Implement HCI commands to read information about supported codecs and
controller delay.
* Read Local Supported Codecs command (v1 and v2)
* Read Local Supported Codec Capabilities command
* Read Local Supported Controller Delay command
The following functions are implemented as "weak" symbols and should
be overridden to fill in vendor-specific information into the above
commands.
* hci_vendor_read_std_codecs
* hci_vendor_read_vs_codecs
* hci_vendor_read_codec_capabilities
* hci_vendor_read_ctlr_delay
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Move implementation of hci_driver.h exposed functions to a common file.
The functions exposed by hci_driver.h header file is implemented in
either hci_core.c, or hci_raw.c. But since these functions would be
identical for both implementations have them in a new file that is
included for both.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix host RX thread being deadlocked. The deadlock occurs because the
RX thread is stuck waiting in conn_tx_alloc with K_FOREVER but if the
connection is disconnected only the RX thread can unblock it in the
handling of the disconnect event.
This commit fixes this deadlock by splitting the processing of the
disconnected event into two parts.
The part needed to unblock the RX is to release resources held by
unack'ed TX packets and mark the connection state as not connected
anymore.
The RX thread waiting for free_tx fifo and the TX thread waiting for
the bt_dev.le.pkts semaphore will both check the connected state after
having acquired them and will abort if disconnected.
The rest of the processing will be handled at normal RX thread
priority like normal.
Move the bt_recv_prio handling to the Bluetooth host when the host
has defined its own RX thread (CONFIG_BT_RECV_IS_RX_THREAD=n).
If the HCI driver has the RX thread (CONFIG_BT_RECV_IS_RX_THREAD=y),
then the responsibility to call bt_recv and bt_recv_prio correctly
falls to the HCI driver.
The helper function bt_hci_evt_is_prio() is replaced with
bt_hci_evt_get_flags() so that the HCI driver can do this correctly.
This decision to replace was made so that existing HCI drivers
maintained out-of-tree will fail at compile time with the new system.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Bluetooth: host: Move bt_recv_prio to host when RX thread is defined
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add header definition for bt_read_static_addr function. Declaring it
without a header definition will not give any compilation error when
function definition changes.
Refactor nRF SoC specific code into nRF specific source files and
provide weak definitions when these are not implemented. This will make
it easier to add handlers per vendor.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit reverts the change that moved the remote version event from
a priority event to a normal event. This is done because the strategy
for using this event has been changed and will be used with a callback
instead of a semaphore that could be locked from the RX thread.
This commit retains the infrastructure that was added in the controller
so that moving events to priority processing is still possible.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The remote version information event needs to be processed by the
prio_recv_thread() thread in order to unblock the Host RX thread
(effectively hci_driver's recv_thread()) when it blocks waiting for a
response to a remote version information.
Add the same time gate the inclusion of the feature behind a new Kconfig
option: CONFIG_BT_REMOTE_INFO.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to distinguish between connection-related events
that are generated by the controller and others genrated by LL control
procedures, introduce a new class for LLCP.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Cache the result of calling hci_get_class() to avoid repeatedly invoking
it on the same data. In order to cache it we take advantage of the fact
that both radio_pdu_node_rx_hdr and node_rx_hdr are not packed
structures and they currently have a spare padding byte (between type
and handle).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Hide the details of obtaining a pointer to the PDU data from a node_rx
structure to simplify the code.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Renamed function vendor_cmd_handle to vendor_cmd_handle_common for
shared vendor commands. This allows vendor to implement
vendor_cmd_handle, containing both common and specific handling.
Signed-off-by: Morten Priess <mtpr@oticon.com>
* Rename the stack local 'done' to 'evdone' so as to disambiguate from
MFIFO_DEQUEUE_PEEK(done) which is actually 'mfifo_done'.
* add comment on ull_slave_done
* add comments to addr_us_get
* add comments to HCI_CLASS
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Preparation to introduce the Upper Link Layer (ULL) and
Lower Link Layer (LLL) split architecture.
- Move SoC dependent HAL to vendor specific folder.
- Preparation to split data structures into ULL and LLL
types.
- Added more role and state conditional compilations.
- Added some work-in-progress implementation of advertising
extensions, will be used as inspiration in the new split
architecture work.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To allow the BLE stack to be used both in the real nRF platforms
and simulated ones, change the used macros in the code to the
COMPATIBLE ones.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Calling bt_recv in the Bluetooth host Tx thread by the
controller implementation caused deadlock in combined host
controller builds when HCI LE Create Connection Cancel
generated the HCI LE Connection Complete or HCI LE Enhanced
Connection Complete events.
Controller's HCI implementation has been updated to place
the generated event into Rx FIFO to avoid the deadlock.
Relates to commit a59f544fb4 ("bluetooth: controller:
Handle non-priority events correctly")
Relates to #10314.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove include guards in internal files; it is an agreed
convention to not have include guards in internal header
files in Bluetooth subsystem.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Upcoming Nordic ICs that share many of the peripherals and architecture
with the currently supported nRF5x ones are no longer part of the nRF5
family. In order to accomodate that, rename the SoC family from nrf5 to
nrf, so that it can contain all of the members of the wider Nordic
family.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Whenever the HCI ACL flow control is violated by the Host, a Data Buffer
Overflow event is now issued by the Controller (if enabled) to notify
the Host of the buffer overrun.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use the macros generated during the build and located in version.h to
fill in the version information in the Read Version Information VS
command. Additionally reply with the correct hardware identifiers when
running on Nordic hardware.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since Controller to Host flow control is a feature that affects both
sides equally, move it to the top-level Kconfig file and consolidate its
use in both Controller and Host.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The Bluetooth Specification allows for optional Controller to Host flow
control based on the same credit-based mechanism as the Host to
Controller one. This is particularly useful in 2-chip solutions where
the Host and the Controller are connected via a physical link (UART, SPI
or similar) where the Host is sometimes required to ask the Controller
to throttle its data traffic while still making sure that relevant
events get through the line.
This implementation is based on a simple queue of pending events and
data that is populated whenever the Controller detects that the Host is
out of buffers and then emptied whenever the Host notifies the
Controller that is ready to receive data again. Events relevant to the
connections are also queued to preserve the order of arrival.
At this point the Controller ignores the connection handle sent by the
Host and treats all connections equally, and it also queues events even
for connections that have no data pending in the queue. Both this items
can be improved if necessity arises.
Note that Number of Completed Packets will still flow freely from the
Controller to the Host regardless of the pending ACL data packets, which
might lead to inconsistencies in the sequential order of certain
operations that include bi-directional data transfer.
Jira: ZEP-1735
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I8f57a17f78e674aca5400f005db8975c9f9e150e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
With an upcoming patch the HCI command buffers will be reused for the
Command Complete/Status HCI events. The controller HCI code needs some
refactoring to postpone the event buffer allocation so that the
parsing state of the HCI command buffer isn't touched.
Change-Id: I1f614fb9f02ed1886ca84198fbc8c64abc29e44f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename hci_le_rand to bt_rand and make its parameter types compatible.
This also includes updating rand_get() to use size_t instead of
uint32_t & uint8_t.
Change-Id: I4d434dfbbaf339b1bc7b451d358d07a291dd0375
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Advertising reports are the only HCI events which we can drop if we
are low on buffers. Allocate them therefore with K_NO_WAIT rather than
K_FOREVER.
Change-Id: I0b7c92647f9be54b8746da837037725f8161a452
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement the 2 HCI commands that provide ECC public key
and shared secret generation:
- LE Read Local P-256 Public Key
- LE Generate DHKey
Jira: ZEP-1246
Change-Id: I79388bfdb9f2e28b9377b4bb6ee2caca25f33f3e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Move controller code from drivers/controller to
subsys/bluetooth/controller.
Change-Id: I73f675188485aa3267507bad7647796e593a3da0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
