If the client sends OK or FAIL, then it means that we are run
under a test system and we should stop running and exit so that
the test runner (scripts/net/run-sample-tests.sh) can report
success or failure.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user sets CONFIG_NET_SAMPLE_SERVE_LARGE_FILE then the sample
will return 100KB file. By default 2KB file is returned.
This is used by the Docker based testing.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This feature is used by scripts/net/run-sample-tests.sh script
which connects the Zephyr gPTP sample to Linux gPTP daemon running
on a Docker container.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make it easier to add TF-M in an app by selecting and implying the
necessary configs so the app doesn't have to specify the configs itself.
Remove unneeded configs from the prj.conf files in the tfm samples.
Also, fix case in key file name.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The Nucleo-L031K6 development board has been tested with the MCP9808
sample code and works as expected.
Signed-off-by: Steven Daglish <s.c.daglish@gmail.com>
Add support for nRF5340 DK in the TF-M integration
samples (nrf5340dk_nrf5340_cpuappns build target).
Add the required DTS overlays needed for the samples
to build and run successfully.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add support for CONFIG_NET_SAMPLE_SEND_ITERATIONS option so that
this sample can be run multiple times against HTTP(s) server
that is running inside a Docker container.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Basic sample program that uses the one led and button from the Pinetime.
Led will turn on everytime the button is pushed.
Signed-off-by: Rafa Couto <caligari@treboada.net>
Improve the way the nrf_qspi_nor driver configures the SCK frequency,
to properly support QSPI also on nRF53 Series SoCs that use a different
base clock frequency (96 MHz).
Add also a relevant configuration in the spi_flash sample so that it
can run on the nRF5340 DK.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert handful of users of DEVICE_INIT to DEVICE_DEFINE or
SYS_DEVICE_DEFINE to allow deprecation of DEVICE_INIT.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update the `peripheral` and `peripheral_ht` samples to use the
indication `destroy` callback to determine when the indication has
completed, instead of using the value callback of the first active
connection.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds a `destroy` callback to the `struct bt_gatt_indicate_params` which
is used to signify to the application that the indication operation has
completed and the struct instance can be freed/destroyed.
This is required as the number of indication value callbacks that will
be triggered is not known by the caller when the `conn` parameter is
`NULL`.
Tracking when this callback should be run is mananged by a private
reference counter inside the struct.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Update the signature of the `bt_gatt_indicate_func_t` callback type by
replacing the attr pointer with a pointer to the
`bt_gatt_indicate_params` struct that was used to start the indication.
This allows the callback to free the `bt_gatt_indicate_params` instance
if it was allocated from storage, while still allowing the
`bt_gatt_attr` value to be accessed through `params->attr`.
Allocating the `bt_gatt_indicate_params` instance from storage is
desirable as multiple indications can be queued, however each instance
must be valid until the callback is run.
Implements API update from #29357
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This change enables support for DNS service discovery
(RFC 6763) in the mdns_responder service and sample app.
Fixes#29429
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
To make it runnable in the sanitycheck necessary to add
capture output, because that sample runs infinite period of time
and can not finished by itself. To avoid timeout error
in the sanitycheck I added capture output for a several times.
Also added one more tag to describe that it is a power
management sample.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
The goal of this sample application is to measure the performance loss
when a user thread has to go through a system call compared to a
supervisor thread that calls the function directly.
Signed-off-by: Nicolas Royer <nroyer@baylibre.com>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This change adds IEEE 802.15.4g (Sub GHz) support for the
cc1352r.
The 2.4 GHz radio and the Sub GHz radio are capable of
operating simultaneously.
Fixes#26315
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add a simple backoff mechanism between consecutive registration attempts
in case of registration failures. Finally, notify the application in
case the registration failed several times.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
re-enabling this test was premature, it still crashes very often
due to two known issues affecting x86 64-bit. Filter out for
every 64-bit x86 platform until those bugs are solved, which
will reduce CI failure noise.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduce TagoIO IoT Cloud HTTP post client example. This explorer
Zephyr network resources to demonstrate an end to end application.
The TagoIO allows that any user can test on a easy way Ethernet, WIFI
and Modem (PPP) with BSD sockets. The example provides overlays to
configure WIFI and Modem.
The application consists an a pseudo temperature sensor that sends
periodically data to TagoIO IoT Cloud platform. The data can be
visualized on a web browser dashboard, cellphone or tablet. The
steps to configure TagoIO are described on the example documentation.
Special Variables:
- CONFIG_TAGOIO_DEVICE_TOKEN DEVID token generated by TagoIO
- CONFIG_TAGOIO_HTTP_WIFI_SSID SSID when using WIFI
- CONFIG_TAGOIO_HTTP_WIFI_PSK PASSWD when using WIFI
- CONFIG_MODEM_GSM_UART_NAME UART label when using MODEM
- CONFIG_MODEM_GSM_APN APN when using MODEM
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Enables the fat_fs sample on the mm_swiftio board by adding a
board-specific Kconfig overlay, and adding sdhc to the list of
board-supported features.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The sample was producing quite a few `<log_strdup alloc failed>`
warnings when running in default configuration on qemu_x86. Increase the
log_strdup buffer count to prevent that.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add bootstrap section to the documentation, explaining how to configure
the Leshan Demo Bootstrap Server locally and run the sample.
Update the download link for the Leshan Demo Server, according to the
upstream Leshan documentation.
Fix bullet list with Leshan security parameters.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add overlay-bootstrap.conf which allows to easily configure the sample
to use the bootstrap server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The es-WIFI driver is used by Inventek's es-WIFI shields. This enables
wifi sample to build all variations to ensures that dependencies are
meet.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Add support for the Solomon SSD1306FB device to the CFB custom font
sample.
Convert sample to use DT_LABEL() for obtaining the device label instead
of hardcoding it.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
WebUSB sample is using BOS descriptor. Because of that
the bcdUSB field of device descriptor is set to 0x0210.
This requires for the BOS descriptor to have LPM support.
LPM support use additional descriptor that the HOST can
read by requesting BOS desc. The descriptor is called
Extension descriptor and is specified in `USB Link Power
Management ECN` document considered a part of USB 2.0
spec.
This patch adds missing part of the BOS descriptor and
fixes issue with webUSB sample not passing i'LPM L1 Suspend
Resume Test' from USB3CV test tool.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Removes text from the readme of the onoff_level_lighting_vnd_app
claiming buttons control the LEDs before provisioning, as it's not
accurate.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
using CONFIG_NET_BUF_POOL_USAGE monitor avail_count,
this variable should be protect.
Protecting it by using atomic variable
Signed-off-by: Ehud Naim <ehudn@marvell.com>
This sample allows to test the led-pwm driver. The first "pwm-leds"
compatible device instance found in DT is used. For each LEDs attached
to this device (child nodes) the same test pattern (described below) is
executed. The LED API functions are used to control the LEDs.
Test pattern:
For each PWM LEDs (one after the other):
- turn on
- turn off
- increase the brightness gradually up to the maximum level
- blink (0.1 sec on, 0.1 sec off)
- blink (1 sec on, 1 sec off)
- turn off
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Currently all provisioning procedure into common source
files call `prov.c`, that will not compile separately.
Add `BT_MESH_NODE` to control whether nodes are supported
and device provisioning is supported, this will be used in
provisioner role.
Add more provisioner OOB authentication method.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
In the flash partition definitions for ARM boards,
the link to the legacy partition macros does not
exist any more. The commit cleans up the partition
definition by removing this link.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This fixes the documentation instructions for building the SMP Pi
sample program, which incorrectly listed an underscore instead of
a path separator slash.
Signed-off-by: Steve Winslow <steve@swinslow.net>
It is useful to see the name of the handler thread for debugging
purposes so set it when starting the handler thread.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Saves quite a bit of memory on MMU-based systems which manage
page tables at the memory domain level.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Memory domains can be very expensive to instantiate. Demonstrate
how the default memory domain can be re-purposed for an
application, much like how the main thread already is.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Split CP and PD samples into dedicated directories as the difference
between the two are expected to grow with time. Also, do some
refactoring.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Minimize number of exported methods by unifying all osdp_cp_send_cmd_*()
as osdp_cp_send_command().
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Adds a test case listing in sample.yaml of the mesh_provisioner sample,
building on qemu and the Nordic nRF51 DK to ensure that the provisioner
role is built in PRs.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Power management sample for that board has very
confusing name that should be changed to something
more understandable.
Current name sample.board.sample.board.mec15xxevb_assy6853
I suggest to have new name
sample.board.power_management.mec15xxevb_assy6853
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
LORAWAN_ACT_* should be assigned instead of LORAWAN_CLASS_*. Previously
used LORAWAN_CLASS_A has the same integer value as LORAWAN_ACT_OTAA, but
update code with the latter to use the proper type.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
The overlay file defines an i2c interface for the
Feather nRF52840 Express and the Adafruit BME680.
Also adds the platform to the test build configuration.
Signed-off-by: Patrick K. Moffitt <patrick@moffitt.com>
Add commands to suspend or resume the GSM modem. These commands
might not be enough as at least the SIMCOM 808 modem requires
that the modem is reset when it is resumed, and this application
does not do any reset atm.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add nucleo_l552ze_q_ns board to the allowed list of platforms
for the tfm_ipc sample. This allows the sample to be built for
the nucleo_l552ze_q_ns platform by sanity check.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Fix the name of the sample in the .yaml file so it matches
the sample directory, and does not collide with tfm_ipc.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the samples' documentation we update the requirements
for building TF-M binaries according to the latest upstream
TF-M documentation.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add documentation on how to build and run the TF-M integration
samples on nRF platforms.
The arm-none-eabi-gcc does not need to be on the PATH anymore
for building and running the tfm_ipc sample on nucleo so remove
the note from the sample docs.
Fix some paths for TFM binaries for the LPC board as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adapts the DTS overlay for nucleo_l552ze_q_ns
board, to comply with the changes applied in the flash
layout of the TF-M build.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Changes required in TF-M integration samples CMakeLists.txt
files due to the new upstream TF-M build system. In brief,
configuration related to PSA API (IPC), Regression, and
Isolation level needs to be passed, now, directly, not
via invoking a given TF-M CMake configuration.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding support for TF-M in the Nordic nRF9160 DK.
Allow the TF-M integration samples to be built and
executed for nRF9160 DK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
TF-M related information in the relevant board definitions
needs to be updated in the wake of the new TF-M Build
system.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Always run thread_b on CPU 0 by setting cpu_mask if on SMP system.
Run this with CONFIG_SCHED_CPU_MASK=y set on an SMP system.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Users testing beacon capability will likely want to see the beacons in
a sniffer tool. Switch to an advertising mode that uses a persistent
known address, and display that address on the console output.
This also demonstrates techniques to retrieve the advertising address
where one is known.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The x_nucleo_iks01a2 shield supports both standard (Mode 1) and
sensorhub (Mode 2) modes through proper dip switch selection.
For more information please refer to:
https://www.st.com/en/ecosystems/x-nucleo-iks01a2.html
This commit moves the original (Mode 1) support under 'standard'
directory and adds the Mode 2 support into 'sensorhub' directory.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The legacy macros were first deprecated in Zephyr v2.3. Now that
Zephyr v2.4 has been released, that makes two releases where these
macros have been deprecated, so it's OK to remove them.
This leaves support for legacy binding syntax in place. Removing that
is left to future work.
We need to update various pieces of documentation related to flash
partitions that never got updated when the new API was introduced.
Consolidate this information in the flash_map.h API reference page,
since that's really where users will run into it. This also gives us
the opportunity to improve this documentation.
Adjust a couple of kconfigfunctions.py and sanitycheck bits to use
non-legacy edtlib APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This sample application shows how to configure an end node in Class-A
mode and to send data to network server via gateway.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Testing the sample with Zephyr SDK 1.14 (vs 1.13) with qemu_x86
showed that it consistently crashes on 2th-4th iteration. Avoid
bite-sized increase this time, and dump stack considerably to
avoid constant need to update it.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Currently, after `CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP` is enabled,
the LwM2M engine will initiate bootstrap procedure on each run. This
approach limits the flexibility of the application, as it's not always
necessary to go over the bootstrap procedure (for instance, the
application may decide to store the security object obtained during the
bootstrap in flash, and restore it on boot).
Fix this by introducing an additional `flags` parameter to the
`lwm2m_rd_client_start()` function, which provides information whether
to run bootstrap in the current session or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After HW stack protection option was globally enabled for
nRF SoCs turned out main stack size is too small for
USB mass storage sample. Increase to avoid overflow.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
In npcx7 series, all of them support the Intel Enhanced Serial
Peripheral Interface (eSPI) Revision 1.0. This specification provides a
path for migrating host sub-devices via LPC to a lower pin count, higher
bandwidth bus. In addition to Host communication via the peripheral
channel, it provides virtual wires support, out-of-band communication,
and device mastering option over the Chipset SPI flash.
Becisdes introducing eSPI device in npcx7, this CL also includes:
1. Add eSPI device tree declarations.
2. Add npcx7-espi-vws-map.dtsi to present the relationship between eSPI
Virtual-Wire signals, eSPI registers, and wake-up input sources.
3. Zephyr eSPI api implementation.
4, Add OOB (Out of Band tunneled SMBus) support.
5. Add configuration files for eSPI test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
It's copy of openthread conf from samples/net/sockets/echo_client,
but requires increasing of main stack size to avoid crash.
Also fixes building if CONFIG_LWM2M_DTLS_SUPPORT is enabled #28787.
Signed-off-by: Kiril Petrov <retfie@gmail.com>
Provide device tree flash partition in order to configure
and flash non secure binary.
Flash partitioning depends on TFM configuration and use case,
so it is provided as an overlay in the sample it is used.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Remove Adafruit/Seeed TFT hardcoded settings. Note that undocumented
ILI9340/1 settings have been removed (maybe Seeed is using another ILI
variant?).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Remove obsolete include of the shell_uart.h file.
It is sufficient to include the shell.h file.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
The up_squared board suffers the same issue as qemu_x86_64
where a bigger stack is needed but CMSIS has a limit on
how big the stack can be. This results in stack overflow.
So exclude up_squared in samples.yaml.
Fixes#28552
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
fixes following cmake warning:
CMake Warning at ../../kernel/CMakeLists.txt:54 (message):
Single threaded mode (CONFIG_MULTITHREADING=n) is deprecated
Signed-off-by: Alexander Kozhinov <AlexanderKozhinov@yandex.com>
Deprecate the Kconfig option for the time being. Unless a contributor
volunteers to take over the work to maintain the option, it will be
removed after 2 releases.
Relates to #27415.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
From 2.3 to 2.4 the net samples pair echo-server/client increase the
SRAM requirements. Since CI doesn't build all combinations, (even for
a release like 2.4.0-rc1) the problem was detected only now. Decrease
buffers for atsamr21_xpro on both echo_server/client sample pair.
Fixes#28341.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
In some cases we were returning empty thread names, so make sure we
check for the thread names correctly.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead if printing the line number, output the context (thread,
semaphore, mutex, ..) and the ID of the event where applicable.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This adds the option to disable kernel memory pool when
multithreading is also not enabled. This saves some
code space.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
ESPI is supported in MEC15 chips but similar to PECI, I2C, eSPI bus
testing requires another device to act as eSPI host.
While this sample can be run in EVB the HW connection to a eSPI host
(Intel RVP) is not documented/supported.
Mark as not supported in that HW only in Modular card
(which setup is documented)
Also remove duplicate definition of the "depends_on: espi"
in the end of the sample.yaml file
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Remove reference to a specific board, since that board doesn't have
this sensor.
Add a dependency on presence of a devicetree node that will be
required to build the driver.
Add a fixture that identifies the specific sensor required to run the
sample. This should be added as a side effect of specifying the
shield (though this is not currently done, it must be added in the
device description).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The test for this sample requires a usb connection to a secondary port,
output is not captured on the default usb port.
Fixes#28154
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
After adding 'Multicast group filtering' (commit b7b73d0) server should
join CoAP IPv6 multicast group to accept multicast CoAP messages.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
The CANopenNode stack function CO_delete() takes a void
*CANdriverState argument. This maps to a pointer to a struct
canopen_context in Zephyr.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Increase stack size to 1200 for echo and echo_async sample apps
(following a similar increase done to echo_async_select previously).
With default stack size, the apps no longer run (crash QEMU) with
Zephyr 2.4-pre.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The default timeout used (500 ms) turns out to be too small for certain
servers (test.mosquitto.org), rendering it impossible to connect (the
TCP connection was closed before the actual Connect ACK response
arrived). Increase the connect timeout to cover this case.
Fixes#28181
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
APP_TX_RX_TIMEOUT and APP_NET_INIT_TIMEOUT were not used in any way
in the sample and test apps.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
HID API has changed and now all usb HID callbacks require
pointer to device as a first parameter. This patch is fixing
regression issue.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Two samples require interacting with keyboard and mouse, and that
means necessary to provide correct fixture before run of that samples
in sanitycheck system. To skip or run the sample according to the
provided fixture in map-file necessary to add fixture definitions
into sample.yaml files
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
A change to the previous partition resulted in the unit address being
inconsistent with the reg property.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Configure build variable BL2 depending on board configuration. BL2 is
set to True by default. BL2 enabled building TFM with MCUboot.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
When running shell commands updatehub alloc data from shell stack.
Increase shell room stack to avoid shell issues. Memory tuning
should be performed accord with available resources.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Added a Bluetooth Peripheral sample that demonstrates how to use
GATT Object Transfer Service.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Add the supported features section to serpente.yaml and overlay files
to the corresponding tests and samples.
Signed-off-by: Alexander Falb <fal3xx@gmail.com>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The _gatt_ infix was determined to be unnecessary as
GATT is implied by it being a Bluetooth service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use time(), localtime_r(), and asctime() to confirm that the
declarations required for these (newlib) libc functions are made
available in CONFIG_POSIX context.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit extends USB hid API callbacks by adding
'const struct device *dev' parameter. If the application
configured more than one HID device then it must specify
separate hid_ops for each device as its unable to determine
for which device the callback was called.
This patch makes it possible to have only one hid_ops within
the application and the application is aware for which device
the callback was called because of explicit device pointer.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Some of the names used in `struct osdp_cmd` where directly as in the
specification. Initially it appealed to keep them like that but with
time, a little more consistent naming of members helps if you haven't
read the specification document very recently.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Add a OSDP CP mode sample that sends out a periocic command to a
connected PD. It also demosnstrates key press and card read callback
registration.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
nRF53 application core does not have RNG peripheral.
Software implementation must be used instead.
This patch adds config overlay for hid-cdc nRF5340 sample.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Added, build only, native_posix_64 board to sample.yaml file.
This will cover both compilation of the SDL display driver and
kscan driver.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Receiver part reworked to not block in interrupt and rely on assumption
that uart_fifo_read is capable of reading incoming data from the HW.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Given that TLS/DTLS socket now creates an underlying TCP/UDP socket, the
FD consumption is increased in echo_client and echo_server.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Sample example built with gdbstub enabled. Two serials are used, one for
normal output and another one that is used talk with gdb in the host
machine.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add support for running the JEDEC SPI NOR flash sample on the ARM
Cortex-M3 DesignStart FPGA reference implementation.
Special care is needed to avoid overwriting part of the FPGA
configuration bitstream, which is stored in the onboard QSPI flash.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add configuration and overlay files for Adafruit feather nRF52840.
README has also been updated and improved. Documentation related to
littlefs has been moved to an independent section as it could apply to
any sample.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Following the change to use the C domain for parsing, update all
existing :cpp:func: references to :c:func:. Remove the parentheses as
well, if used, because they are not needed, this is already known to be
a function, and how it is displayed in the documentation later is a
semantic decision done by the output builder.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Trims the default memory configuration for the BBC Microbit in mesh
samples to ensure that it fits.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add sample where a fictious lenghty operation is required before a more
elaborate handshake is perform with eSPI master.
This requires sending SLAVE_BOOT_DONE virtual wire explicitly.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This sample controls up to 12 LEDs connected to a LP503x driver.
First, for each LED information is retrieved using the led_get_info
syscall and printed in the log messages. Next, from an infinite loop, a
test pattern (described below) is applied to all the LEDs simultaneously
(using the led_write_channels syscall) and then to each LED one by one
(using the led_set_{brightness,color} syscalls).
Test pattern:
For each color in red green blue white yellow purple cyan orange:
- set the color
- turn on
- turn off
- set the brightness gradually to the maximum level
- turn off
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
The spi_flash_w25qxxdv driver has been superseded by the generic
spi_nor driver for over a year. The only non-refactoring change to
the W25Q driver in the last 18 months was done to support a backport
to 1.14.
All devices supported by spi_flash_w25qxxdv driver are expected to be
supported by the spi_nor driver, using the standard `jedec,spi-nor`
devicetree compatible. No in-tree devicetree files make use of this
driver.
Remove the confusion about which driver to select by removing the
unmaintained redundant driver.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add CONFIG_NET_CONFIG_AUTO_INIT=y to enable the bluetooth
device network interface.
Due to #27405 feature PR allowing application to init the network
whenever it wants, IPSP sample stopped initing the
bluetooth network.
The IPSP sample was not updated to enable
CONFIG_NET_CONFIG_AUTO_INIT in prj.conf
and didn't call net_config_init_app(...)
as suggested in the feature PR.
Signed-off-by: Jeremy LOCHE <lochejeremy@gmail.com>
This commit adds the signing commands and the configuration required
to build a non secure image for a nucleo_l552ze_q.
Signed-off-by: Nolwenn Violette <nolwenn.violette01@st.com>
If user has enabled SOCK_DGRAM support for AF_PACKET type, then
use that in the packet sample application instead of SOCK_RAW.
This simplifies the application as we do not need to handle
the Ethernet frame when sending or receiving the packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Align all Kconfig option names with LVGL names. The followed rule:
LV_(.*) -> CONFIG_LVGL_(.*).
Also replaced LVGL boolean configuration entries using if/else/endif
with direct IS_ENABLED macro.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This commit adds the LiteX I2S devices usage example with:
- i2s rx and tx initialization,
- i2s rx and tx configuration,
- i2s rx receiving,
- i2s tx sending.
An application is a simple sound loopback - it allows to connect
a music source and a receiver such as headseat and listen to it.
Signed-off-by: Pawel Sagan <psagan@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Make the flash-backed USB mass storage sample depend on usb_device and
flash instead of just flash.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add support for running the JEDEC SPI NOR flash sample on the ARM
Cortex-M1 DesignStart FPGA reference implementation.
Special care is needed to avoid overwriting part of the FPGA
configuration bitstream, which is stored in the onboard QSPI flash.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
When try build updatehub using overlay-dtls.conf system fail with
cannot create privkey.der.inc file, permission denied. Add missing
gen_dir cmake definition. Update updatehub sample test config to
run missing dtls build test.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add both .conf and .overlay files for the nRF51 dongle, which is still
used and was missing configuration files.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use non-default frequency 25MHz and Quad mode to ensure
frequency configuration is taking effect.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
An off-by-one error calculating the number of parameter headers caused
a third table to not be displayed.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add DT entry for the embedded QSPI NOR flash (GD25Q16) in the Adafruit
nRF52840 feather. Also added support for the spi_flash sample, which has
been used to verify the device.
NOTE: Device seems to fail when using high clock frequencies (e.g.
maximum QSPI frequency). It may be due to PCB layout issues.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Instead of unknown clock accuracy, set it to 1ms for native_posix
boards. This looks better in TSN monitor.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add gPTP multiport support to native_posix Ethernet driver.
This means that the driver is able to create more than one
network interface and enable gPTP to each of them. This requires
that net-tools is updated as it contains configuration file
for network interfaces in host side.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add overlay that includes only the shell transport of mcumgr, without
bringing in BLE as well. This can be used as an alternative for the
serial transport. The `smp_svr` README was updated accordingly.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Value of ret has been overwritten by flash_write_protection_set
before it could be returned from do_write_unaligned, which could
lead to reporting success when error code should have been returned.
Fixes#27641, Coverity-CID: 212142
Fixes#27642, Coverity-CID: 212143
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add a tag at sample.yaml to exclude the platform mec15xxevb_assy6853
because of unsupported. Refer github issue #27576.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
Create two threads, one for receiving packet socket data and
the other for sending raw Ethernet frames.
Add flood option where it is possible to stress test the IP
stack. Flooding is disabled by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A zero value in the NPH header indicates one parameter header.
Increase the upper bound to process the last provided table.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
GPIO CSn active level transitioned from default active-low to
devicetree defined since the last time this sample was verified,
requiring the flags parameter in devicetree to be updated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The boards efr32_radio_brd4104a, efr32_radio_brd4250b and
efr32mg_sltb004a have an on-board nor flash. It is already present in
the device tree, only the driver needs to be enabled.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
Its possible to rename the executable we build via the Kconfig symbol
CONFIG_KERNEL_BIN_NAME. So we really should use ${KERNEL_ELF_NAME},
${KERNEL_BIN_NAME} and ${KERNEL_HEX_NAME} variables instead of hardcoded
zephyr.elf, zephyr.bin, and zephyr.elf.
This fixes an build issue with
tests/misc/test_build/buildsystem.kconfig.utf8_in_values on
up_squared_adsp and lpcxpresso11u68 platforms.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit allows let build zperf sample with overlay-netusb.conf.
USB subsystem must be enabled by the application.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
usb_enable() must be called by the application.
The application may want to register usb_dc_status_callback
and trace usb status codes (usb_dc_status_code).
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This patch removes unused Kconfig option from console
subsystem. If application wants to wait until the console
port is connected, enabled and ready to receive data
it should use uart_line_ctrl_get() API function and
check for DTR flag.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
usb_enable() must be called once by the application.
The application may want to register usb_dc_status_callback
and trace usb status codes (usb_dc_status_code).
After this patch all pre APPLICATION messages will be dropped
as USB console device is enabled in the application.
Application waits for console device until its ready by checking DTR
flag - uart_line_ctrl_get(). This function could be dropped but then
some log messages that were generated before USB device is ready
could also be dropped.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit adds a PD sample for drivers/osdp. It receives OSDP commands
and prints a message to console.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
USB device shall be able to send only in CONFIGURED state.
Zephyr USB HID device class allows to send the data no matter
of the USB state what is wrong. Attempting to write to endpoint
buffer in state != CONFIGURED may lead to driver error.
This patch introduces state tracing for USB HID class and
allows to send data using hid_int_ep_write() class API
only if the device remains in CONFIGURED state.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Add a fixture since we need at least two boards connected for this test
to run correctly w/real hardware.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add for various flash runners (pyocd, nrfjprog, and dfu-util) to do a
full chip erase. This is needed for the sample to pass in sanitycheck
on real hardware.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There is an additional prj_smp_svr.conf configuration file provided,
which builds an image with mcuboot support. Enable it in sample.yaml,
so sanitycheck can detect build failures in future.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
There is an optional mcumgr enabled prj_smp_svr.conf configuration
file. Using it results in following errors:
.../src/smp_svr.c:12:10: fatal error: mgmt/buf.h: No such file or \
directory
12 | #include <mgmt/buf.h>
|
Fix include paths to keep sample buildable with mcumgr enabled.
Fixes: c200b1c5e6 ("mgmt: Move mcumgr into its own folder")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Remove dependency on CONFIG_BT_ACL_FLOW_CONTROL and use
CONFIG_BT_L2CAP_RX_MTU always to set L2CAP RX MTU.
The ATT MTU is set from two different KConfig options depending
on if CONFIG_BT_ACL_FLOW_CONTROL is enabled, which makes it
a confusing option and hard to provide a conf file that
supports multiple board configurations.
This changes the behavior when CONFIG_BT_ACL_FLOW_CONTROL and
CONFIG_BT_BUF_RX_LEN was used to set the L2CAP RX MTU, and by
extension the ATT MTU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix smp_svr Bluetooth configuration for when BT_HCI_ACL_FLOW_CONTROL
option has been enabled. In this case the CONFIG_BT_L2CAP_RX_MTU
is used instead of CONFIG_BT_RX_BUF_LEN to set the RX MTU.
This lead to a negotiated MTU of 23, which is not supported by
the SMP_SVP protocol.
Removed the board specific configuration files as these are just
duplications of the overlay-bt.conf or overlay-bt-tiny.conf and
the readme specifies how these should be used.
Reduced the TX MTU to end up with the same value as the RX MTU,
CONFIG_BT_RX_BUF_LEN - 4 (HCI ACL header) - 4 (L2CAP header).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Removes 'flash' command function that displays the command's subset.
Command's subset will still be displayed in current code.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
On large memory areas printing 8 bytes/line is not enough.
Increased printing 16 bytes per line.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Adds unaligned and pattern write functionality.
The reason this was added is chips with large pages, e.g. 256 can't be
normaly writen via shell, thus the need to write a pattern with any
length to a memory area.
The unaligned write command allows writing a data frament in any place
in memory, the data backup, protection, erasing and writing is
automaticaly handled. This makes it easier to test all flash controller
functionality in one command, also write any persistent data to any
flash address.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The previous commits added the SAM0 DAC driver. Now document and
enable it, including enabling it in the DAC sample.
Signed-off-by: Michael Hope <mlhx@google.com>
Fixes#27266.
cmd_hdr and acl_hdr local structs were read but never written.
Causing unpredictable errors in bt_tx_thread such as :
"Invalid HCI CMD packet length" in hci.c:2280
or Imprecise data bus errors on nrf52810.
cmd_hdr and acl_hdr are now filled with the received data
from SPI Master.
Signed-off-by: Corentin Dorothée <corentin.dorothee@gmail.com>
A proper way to match a Security object instance with a Server object
instance is via Short Server ID resource. Both coupled object instances
should carry the same value of this resource in order to me considered
matched.
This was not implemented in the LwM2M library and it was incorrectly
assumed that the Security object instance index corresponds to the
Server object instance index. While such apporach works is simple
scenario, it might yield incorrect results when bootstrap is used.
Fix this, by verifyng the Short Server ID resource in the Secuirty
instance used, and finding a matching Server instance. The server object
instance is stored for future use in the engine.
Additionally, remove an extra Server object instance that was created
when the bootstrap procedure was used. Since the boostrap Security
object instance does not have the corresponding Server object, it's
enough to have a single Server instance.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Now that the relevant APIs generalize properly for bindings without
flags, we can remove some special case checks from the tree.
I couldn't find any more, but I did this kind of quickly, so it's
possible I missed some.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Zephyr introduced subsys/mgmt folder for MCU management. Move UpdateHub
sample to its correspondent folder at sample/subsys/mgmt folder.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
In order to be able to add more entries under 'subsys/mgmt', move the
current contents of it, which relate exclusively to MCUMgr, to its own
folder.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The fs_open has been extended with support for open flags.
Currently supported flags are:
FS_O_READ -- open for read
FS_O_WRITE -- open for write
FS_O_CREATE -- create file if it does not exist
FS_O_APPEND -- move to the end of file before each write
The FAT FS and LittleFS front-ends within the Zephyr has also been
modified to utilize the flags.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Applications using IPM callbacks get the imp device instance pointer
now through the callback. Which help to clarify a bit the code here and
there as well.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It was already using uart_irq_callback_user_data_set below, now it also
uses uart_irq_callback_user_data_t as callback type, so let's normalize
the callbacks.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Update hci_uart sample configuration for buffers to work with the
extended advertising HCI commands and events.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Continuation of abafd8eb22 which missed to update the
board configuration for nrf9160dk_nrf52840.
Update main stack size for nrf5 boards. This is to support an
alternative hci_driver that has a higher stack size usage in hci driver
open. Measured stack usage in this case to 808/1024.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the nrf51_blenano board configuration which does not build,
exceeding the SRAM with over 2k bytes.
Align the configuration with the same options used to make the
bbc_microbit board build for nrf51 with 16K SRAM.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Set name on HCI TX threads in HCI samples to make it easier to debug
stack size usage with CONFIG_THREAD_ANALYZER.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a note to warn users about the need to adjust
CONFIG_LOG_STRDUP_BUF_COUNT and/or CONFIG_LOG_STRDUP_MAX_STRING when
deferred logging is enabled.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Update LVGL to version 7.0.2. Notable changes in v7 include:
- New drawing system (note that it uses much more ROM than previous
versions)
- New style system
- Some objects have been renamed (current changes do not align yet
Zephyr Kconfig settings with LVGL)
- New fonts with more sizes (e.g. Montserrat, replacing Roboto)
- Theme changes (most have been removed, default is now Material)
Note that constant defaults have been aligned with LVGL.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
TI CC32xx does not support binding the same port to multiple sockets,
but instead uses the IPv6 socket to handle both IPv4 and IPv6
connections. This commit modifies the sample to reflect this.
In addition, Kconfig options are overridden in order for the sample
to take advantage of wifi and socket offloading on this platform.
Signed-off-by: Vincent Wan <vwan@ti.com>
Adds native_posix hw counter model and the counter driver.
Functionality is needed by software which is tested
on native_posix and has dependency on counter.
Hardware model was developed similarly to HW timer model.
The counter driver wraps HW counter functions and exposes
basic functionalities: starting, stopping, setting and cancelling
single channel alarms.
Code was tested against: tests/drivers/counter/counter_basic_api.
Signed-off-by: Filip Zajdel <filip.zajdel@nordicsemi.no>
Ensure multiple OOB transactions can be perform back-to-back
Check OOB transaction response length matches is as expected.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This sample is nothing more than just a special setup of UART for some
nfc, has nothing specific to nfc and might be misleading, so removing.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On TI CC32xx, the same port number cannot be bound to different
sockets. Instead, when an IPv6 socket is bound it can handle both IPv4
and IPv6 connections.
Signed-off-by: Vincent Wan <vwan@ti.com>
Fix compilation error when the DIAG module is enabled.
All core functionalities are provided.
Signed-off-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Add a sample to demonstrate and test the Wurth Elektronik WSEN-ITDS
accel sensor. Sample code covers accel and die temperature functions.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
The current shield version shows different configuration, including
disabling default ethernet and wifi interfaces. To allow easy
connection from standard headers, this add two new shield designations.
The existing boards overlays and defconfig were updated.
The documentation was update to reflect changes. A new supported
variations section helps to understand what shield variation user need
select to build their own system.
This changes requires changes on esp32 offload tests to reflect new
esp_8266 shield designations. Sam4e_xpro was keeped as the only one
with dedicated overlay and both frdm_k64f and disco_l475_iot1 were
moved to use standard arduino r3 header using extra args.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
After Zephyr 2.3.0 release system uses more RAM. This update
samr21_xpro configuration to allow echo_client be equal to
echo_server configs and remove unnecessary definitions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
After Zephyr 2.3.0 release system uses more RAM. This update
samr21_xpro configuration to allow echo_server run again and
remove unnecessary definitions.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The sam4e_xpro and sam_v71_xult configs are unnecessary. Now
atmel_rf2xx shield will complement all necessary configuration.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The sam4s_xplained and sam_v71_xult configs are unnecessary. Now
atmel_rf2xx shield will complement all necessary configuration.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
extended download progress metrics to Bytes, KiB and MiB
separate number of download iterations for INF and numeric case
Signed-off-by: Alexander Kozhinov <AlexanderKozhinov@yandex.com>
The generic SPI GPIO chip select support now respects devicetree flags
for signal active level. Update all cs-gpios properties to specify
active low.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Sample tries to estimate maximum number of messages that can be
logged. It was using two system cycles and counting number of
messages logged in that window. It did not take into account the
fact that clock frequency may vary and logging speed also varies
(especially if LOG_IMMEDIATE is enabled). Presented results may
be faulty and misleading.
Fix is attempting to adjust window size to increase precision of
the measurement.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Configuration file was left unchanged after development
of USB Audio class. Deleted configs should never be present.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Due to a long standing difference of requirements enabling deep sleep
will by default cause any application that delays for an unbounded
period to power down. On Nordic doing so turns the system off. Show
how to prevent this from happening while still allowing deep sleep
states to be available for the application's controlled use.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add a new configuration option, LORA_SX12XX, that is shared for all of
the LoRaMAC-node-based radio drivers. By default, the appropriate
driver for the LoRa radio in the device tree is included is included
in the build.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
In fat_fs example, if we choose a large size SD card to connect with,
the result of memory size calculation coule be wrong due to the missing
brace for manipulating operator priority.
Fixes#26266.
Signed-off-by: Jui-Chou Chung <jui-chou.chung@nordicsemi.no>
Some of the settings are no longer needed in the sample as OpenThread
configuration manages it by itself.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
This option should be selected by default, as right now LORA=y selects
REQUIRES_FULL_LIBC.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Instead of whitelist, use a filter that checks if a required
"atmel,at45" compatible node is present.
Add a build-only test case to be used by CI and provide a harness
configuration so that execution of the sample can be also verified.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This sample still used the old name of the nrf9160dk_nrf9160 board,
both in documentation and sample.yaml. Because of the latter, this
sample was not picked up by sanitycheck, what resulted in compilation
errors in the spi_flash_at45 driver not caught by CI.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
USB access to the flash device is not synchronized with the
application, so if the application needs to create a new file system
USB may read configuration state that is incorrect. Wait until the
the application is done with the flash before starting USB.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Simplify overall scenario using sntp_simple to keep main MQTT logic more
clear. Also, remove related code which was used only by the old SNTP
code, e.g. show_addrinfo().
Signed-off-by: Alexey Markevich <buhhunyx@gmail.com>
Exclude the NXP LPCXpresso55S16 board from the X-NUCLEO-IKS0xAx
samples, since the rely on having Arduino Uno header A3 available.
On the LPCXpresso55S16, A3 is connected through a resistor (R63) which
is not mounted by default.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Introduced interface for efficient logging from external logsystems:
Added handling of vaargs and automatic strdup to macros intended
to be used in logging interface function. Fast path to less then 4
arguments to speed up the execution. Made log_count_args external,
if external logsystem cannot count arguments.
Signed-off-by: Tomasz Konieczny <tomasz.konieczny@nordicsemi.no>
The sample does not provide a way to verify its operation
and causes fails on nrf platforms. Added regex checks in sample.yaml
so the sample can be verified.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Callback used mqtt_publish_qos1_ack but mqtt_subscribe called with
default 0 value (MQTT_QOS_0_AT_MOST_ONCE)
Signed-off-by: Alexey Markevich <buhhunyx@gmail.com>
New config file to build an OpenThread NCP for the NRF52840-DK
via CDC-ACM USB on the connector J3 (labelled 'nRF USB').
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
zperf takes a potentially unaligned netowrk packet, casts it to a
struct, and then dereferences the fields. This causes a crash on
cores that don't support unaligned access such as the Cortex-M0+.
Use the UNALIGNED_GET helper instead.
Signed-off-by: Michael Hope <mlhx@google.com>
Also, add prj.conf options to make the sample builds on more
platforms. Finally, update the sample source to print explicit
"Finished" message, to let user know that the processing is done.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added separator (e.g. comma or semicolon) parameter to FOR_EACH_ family.
Separator is added between macro execution for each argument and not at
the end.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removed flow control configuration from Kconfig and updated samples
to use device tree for that.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The upload command invokes lfs_stat() on the destination file which
overflows the stack. Adding 256 bytes seems to make it work.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Move to using PRIu64/PRId64 instead of %llu/%lld since on
native_posix_64 the uint64_t/int64_t type is defined in terms of 'long
int' and not 'long long int'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Left unset it becomes the first partition, which is not what's used
for littlefs, and specifically isn't on the external flash for
nrf52840dk_nrf52840.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The flash interface header needs to be available regardless of
selected filesystem implementation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Support for the socketpair(2) system call was recently
added for 2.3.0 .
This change adds a sample application that demonstrates
how it can be used.
Fixes#25527
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add a note for composite (CDC+DFU) device overlay.
Composite device CDC+DFU may not work with Windows OS host.
Windows OS does not send reset after DFU_DETACH request
(does not re-enumerates) and thus make it unable for
the device to restart in DFU mode.
For more details refer to #23337.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Currently system power management does not automatically control
device power, and this example demonstrates high current draw due to
the UART being enabled. Enable device power management and
demonstrate how to manually turn off greedy devices.
Also remove the 60 s delay that confirms we successfully turned off
the residency policy; that's not directly relevant to the purpose of
the sample.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The USB audio samples when added didn't have any tests: sections in the
sample.yaml so they would never get build on any platform as part of
sanitycheck. Add the tests: section and limit the samples to build on
nrf52840dk_nrf52840 as that was the intended platform these samples
where initially developed for.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If build with full POSIX API, use read()/write() instead of
recv()/send() calls for sockets.
We have read()/write() support for a while, but no samples/tests
actually performed at least a build test for it (so it will be
done now).
Fixes: #25407
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This makes the up_squared board default to x86_64.
This also adds a new board, up_squared_32, for when 32-bit
is desired.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Though there were issues with this sample before e959386bd2 ("samples:
servo_motor: cleanups and changes"), that commit introduced further
bugs. This happened because the new pwm-servo alias that commit
switched to wasn't provided by any boards, so it wasn't built in CI.
Before that, however, the recommendation to use bbc_microbit in the
sample documentation was also buggy in a couple of ways:
1. bbc_microbit doesn't have the pwm-0 alias the sample
previously required, so it didn't build on that board
2. the documentation's comment to use pin 0 on the edge connector
is wrong; PWM channel 0 is wired to GPIO P0.0 on the SoC,
which is actually pin 21 on the connector
Fix it all up.
Tested on bbc_microbit. I verified the pinout and also made sure that
the sample correctly generates pulses from 700 to 2300 usec.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Due to counter driver implementation change
"driver/counter/counter_ll_stm32_rtc.c: Add 1 tick to alarm"
It is necessary to adapt sample test (sanitycheck)
to take into consideration 1 tick precision/tolerance.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Add missing sample.yaml file to enable CI build tests. Local tests can
be executed executing sanitycheck:
./scripts/sanitycheck -l --testcase-root samples/net/updatehub
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
The esp32 offload driver is used by shield esp_8266. This shield
doesn't have tests enabled to ensures that dependencies are ok.
This enables wifi sample to validate shield esp_8266 on CI and
consequently esp32 offload driver.
Fixes: #25386
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
The length field for the MCUBOOT slot partitions in Nordic platforms
has always had an extra leading zero suggesting it's a 40-bit value,
being stored in a 32-bit field. Remove the incorrect leading zero to
reduce misunderstanding of the field.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Clean up the board specific samples:
- Do not hard-code the i2c0 device label in the line follower sample.
- Miscellaneous docs cleanups.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Align the docs and source code with other changes done to the basic
samples.
Use numbers 0 and 1 to refer to the LEDs consistently. This matches
the generic devicetree aliases used by Zephyr, instead of using USR1
and USR2, which are specific to 96b_carbon.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Align the sample with changes made to other basic samples.
Move away from 'pwm-0' as a devicetree alias, requiring applications
to define a 'pwm-servo' alias. We are getting rid of the aliases that
just bounce through to node labels as soon as we can, might as well
get the applications ready now.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Align the sample and its documentation with the other basic samples.
Adjust the fade algorithm so that it looks better and takes less time
to verify by taking 2.5 seconds instead of 10.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The difference between "blinky" and "blink_led" is not clear.
This rename makes it more obvious that "blinky_pwm", well,
blinks an LED using PWM.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Align this sample's source code and documentation with other basic
samples.
Adjust the logging configuration and output some additional printk()s
at startup to make it more obvious that initial errors are device
specific and related to calibration.
Fix the period calculation logic so the sample does not stick at the
maximum and minimum periods for two consecutive four-second periods.
That is, instead of setting the pin period to MIN_PERIOD_USEC twice in
a row, do it only once before doubling again, and similarly for
max_period.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clean up the code and fix the documentation, which is out of date and
still refers to information from the days of board.h.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
File system support is built into the Bluetooth overlay, but can now
also be enabled independently for other transports.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Make sure that we have proper network interface which support
VLAN and LLDP in this sample.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use a complete identifier, first two parts are section.subsection, then
at least another part for the specifics being tested.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds a `tfm_level_1` samples app that shows how
to use the PSA APIs in IPC mode in a real-world example.
It makes use of the crypto, initial attestation and secure
storage modules.
Signed-off-by: Kevin Townsend <kevin@ktownsend.com>
This commit adds a minimal sample application showing how
TF-M can be used in IPC mode, with Zephyr providing the
non-secure processing environment image, and linking against
the PSA APIs implemented in TF-M.
This commit also include work from the commit quoted below,
which is included here for attribution purposes:
tfm_ipc: cmake: now using tfm_ipc library created by TF-M module
This commit removes the need for local knowledge of the TF-M
repository structure and files.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
This commits adds a config option to build a PSA trusted-firmware-m
(TF-M) application image for the secure processing environment, and
configures the Zephyr application image for the non-secure processing
environment. The secure and non-secure environment images will be
linked together via the veneer function table that is produced as an
artifact of the TF-M build process.
Signed-off-by: Karl Zhang <karl.zhang@linaro.org>
Use DT_INST_SPI_DEV_HAS_CS_GPIOS() in drivers to determine if we should
utilize CS_GPIO base SPI chipselect handling. This allows us to remove
Kconfig option for this feature.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Clarify in the docs the importance of generating a key type that matches
the configuration used to sign JWT tokens.
Signed-off-by: David Brown <david.brown@linaro.org>
Add the template config values to the prj.conf. These will need to be
changed according to the instructions in the README.rts.
Signed-off-by: David Brown <david.brown@linaro.org>
The instructions on setting the necessary Kconfig values is unclear.
Add a description based on values that can be found in the Google IoT
Core console.
Signed-off-by: David Brown <david.brown@linaro.org>
Add indication when sleep entry/exit counter do not match the test
expectations.
Measure deep sleep entry latency.
Add sleep entry/exit indication via gpios to debug.
Remove unnecessary trailing \n when using logging.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
This commit adds USB audio sample to the Zephyr project.
The sample configures one I/O device:
- Headset (2 channels, Fs=48kHz, PCM format)
Input data sstream is passed to output data stream.
For more details refer to README.rst.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit adds USB audio sample for Zephyr project.
The sample configures two devices:
- Microphone (2 channels, Fs=48kHz, PCM format)
- Headphones (2 channels, Fs=48kHz, PCM format)
Input data stream is passed to output data stream.
For more details refer to README.rst.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Recommend setting up the python-can configuration file before running
the sample Python snippets and remove the GNU/Linux specific comment
from each snippet.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Build a sample variant with CONFIG_POSIX_API enabled, to check that
we have select() call available to applications.
Also, bump stack size, as the app crashes now with the default size.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Update mbedTLS commit along with the following fixes:
* Fix naming inconsistencies in some cipher modes, to match core mbedTLS
configs
* Add Kconfig to enable CTR cipher mode
Fixes#22421
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
OpenThread throws a warning when minimal libc is used, as some of its
new files use stdlib functions not available in the minimal
implementation. It's not critical failure, as those new functions are
not linked anyway in default configuration, but the warnings do not
look well. Therefore, use newlib by default in the sample to prevent
warnings.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The DS3231 is an I2C real-time clock with internal temperature
compensated oscillator, maintaining civil time to 1 s precision with
nominal 2 ppm accuracy from 0-40 Cel.
The basic functionality is exposed as a counter that is always running
at 1 Hz. Much more functionality is exposed as driver-specific API,
including the ability to translate between the time scale of the DS3231
and the time scale of the Zephyr uptime clock. This allows correlation
of events in the system clock to UTC, TAI, or whatever time scale is
used to maintain the DS3231.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This commit adds a sample application intended to present capabilities
of the flash driver for AT45 family chips and to serve as a reference
of how to make use of that driver.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The LoRa shell requires the alias 'lora0' for the default radio. Use
the same alias for the samples to make them portable across different
radios and devices.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Updates the fat_fs sample documentation to reflect that it can run on
multiple boards, not just the nrf52840_blip.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the fat_fs sample yaml to depend on a feature rather than
whitelisting specific boards. This implicitly extends the sample to
mimxrt10{60,64}_evk boards, since they already support the feature.
The only whitelist board remaining is the nrf52840_blip, which requires
a device tree overlay for this sample.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Refactors the fat_fs sample to move board-specific configurations to
separate files and support a shared prj.conf file.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit introduces dedicated return type for custom_handler.
Relevant code is updated to fulfill the API documentation.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Port the I2S and DMIC drivers to the new timeout API so that they do
not need to enable legacy timeouts.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a build-time assert to check that the configured SHM_SIZE
does not exceed the memory allocated as shared memory. USe DT
to extract the shared memory size.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Provide three basic examples to test the x-nucleo-iks02a1 shield:
- Test shield standard mode
Acquire sensor data from shield configured in mode 1.
- Test shield sensorhub mode
Acquire sensor data from shield configured in mode 2.
- Test on-shield microphone
Acquire microphone PDM audio and output it in 16-bit
PCM format to console.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Since this is such a basic sample, it's worth nitpicking the wording a
bit:
- Add a link to the supported boards, since many first time users
will not know where it is and may start near here.
- Remove the single and multi threaded note. There's no information on
how to build it in either of these two modes or what the default is,
so it feels like a distraction for such a basic sample.
- Give a clue about how to build for another board.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
