Commit Graph

17 Commits

Author SHA1 Message Date
Jukka Rissanen
7699563d81 net: mgmt: Use proper coop thread priority value
If user sets CONFIG_NUM_PREEMPT_PRIORITIES=0, then the priority
of the net_mgmt thread will be -1 which is the same as idle thread.
This will trigger assert in kernel as then the minimum coop priority
is -2 in this case. Remove the net_mgmt thread priority setting from
Kconfig file as it is low value and set the coop thread priority
the same way as other network threads are doing it.

Fixes #32375

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2021-02-17 16:42:15 +02:00
Jukka Rissanen
f02fd19706 net: Adjust the thread priorities
If networking pre-emptive thread priorities are enabled,
then use the proper macro to enable them.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2020-11-20 12:57:29 +02:00
Jukka Rissanen
accaab2112 net: shell: Add network mgmt events monitor support
Add "net events [on|off]" command that can be used to monitor
the generated network management events.

The monitor output looks like this when enabled:

EVENT: L2 [1] up
EVENT: L3 [1] IPv6 mcast address add ff02::1:ff00:1
EVENT: L3 [1] IPv6 mcast join ff02::1:ff00:1
EVENT: L3 [1] IPv6 address add 2001:db8::1
EVENT: L4 [1] connected
EVENT: L3 [1] IPv6 prefix add 2002:5b9b:41a0::
EVENT: L3 [1] IPv6 address add 2002:5b9b:41a0:0:fec2:3dff:fe11:c147
EVENT: L3 [1] IPv6 neighbor add fe80::9ec7:a6ff:fe5e:4735
EVENT: L3 [1] IPv6 router add fe80::9ec7:a6ff:fe5e:4735
EVENT: L3 [1] IPv6 DAD ok fe80::fec2:3dff:fe11:c147
EVENT: L3 [1] IPv6 DAD ok 2001:db8::1
EVENT: L3 [1] IPv6 DAD ok 2002:5b9b:41a0:0:fec2:3dff:fe11:c147
EVENT: L3 [1] IPv4 address add 192.168.1.69
EVENT: L3 [1] DHCPv4 bound 192.168.1.69

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2020-10-13 13:42:50 +03:00
Ulf Magnusson
378d6b137a kconfig: Replace non-defconfig single-symbol 'if's with 'depends on'
Same deal as in commit eddd98f811 ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for the remaining cases outside defconfig
files. See that commit for an explanation.

Will do the defconfigs separately in case there are any complaints
there.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2020-02-12 10:32:34 -06:00
Ulf Magnusson
bd6e04411e kconfig: Clean up header comments and make them consistent
Use this short header style in all Kconfig files:

    # <description>

    # <copyright>
    # <license>

    ...

Also change all <description>s from

    # Kconfig[.extension] - Foo-related options

to just

    # Foo-related options

It's clear enough that it's about Kconfig.

The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)

    git ls-files '*Kconfig*' | \
        xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2019-11-04 17:31:27 -05:00
Cami Carballo
7b3cd7d371 tests: net: increase stack size
fixes issues with tests/net when code coverage is enabled in qemu_x86

Signed-off-by: Cami Carballo <cami.carballo@intel.com>
2019-08-08 13:50:32 -07:00
Alexander Wachter
c204f70540 net: increase mgmt event stack size
Increase the default mgmt event stack size from 512 to 768 because of
stack overflows.

Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
2019-04-09 15:35:41 -04:00
Jukka Rissanen
a76814bfb6 net: Convert core IP stack to use log levels
Instead of one global log level option and one on/off boolean
config option / module, this commit creates one log level option
for each module. This simplifies the logging as it is now possible
to enable different level of debugging output for each network
module individually.

The commit also converts the code to use the new logger
instead of the old sys_log.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-10-04 14:13:57 +03:00
Ulf Magnusson
1073882998 subsys: kconfig: Remove 'default n' properties and clean up a bit
Bool symbols implicitly default to 'n'.

A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.

Remove some 'default ""' properties on string symbols too.

Also make definitions more consistent by converting some

  config FOO
  	<type>
  	prompt "foo"

definitions to a shorter form:

  config FOO
  	<type> "foo"

This shorthand works for int/hex/string symbols too, not just for bool
symbols.

Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
2018-07-12 23:13:22 -04:00
Tomasz Bursztyka
059fc95099 net/mgmt: Ensure that event order is kept as FIFO
Make sure also to increase in_event if only inserting event info was
properly done.
Raising also range limit in Kconfig to a much higher value.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2018-03-26 15:07:00 +03:00
Anas Nashif
8949233390 kconfig: fix more help spacing issues
Fix Kconfig help sections and add spacing to be consistent across all
Kconfig file. In a previous run we missed a few.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-02-15 23:20:55 -05:00
Ravi kumar Veeramally
49894b98e4 net: Improve net management event information
Provided separate event information structs based on events. This way
user will know what kind of information will be received to that
particular event.

Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
2018-02-02 16:50:07 +02:00
Tomasz Bursztyka
efab82232b net/mgmt: Cleanup a bit Kconfig
Remove "depends on" and replace with an if/endif.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-10-09 10:53:17 +03:00
Tomasz Bursztyka
8e25695937 net/mgmt: Make event notifiers able to pass info to listeners
Adding net_mgmt_event_notify_with_info() which lets the event notifier
to pass dedicated data along with the event. The size of data that can
be passed must be limited to the biggest data passed (which will be
currently IPv6 + prefix).

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2017-10-09 10:53:17 +03:00
David B. Kinder
ac74d8b652 license: Replace Apache boilerplate with SPDX tag
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.

Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.

Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file.  Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.

Jira: ZEP-1457

Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
2017-01-19 03:50:58 +00:00
Anas Nashif
d687a95611 kernel: move kernel code to kernel/ directly
Also remove mentions of unified kernel in various places in the kernel,
samples and documentation.

Change-Id: Ice43bc73badbe7e14bae40fd6f2a302f6528a77d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-12-19 14:59:35 -05:00
Jukka Rissanen
3eaec41ab8 net: Moved net/ to subsys/net
* Moved networking code into subsys/net.
* Renamed net/yaip to net/ip at the same time.
* Fixed the tests/net to compile
* Fixed the Makefiles and Kconfig files in subsys/net
  to use the new location of the IP stack

Change-Id: Ie45d9e8cb45a93fefdf969b20a81e3b1d3c16355
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2016-12-02 12:41:20 +02:00