Since the removal of Quark-based boards, there are no user of
Minute-IA. Also, the generic x86 SoC is not exactly Minute-IA
so change it to use a fairly safe CPU_ATOM.
Fixes#14442
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We assume that all x86 CPUs do have clflush instructions.
And the cache line size is now provided through DTS.
So detecting clflush instruction as well as the cache line size is no
longer required at runtime and thus removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A more comprehensive solution would use E820 enumeration, but we
are unlikely to ever care that much, as we intend to use demand
paging on microcontrollers and not PC-like hardware. This is
really to just prevent QEMU from crashing.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A more comprehensive solution would use E820 enumeration, but we
are unlikely to ever care that much, as we intend to use demand
paging on microcontrollers and not PC-like hardware. This is
really to just prevent QEMU from crashing.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduce a Kconfig variable that the SoC can set to indicate the
number of instances in Device Tree. This also fixes the accuracy of
the Elkhart Lake instance count where the code was previously assuming
up to 12 instances even though DT lists 15 nodes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The new APIs are not only dealing with cache flushing. Rename the
Kconfig symbol to CACHE_MANAGEMENT to better reflect this change.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add support for fixed MMIO (non-PCIe) UART devices for the early
serial. All we need to do is to detect if the device is on PCIe and
set the right register address define based on that.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add definitions for UART1/2 when they're accessible through fixed MMIO
addresses (instead of PCIe), and mark all UARTs not normally available
with the UEFI BIOS as "disabled".
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For a while now, we've had two APIC drivers. The older was preserved
initially as the new (much smaller, "new style") code didn't have
support for Quark interrupt handling. But that's long dead now. Just
remove it.
Note that this migrates the one board using this driver (acrn) to
CONFIG_APIC_TIMER instead.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We need the same logic for each SOC, instead of copypasting
things just put this in a common file. This approach still
leaves the door open for custom memory layouts if desired.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This board doesn't have any known users and is not really maintained
anymore, so just remove it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Various cleanups to the x86 early serial driver, mostly with the goal
of simplifying its deployment during board bringup (which is really
the only reason it exists in the first place):
+ Configure it =y by default. While there are surely constrained
environments that will want to disable it, this is a TINY driver,
and it serves a very important role for niche tasks. It should be
built always to make sure it works everywhere.
+ Decouple from devicetree as much as possible. This code HAS to work
during board bringup, often with configurations cribbed from other
machines, before proper configuration gets written. Experimentally,
devicetree errors tend to be easy to make, and without a working
console impossible to diagnose. Specify the device via integer
constants in soc.h (in the case of IOPORT access, we already had
such a symbol) so that the path from what the developer intends to
what the code executes is as short and obvious as possible.
Unfortunately I'm not allowed to remove devicetree entirely here,
but at least a developer adding a new platform will be able to
override it in an obvious way instead of banging blindly on the
other side of a DTS compiler.
+ Don't try to probe the PCI device by ID to "verify". While this
sounds like a good idea, in practice it's just an extra thing to get
wrong. If we bail on our early console because someone (yes, that's
me) got the bus/device/function right but typoed the VID/DID
numbers, we're doing no one any favors.
+ Remove the word-sized-I/O feature. This is a x86 driver for a PCI
device. No known PC hardware requires that UART register access be
done in dword units (in fact doing so would be a violation of the
PCI specifciation as I understand it). It looks to have been cut
and pasted from the ns16550 driver, remove.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Previously, DTS specification of physical RAM bounds did not
correspond to the actual bounds of system RAM as the first
megabyte was being skipped.
There were reasons for this - the first 1MB on PC-like systems
is a no-man's-land of reserved memory regions, but we need DTS
to accurately capture physical memory bounds.
Instead, we introduce a config option which can apply an offset
to the beginning of physical memory, and apply this to the "RAM"
region defined in the linker scripts.
This also fixes a problem where an extra megabyte was being
added to the size of system RAM.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
UARTs and I2C controllers are accessed through MMIO and
these regions need to be added to MMU for proper access.
This also enable MMU for Apollo Lake by default since
serial console is now usable.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This file consists only of an array of per-CPU IOAPIC ID's that
overrides the weak symbol defined by the architecture.
The IOAPIC IDs are only used when targetting a startup IPI for the
auxiliary right now, but the IDs are the IDs and represent hardware
truth. They should be correct even if unused.
Using the wrong ones also breaks the tests/kernel/mp test, which calls
arch_start_cpu() when not in SMP mode as a deliberate unit test.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The APIC timer is not supported e.g. with SMP (which will be enabled
by default soon as well) so the sensible choice is to default to HPET.
Also, the default makes more sense to be on the SoC side, so move it
there from the board defaults.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The nodelabel references for the GPIO region MMU setup were incorrect.
The nodelabel names didn't match what is in the dts. Fix this otherwise
we get a compile error when enabling the functionality.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Make it possible for an application to set CONFIG_I2C=n if it wants.
The unconditional select was making this impossible due to resulting
unmet dependencies.
This is also in line with what some other SoC definitions do with I2C.
Fixes#25204
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rework x86 linker scripts to use DT_REG_ADDR/DT_REG_SIZE on
DT_CHOSEN(zephyr_sram) and DT_CHOSEN(zephyr_flash). As part of this
we remove the dts_fixup.h. Using DT_REG_SIZE means we don't have to
adjust the sizes by 1024.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When we converted the GPIO driver to the new GPIO API we didn't update
the MMU mapping defines. Use the macros from devicetree.h and
nodelabel's to get the register base address and sizes for the GPIO
blocks.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rework the atom/linker.ld to match how ia32/linker.ld works with regards
to how PHYS_LOAD_ADDR & PHYS_RAM_ADDR are set based on CONFIG_XIP and
from which DT_PHYS_{RAM,LOAD}_ADDR defines. We update the minnowboard
dts and atom.dtsi files to keep in sync with this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use new DT_INST macros throughout. We remove the
aliases and use nodelabel instead in the soc_gpio.h to determine the
label for the specific gpio controller.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Change to code to use the automatically generated DT_INST_*
defines and remove the now unneeded configs and fixups.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
The sole purpose of init options has been to enable hardware flow
control on NS16750 when asked. Use the proper DTS tags for this.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Same deal as in commit eddd98f ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for all symbols defined within defconfig
files. See that commit for an explanation.
Maybe 'if's were used originally to mirror the 'if's in the main Kconfig
files, and then it got copied around by people assuming 'if' must work
differently from 'depends on'. It doesn't match in every spot at least.
Better to keep it simple and just consistently use 'depends on' when
it's a single symbol/choice I think. Helps reinforce that 'if' isn't
magic too.
Verified by printing all Kconfig menu nodes (symbols, choices, menus,
etc.) before and after the change and diffing (should show no
difference).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
All board defconfig files currently set the architecture in addition to
the board and the SoC, by setting e.g. CONFIG_ARM=y. This spams up
defconfig files.
CONFIG_<arch> symbols currently being set in configuration files also
means that they are configurable (can be changed in menuconfig and in
configuration files), even though changing the architecture won't work,
since other things get set from -DBOARD=<board>. Many boards also allow
changing the architecture symbols independently from the SoC symbols,
which doesn't make sense.
Get rid of all assignments to CONFIG_<arch> symbols and clean up the
relationships between symbols and the configuration interface, like
this:
1. Remove the choice with the CONFIG_<arch> symbols in arch/Kconfig and
turn the CONFIG_<arch> symbols into invisible
(promptless/nonconfigurable) symbols instead.
Getting rid of the choice allows the symbols to be 'select'ed (choice
symbols don't support 'select').
2. Select the right CONFIG_<arch> symbol from the SOC_SERIES_* symbols.
This makes sense since you know the architecture if you know the SoC.
Put the select on the SOC_* symbol instead for boards that don't have
a SOC_SERIES_*.
3. Remove all assignments to CONFIG_<arch> symbols. The assignments
would generate errors now, since the symbols are promptless.
The change was done by grepping for assignments to CONFIG_<arch>
symbols, finding the SOC_SERIES_* (or SOC_*) symbol being set in the
same defconfig file, and putting a 'select' on it instead.
See
https://github.com/ulfalizer/zephyr/commits/hide-arch-syms-unsquashed
for a split-up version of this commit, which will make it easier to see
how stuff was done. This needs to go in as one commit though.
This change is safer than it might seem re. outstanding PRs, because any
assignment to CONFIG_<arch> symbols generates an error now, making
outdated stuff easy to catch.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This breaks down the GPIO controller definition in DTS into
multiple entries. This allows these controllers to be
referenced by other DTS, and test board overlay files.
And also we can remove the entries in the dts fixup file.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In order to avoid a warning from Sphinx complaining that the
supported_features.rst file is not included in any ToC, rename it to
.txt so that Sphinx understands that this is only a snippet to be
included in other files.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This will be used for both 32-bit and 64-bit mode.
This header gets pulled in by x86's arch/cpu.h, so put
it in include/arch/x86/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add duplicate per-CPU data structures (x86_cpuboot, tss, stacks, etc.)
for up to 4 total CPUs, add code in locore and z_arch_start_cpu().
The test board, qemu_x86_long, now defaults to 2 CPUs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
