Be consistent in the permission handling of the discovered attribute
in the temporary object given in the discovery callback.
For characteristics the permission field was set to READ, while for
all other attributes it was set to 0.
Fixes: #29083
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update check in the bt_gatt_attr_value_handle API function to use the
UUID of the function, in case the attribute has been declared with a
different read handler, or the attribute is a temporary object
where the read attribute has not been set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor use of 16-bit common GATT UUID types where a complete UUID
object is declared on the stack only to use the 16-bit value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Reduce the size of the disconnect pool required the full MTU
for a disconnect request.
Also completely remove the pool when not needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Don't use the ATT structs that has contains only a flexible array
member. This is not supported by C99 standard, only through GNU C
extension with zero length array.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changes the callbacks for periodic sync callbacks such that multiple
applications can register callbacks, similar to the connection and
scan callbacks.
This change will make it easier to support the PAST feature, as
PA syncs make be created by the controller which then notifies
the host, and thus the application (if callback registered).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
The scan callbacks may be NULL, which would cause an error if
e.g. the timeout callback wasn't set and the scan terminates after
a timeout.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In bt_set_name we already get name length so let's use it in strncpy
Also fix warning with enable -Wstringop-truncation
Signed-off-by: Ilya Averyanov <a1ien.n3t@gmail.com>
Instead of doing slow (non-fast) scan when syncing to
a PA, it will now do a fast scan, which drastically reduces the
time it takes to create the sync. The application may
still do explicit slow scan if wanted.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the application cancels the PA sync, it would update
the scan before clearing the BT_PER_ADV_SYNC_SYNCING flag
which cause the scan to always start again.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix bt_le_oob_get_local and bt_le_ext_adv_oob_get_local stuck forever
waiting for the sc_local_pkey_ready semaphore when SC HCI commands
are not supported in the controller.
By using the le_sc_supported helper function the runtime check of HCI
commands and the feature check of CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY
is combined to be handled int the same way.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the le_sc_supported helper function up in the source file so that
it can be re-used in other places without a forward declaration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
If hannel don't have alloc_buf and the RX MTU is configured to require
segmentation this warn the user and truncate the RX MTU.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Accourding to the spec the CCC descriptor may occur in any position
within the characteristic definition after the Characteristic Value.
Fixes#28324
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix bug in device name shortening handling leading to memory
corruption.
This is triggered by an underflow in the length field of the shortened
name when set_data_len + 2 > set_data_len_max.
Fixes: #27693
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Ignore error when failing to set the passive scanner private address.
This can happen because in between the time we checked if the
advertiser was enabled and the time we execute the set random address
command the state of the advertiser could have changed in the
controller, and we only set the state once the command has completed
in the controller.
Fixes: #25672
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix not setting NRPA before starting scanner.
Occurs with BT_PRIVACY=n and BT_EXT_ADV=y
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Re-structures the `bt_conn_recv()` to support more generic appending of
new ACL data. This also handles the possibility of receiving 0-length
ACL_START and ACL_CONT fragments, whilst maintaining existing
error-checking functionality.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Fixes issue #26900.
A controller may fragment an L2CAP SDUs in any way it sees fit,
including fragmenting the L2CAP header. Likewise, the receiving
controller may send the fragmented header as ACL data to the host.
The Zephyr host assumed that a `BT_ACL_START` was at least 2 bytes long,
and consequently read the two-byte length field from the buffer without
length checks.
This commit allows the `BT_ACL_START` to be less than two bytes,
updating the `conn->rx_len` onces the `BT_ACL_CONT` with the remaining
part of the length field has been received.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
When attempting to bind a channel if it fails the code will attempt to
cleanup calling bt_iso_cleanup which expects connections of
BT_CONN_TYPE_ISO.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ISO connection does not initialize its tx_complete_work nor it uses for
anything so calling into tx_notify will likely cause a crash.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
the adv instance should be delete correctly if advertise fail,
Otherwise the instance will unable to allocate if start the legacy again
Signed-off-by: chao an <anchao@xiaomi.com>
Add back call to LE Write Suggested Default Data Length
command so that new connections, receiving Data Length
Update procedure before local device can auto initiate, can
respond with the suggested default data length Tx octets
and Tx time.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This introduces bt_gatt_attr_get_handle which can be used to resolve
handles of static attributes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Make it actually give the original pointer to the attribute and its
resolved handle so static attributes don't need an extra lookup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This optimizes the lookups to skip ahead when attribute pointer is not
located within service array.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds supports for ISO packets so then can be transmitted and
received with hci_raw driver.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Allow the application to add subscription without resubscribing.
This is needed for persistent bonds that can go to deep sleep and
turn of the RAM or power-cycle.
In this case the application as a GATT client must have a way to add
the subscription callbacks back to the stack before the GATT server
sends notifications.
This should preferable be able to be done before even connecting
since the notifications can arrive immediately after connecting to
the peer.
The stack cannot persist this on it's own since it must remember the
function pointers for the callback functions. Storing these in
persistent storage would not be compatible with a Device Firmware
Upgrade (DFU) solution.
Fixes: #21798
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor the gatt_sub_add function to be similar in structure to how
find_cf_cfg is implemented. This is so that a subscription can be added
without an active connection.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add handling of the HCI_Hardware_Error event to log the hardware code.
This event was unmasked in set_event_mask.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When lazy loading of CCCs are enabled there is no settings set handler
register for the 'bt/ccc' key, this means that the settings set handler
for 'bt' key is called instead. This handler does not know what to do
for the 'ccc' subkey, and returns -ENOENT for the entry.
This results in an error message logged by the settings subsystem.
"E: set-value failure. key: bt/ccc/f8c39e2f98210 error(-2)"
Fix this by providing an empty handler for the 'bt/ccc' key when
Lazy Loading feature is enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix periodic advertising delete implementation, to not
NULL the callback pointer when deleting the instance so
that the application's terminate callback can be called
thereafter.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A build assert in dummy.c lists the following requirement:
[...] receive thread priority shall be higher than the Bluetooth
Host's Tx and the Controller's receive thread priority.
This is required in order to dispatch Number of Completed Packets
event before any new data arrives on a connection to the Host threads.
The drivers uses a priority that is equal to the Host TX thread,
and since they don't use the CONFIG define that is only available
to the controller then this BUILD_ASSERT will not catch the
requirement.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added a callback that lets an application get write error
(if any) when subscribing to a gatt characteristic.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Fix option USE_IDENTITY for bt_le_ext_adv_* API.
The random static identity address that was set in bt_le_ext_adv_create
was overwritten in bt_le_ext_adv_start in the call to
le_adv_set_private_addr.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
enable CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY:
In function `bt_le_oob_get_local':
subsys/bluetooth/host/hci_core.c:8878:
undefined reference to `bt_smp_le_oob_generate_sc_data'
Signed-off-by: chao an <anchao@xiaomi.com>
The PA sync is now "deleted" (i.e. flags reset) before
the terminated callback is called, so that is
possible to create PA sync in the callback. One flag
was already cleared before for this reason, but one
other flag is also required, so we just clear
everything now.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Removed the check for explicit scanning, such that
an application may create a PA sync while explicitely
scanning.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
If `CONFIG_BT_CENTRAL` was enabled and the device was not scanning
or connected, then `bt_le_per_adv_sync_create` would not start
scanning for periodic advertisers.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Mark the ram version of the ccc_cfg as free after ccc has been
stored when a bonded device disconnects.
If the device use lazy loading of settings then ccc_cfg was not
cleaned up properly when a bonded device disconnects. This
resulted in the ccc system ran out of ccc_cfg resources after
having disconnected CONFIG_BT_MAX_CONN times.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
Step1: Move bt_gatt_disconnected() to avoid forward declarations which
otherwise would be needed by a fix to lazy loading cleanup on
disconnect in step 2.
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
Since bt_l2cap_send_cb can fail returning its error is not enough as
the buffer has been modified to add the headers, so this save the state
before calling bt_conn_send_cb and takes a reference so it can be
restored its original state in case of error.
Fixes#27434
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Elevate connections always to security mode 1 level 4 when
Secure Connections Only Mode has been enabled in the Security Manager.
Elevate connections always to security mode 1 level 3 when
Legacy pairing with OOB only has been enabled in the Security Manager.
Fixes: #27338
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
If CONFIG_BT_EXT_ADV was enabled but
CONFIG_BT_EXT_ADV_LEGACY_SUPPORT was disabled and
CONFIG_NO_OPTIMIZATIONS was enabled, then there was a
maybe-initialized warning. Fixed by adding additional
checks.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move call to reset_pairing to bt_conn_security_changed, since this
should always be done at the same time, and should be done in the same
order for all calls. For auth_complete this was reset after the
callbacks, which is inconsistent with the other events.
Also call it even if not connected anymore, the disconnection complete
event will be delivered after this event. Callback should alway be
called if security was initiated.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added support for syncing to periodic advetisements.
The API and usage is heavily inspired by the extended advertisement
and connection APIs.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added the ext adv report interval to bt_le_scan_recv_info which
denotes whether or not there is periodic advertisement data
associated with the advertisement report.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added API to set periodic adv parameters, periodic adv data
and to enable/disable periodic advertisement.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
It does not auto-initiate the DLE procedure if the default data length
parameters are not equal to the initial parameters.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Some controllers do not follow the recommendation of auto-initiating
a data length update if the host writes default data length parameters.
If the controller follows this recommendation, calling
LE Write Suggested Default Data Length command is sufficient
to ensure that the LL will auto-initiate the DLE procedure. Performing
a second procedure is unecessary.
In Core v5.2, Vol 4, Part E, Section 7.8.35:
The HCI_LE_Write_Suggested_Default_Data_Length command allows the
Host to specify its suggested values for the Controller's maximum
transmission number of payload octets and maximum packet
transmission time for packets containing LL Data PDUs to be used
for new connections. The Controller may use smaller or larger values
for connInitialMaxTxOctets and connInitialMaxTxTime based on local
information.
In short, this command sets connInitialMaxTxOctets
and connInitialMaxTxTime.
In Core v5.2, Vol 6, Part B, Section 4.5.10:
For a new connection: connMaxTxOctets shall be set to
connInitialMaxTxOctets and connMaxRxOctets shall be chosen by the
Controller. If either value is not 27 then the Controller should
initiate the Data Length Update Procedure at the earliest practical
opportunity.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fix issue with bt_gatt_service_unregister not clearing CCC information.
If the service is unregistered while an unbonded peer is connected and
subscribed then this CCC would be restored again when registering the
service even if the peer is now disconnected.
If the service is unregistered with bonded peers CCCs stored in settings
then this value would never be cleared. If the service is registered
again then the peer would receive a service changed for this service,
but it's CCC value would still be enabled.
Fixes: #26924
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Extract enqueue of GATT CCC when CONFIG_BT_SETTINGS_CCC_STORE_ON_WRITE
is enabled to a helper function gatt_ccc_conn_enqueue so that it can be
reused.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the clear_ccc_cfg function further up to be re-used without a
forward declaration in bt_gatt_service_unregister.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Notify L2CAP when pairing procedure fails during SMP pairing
process. L2CAP needs to be notified so that it can cancel
ongoing connection-oriented channel requests.
Rename bt_l2cap_encrypt_change to bt_l2cap_security_changed and
call it from bt_conn_security_changed always, so that L2CAP
is informed when changing security fails.
This also fixes security_changed conn callback not called when
auth_complete returns an error.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Avoid warning in att_handle_rsp, only call this when there is a
pending ATT request. This avoids a warning happens when elevating
security fails but higher security had not been requested by an
ATT request.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
squash! Bluetooth: ATT: Remove warning when no ATT process pending
Elevate the security level before sending the connection request if
the application has set a required security level on the channel.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Elevate the security level of the connection when the l2cap channel
connect request is denied with encryption or authentication error
code.
The l2cap channel required_sec_level was used, but this is not
correct as this is set by the user of the API. This resulted in
the call to bt_conn_set_security seeing that the current security
level was already set, decide there is nothing to be done and return
success.
Fixes: #27220
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use safe for-each loop in bt_l2cap_encrypt_change since dynamic
channels with pending connection-oriented channel requests will
be canceled and removed from the list if the encryption change
failed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove dependency on CONFIG_BT_ACL_FLOW_CONTROL and use
CONFIG_BT_L2CAP_RX_MTU always to set L2CAP RX MTU.
The ATT MTU is set from two different KConfig options depending
on if CONFIG_BT_ACL_FLOW_CONTROL is enabled, which makes it
a confusing option and hard to provide a conf file that
supports multiple board configurations.
This changes the behavior when CONFIG_BT_ACL_FLOW_CONTROL and
CONFIG_BT_BUF_RX_LEN was used to set the L2CAP RX MTU, and by
extension the ATT MTU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
EATT channels use bt_l2cap_chan_send which does return the number of
bytes sent on success not 0 as bt_l2cap_send.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reject the security request immediately when receiving a security
request that does not support LE Secury Connections pairing.
This would have been rejected during the pairing procedure, but
PTS testing expects the security request to be rejected.
Ref: GAP/SEC/SEM/BV-29-C
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When using CONFIG_BT_CONN_DISABLE_SECURITY bt_gatt_check_perm would
ignore not only the security sensitive permissions but also access
related ones causing crashes since the callback would be NULL.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move implementation of hci_driver.h exposed functions to a common file.
The functions exposed by hci_driver.h header file is implemented in
either hci_core.c, or hci_raw.c. But since these functions would be
identical for both implementations have them in a new file that is
included for both.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This adds CONFIG_BT_CONN_DISABLE_SECURITY which can be used to disable
security checks for incoming requests enabling to test accessing GATT
attributes and L2CAP channels that would otherwise require
encryption/authentication in order to be accessed.
It depends on BT_TESTING to indicate to the users that this is a
testing feature which shall not be used in production.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It should be possible to identify whether advertising set uses legacy
or extended advertising to avoid performing operations that are not
supported on either of them.
For example, scannable advertising can have advertising data set only
if legacy PDUs are used.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Fix a crash in the persistent advertising handling.
This occurs because the callstack of the RX thread overflowed
due to an infinite recursion between bt_conn_unref and
bt_le_adv_resume.
This happens when starting a new advertiser is denied by the
controller, then the conn object reserved will be released again
and the host will attempt to resume advertising in the bt_conn_unerf
at the end of bt_le_adv_resume.
This situation can happen if the host supports more connections
than the controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Follow Bluetooth specification recommendation of setting the output
of the DH_Key field in the LE Generate DHKey Complete event when the
public key is invalid.
If the Remote_P-256_Public_Key parameter of the HCI_LE_Generate_DHKey
command (see Section 7.8.37) was invalid (see [Vol 3] Part H, Section
2.3.5.6.1), then all octets of the DH_Key event parameter should be
set to 0xFF.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added a feature that allows an application to request
automatic discovery of the CCCD handle when subscriping
to a characteristic. In order to preserver RAM, the application
is expected to provide the discovery parameters, and it's up
to the application whether or not it wants to reuse the
discovery parameters or use one for each characteristic.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Change fixes storing subscriptions in settings. CCC write can interrupt
the ccc_delayed_store. Without the change, new CCC was not stored in
non-volatile memory and the work that stored CCC was not resubmitted.
That resulted in lost subscription after reboot.
Fixes: #26862
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Add bond_deleted callback so that the application can keep track
of when bond information is deleted in the stack.
Bond information can be deleted by the application through bt_unpair
or automatically by the stack in some cases, e.g when
CONFIG_BT_KEYS_OVERWRITE_OLDEST is enabled and the oldest bond
is overwritten.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow calling bt_le_adv_start with no connection object available
when not the option BT_LE_ADV_OPT_ONE_TIME has been set. In this
case the advertiser will be restarted once there is a connectable
advertiser object available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When CONFIG_BT_GATT_NOTIFY_MULTIPLE is selected and the remote has
enabled support for using its procedure data can sometimes not fit
into the buffer since the multiple variant has a bigger header, so
instead of failing immediatelly this attempts to send the data using
the legacy PDU instead so those using bt_gatt_get_mtu - 3 can still be
sent.
Fixes#26106
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Turn the GATT notify multiple feature off as default value.
This feature changes the behavior of the bt_gatt_notify API in a way
that might not be backwards-compatible.
This is because the notify multiple header is larger, and therefore
limits the amount of bytes that could otherwise have been sent in a
normal notify PDU for a given ATT MTU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix use of conn_handle in LE Advertising Set Terminated event not
converting from serial Little Endian to native CPU endianness.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use an unspecified reason when disconnecting a connection that did not
have a pending connection in the host.
We don't allocate connection objects in the connection complete anymore
so using memory-capacity-exceeded is misleading.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This patch fixes an issue with the advertiser not resuming connectable
advertiser if the last bt_conn_unref happens from something other
than the disconnected callback.
In this case this last bt_conn_unref was from gatt.c notify_cb called
from application main thread.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix host RX thread being deadlocked. The deadlock occurs because the
RX thread is stuck waiting in conn_tx_alloc with K_FOREVER but if the
connection is disconnected only the RX thread can unblock it in the
handling of the disconnect event.
This commit fixes this deadlock by splitting the processing of the
disconnected event into two parts.
The part needed to unblock the RX is to release resources held by
unack'ed TX packets and mark the connection state as not connected
anymore.
The RX thread waiting for free_tx fifo and the TX thread waiting for
the bt_dev.le.pkts semaphore will both check the connected state after
having acquired them and will abort if disconnected.
The rest of the processing will be handled at normal RX thread
priority like normal.
Move the bt_recv_prio handling to the Bluetooth host when the host
has defined its own RX thread (CONFIG_BT_RECV_IS_RX_THREAD=n).
If the HCI driver has the RX thread (CONFIG_BT_RECV_IS_RX_THREAD=y),
then the responsibility to call bt_recv and bt_recv_prio correctly
falls to the HCI driver.
The helper function bt_hci_evt_is_prio() is replaced with
bt_hci_evt_get_flags() so that the HCI driver can do this correctly.
This decision to replace was made so that existing HCI drivers
maintained out-of-tree will fail at compile time with the new system.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Bluetooth: host: Move bt_recv_prio to host when RX thread is defined
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Save link key to settings_subsys, no need to re-pair after restart.
Overwrite old pairing records with aging counts.
Signed-off-by: ZhongYao Luo <LuoZhongYao@gmail.com>
Fix the advertise object not release when a high-duty cycle directed
advertiser timeout happens. If the extended advertising feature has been
enabled in the host, but not supported by the controller then the
advertising object must be released in the connection complete event
since there will not be a advertising set terminated event.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add options for phy update procedure. User can now set no preference
option for a particular PHY as well as preference for LE Coded PHY
coding scheme.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
These functions don't work with buffers that do have fragments, instead
this replaces their usage with net_buf_{put,get}.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ATT_PENDING_SENT does severely impact the throughput since multiple
packets no longer can be scheduled at same time, so instead of always
setting it regardless of the bearer/channel it is now only used for
EATT since that cannot set its own callbacks.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bt_l2cap_send_cb may fail if there are no context available which means
that the request would not be sent, also due to the use of custom
callback it cannot be queued either so the only option is to return the
error and let the application handle it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Since the TX semaphore is used for all types of PDUs a request may have
to be put on the request list while there is no pending request pending
which means no response will be generated to trigger att_process,
previously this condition was handled by setting the request as
currently pending and append its buffer to tx_queue but this is no
longer efficient since there could be more than one channel active the
code should try all of them before queueing back to request list.
To fix this the request list will now be processed each time a PDU has
been sent.
Fixes#26070
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ATT channel sent callback shall not be overwritting until the
operation completes as it can result in breaking flow control when
CONFIG_BT_ATT_ENFORCE_FLOW is enabled.
Fixes#25964Fixes#26071
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add warning about enabling the options below so that users are
aware that this is a security risk.
- CONFIG_BT_DEBUG_SMP
- CONFIG_BT_DEBUG_KEYS
- CONFIG_BT_OOB_DATA_FIXED
- CONFIG_BT_USE_DEBUG_KEYS
- CONFIG_BT_STORE_DEBUG_KEYS
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The bt_l2cap_le_conn_rsp struct in l2cap_internal.h has not been
declared __packed. This can cause alignment problems on some
platforms if the struct is placed on an unaligned address.
A __packed declaration solves this issue by forcing the compiler to
use store instructions that do not required alignment.
Signed-off-by: Jim Luther <jilu@oticon.com>
Some Kconfig defined devices may be defined using dt_chosen_label
function. Since there is no way to ensure a device enabled in dts
is also defined in Kconfig, it may happen that instance is not
actually defined.
In this case device_get_binding might return 0, leading to undefined
behavior in the function that calls it.
When not already done, systematically check return of function
device_get_binding on devices defined through dt_chosen_label macro.
Trigger ASSERT when required and return error when possible.
Fixes#20068
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commits fixes the loading of bt/cf settings into memory. Only data
was loaded and not the address.
Signed-off-by: François Delawarde <fnde@demant.com>
build breakage if SMP is disabled
In function `bt_unpair':
bluetooth/host/hci_core.c:2640: undefined reference to `bt_foreach_bond'
Signed-off-by: chao an <anchao@xiaomi.com>
If LE Read PHY fails the code was still trying to parse the buffer as a
valid response.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix extended advertiser not using correct set random address command
to set private (NRPA) address when privacy feature has been disabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix Service Changed configuration stored in flash not deleted in flash
when calling bt_gatt_clear from bt_unpair.
When clearing the check for "is bonded" should not be made. If the
bond information is already removed this check will fail.
When clearing the check for "modified" should not be made, clearing
is in itself a modification, and should always be made.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix CCC cfg not cleared when overwriting oldest bond. Calling
bt_unpair with a pointer to the key will result in the key addr being
memset to zero and bt_gatt_clear is called with an zero-set address.
This happens because unpair (hci_core.c) calls bt_keys_clear before
calling bt_gatt_clear.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
get_phy is referenced by BT_EXT_ADV only when BT_OBSERVER is also
selected. Avoid defined-but-not-used warnings in that situation.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
When using extended advertising the connection can be established on
different PHY. In order to have an updated value of the current PHY
we need to read the PHY of the connection in the connection complete
event.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating phy change procedure and it's
parameters.
The reasons for allowing the application control over the PHY:
- Allow changing to Coded PHY.
- Application may change PHY to react to changes in environment
to balance throughput and range.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating data length procedure and it's
parameters.
The reasons for allowing the application control over the data length:
- Bandwidth control adjusted based on number of active connections.
- Changing data length before switching to coded phy.
- Applying workarounds for interoperability problems.
- Controlling order of ATT MTU and data length procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add Kconfig option so that the application can disable automatic
initiation of the data length procedure. This is symmetric with the
PHY auto initiation kconfig option.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor setting the maximum data length parameters supported on in
auto data length procedure. This makes setting the data length of the
connection a re-usable function.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The numbers should have been the sum of HCI commands count and ACL TX
buffers but instead the buffer size was used which makes the pool holds
substatially more buffer than necessary.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implement the BT_LE_ADV_OPT_USE_NAME when using bt_le_ext_adv_* APIs
to start the advertiser.
When starting an extended connectable advertiser the name must be
included in the advertising data, since scan response data is
not allowed in this configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove setting state flags in bt_le_adv_start_ext since they are set
by le_ext_adv_param_set, except for BT_ADV_PERSIST flag.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Only persist advertising when the bt_le_adv_start API is used to start
the advertiser. For multiple advertising set a connectable advertiser
can only be started if there is a connection object available for the
advertiser. Leave the decision on which advertising set should be
advertising up to the application instead of suspending advertising
when no connection object is available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the BT_LE_CONN_OPT_2M option and update documentation.
This was a misunderstand about the init PHY HCI parameter.
The init PHY in the extended connection create command does not
determine which PHYs are accepted as the initial PHY of the
connection. This is instead determined by the secondary PHY of the
extended advertiser.
The init PHY parameter only specifies which conn parameters are
provided, and since we only provide one conn parameter this option
has no effect.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The last parameter to hci_cmd_done() is expected to be a valid net_buf
since the function immediately tries to dereference it. Fix this by
passing the appropriate buffer reference to the function.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds a new flag to track if the L2CAP channel is pending waiting
for encryption to be changed to resume connecting.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for ATT_MULTIPLE_HANDLE_VALUE_NTF,
ATT_READ_MULTIPLE_VARIABLE_REQ and ATT_READ_MULTIPLE_VARIABLE_RSP.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for EATT bearer which was introduced in 5.2, they work
as extra channels to have GATT traffic, at the moment it is completely
transparent to application when they are in use since the allocation
happens automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the definitions for Enhanced ATT along with new PDUs and UUIDs
introduced in 5.2.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a callback to indicate when the stack has released all
references to a given channel so the owner free up any resources
associated with that.
This is requires since EATT channels cannot rely on the destroy callback
as it does not use a fixed channel like ATT.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This leaves only channels on the dynamic range to be offloaded to the
system queue so ATT and EATT handling are handling in the same context.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the initial implementation of ECRED mode which can connect up
to 5 channels simultaneously and is required by EATT.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces new Enhanced Credit Based Flow Control PDUs and related
definitions which were introduced in 5.2.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert bluetooth host to using k_timeout_struct for the timeout values.
This is mostly replacing s32_t with k_timeout_t.
In l2cap the handling of no timeout in send channel request was removed
since the timeout is both documented as minimum of 1 second and never
given any no timeout value.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove logging of individual threads spread out throughout the
bluetooth subsystem. The stacks can be analysed by enabling the
following options.
CONFIG_THREAD_ANALYZER=y
CONFIG_THREAD_ANALYZER_AUTO=y
CONFIG_THREAD_ANALYZER_RUN_UNLOCKED=y
Optional:
CONFIG_THREAD_NAME=y
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Include the RPA addresses in the enhanced connection complete debug
log. This makes it easier to debug privacy failures.
Use a new debug statement so that the debug print will work correctly
when log_strdup does not copy the string.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix compilation issue for extended advertising beacon. Adv pool was
mistakenly put under BT_OBSERVER define.
Both observer and broadcaster use the bt_lookup_id_addr. SMP cannot
be enabled without connections, so for broadcaster and observer there
will not be a lookup.
Fix compilation warning for extended scanner-only build.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
According to the BT Core spec. The local RPA field in the enhanced
connection complete event should be set if the own-address type was
set to 0x02/0x03 and the controller generated an RPA using a non-zero
IRK, otherwise the controller should return all zeroes.
In the case where we generate the RPA in the host instead we need to
handle set the on-air RPA address based on the random address set by
the host.
If this is not handled then pairing will fail because the on-air
addresses are used as input to the pairing procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove handling of extended advertising from connection complete
event. If extended advertising has been enabled and is supported by
the controller then enhanced connection complete must be supported.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
User of bt_buf_get_rx may attempt to push their own headers, e.g. ACL
headers, so move the H4 header logic to bt_recv after logging into the
monitor since otherwise the buffer would contain H4 headers which is
not expected by the monitor.
Fixes#24646
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add support for multiple advertising set. Move the advertising state
flags to be per advertising set and loop over advertising sets instead
of looking up legacy advertiser set or handle 0.
Since it is not certain that the advertising set terminated event can
arrive directly after the connection complete event there is currently
a limitation that there can only be one local identity used by
connectable advertisers at a time. This guarantees that we know
the local identity being used in the connection complete event.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Only attempt to restart the background scanner in connection complete
event when the new connection is a master role connection or the
initiator was successfully canceled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Enable enhanced connection complete when extended advertising has been
enabled. This event is mandatory if extended advertising is supported.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This makes hci_raw to manage RX and TX buffers so its logic don't have
to be replicated on each an every driver/application, it also makes it
simpler to deal with extra headers for H:4 mode since that then can be
done at earlier at buffer allocation.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for registering a command extention table which is
used to match incoming commands and then pass the buffer to its
function handler.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds 2 config options which enables hci_raw to work in
H:4 mode and enable it by default automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When legacy advertising enable command is issues,
the BT_ADV_ADVERTISING has to be set, because this
flag is checked in many scenarios to see if the
advertising is ongoing or not.
Signed-off-by: Ahmed Shokry <ahmed.shokry@synopsys.com>
When disconnecting att_reset is called and all requests are notified
but instead of passing req->user_data like it should it pass the req
itself which nowdays comes from a k_mem_slab, rather than being a
contiguous memory that would contain the request and its user data,
which would likely cause invalid access.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch introduces two major changes to the directed advertising
feature of the bluetooth host.
Deprecating the bt_conn_create_slave_le, and removing
bt_conn_le_create_slave which has never been released. This behaviour
has now been moved by to providing the peer direct address into the
advertising parameters.
Introducing directed advertising support for nonconnectable
directed extended advertising, both scannable and non-scannable.
A bug was also fixed in the the directed-adv command in the shell
when the argument "low" was given. The advertiseng parameter pointer
declared with BT_LE_ADV_CONN_DIR_LOW_DUTY was declared in a scope that
was no longer valid when it was used to start the advertiser.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Check the return value of LE Set Extended Advertising Parameters
command when starting an advertiser from bt_le_adv_start with
CONFIG_BT_EXT_ADV enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The LE Set Extended Advertising Set Random Address command may be
issued at any time after an advertising set identified by
the Advertising Handle parameter has been created using the
LE Set Extended Advertising Parameters command.
This commit fixes the advertising set issueing the set random address
command before the advertising set is created in the controller.
Since the le_adv_set_random_addr function has is used to get the the
own address parameter for the it could not simply be moved, and
moving the own address parameter handling out of this function
would create a potentioal maintaince problem.
Also this function is used for both with and without advertising
extension feature so changing it is not trivial without breaking all
the previous random address handling already put in place.
The simplest solution was therefore to postpone the command until the
parameters has been set using 2 flags.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use bluetooth assert on HCI command send error since this assertion is
always enabled and we should not continue after this has failed.
Log command status failure with information in order to make it more
visible as the HCI status code is more interesting than the -EIO error
code returned by the function.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the pending slave set connection latency and timeout values not used
in the connection update procedure when
CONFIG_BT_GAP_PERIPHERAL_PREF_PARAMS has not been enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Extends the bt_conn_le_create_param struct to provide the option
to set a custom timeout for the initiation of the connection.
The logic for the default values of window_coded and interval_coded
were moved to conn.c in order to resolve all defaults for the
create_param struct at a single location.
Timeout is not added as a parameter to the BT_CONN_LE_CREATE_PARAM
macro due to the expectation that CONFIG_BT_CREATE_CONN_TIMEOUT
will be the typical value that users will expect.
Fixes#23468
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fix an an issue where established bonding information in the peripheral
are deleted when the central does not have the bond information.
This could be because the central has removed the bond information, or
this is in fact not the central but someone spoofing it's identity, or
an accidental RPA match.
This is a regression from: a3e89e84a8
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add additional build configurations to the shell to catch build errors
when enabling extended advertising.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix compilation issue when extended advertising is enabled but privacy
is disabled. In this case the rpa_update work is compiled out.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Most places used an int so that should have handled most cases but
keys_set was using an unsigned int, which meant that checking len > 0
is an expression that is always false, and the error handling is not
working.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix high-duty cycle directed advertising when extended advertising
feature has been enabled. The duration parameter when starting extended
high duty cycle directed advertising has to be set to a non-zero value
less than or equal to 1.28 seconds.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Avoid removing identity keys from the controller during the pairing
procedure. During the pairing procedure the keys will be cleared before
they are updated. This causes an unnecessary warning from HCI core where
it tries to remove an IRK key-set from the controller that has has not
been added yet.
While this is not an issue, the warning from HCI core is misleading and
might lead to unnecessary questions and investigations.
Warning appeared after: 6c6bd8c49e
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move the pending ID keys add and delete flag out of keys storage area.
These flags are runtime flags and should not be stored in persistent
storage.
Due to struct alignment storage start has to be aligned so that
variables added before storage start does not affect the storage bytes
by introducing padding in the storage area
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Skip feature testing of controller features when legacy advertising
commands are not supported. For combined builds or builds where the
capability of the controller is known it is not required to have runtime
check of controller extended advertising support.
This gives the following size reduction for hci_core.c:
Without legacy support
hci_core.c 19980 7.75%
total 257679
With legacy support
hci_core.c 21816 8.41%
total 259519
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Handle updating the identity keys in the controller while a scanner
limited by timeout or advertiser limited by number of events or timeout
is active in the controller. For this case we mark they keys as pending
and handle the update of the resolving list ones the roles are stopped.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add RPA handling for scan limited by timeout. The scan limited by
timeout has no information about elapsed time when stopped. So pausing
the scan at RPA timeout has no new scan timeout value to set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add error code to API for starting directed advertiser. Also rename the
API in order to follow the established naming pattern.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add support for creating and advertising with an advertising set.
This has support to advertise with extended data and with long range
feature on Coded PHY.
Limited to only supported one advertising set.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add support to use the extended conn create options to establish
connections on LE Coded PHY or 2M. This uses the connection options
set by bt_conn_set_scan_params.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add API to set the scan parameters used in the LE Create Connection
HCI command used by bt_conn_create_le and bt_conn_create_aute_le.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add support for the new scan options and use the LE Extended Scan
HCI commands if they are available in the controller.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor scan and initiator random address handling to a helper function
so that it can be re-used.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add reference count old to new value transition in the debug print, this
makes it easier to interpret the printed line when debuggin reference
count bugs.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Extract setting advertising filter policy parameter from the adv params
options field to a helper function.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update buffer sizes needed when advertising extensions is enabled. Since
BT_RX_BUF_LEN is used for the HCI command as well we need to fit the
full 255 bytes of the Set Extended Advertising Data or Scan Response
Data plus the 3 byte header of an HCI command.
For the discardable buffer size we need to fit the LE Extended
Advertising Report event, which can be a maximum of 255 bytes plus the
2 byte header of an HCI event.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate BT_LE_ADV defines in hci.h that are expected to be used by the
application in the scan received callback to identify the advertising
PDU type. These defines are mixing HCI input parameters and advertising
PDU types. Internally it is acceptable to mix these, but at the API we
should to mix in them.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename filter_dup parameters used for scanning filter options to the
more generic name options, and make scan filter options follow same
naming patters as advertising and initiator scan options.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate bt_create_conn_le and rename it to in order to add return
code, new arguments and to follow the established naming convention.
Add API for the application to control the scan parameters of the
initiator role. This allows the application more scheduling control
of the initiator in multi-role scenarios. Also provides options to
configure the initiator for LE Coded PHY for long range support.
We deprecate the old way of creating connection to make the name more
consistent with the rest of the API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix directed advertising from privacy disabled peer. In this case we
need to have the local IRK in the controllers resolving list in order to
have the controller resolve the initiator address of the directed
advertising pdu (ADV_DIR_IND).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix directed advertiser using the wrong local IRK when doing directed
advertising when the identity of the advertiser is not the default
identity.
This is only an issue for the directed advertiser because it is only
for the directed advertiser that we use the controllers local IRK
to generate the Advertisers RPA.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add header definition for bt_read_static_addr function. Declaring it
without a header definition will not give any compilation error when
function definition changes.
Refactor nRF SoC specific code into nRF specific source files and
provide weak definitions when these are not implemented. This will make
it easier to add handlers per vendor.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When using BT_LE_ADV_NCONN_NAME then the advertising name will not be
included in the advertising data. This is because the host always puts
the device name in the scan response. But since the scan data was
otherwise empty the advertising type was set to ADV_NONCONN_IND.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fixes#23485
When we create a GATT table dynamically, we also create a hash
identifying this table. This hash can be stored in persistent memory and
we can thus determine after recreating the GATT table whether the
services have changed or not from before the reboot.
When these hashes are identical, it implies that the table has not
changed, wherefore a service changed indication should not be sent to
any bonded clients. The method for achieving this was to remove the
gatt_sc.work entry from the work queue. This work queue entry was to
send an indication to the clients when the table had been allocated.
If the final entry then caused the hashes to match, the indication
would be cancelled.
On unit testing this behaviour in simulation and in practice, we found
that the indication was sent nonetheless, and the issue was located to
be tied to the SERVICE_RANGE_CHANGED flag which is set when the services
are changed and is cleared when the indications are being sent out.
It was the job of the work queue entry to clear this flag, and as the
entry was never serviced, the flag was never cleared, and when
sc_commit() is called at the end of the process, it believes that there
is a new service change pending and therefore starts the job over, thus
creating a redundant indication to the clients.
This commit fixes the issue by clearing the flag when the work entry
is removed due to a hash match. This has been unittested in a live
environment, in a simulation environment, and sanitycheck has been run
on it.
Signed-off-by: Dan Erichsen <daee@demant.com>
The commit e85dd8af5d changed the way the BT_ECC Kconfig option
is enabled, however it got the dependency wrong. The dependency should
only look at BT_SMP_OOB_LEGACY_PAIR_ONLY if BT_SMP was also enable.
This broke e.g. the build of the mesh_demo app for the BBC
micro:bit since the memory consumption jumped up by roughly 2k.
This patch fixes the issue, and in the same go makes the Mesh handling
consistent by also using a conditional default rather than select.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Allow to get local OOB data while advertiser, scanner or whitelist
initiator is active. If direct initiator is active or the advertiser
is using the random address as a random static identity address then
the function will return error.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When OOB callbacks are present it is possible to achieve authenticated
pairing without having the remote OOB data present. Using OOB with
LE Secure Connection only one side of the pairing procedure is required
to have the OOB data present. If we have given the remote our OOB data
then pairing can proceed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY option that completely disables
all legacy and SC pairing modes(except for Out of Band) and frees the
memory previously used by these.
Added CONFIG_BT_SMP_DISABLE_LEGACY_JW_PASSKEY option that force rejects
pair requests that lead to legacy Just Works or Passkey pairing.
Signed-off-by: Iván Morales <ivan98ams@gmail.com>
