details of the flags.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
DNS is not part of L3, but as dhcpv4 or the net shell, it is a services
on top of the network stack. So let's gather all in a dedicated
function.
This also rework the order when starting the DNS service. There was an
issue for offload device: these would be fully initialized in
init_rx_queues() which was called after l3_init. l3_init had already
started dns: which would not be able to bind correctly, proving to be
fully dead afterwards. Instead, starting the dns at the very end
ensures that all is initialized properly from devices to stack.
Fixes#15124
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This attribute, in case CONFIG_NET_STATISTICS is enabled, made sense
when L2's send() function did not return the length of the sent packet.
But now, it's a superflous optimization as is it used only to set the
stats on recv or send, where net_pkt_get_len() can be used directly.
This helps to save 2 bytes from struct net_pkt.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
No need to hide the symbols in the header file if CONFIG_NET_LLDP
is not enabled. This also allows the documentation to be generated
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
pkt->buffer is represented by 1+ net_buf. If some are unused, this will
deallocates them.
This situation can happen on TCP where net_pkt allocator evaluates the
header size to its maximum size. Which space might not be (fully) used
in the end. On fixed data size buffer, this might end up by having last
buffer(s) not bein used. So better removing those.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If CONFIG_NET_SOCKETS_PACKET is enabled, then feed the packet
to net_packet_socket_input() for processing. It will search
for the net_contexts and if proper handler is found, pass
the packet to connection handler.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Use the new net_pkt API to proceed through IPv6 header and all the
extension header as well.
Use udp/tcp input functions relevantly, and call net_conn_input
afterwards.
Note: This commit temporarly disable IPv6 fragmentation support
in the code directly. Which support will be re-enabled afterwards.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As before, such header is meant to be in a contiguous area (beginning
of the buffer, only 20 bytes)
Opportunistically chaning the function name to net_ipv4_input() (all
will be create/finalize/input).
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Newly received pkt can get their cursor intialized at net_recv_data()
(most of the time, drivers won't mangle with the content before calling
that function).
Right after l2 (net_if_recv_data()) parsing as well. L2s pull the
starting buffer after ll header. Instead of letting L2s updating the
cursor, it's simpler to reinitialize it directly after such parsing.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will avoid new API's writing functions to modify the packet's
content. For instance while checking its checksum etc...
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the destination IPv6 address is interface local scope multicast
address FF01::, then loopback those packets back to us as that is
the purpose of those addresses. They are to work same way as
localhost unicast address. See RFC 3513 ch 2.7 for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unify the function naming for various network checking functions.
For example:
net_is_ipv6_addr_loopback() -> net_ipv6_is_addr_loopback()
net_is_my_ipv6_maddr() -> net_ipv6_is_my_maddr()
etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must drop packet that is received from outside and which has
IPv6 loopback address (::1) either as a destination address or
source address.
Fixes#10933
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive an IPv4 that has broadcast destination address, then
properly handle it.
This means that for
* ICMPv4, if CONFIG_NET_ICMPV4_ACCEPT_BROADCAST is set (this is the
default value) and we receive echo-request then accept the packet.
Drop other ICMPv4 packets.
* TCP, drop the packet
* UDP, accept the packet if the destination address is the broadcast
address 255.255.255.255 or the subnet broadcast address.
Drop the packet if the packets broadcast address is not in our
configured subnet.
In sending side, make sure that we do not route broadcast address
IPv4 packets back to us. Also set Ethernet MAC destination address
properly if destination IPv4 address is broadcast one.
Fixes#10780
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of one global log level option and one on/off boolean
config option / module, this commit creates one log level option
for each module. This simplifies the logging as it is now possible
to enable different level of debugging output for each network
module individually.
The commit also converts the code to use the new logger
instead of the old sys_log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The LLDP protocol defines 2 separate agents, the Transmitters and
the Receivers. For the context of Zephyr, we are only interested in
the Tx agent, thus we drop any LLDP frames received by Zephyr.
LLDP frames are basically composed by an ethernet header followed by
the LLDP Protocol Data Unit (LLDPDU). The LLDPDU is composed by several
TLVs, some of them being mandatory and some optional.
Our approach here is having TLVs fully configured from Kconfig, thus
having the entire LLDPDU constructed on build time.
The commit adds NET_ETH_PTYPE_LLDP definition and related handling.
If CONFIG_NET_LLDP is enabled then ethernet_context has a pointer to
the struct net_lldpdu that belongs to that ethernet interface. Also
when CONFIG_NET_LLDP is enabled, the LLDP state machine will start to
send packets when network interface is coming up.
Currently the LLDP state machine is just a k_delayed_work() sending the
LLDPDU at a given period (defined by CONFIG_NET_LLDP_TX_INTERVAL).
Fixes#3233
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add basic IPv4 Link Local support as described in RFC 3927.
Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Similar to UDP, some drivers can make use of the following functions:
net_tcp_get_hdr()
net_tcp_set_hdr()
Let's expose them as <net/tcp.h> and change all internal references
to "tcp_internal.h".
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Instead of one global statistics, collect statistics information
separately for each network interface. This per interface statistics
collection is optional but turned on by default. It can be turned
off if needed, in which case only global statistics are collected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Although very unlikely, make sure that if the net_recv_data() is
called with NULL network interface or packet, we recover that and
return error to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add statistics for number of packets and bytes to each traffic
class. Print this information in net-shell.
Also make sure that we do not calculate total packet length many
times. So calculate network packet total length once and then use
that value instead of calculating it many times in a row.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With this commit it is possible to add priority to sent or received
network packets. So user is able to send or receive higher priority
packets faster than lower level packets.
The traffic class support is activated by CONFIG_NET_TC_COUNT option.
The TC support uses work queues to separate the traffic. The
priority of the work queue thread specifies the ordering of the
network traffic. Each work queue thread handles traffic to one specific
work queue. Note that you should not enable traffic classes unless
you really need them by your application. Each TC thread needs
stack so this feature requires more memory.
It is possible to disable transmit traffic class support and keep the
receive traffic class support, or vice versa. If both RX and TX traffic
classes are enabled, then both will use the same number of queues
defined by CONFIG_NET_TC_COUNT option.
Fixes#6588
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move IP address settings from net_if to separate structs.
This is needed for VLAN support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Introduce CONFIG_NET_ROUTING option that allows the IP stack
to route IPv6 packets between multiple network interfaces.
No support for IPv4 routing is implemented by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is loopback interface, then let it handle all local
traffic. Loopback interface is only needed for test applications.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can configure hostname of the device in Kconfig. This can
be used by mDNS responder to answer <hostname>.local queries.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
For IPv6 check_ip_addr in subsys/net/ip/net_core.c makes a
NET_DBG call to report when a net_pkt is missing a destination
address. An analogous NET_DBG call has been added to the IPv4
destination address checking.
Signed-off-by: John Andersen <john.s.andersen@intel.com>
The net_stack_analyze function wants to look at the stack buffer,
but it is making assumptions on where this data is that are no
longer valid. Change to use the proper APIs for referencing this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
