Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
ELM FatFS implementation supports LFN, enabled via ffconf.h
configuration file. Additionally, code page (character set),
max file name length, and memory mode (LFN working buffer location)
are configurable options closely related to LFN.
Without LFN filenames are restricted to 8.3 filename format.
Add kconfig options to expose following FatFS configurations:
enable LFN, specify max filename length, specify code page
(character set), specify LFN working buffer location.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
NFFS is removed as it has serious bugs (by design) which haven't
been resolved since extended range of time.
One of most serious issues bunch were described here:
https://github.com/apache/mynewt-nffs/issues/10
Since lack of support NFFS upsterem it doesn't make sense to keep
it in zephyr.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In nvs writing addresses are u32_t. Coverty reports two situations
where the address could be converted (unwanted) to a signed value.
Both have been corrected.
There is however a general problem with flash API where the addresses
are defined as off_t which is a s32_t. These are converted in the flash
hal to u32_t. As a result of this only half of the possible range can
be used.
Solves #20867 and #20866
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Fix for not served error code in fcb_offset_last_n()
implementation.
Issue was reported by static code analyze scan.
Looks like the function might have failed silently
if aggressive access to the fcb instance
from another thread have been occurring while the function
have been processing the fcb storage.
fixes#20512
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The Zephyr fs readdir abstraction returns OK with a zero-length file
name when the last directory entry has been found. The loop to build
multiple entries instead checked for a non-file entry type.
Correct the loop exit condition.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The FatFs f_readdir function returns OK with a zero-length file name
when the last directory entry has been found. The Zephyr wrapper
unconditionally accessed fields that are left uninitialized in that
situation, propagating garbage values to the caller.
Avoid referencing uninitialized fields of the output structure in this
case.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Unused since commit 7d2e59813f ("subsys: fs/nvs: Rewrite for improved
robustness").
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
When overwriting an NVS item with data that was a truncated version of
the existing data, the "is this already saved" logic was ignoring the
differing lengths and not saving the new item because the data matched.
Fixes#19250
Signed-off-by: Justin Brzozoski <justin.brzozoski@signal-fire.com>
Switch form using privater FCB error codes to
errno codes. FCB private codes convention were compatible
with <errno.h> codes:
- 0 mean success
- negative values mean errors
- similar error types.
There was no sense to kept private FCB error codes.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Move the inclusion of the littefs Kconfig options inside the
'if FILESYSTEM' block so we don't leak Kconfig symbols if FILESYSTEM
support isn't enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make sure that the last entry added is deleted correctly by storing the
fact that one was found in a local variable.
Fix by Laczen JMS <laczenjms@gmail.com>
Fixes#18813.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Increase temporary buffer size to 8 bytes in fcb_append to prevent
stack overflow in case flash alignment is bigger then 2 bytes.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Closes#18392 by asserting and returning an error if the block size is
not positive.
Closes#18458. The diagnosis here was not relevant as an in-range EOS
is written before the buffer is used, but using the non-terminated
length is slightly more clear about intent and may avoid a read overrun
of the mount point.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
No need to write deletion entry for non-existing entry.
Furthermore such a write to filled up storage will make another
writes impossible as it occupied delete nvs_ate space, but it
does not remove anything.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
During initialization NVS analyzes open sector for
find write addresses. It was possible to infinite loop
in case when there was no space for any new ATE in the sector.
This patch introduce check for space available in the sector which
fix the issue.
fixes#17891
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
NVS always leave space for deletion ate in a full sector.
Even that it was not possible to write delete nvs_ate to the
full sector. Because of that it was possible to fill up NVS,
and be able to delete nothing.
This patch introduce recognition of case
the delete ate is writing, and allow to write such nvs_ate to
opened full sector.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Previous ATE searching is accelerate by reading sector
close ate, which allow to skip reading whole storage.
ATE is already covered by crc8. That patch introduce
check on correctness offset read form close ate. This
increases meta-data integrity check level.
This also preserves against possible looping when read
incorrect or not a NVS storage image.
fixes#16899
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
There's desire to be able to customize parameters on a per-filesystem
basis, which means we need a way to override the Kconfig defaults which
are global. This also means the littlefs data structure cannot own the
cache and lookahead buffers.
Switch to using a macro to define the littlefs data structure. The
default version uses the Kconfig constants. A custom one takes
arguments providing the most likely partition-specific parameters.
Finally the user is free to bypass the helper macros and set any
parameters desired, though validation is limited and only present when
CONFIG_DEBUG is enabled.
Extend the test suite with a performance module, which confirms that
these settings have an impact proportional to the log of changes to the
cache or IO sizes.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Existing file system implementations do not provide the special "."
(current) and ".." (parent) directory entries in the readdir results.
littlefs does.
Remove these entries in the abstraction layer. This simplifies code in
higher level consumers that aren't prepared to see them. Consumers like
FUSE that need them can put them back without having to worry about
conflicts.
Closes issue #17951
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The previous way of creating an absolute path relied on snprintf(), and
when used with newlib gcc warned that the output could be truncated
before the last format character. Rework to use code that doesn't rely
on snprintf.
See discussion at https://bugzilla.redhat.com/show_bug.cgi?id=1431678
Also ensure that cwd is always NUL-terminated, and use the utility
function to create the absolute path in cmd_trunc.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add support for the littlefs file system in the fs shell. Update
the sample to use the same partition configuration as the littlefs
example for the SPI NOR test platform.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
littlefs is a fail-safe filesystem from ARM Mbed that has wear-leveling
capabilities.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Jim Paris <jim@bolt.io>
The sector size is 0 will pass "fs->sector_size % info.size" then start
a loop in nvs_startup() and never return. So retrun an error if the
sector size is 0.
Signed-off-by: Harry Jiang <explora26@gmail.com>
This will list all mount points in response to opendir("/").
This isn't perfect; mount points in subdirectories will show up as
their full path in this listing. But it's better than just returning
-EINVAL.
Signed-off-by: Jim Paris <jim@jtan.com>
File system API functions that operate on paths are passed both the
absolute path including the mount point prefix, and the mount point
within which the path lies.
Unfortunately it's not entirely trivial to convert an arbitrary path
within the file system space to an absolute path within its mount point,
because the path may be to the mount point itself and not end with a
directory separator. The effect is that a file system implementation
like nffs may be given an empty path when "/" is required.
Add an implementation module that does this transformation and use it to
transform paths within each filesystem wrapper.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move crc.h to sys/crc.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move nvs/nvs.h to fs/nvs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fcb.h to fs/fcb.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fs.h to fs/fs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There isn't a function to handle the unmount, so I implemented based
in f_mount comments. In the comments of f_mount we actually have
that f_mount is used to mount/unmount logic, is just necessary use
NULL pointer to fs argument.
Signed-off-by: Lucas Peixoto <lucaspeixotoac@gmail.com>
This patch fixes following bug:
After first GC operation the 1st sector had become scratch
and the 2nd sector had became write sector. After that NVS
was initialize (via reboot) again - it recognized the 1st
sector as write sector and 2nd as undone GC destination sector,
therefore it cleared 2nd sector and re-run GC, which implied data loss.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Aligned format specifiers for the NVS FS. Now, the format specifier
matches the variable type for qemu_x86 types.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in the subsys/ subdirectory except
for static _mod_pub_set and _mod_unbind functions in bluetooth mesh
cfg_srv.c which clash with the similarly named global functions.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Remove use of select to "force" enabling other configs in subsys/fs
and subsys/net/l2. The forcing will cause infinite kconfig recursion.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Inside cmd_read(), result of fs_seek() is not checked which might
result in reading the wrong part of file. So fails the read if
fs_seek() fails.
Fixes#13862
Fixes CID-190953
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch removes the free space calculation from nvs initialization.
The available space can be calculated if required using the routine
nvs_calc_free_space.
This patch also removes the locked state of nvs, it is not possible to
get in a locked state.
This patch adds an extra check on the sector_size configuration and only
allows operation on nvs when nvs has been initialized.
This patch also solves issue #13369, the usage of FLASH_ERASE_BLOCK_SIZE
has been replaced with the flash page api.
Changes:
Removed locked state and free_space from the nvs structure.
nvs_reinit(): has been replaced with by an internal only function
_nvs_startup().
nvs_write(): removed the possibility to place the file system in a
locked state, if to many gc operations are required it will return
-ENOSPC.
ssize_t nvs_calc_free_space(): introduced, calculates the free space
that is available in the nvs file system.
Removed define LOG_LEVEL.
Rebased to current master.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
This patch removes the free space calculation from nvs initialization.
The available space can be calculated if required using the routine
nvs_calc_free_space.
This patch also removes the locked state of nvs, it is not possible to
get in a locked state.
Changes:
Removed locked state and free_space from the nvs structure.
nvs_reinit(): has been replaced with by an internal only function
_nvs_startup().
nvs_write(): removed the possibility to place the file system in a
locked state, if to many gc operations are required it will return
-ENOSPC.
ssize_t nvs_calc_free_space(): introduced, calculates the free space
that is available in the nvs file system.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Commit 41f86c3db2 ("nvs: fix warnings in logger") wrongly changed the
"%d" into "%x" while it was only supposed to suppress the warning.
This patch switches back the format string to "%x".
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When compiling NVS with NEWLIB_LIBC=y, GCC outputs the following
warning:
In file included from $ZEPHYR/include/logging/log.h:11:0,
from $ZEPHYR/subsys/fs/nvs/nvs.c:17:
$ZEPHYR/subsys/fs/nvs/nvs.c: In function 'nvs_init':
$ZEPHYR/subsys/fs/nvs/nvs.c:748:10: warning: format '%lx' expects
argument of type 'long unsigned int', but argument 3 has type 'u32_t
{aka unsigned int}' [-Wformat=]
LOG_INF("alloc wra: %d, %" PRIx32 "",
^
fs->ate_wra and fs->data_wra are both defined as u32_t, so they need to
be printed with '%d'.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Following the recent NVS changes, the following warning now appear with
GCC 7.3 when building with -O2:
ZEPHYROOT/subsys/fs/nvs/nvs.c: In function 'nvs_reinit':
ZEPHYROOT/subsys/fs/nvs/nvs.c:92:36: warning: 'addr' may be used
uninitialized in this function [-Wmaybe-uninitialized]
offset += fs->sector_size * (addr >> ADDR_SECT_SHIFT);
~~~~~~^~~~~~~~~~~~~~~~~~~
ZEPHYROOT/subsys/fs/nvs/nvs.c:606:8: note: 'addr' was declared here
u32_t addr;
^~~~
This was already reported by Coverity earlier as CID:187903.
In practice this can only happen if fs->sector_count equals 0, which is
not possible as checked in nvs_init(). At least in the GCC case, it
believes that k_mutex_lock(&fs->nvs_lock, K_FOREVER) could modify
fs->sector_count.
Workaround the issue by initializing addr to 0.
Fixes#9767
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The current NVS code checks for an empty ATE using th
_nvs_flash_cmp_const() function. This function loads the data and
compare them to a value. This means that when executed multiple on the
same area, the data get reloaded multiple time. This might have a
noticeable performance impact with an SPI flash.
Instead define a function _nvs_ate_cmp_const to compare an already read
struct nvs_ate with a constant value. Then replace the calls to
_nvs_flash_cmp_const() on struct nvs_ate by _nvs_flash_ate_rd() followed
by _nvs_ate_cmp_const(). This also has the advantage of explicitly
checking for errors instead of testing the error and the result of the
comparison at the same time.
Tested on a Nucleo L432KC board with the nvs sample. The maximum
initialization time (ie just before running the first garbage collector)
goes down to 6213 µs from 7350 µs.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
NVS with modified flash layout. At the end of a sector a special ate is
placed that points to the last ate that was written. This special ate
is written when a sector is closed. This allows nvs to travel through
the fs much quicker as it doesn't have to search for the last ate in
a sector.
This modification also speeds up the nvs_init procedure that was very
slow on external (spi) flash.
Remark: As the layout of data in flash is changed old data in the flash
cannot be recovered. It is advised to erase the nvs flash area before
using the changed nvs.
Modification after review by @nvlsianpu applied
Modification after review by @aurel32:
_nvs_prev_ate(): provide a backup search of a valid ate when the sector
close_ate has a bad CRC8. Tested on nrf81522 by making flash writing
bad data to the sector closing ate. Also validated that if a valid ate
is overwritten the filesystem keeps working.
_nvs_gc(): return error if _nvs_flash_cmp_const() is < 0.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The Atmel SAM E70 flash has a 16-byte write block size. Increase the
NVS_BLOCK_SIZE a bit and take some margin. This might also improve the
performances by reducing the calls to the flash driver when moving data
during garbage collection.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When the write block size is bigger than sizeof(nvs_ate), which is 8
bytes, we should not read or write more than the ATE. The
_nvs_flash_al_wrt() function will take care of padding the write with
0xff up to write_block_size. Of course the addresses should still be
incremented by write_block_size.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
VLA are usually not recommended and are a MISRA C violation. Replace
fs->write_block_size by NVS_BLOCK_SIZE as we now have a check at
initialization that ensures that fs->write_block_size <= NVS_BLOCK_SIZE.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In case the write block size is bigger than NVS_BLOCK_SIZE, some
functions end up in an endless loop. Detect the unsupported cases
at initialization.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We had the if in the wrong place causing some Kconfigs to be set even if
filesystem was not configured in.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In case a write to the flash failed, do not leave the flash unprotected.
Always call flash_write_protection_set in that case.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Avoid unsetting and setting the flash protection if there is nothing to
write to the flash. This happens for example when deleting data from the
flash using nvs_delete.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
