These functions get called from various places and
we were observing linker errors. Always build the stubs
when userspace is disabled, gc-sections will discard them
if unused anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit adds basic userspace support to the logging subsystem.
With this change, the following API could be called from user mode:
- LOG_*()
- LOG_INST_*(),
- LOG_HEXDUMP_*(),
- LOG_HEXDUMP_INST_*(),
- LOG_PANIC(), LOG_PROCESS(),
- log_printk(), log_generic(), log_buffrered_cnt(),
- log_filter_set(NULL, ...)
With userspace disabled, the logger behavior and performance
is not affected. With userspace enabled, the calls from kernel
space have an additional overhead introduced by _is_user_context().
The logger behavior changes when it is called from the user context.
All strings logged using LOG_*() and LOG_INST_*() API from userspace
are rendered in place for security reasons and then placed in
log_strdup() memory pool, which should be large enough to hold bursts
of log messages.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The number of arguments for a format string is approximated by the
number of conversion specifications. This count may exceed the maximum
supported argument count. Limit the extraction to the available space.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Cleaning up log.h include dependencies to allow log.h including in base
headers (e.g. kernel.h).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The log_backend_swo used system clock frequency
as a base for SWO clock calculation. This commit
corrects that by obtaining the needed value from DTS.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call
to inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Simple backends, like UART or RTT, implementation is very similar.
Header has functions which can be reused by simple backends and
remove redundant code.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Logger had false assumption that once log_panic is called then
context switch will never occur and was not protecting against
reentrancy in panic mode. Added interrupt locking when accessing
unprotected part.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move uart.h to drivers/uart.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The conditional CONFIG_RISCV32 was misspelled in is_rodata() resulting
in the test failing all strings that are in RODATA section.
Additionally, it was using wrong section names for riscv.
Fixes#17065
Signed-off-by: David Leach <david.leach@nxp.com>
Log records may store either data or pointers to more records. In both
cases they must have the same size. With 64-bit pointers, the amount
of data that can occupy the same space as a pointer has to be adjusted.
And storage alignment has to accommodate actual pointers not u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Log arguments were hardcoded to u32_t values. On 64-bit systems, this
is rather restrictive. To make things clear, arguments now have their
own type, log_arg_t, which now can be adjusted in only one location
if need be. It is currently defined as unsigned long whose effective
width is equivalent to u32_t on 32-bit systems, and u64_t on 64-bit
systems.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Detection of missing log_strdup call was applied to every message
while it applies only to standard messages (string + arguments).
Appling it to hexdump messages could lead to fault as seen on
nrf9160_pca10090ns board.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If argument for log_strdup is from ro memory then there is
no point to duplicate it. This may happen if function logs
variables coming from outside, e.g. function argument.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added CONFIG_LOG_DETECT_MISSED_STRDUP (by default on) which enables
scanning of log message strings in search for %s and reports if
string address is not from strdup buffer pool and outside read only
memory section which indicates that log_strdup() wrapping is missing
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fedora 30 uses GCC 9.1 which fails to build when loggin is enabled:
zephyr/subsys/logging/log_core.c: In function ‘log_is_strdup’:
zephyr/subsys/logging/log_core.c:665:22:
warning: array subscript -1 is outside array bounds of
‘u8_t[]’ [-Warray-bounds]
665 | ((char *)buf <= pool_last->buf);
| ^~
zephyr/subsys/logging/log_core.c:52:3:
note: while referencing ‘log_strdup_pool_buf’
52 | log_strdup_pool_buf[LOG_STRDUP_POOL_BUFFER_SIZE];
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Added option profiling instrumentation which can help determine
string duplicates pool configuration. Added shell command to
read current peak utilization of the pool.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Drop mode in RTT backend was broken. It is not the default
one so most likely it was unnoticed for a long time. Fixed
to report drop message when logs are lost.
Additionally, added assert to ensure that memmove does not
do memory overwrite.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Replaced by the new CONFIG_LOG system.
Also remove the "Logging Options" menu and turn the LOG symbol into a
'menuconfig', with prompt "Logging", which appears in the top menu. LOG
and its dependent symbols make up all of the logging Kconfig symbols
now.
Piggyback some minor cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
RTT backend supports two modes blocking and drop. Apparently,
defines used lead to warning while clang compilation. Define
that caused warning has been changed together with clean up
which removed #ifdefs for definitions.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If CONFIG_LOG_IMMEDIATE is enabled, then we need to handle
the output strings using a different output function.
The issue was noticed with native_posix board where no syslog
output strings were sent to network.
Fixes#14661
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that legacy functions are removew, let's rename the new functions by
removing the _new suffix.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Log RTT backed is using mutex for locking access to RTT data.
RTT console (which by default is used by printk) writes to
RTT data directly and it cannot use mutex because it can be
called from any context (including interrupt). If both
modules access RTT buffer 0, data can be corrupted.
This patch forces LOG_PRINTK option if RTT backend is used to
ensure single point of access to RTT buffer 0 data.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Backend was not initialized to work in synchronous mode if LOG_IMMEDIATE
was enabled. That causes use of rtt_lock which uses mutex. That lead to
assert in application.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
when building with clang we get the following warning:
log_core.c:358:40: error: use of logical '&&' with constant operand
[-Werror,-Wconstant-logical-operand]
This is because we are mix a constant IS_ENABLED(CONFIG_LOG_IMMEDIATE)
with non-constants.
Split out the check into its own statement to workaround the warning.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
In case it was detected that RTT host was not present
backend was still performing single sleep or busy wait
round before dropping data. That was degrading log
processing performance.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If system clock runs fast k_cycle_get_32(), which is the timestamp
source, wraps often (few minutes). This patch changes default
timestamp function to use k_uptime_get_32() if system clock
frequency is higher than 1 MHz and k_cycle_get_32() otherwise.
If system clock runs at 1 MHz, counter will wrap every 71.5 minutes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Previously, _prf function was used when present and _vprintk
was used otherwise. _prf supports reacher formatting but at
cost of 3k flash and >250 bytes on stack. Stack usage then
depended on which function was used and that was causing
troubles when trimming stack sizes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added an assert in the logger thread in case there
is no backends, instead of having that thread spinning
forever. Disabled log in qemu_xtensa board due to lack
of backends.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There was no notification about dropped logs When logger operated
in the mode where message is dropped when logger has no space to
store the message. Notification was printed only if logger operated
in the mode which overwrites oldest log.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Macros are replaced by C++ friendly versions:
- SHELL_CREATE_STATIC_SUBCMD_SET by SHELL_STATIC_SUBCMD_SET_CREATE
- SHELL_CREATE_DYNAMIC_CMD by SHELL_DYNAMIC_CMD_CREATE
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
In case log_panic is called from context which can be
interrupted, it is safer to set panic_mode flag after
logs are flushed. If flag was set before flushing and
log_panic was interrupted then another context was
attempting to process log message directly, competing
for log backends.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When optimizations are disabled more RAM is used and we get a stack
overflow on CONFIG_LOG_PROCESS_THREAD_STACK_SIZE. To rectify this,
increase the stack size when CONFIG_NO_OPTIMIZATIONS.
This does not scale well, and will have to be replaced by a a more
general solution eventually, but in the mean time it follows the
existing best practice established by the GCOV infrastructure in
commit e908ea9aa5
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The new Logger subsys uses a very robust formatter function in minimal
libc: _prf(). This adds up to ~3K flash. For resource constrained
devices running samples that don't use the extra formatting options,
allow them to select LOG_DISABLE_FANCY_OUTPUT_FORMATTING to revert
back to vprintk.
MCUBOOT is one such sample that has a very limited amount of output
and benefits from the flash savings due to small bootloader partition
sizes.
Signed-off-by: Michael Scott <mike@foundries.io>
Log backends (marked as autostart) are initialized late. By default
in logger thread which has the lowest priority. If log_panic() occurs
earlier no logs is printed because there is no backend enabled.
This patch fixes it by adding log_init() call to log_panic(). Log_init()
can be called multiple times.
This patch ensures that logs are printed if early panic occurs if
backend is configured to auto-start. This is not the case if shell
is acting as log backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
RTT log backend was locking in panic if host absense was not yet
detected (early panic). It is fixed by adding detection of host
absense while pending on data being read by the host.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended native posix backend to support new backend API for
'in place' mode.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added functions for processing log string and hexdump. Details
are passed as function parameters and not as log_msg. Those
functions can be used when logger works in synchronous mode
and log messages are not created.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Changed 'in place' mode to bypass logger system and directly
call active backends. With this approach memory footprint of
the logger can be significantly reduced in terms of RAM and ROM.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Dropped logs were not counted if logger has no backend
attached (system startup phase).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It may happen that panic occured while logger backend
was formatting output data. In that case output buffer
could get corrupted as logger assumes that processing
happens in one context only (panic is the only exception).
Added log output buffer flushing on entering panic state.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit adds Serial Wire Output (SWO) logger backend. SWO is an
extension of Serial Wire Debug (SWD) port developed by ARM.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
MISRA-C has several rules about switch statements like each clause
end with an unconditional break. This commit fix these problems to
be in accordance with the standard.
MISRA-C rules 16.1, 16.3 and 16.4
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Refactored blocking operation of RTT backend. Log_output buffer
is used directly in case of blocking operation. Detection of
host presence added. Prevent use of RTT lock when in panic mode.
Removed pending on data being read by the host on every message.
Refactor gives savings of 300 bytes in ROM and 120 bytes in RAM.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
According with MISRA-C the value returned by a non-void function has
to be used. As memcpy return is almost useless, we are explicitly
ignoring it.
MISRA-C rule 17.7
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Extended log_output interface to handle dropped
messages. Log_output is printing a message containing
number of dropped messages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended logger configuration to allow function name prefix for
messages with certain severity levels. By default only debug
messages are prefixed with function name.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Generic log message allocator was wrongly allocating single
chunk messages as initially it was intended to allocate only
multichunk messages. It resulted in invalid pointer being freed
on log message free. Issue detected by valgrind.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removed printing command help from help handler. It is now
realized by the shell engine. This change saves a lot of flash
but still allows to print help in command handler with function
shell_help_print.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Fix issue caused by 3fc497ac9a
This change removes `rtt` and `systemview` from header includes
as these are already placed in the path.
Also `SEGGER_SYSVIEW_ConfDefaults.h` header included from
`SEGGER_SYSVIEW_Int.h` is placed higher to make sure `INLINE`
definition is properly visible.
Signed-off-by: Pawel Dunaj <pawel.dunaj@nordicsemi.no>
Shell log backends were initialized from shell context. After
lowering logger thread priority order has been flipped. That
revealed a bug where shell logger backend was enabled before
backend ID's has been assigned during logger initialization.
ID assignment is moved to log backend enabling function making
it independent of order of initialization.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Allow logging subsystem to send the logging messages to outside
system. This backend implements RFC 5424 (syslog protocol) and
RFC 5426 (syslog over UDP).
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Timestamp function and pool for log_strdup were initialized
in log thread initialization while they should be initialized
in log_core_init() which is performed earliest possible. Log
API was using uninitialized data when called before log thread
was started.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended backend interface to allow notifying backend
that log messages has been dropped due to insufficient
internal buffer size. Notification contains number of
log messages dropped since last notification. It
is optional for a backend to implement handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If USE_SEGGER_RTT option was enabled then LOG_BACKEND_RTT was
enabled by default. In case shell RTT was also used then both
write to RTT. Updated Kconfig to prevent such situation.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removed kconfig option for setting logging thread priority
and fix it to K_LOWEST_APPLICATION_THREAD_PRIO.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Description is improved, guidelines for when increase is required are
provided, together with associated overheads information.
Fixes: #11007
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Don't say that pool is empty, say that allocation failed, because
that's what happened (because the pool is full apparently).
Partially addresses #11007.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The function atomic_set return the previous value of the
target. Sometimes this value is irrelevant, e.g when initializing a
variable.
As MISRA-C rule 17.7 requires that the value returned by a non-void
function must be used, we have to explicitly ignore some cases.
MISRA-C rule 17.7
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Log_output module was always postfixing printk strings
with '\r'. If printk message did not ended with '\n'
it lead to last printk message being overwritten.
Fixed by adding '\r' only when string was ended by '\n'.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Modified log_filter_set function to limit level if requested
level is not compiled in. Additionally, extended function to
return actually set level. Removed redundant code from log_cmds.
Change fixes shell log backend initialization which was setting
log levels without taking into account compiled in limits.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If shell UART backend was enabled and logger uart backend was
not explicitly disabled then both were used resulting in logs
being printed twice on terminal.
Patch modifies default state of log uart backend to depend on
state of shell uart backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Currently, if CONFIG_LOG_PROCESS_THREAD is enabled, log processing
does not start until just before the main() function is called in
the user sample. This means that no real-time logging information
will be sent to the backends while drivers and/or other processes
which are triggered during kernel boot are processing their tasks.
Worse, if they take a longish time to finish, the user is
presented with a blank log backend regardless of the debug levels.
Let's start processing logs earlier to avoid this issue.
NOTE: Since this thread is now triggered specifically rather than
started during static thread init, let's also name it.
Signed-off-by: Michael Scott <mike@foundries.io>
According with MISRA-C and unconditional break statement must
terminate every switch-clause.
MISRA-C rule 16.1 and 16.3
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix misspellings in Kconfig files that show up in the configuration
documentation (and make menuconfig screens).
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
We are getting all of those Kconfigs related to logging even without
having logging enabled, make the variables depend on LOG for all users
of the template.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When a RTT logger backend is configured to blocks, allow other threads
to continue during waiting for data to be transferred to host.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
Extended support in the log_core and log_output to 15 arguments
which is the hard limitation of log message format.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Log_generic() can be used by external logger systems to map to zephyr
logger subsystem. Function has variable number of arguments. So far
logger assumed maximal number of arguments to avoid scanning
string to count number of arguments. In outcome, uninitialized memory
was treated as valid argument in a message (but discarded when actual
string formatting took place). Valgrind complained about that so
log_generic() has been extended to scan the string and count number
of arguments and build message with valid number of arguments.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
As RTT is used by more subsystem in Zephyr, initialization is moved
from RTT console and RTT logger backend to common kernel init phase.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
Fix grammar in subsys/logging/Kconfig
Fix grammar in subsys/logging/Kconfig
Fix grammar in subsys/logging/Kconfig
Fix grammar in subsys/logging/Kconfig
Signed-off-by: David Kinder <david.b.kinder@intel.com>
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
This option allows to explicitly include Segger RTT libraries and
enables use of it for various subsystems. It is disabled by
default as it consumes more RAM.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
Add logger backend that uses Segger RTT for message output. Several
options are provided allowing configuration of up-buffer and logger
behaviour.
Signed-off-by: Pavel Kral <pavel.kral@omsquare.com>
log_strdup requested for a piece of memory, with the first 4 bytes as
the number of references and the next used to copy strings. In the
implementation of this function, the memory is managed by user and
is a little hard to understand.
Rewriting this part of code, using structure to manage the memory
requested, make it easier to understand.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
log_strdup writes out of bounds of a strdup slab.
e.g: CONFIG_LOG_STRDUP_MAX_STRING=46 and
LOG_STRBUF_STR_SIZE=47 then in the line L:529
sdupl[LOG_STRBUF_STR_SIZE - 1] = '\0';
writes out of bounds because the available buffer space
is only 44 bytes (rounded up to 48 bytes and minus 4 bytes
for the allocated flag).
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Extended logger to support optional log message prepending with
function name.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended supported number of arguments in log message. Support for
messages consisting of more than 2 chunks had to be added. So far
messages could consist of one chunk (up to 3 args) or two chunks
(2 args in first chunk and 7 in second chunk). Once 2+ chunks
support is added number of arguments is techinically limited to
15 (4 bit field). log_core and log_output extended to suppor 10
arguments.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add 2 new flags to control the output of newlines by the logger output
module. By default the logger adds both CR and LF, and with these 2 new
flags it is now possible to request LF only or no newlines at all.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In initial state of the system it is possible that no backends are
yet enabled and log processing is triggered. In that case logs were
discarded. A flag has been added to the log core to do processing
only if at least one backend is enabled. It is applicable only to
initial phase. If backends are disabled in application lifetime
logs will be discarded.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Extended macro to accept flag indicating if given backend must be
initialized and enabled when log subsystem starts. Typically, simple
backends will have autostart flag set. More complex may require
explicit enabling (e.g. shell over BLE can only be enabled when
BLE connection is established).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
We are using a non-32-bit aligned value as the block size
when initializing the strdup mem_slab for Logger.
When the non-aligned pointer is being freed, it's converted
to a u32_t and this generates the following:
***** USAGE FAULT *****
Unaligned memory access
Let's use the aligned buffer size as the block size instead.
Signed-off-by: Michael Scott <mike@foundries.io>
The string parameter needs to be const as otherwise calling this
function using a const string pointer will lead to a warning.
Besides the function does not modify the parameter so should be
const anyway.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
1. Command handler can return command exectution status as int.
2. Existing command handlers rework.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Extending logger to support logging transient strings (with %s).
With dedicated call (log_strdup), string is duplicated to a buffer
from internal logger pool. Logger implicitly manages the pool.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added flag in log_output module to add timestamp when message is
formatted to a string. Updated existing backends.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added flag in log_output module to add severity level when message is
formatted to a string. Updated existing backends.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
After the recent change in `struct log_backend_api` (ie: add
of `init` function), init function can be marked as `static`
as it is only used in the scope of the file.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
Fix merge error introduced in:
ba01a3952f
(as part of #9362)
which deleted the native_posix backend for the logger.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Added commands for getting current status and controlling which log
messages are forwared to available backends.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
For the native_posix backend, use the appropiate tracing
functions and enable color if it should be
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
When CONFIG_LOG_PROCESS_THREAD was not set the logger
was not initialized.
Register a POST_KERNEL init for that case.
Also added an assert in the logger thread in case there
is no backends, instead of having that thread spinning
forever.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Module refactored: splitted data into read-only part and control block,
adding macro for creating log_output instance
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
