Use DEVICE_DT_GET on the chosen node directly.
The only in-tree board using the Kconfig option is rv32m1_vega_ri5cy.
It already sets the chosen node in the application overlay, albeit
incorrectly, so just fix it there and remove the now-redundant Kconfig
setting. That in turn triggers other build errors for this board, but
they don't seem to be related to this sample.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use the multiple board revisions feature to provide support for the new
hardware possibilities available in nRF9160 DK starting from v0.14.0.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Use devicetree instead of Kconfig to configure the board control
switches in nRF9160 DK:
- add binding for the switches that provide optional signal routings
on this board
- add binding for the GPIO interface that can be used for communication
(e.g. UART based) between the nRF9160 and the nRF52840 on the DK,
and add GPIO mapping for this interface so that its lines can be used
without caring about of actual pin numbers on both sides
- add binding for one GPIO line chosen from the above interface that is
to allow the nRF9160 to reset the nRF52840
- update accordingly dts files and board specific code for both board
definitions associated with the DK
- introduce .dtsi files that can be included from dts overlays in order
to facilitate the use of the above GPIO interface; modify the overlay
in the hci_uart sample to provide an example of use of those files
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Currently a lot of common kconfig options are being set in
board-specific overlays.
This commit puts them in the main prj.conf.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add both .conf and .overlay files for the nRF51 dongle, which is still
used and was missing configuration files.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update hci_uart sample configuration for buffers to work with the
extended advertising HCI commands and events.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Continuation of abafd8eb22 which missed to update the
board configuration for nrf9160dk_nrf52840.
Update main stack size for nrf5 boards. This is to support an
alternative hci_driver that has a higher stack size usage in hci driver
open. Measured stack usage in this case to 808/1024.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix the nrf51_blenano board configuration which does not build,
exceeding the SRAM with over 2k bytes.
Align the configuration with the same options used to make the
bbc_microbit board build for nrf51 with 16K SRAM.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Removed flow control configuration from Kconfig and updated samples
to use device tree for that.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
We rename the nRF53 Dev Kit board target (nrf5340_dk_nrf5340)
to nrf5340pdk_nrf5340. We update all associated references
in the supportive documentation and all nRF5340-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove prompts from Kconfig options `UART_x_NRF_UART*` that select
the type of nrfx driver (for UART or UARTE peripheral) to be used
for a given instance. This prevents the options from being modified
from configuration files.
Instead, make one of these options selected by default according to the
"compatible" property set for the corresponding UART node in devicetree.
This eliminates the need of changing both the "compatible" property in
devicetree and the Kconfig option selecting the driver type when a user
wants to switch between UART and UARTE for a given instance.
Since all `UART_x_NRF_UART*` options are made "hidden" by this commit,
all their occurrences in configuration files are removed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We rename the nRF91 Dev Kit board target for the NRF52840
controller (nrf52840_pca10090) to nrf9160dk_nrf52840. We
update all associated references in the supportive
documentation and all nRF9160-related cofigurations and
overlay files in the samples and tests in the tree. We
also remove an un-referenced board image file that had
erroneously been part of the documentation of this platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove data length and phy update set to 'n' on board that does not
support these features anyway. BT_CTLR_DATA_LEN_SUPPORTED and
BT_CTLR_PHY_UPDATE_SUPPORTED are both set to 'n'.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove BT_CTLR_DTM_HCI=y config which is not supported for this board.
This produced the following warning:
warning: BT_CTLR_DTM_HCI was assigned the value
'y' but got the value 'n'. Check these unsatisfied dependencies:
BT_CTLR_DTM_HCI_SUPPORT (=n).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor conf files to use prj.conf + board/<board>.conf configuration.
This allows us to have put common configurations into the prj.conf and
have board specific configs in each board file.
This also respects adding additional prj.conf files such as
-DCONF_FILE='nrf5.conf debug.conf' to add debug configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
