This is documented similarly to how other command
handlers are documented. This documents that shell
management is supported, but relies on the example
project for implementation details.
Signed-off-by: Brian Bradley <brian.bradley.p@gmail.com>
deprecate DEVICE_INIT in favor of just using DEVICE_DEFINE directly.
The small handful of DEVICE_INIT users was easily converted to use
DEVICE_DEFINE or SYS_DEVICE_DEFINE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We deprecate nRF5340 PDK and add a note that
the board will be replaced by nRF5340 DK.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds public documentation for the Heartbeat feature in a separate page
under Bluetooth Mesh.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add information how to run two QEMUs and have IEEE 802.15.4 link
layer over UART between them. This is useful if one needs to test
basic IEEE 802.15.4 functionality without a IEEE 802.15.4 radio.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add generated documentation content for known devicetree bindings
using the Binding abstraction which was just added to edtlib. This
works similarly to the way Kconfig content is generated, so extract a
bit of common helper code for doing that out and rename the relevant
files to keep the distinction clear.
Make the documentation build system respect a preset DTS_ROOT. In this
way, out of tree bindings can be added to the generated content by
telling the documentation build system where to find them, identically
to how out of tree bindings can be added to a Zephyr application.
Similarly, make the output directory configurable.
Fixes: #28865
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Rework some section titles and separate the API into its own sub-page
in the reference section.
This is prep work for adding generated reference material on
devicetree bindings.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Minor fix for showing latest version in sidebar, no need for link here
that was added in recent commit.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Mention the newly introduced funtionality for Cortex-M
architecture to force the early-boot initialization of
internal architecture HW state.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This makes it easier to scan. The sorting is done based on the text
that appears in the HTML, not the :ref: label name.
In the case of the DMIC API, change the title of the document to match
the "Audio Codec" document so we can keep those together.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Breathe>=4.23.0 brings in basic xrefitem rendering support and fixes
issues parsing anonymous struct/unions. This version also adds a config
knob for showing or hiding enumerator values, so set it to generate
documentation compatible with previous versions.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Divided doxygen API documentation into zephyr-internal API and
user API.
This make sense as user shall not use zephyr-internal API.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added information about that offsets are expressed in relation to
the flash memory beginning address.
This info was missing which cause misunderstanding of the concept
while contributing.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add description how to enable zero-latency interrupt in the application
code. Previous docs described only the Kconfig and not the flag.
Signed-off-by: Martin Jäger <martin@libre.solar>
Some information on design goals can be updated:
- we have decided against code generation for the time being
- we can do pin muxing via devicetree (this requires soc.dtsi
support, but the necessary devicetree infrastructure exists)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The current policy of always excluding stacks that aren't
owned by the current thread only works well on MPU systems,
where it is very fast to have a reserved MPU region corresponding
to the stack buffer of the current thread.
This unfortunately is not efficient on MMU-based systems, it
would require either a different set of page tables per thread
or an expensive page table update on context switch.
This PR relaxes the documented policy to leave it up to the
implementation whether threads that all belong to the same
memory domain can see each other's stacks.
There's lots of precedent for this, for example on Linux threads
in the same process can all access each other's stacks.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rather than doing a doc build on every PR, limit it to PRs that either
touch a file in doc/, *.rst and what's listed as DOXY_SOURCES in
doc/CMakeLists.txt.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Deprecate the Musca-A board and SoC support to be removed in 2.6.0.
There are a number of issues with the Musca-A and there exists both the
Musca-B and Musca-S1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Exclude (other) build directories with a CMakeCache.txt file as they
typically contain previous output from ourselves.
One key feature of 'out of source" builds offered by CMake is allowing
multiple build directories. For instance to build different
configurations without starting from scratch. Unfortunately, the
extract_content.py code had a severe issue with multiple build
directories with an interesting effect on build times, see simple
reproduction below:
cd doc/
cmake -B _build/
cmake -B _b2
# Repeat these a couple times
make -C _build content
make -C _b2 content
find -name rst
./_b2/rst
./_b2/rst/doc/_build/rst
./_b2/rst/doc/_build/rst/doc/_b2/rst
./_b2/rst/doc/_build/rst/doc/_b2/rst/doc/_build/rst
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Fixes commit 15fbf707ca ("doc: revert to copy files with
extract_content.py directly") that removed (2 years ago!) the definition
of EXTRACT_CONTENT_OUTPUTS while leaving it in use by sphinx-html and
sphinx-latex.
On my Linux box "make sphinx-html" is more than 5 times faster than
"htmldocs", likely because it does not build doxygen nor kconfig.
Also add missing WORKING_DIRECTORY for consistency with regular
targets and to fix this error:
Exception occurred:
File "~/.local/lib/python3.8/site-packages/sphinx/
search/__init__.py", line 284, in __init__
with open(scoring, 'rb') as fp:
FileNotFoundError: [Errno 2] No such file or directory: 'scorer.js'
I don't know when that second regression appeared.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Instead of having a .99 version, use latest and link to the lates
documentation on the left side bar.
The version number has been confusing users where it was difficult to
determine if they were looking at the development tree or some released
version.
Fixes#24453
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We rework the titles and headers of the section where we
describe the process for submitting new module and changes
to existing modules. Move the 'requirements' section at the
top of the page.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We move the section about how to build Zephyr and integrate
with modules into its own section with title
'Integrate modules in Zephyr build system'.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the module documentation page, add a section to describe
the requirements and the allowed practices for synchronizing
the module code base with the upstream project.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
In the module documentation page, add sections for
Testing and Documentation requirements. Add also a
section decribing polices for module deprecation and
removal.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Adding content to describe policies and requirements
around licensing in Zephyr modules.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a section that summarizes the recommended
contribution workflow in zephyr modules.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Submit a paragraph that summarizes the different
individual roles in Zephyr module repositories.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Capture the discussion regarding which external projects
should be considered as candidates for zephyr modules.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Rename the devicetree/adc.h header file to devicetree/io-channels.h to
reflect that io-channels are used for both ADC and DAC devicetree
phandles.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Mention in the board porting guidelines the recommendation
to enable by default the HW Stack Protection feature, and
the rationale behind it.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Hide these away in the reference documentation for now. It seems
rather unlikely that they'll be used by anything other than internal
infrastructure to get started with.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add the first API functions that directly deal with node dependency
ordinals as determined by edtlib:
- DT_DEP_ORD(node_id): node_id's ordinal
- DT_REQUIRES_DEP_ORDS(node_id): list of dep ordinals for node_id's
direct dependencies
- DT_SUPPORTS_DEP_ORDS(node_id): list of dep ordinals for nodes
depending directly on node_id
- DT_INST_ equivalents
This is not meant to be an exhaustive set of macros related to
dependency ordinals; rather, it's a starting out point meant to enable
initial struct device dependency tracking work. We can add more if
needed.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It's great to have full manifest examples that can actually work as they
are, however the number of lines can "dilute" the feature currently
described and distract from it. Add some comments in the manifests to
highlight the current topic(s).
The file tree examples and their descriptions are carefully made up and
generally excellent, however I found my eyes going constantly back and
forth between the two in order to match them with one another and build
the actual, graphical representation in my head. These new comments
attached to the major elements of the trees will IMHO accelerate that
visual representation. What I found especially lacking: clues about
which directories are .git/ clones; a pity in the pages specifically
about git clone organization.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The legacy macros were first deprecated in Zephyr v2.3. Now that
Zephyr v2.4 has been released, that makes two releases where these
macros have been deprecated, so it's OK to remove them.
This leaves support for legacy binding syntax in place. Removing that
is left to future work.
We need to update various pieces of documentation related to flash
partitions that never got updated when the new API was introduced.
Consolidate this information in the flash_map.h API reference page,
since that's really where users will run into it. This also gives us
the opportunity to improve this documentation.
Adjust a couple of kconfigfunctions.py and sanitycheck bits to use
non-legacy edtlib APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It should be possible to submit quick documentation fixes without
depending on a complete west workspace. Fixes the following crash:
Exception occurred:
File "west/src/west/util.py", line 82, in west_topdir
raise WestNotFound('Could not find a West workspace '
west.util.WestNotFound: Could not find a West workspace in this
or any parent directory
Fixes ae8dd14887 ("doc: ext: link-roles: allow non-default baseurl")
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
* Add comments about the default settings
* Change proximity-trigger default to match POR of 'disabled'
* Added reference to datasheet
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The delayed work API has been changed to allow cancellation in
conditions not previously documented, but this feature can cause both
submission and cancellation to fail in the general case. Summarize
the conditions and highlight the importance of checking result codes
for these functions.
Also explicitly note that no kernel API can reliably indicate that a
work item has been completed, and that doing so is the responsibility
of the code that provides the work handler.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Fix broken links generated by link-roles after west was upgrade to
0.8.0. `url` was previously `None` and now returns an empty str.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
This adds a Kconfig option for enabling post-mortem mode of SystemView.
This is useful for crashes that occur after a longer period of time.
Signed-off-by: Mattia Fiumara <mattia.fiumara@bgrid.com>
This is a new DT macro which was added in
c3eef7744a ("include/devicetree.h: Add
DT_ENUM_IDX_OR macro")
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Application protocol APIs are unrelated to each other and change
separately, so it makes sense to have separate entries for each of them.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, after `CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP` is enabled,
the LwM2M engine will initiate bootstrap procedure on each run. This
approach limits the flexibility of the application, as it's not always
necessary to go over the bootstrap procedure (for instance, the
application may decide to store the security object obtained during the
bootstrap in flash, and restore it on boot).
Fix this by introducing an additional `flags` parameter to the
`lwm2m_rd_client_start()` function, which provides information whether
to run bootstrap in the current session or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Use italics more consistently when referring to parameters by name.
Make the ImportFlag members appear.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Remove code and associated tests and Kconfig related to
SETTINGS_USE_BASE64 that was deprecated in Zephyr 2.2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add information about the network management events when user
wants to listen multiple events from different layers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There are two shell sections on documentation. Move last section to
right place to fix documentation style.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add some missing information regarding some nRF
SoC and Boards that were added in the current release.
Make a note that HW Stack protection is now enabled
by default in Nordic-maintained nRF Boards.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Per TSC we will document deprecation for 2.4 but not add
__deprecated tags until the 2.5 merge window opens.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Link roles, aka :zephyr_file: and :zephyr_raw: use a repo's git describe
information to create links but the baseurl is fixed to the upstream
repo. This breaks links created in repos that are forks located
somewhere else.
This commits tries to get the baseurl from west if available so it will
work correctly for forks. If fallbacks to the upstream repo if no
information can be gathered by West, or West is not available.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
How to manage repositories that require authentication to fetch from
using west is a frequently asked question.
TL;DR on the answer is that Git already has credential storage built
in, so our expectation is that there is nothing west needs to do in
particular, as users can select whatever credential helper works for
them, or set up a custom one using something like the GIT_ASKPASS
environment variable.
That's not a very helpful expectation if people aren't aware that
credential helpers exist, though, so let's document that and provide
examples for common use cases, as well as west-specific
troubleshooting advice.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
How-to guide has 0.11.3 SDK
Replace with the latest one SDK 0.11.4 in the documentation
description and links.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Add release notes covering the various ARM DesignStart FPGA related
additions in Zephyr v2.4.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
- use sizeof(struct data_item_type) instead of sizeof(data_item_type)
- use struct data_item_type instead of invalid reference data_item_t
- add aligned typedef struct data_item_type example implemenation
- add note about checking return value for error message
Fixes#19684
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Currently the socket API is not thread safe so mention this in
socket API documentation. The plan is to add locks in 2.5 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a really useful CMake variable that can be used to preserve
the default CONF_FILE value, but "mix in" additional content.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This new ALIAS can be used to add references to Kconfig options. To use
it enclose the Kconfig symbol name like this `@option{KCONFIG_FOO}`.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Enable Breathe SEPARATE_MEMBER_PAGES compatibilty; this option allows
resolution of a huge amount of references that are currently broken
(around 650 based on my grep foo!) due to issues in the Doxygen XML
generation when this option is enabled.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Added note about fixed/changed behavior when too many arguments are
provided.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fixes: #23825
Today, BOARD, SOC, ARCH, DTS, KCONFIG, and TOOLCHAIN_ROOT can be
specified by users or through other CMake files.
It is not clear if relative paths are permitted and/or from where a
relative path is constructed.
Inside CMake, it is very easy to specify `${ZEPHYR_BASE}`,
`${CMAKE_CURRENT_SOURCE_DIR}`, or similar, thus there is no reason to
use relative path inside CMake, as it easy can lead to discussion on
relative to what.
For users manually invoking CMake using, `cmake ... <app-dir>` it is
nice to have to possibility to specify a relative path.
For this purpose, relative path are considered relative to the
`APPLICATION_SOURCE_DIR`.
This commit updates:
- BOARD_ROOT
- SOC_ROOT
- ARCH_ROOT
- DTS_ROOT
- KCONFIG_ROOT
- TOOLCHAIN_ROOT
to allow paths relative to `APPLICATION_SOURCE_DIR` when specified with
`-D<type>_ROOT=<relative-path>`
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Document that some initialization orders that used to work (and
shouldn't have) will no longer work.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Initial draft of release notes for AARCH64 (Cortex-A)
for the Zephyr v2.4.0 release.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Initial draft for Release notes for ARM (Cortex-M)
for the Zephyr v2.4.0 release.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This code had one purpose only, feed timing information into a test and
was not used by anything else. The custom trace points unfortunatly were
not accurate and this test was delivering informatin that conflicted
with other tests we have due to placement of such trace points in the
architecture and kernel code.
For such measurements we are planning to use the tracing functionality
in a special mode that would be used for metrics without polluting the
architecture and kernel code with additional tracing and timing code.
Furthermore, much of the assembly code used had issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Make it actually give the original pointer to the attribute and its
resolved handle so static attributes don't need an extra lookup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixes: #27934
This commit introduces additional naming support of config files.
It is now possible to create a config file of the form
`prj_<build>.conf` and automatically have a corresponding
`boards/<BOARD>_<build>.conf` config file merged.
As example, one can create a structure as:
|-- prj.conf
|-- prj_debug.conf
|-- boards
|-- nrf52840dk_nrf52840.conf
|-- nrf52840dk_nrf52840_debug.conf
when building: (existing behavior)
cmake -DBOARD=nrf52840dk_nrf52840 ...
prj.conf is merged with nrf52840dk_nrf52840.conf
when building: (new behavior)
cmake -DBOARD=nrf52840dk_nrf52840 -DCONF_FILE=prj_debug.conf ...
prj_debug.conf is merged with nrf52840dk_nrf52840_debug.conf
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Identify the special case of /zephyr,user as a node for which property
values are generated without having to define a binding.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit extends USB hid API callbacks by adding
'const struct device *dev' parameter. If the application
configured more than one HID device then it must specify
separate hid_ops for each device as its unable to determine
for which device the callback was called.
This patch makes it possible to have only one hid_ops within
the application and the application is aware for which device
the callback was called because of explicit device pointer.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Those APIs are used for deleting appkey, unbinding an application
from SIG model, unbinding an application from vendor model on the
target node, with matching shell command.
Signed-off-by: YanBiao Hao <haoyanbiao@126.com>
The Health models' shell documentation was mistakenly labeled Heartbeat
Client and Heartbeat Server, and the Heartbeat configuration commands
were mistakenly categorized under these sections.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The documentation claims that Zephyr supports external file system
implementations, and there's no reason not to do so. Rework the API
to allow this.
Note that the file system type cannot legally be an enum anymore,
since we need to support file system types that don't have an
identifier assigned in that enum. Rely on the implicit conversion of
enum values to int to preserve backwards compatibility.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
In some cases it is useful to use the C preprocessor to control the
content of a devicetree file. A specific use case is in testing,
where different combinations of node properties must be checked.
Provide a mechanism to allow arbitrary preprocessor flags to be passed
through CMake to affect the devicetree content.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adds a Config Client API for deleting netkeys on the target node, with
matching shell command.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Some macros were using :c:func: and :cpp:func: which forbids Breathe
from resolving those symbols. Update to :c:macro: for proper resolution.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Following the change to use the C domain for parsing, update all
existing :cpp:enumerator: references to :c:enumerator:.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
`NULL` is not defined in the Zephyr sources, but rather a C definition
which is not resolved when building the documentation and generates a
warning. Fall back to using just emphasis.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Fix some C macros that are currently just emphasized in the
documentation with proper symbol resulition using :c:macro:
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Sphinx>=3.0 includes the `struct` role in the C domain, which provides a
specific way to link to structs, while the old :c:type: role should be
primary used to typedefs. Update existing references, using :c:type:,
:cpp:type: or emphasized symbols that point to structs to use the new
role.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Following the change to use the C domain for parsing, update all
existing :cpp:func: references to :c:func:. Remove the parentheses as
well, if used, because they are not needed, this is already known to be
a function, and how it is displayed in the documentation later is a
semantic decision done by the output builder.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Add __subsystem to list of attributes for the parser, and make the c
parser accept the same attributes than the cpp parser, after the change
to use the c parser for ".c" files.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Older Breathe versions didn't work correctly with the C domain, so there
was a mismatch when refering to functions and #defines, using :cpp: or
:c: depending on the origin of the refered symbol. With Breathe >=4.19
the C domain works correctly so all symbols can be refered to with the
:c: role.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Update methods used to include JS/CSS files, avoiding deprecated
versions the don't work on Sphinx>=3.x. The new methods work on both
Sphinx==3.x and Sphinx>=2.4.x.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
This commit describes add a section which describes how Zephyr modules
are integrated into Zephyr build system and what Zephyr module variables
that are available during CMake and Kconfig processing.
Those variables may be used for refering other Zephyr modules or
including of additional code.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The spi_flash_w25qxxdv driver has been superseded by the generic
spi_nor driver for over a year. The only non-refactoring change to
the W25Q driver in the last 18 months was done to support a backport
to 1.14.
All devices supported by spi_flash_w25qxxdv driver are expected to be
supported by the spi_nor driver, using the standard `jedec,spi-nor`
devicetree compatible. No in-tree devicetree files make use of this
driver.
Remove the confusion about which driver to select by removing the
unmaintained redundant driver.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Depending on how people set up their Python, west might not be on
PATH.
I'd like to have a special-purpose step by step guide for how to
handle this in the documentation to save support time when this
happens. I think it's worth special casing since west is the first
runnable program that pip installs onto a new user's system when
they're following the GSG.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a new listing for the Zephyr BLE Controller. This applies to
the Nordic nRF52 series and Zephyr version 2.2.x.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In 'struct coap_resource' path description:
- the plus symbol represents a single-level wild card in the path;
- the hash symbol represents the multi-level wild card in the path.
This change keeps compatibility with RFC 7252 but allows handling
multiple requests in single function.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
The EEPROM API, which was introduced in Zephyr v2.1.0 and has not seen
any changes since, has multiple implementations supporting a wide
variety of EEPROM backends (SPI, I2C, on-chip, simulator).
Bump the EEPROM API from "experimental" to "unstable" according to the
Zephyr API lifecycle process.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Various API involves functions and data that are conditionally
enabled. Zephyr practice is to exclude data (always) and function
(sometimes) declarations at build time using the enabling preprocessor
macro. This meets functional needs, but blocks generation of the API
documentation as Doxygen will not see the declarations.
Document the need to extend Doxygen's PREDEFINED setting to generate
the documentation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Provide a location for recommended practices that are not related to
coding style. Initialize it with information about the expected
design for callbacks.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Gaps in Kconfig flexibility make it necessary to provide
instance-specific driver configuration through devicetree properties
in certain cases. Because these are not hardware characteristics or
configuration they should be marked as zephyr-specific.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The Kconfig options that formerly controlled this capability have been
removed so rework the "exception" (there is no "precedence" anymore).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Zephyr release 2.1 changed the default settings back end from FCB to
NVS in all Bluetooth samples for performance and reliability reasons.
Update the settings documentation to provide a clue to developers
trying to decide which to use.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This adds a very primitive coredump mechanism under subsys/debug
where during fatal error, register and memory content can be
dumped to coredump backend. One such backend utilizing log
module for output is included. Once the coredump log is converted
to a binary file, it can be used with the ELF output file as
inputs to an overly simplified implementation of a GDB server.
This GDB server can be attached via the target remote command of
GDB and will be serving register and memory content. This allows
using GDB to examine stack and memory where the fatal error
occurred.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix the directory layout examples to use "<board>" when referring to a
board name, and "boards" when referring to the boards directory.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Fixes: #27375
This is a cleanup of the Zephyr CMake package export.
The code has been simplified so that the export now happens through a
CMake script. This avoids several generated CMake build files compared
to previous export mode, and thus removes the need for a CMake pristine
script.
A benefit of this cleanup is that it also fixes#27375.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Using ZEPHYR_BOARD_FLASH_RUNNER relies on a cache variable that
happens to work but is not a supported feature. The appropriate
variable to set is simply BOARD_FLASH_RUNNER.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is covered in the porting guide, and we have complete docstrings
for these macros, but having discussion here helps new users understand
how to use these and why they exist.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some flash drivers are capable of issuing a JESD216 READ_SFDP command
to read serial flash discoverable parameters. Allow applications and
utilities access to that capability where it's supported.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The on-off manager infrastructure is designed to robust asynchronous
transition between binary states where multiple clients may be
initiating a transition from any context. The actual transition is
performed using a manager that tracks the current state and pending
operations. Requests are initiated by passing a reference to an
onoff_client object that holds client state including the notification
mechanism.
This API may be used in subsystems where the transitions for a
particular driver are always synchronous and isr-ok, e.g. setting a
SoC-controlled GPIO. In this situation the full on-off manager
infrastructure is wasteful. All we need is a record of the service
state: off, active count, or error.
Add a data structure and an API that can be used to replace the onoff
manager functionality in a situation where all transitions are isr-ok
and synchronous while retaining compatible behavior from the client
perspective.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
There is nothing wrong with instance numbers and they are
recommended for use whenever possible, but this is an API
design problem because it's not always possible to get nodes
by instance number; in some cases, drivers need to get node
identifiers from node labels, for example.
Change these APIs (which are not yet in any Zephyr release)
to take node IDs instead of instance IDs.
Fixes: #26984
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In Github issue #27548 I found out that documentation has
incorectness. I made fix and described how correctly provide multiple
overlay files for west and cmake. For both of them necessary to use
quotations. After that, necessary to make one more change if you have
multiple files in quotations. For west necessary to separate multiple
files using spaces and for cmake to separate multiple files necessary
to use semicolons.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Add a entry to 2.4 release notes about a need to explicitly
call usb_enable() for applications that configures specific
features.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This device isn't an actual hardware driver: it's a virtual EEPROM
that stores data in an instance-specific RAM buffer, with the data
exposed on an I2C bus as a I2C follower (slave) device that can be
controlled by another device acting as a leader (master) on that same
bus.
As such it's a reasonable example of how to write an I2C follower
driver, but it's not clear that it has a real use in applications. A
Zephyr application that needs to emulate an EEPROM in a real-world
system would be unlikely to provide its data from a RAM buffer.
The sole in-tree reference is in the i2c_slave_api test, so move the
driver implementation into that test.
The Kconfig and hierarchy are being left in place until it is more
clear how this functionality should be selectable within Zephyr. The
I2C_SLAVE symbol has been converted from menuconfig to config to
eliminate a Kconfig style diagnostic.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This commit updates the release notes with the changes introduced
in #26715.
It also informs readers that existing use of `$(SOC_DIR)` in Kconfig
must be updated, for example to use `rsource` instead of
`source $(SOC_DIR)` in order to adopt to latest changes.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit updates the description of SOC_ROOT according to the new
multiple SOC_ROOT enhancement.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The change to use devicetree instead of the config option will break
anybody who has a devicetree that doesn't include the proper active
level for cs-gpios (which is not zero).
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add a document how to get and interpret information about
network TX / RX packet processing statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Document change in how L2CAP RX MTU is set through Kconfig options.
Document recommended new value for applications that have set
CONFIG_BT_RX_BUF_LEN.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit adds description of the build setting support in the
module.yml file.
It is described how additional board_root, soc_root, dts_root, and
arch_root can be appended to the build system.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit restructures the Zephyr module description.
It places the description of the module yaml file in a dedicated section
as this file is common to module inclusion both when using `west` and
without `west`.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces support for multiple SOC_ROOT.
This means that additional SOC_ROOTs specified using -DSOC_ROOT as
argument to CMake will be forming a list together with ${ZEPHYR_BASE}.
This allows for greater flexibility, as developers can now specify
multiple out-of-tree SoCs and not worry about the SoC used for the
board they compile for.
Also it avoid code, such as:
if(BOARD STREQUAL my_board_using_out_of_tree_soc)
set(SOC_ROOT some/out/of/tree/soc/path)
endif()
in application CMakeLists.txt.
Finally, allowing multiple SOC_ROOTs prepares for specifying SOC_ROOTs
in Zephyr modules.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update release notes API change section with information on change to
fs_open parameter list.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Make sure that only those threads that have been granted access
to net_if objects, can call the functions that modify net_if data.
The CONFIG_NET_IF_USERSPACE_ACCESS config option is also removed
as it is no longer needed after this change.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add details of the LVGL7 update (e.g. warn about higher ROM usage,
changed Kconfig defaults, ...)
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Updates the contribution guidelines to document the current board policy
of rejecting non-OSI-approved licenses.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This PR fixes the links to the example files in the Gitlab repository.
Fixes Dir 4.8 and Rule 2.1, 5.1, 5.8, 5.9, 8.5, 8.6, 13.1, and 13.5.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
The mempool implementation doesn't require specific sizes and can
support arbitrary sizes up to the limit of available memory. The
Kconfig documentation on this configuration was confusing user.
Fixes#20418
Signed-off-by: David Leach <david.leach@nxp.com>
The CI style checking solution can produce false positives when it's
given code that it mis-parses, or that follows conventions it doesn't
allow. Document a couple examples, and explicitly note that
maintainers should override the -1 vote if they're encountered.
For those following along in the commit history:
static uint8_t __aligned(PAGE_SIZE) page_pool[PAGE_SIZE * POOL_PAGES];
checkpatch sees "uint8_t __aligned(PAGE_SIZE)" and infers a prototype
for a function "__aligned" that takes an unnamed parameter of type
"PAGE_SIZE". So it adds "PAGE_SIZE" as a known type name.
IOPCTL_Type *base = config->base;
This is common in driver code where the vendor HAL allows typedefs for
structure types. checkpatch was designed for an environment with
limited use of typedefs; "struct IPCTL_Type" would have been handled
properly.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Sort the MISRA lists in a more natural ascending numeric order.
So instead of 1.1 - 1.10 - 1.11 - 1.2 - 1.3, we now have
1.1 - 1.2 - 1.3 - 1.10 - 1.11.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rule 18.6 has the examples split in two files. This PR adds
the correct reference to the example files in the gitlab
repository
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Support running/building only specific tags and ignoring everything
else.
Adding this to a platform yaml file will enable tests with one of of
tags listed to be executed on the platform.
This is useful for special platform configurations used for testing
specific features for example.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds a high-level documentation page for the Bluetooth Mesh Shell
subsystem, documenting all available commands and their parameters.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add a note in 2.4 release notes regarding SW_VECTOR_RELAY
feature, now supported also in Mainline Cortex-M architecture.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a small section that describes the existance of the coding
guidelines page and links to it, in order to raise awareness of the
effort towards complying with those.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Link to the coding guidelines from the main contribution guidelines
page, so that users are aware of the guidelines.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Aside from the MISRA-C derived Coding Guidelines, add a list for
additional ones that are not a subset of a standard.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fixing issues with recent versions of breathe 4.19.2:
WARNING: Unparseable C cross-reference: 'struct device'
Invalid C declaration: Expected identifier in nested name, got keyword:
struct [error at 6]
struct device
------^
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added a link to IEEE GET program web page to suggest
an option of downloading the specification to the users.
Signed-off-by: Uma Praseeda <uma.praseeda@nordicsemi.no>
The generic SPI GPIO chip select support now respects devicetree flags
for signal active level. Update all cs-gpios properties to specify
active low.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Allow feed operations that would stall due to internal peripheral
delays to complete immediately with -EAGAIN indicating that the feed
did not occur as expected.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add the coding guidelines agreed upon by the project TSC with a
description of the staged approach needed to implement them
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We deprecated a number of aspects of the DTS binding syntax in Zephyr
2.1. Remove the support for the deprecated syntax. Remove from docs
about the deprecated syntax as well.
Removed reference in release-notes-2.1.rst to legacy_binding_syntax
since that anchor doesn't exist anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Security documentation contains a code guideline section that is more
about security principles than code guidelines itself. Just removing
the mention do code guideline to avoid possible confusions with
upcoming project code guideline based on MISRA-C.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add release notes for updated HCI driver event handling for calling the
bt_recv() and bt_recv_prio() functions when delivering HCI events to
the host.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add a link to the page describing our development
processes, as it contains the description of how
to identify issues and pull requests as stale.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a small section, clarifying the policies around modifying
contributions submitted by other developers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a small paragraph in the Contribution Guidelines
documentation to stress that cherry-picking of patches
into other pull requests is an allowed practive. Add a
link to additional documentation clarifying policies
around modifying patches of other developers.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
I received feedback that setting e.g. BOARD_ROOT in CMakeLists.txt is
not quite well specified; in particular, it's important to do so
before pulling in the boilerplate via find_package(). Clear that up.
Reported-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Device objects in Zephyr are currently placed into an array by linker
scripts, making it easy to iterate over all devices if the array
address and size can be obtained. This has applications in device
power management, but the existing API for this was available only
when that feature was enabled. It also uses a signed type to hold the
device count.
Provide a new API that is generally available, but marked as internal
since normally applications should not iterate over all devices. Mark
the PM API approach deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
DEVICE_AND_API_INIT and DEVICE_DEFINE are identical except that
DEVICE_DEFINE adds a parameter providing the device pm control
function, while DEVICE_AND_API_INIT does not. This requires duplicate
implementations where if CONFIG_DEVICE_POWER_MANAGEMENT is enabled
then DEVICE_AND_API_INIT delegates to DEVICE_DEFINE with a dummy pm
control function, and if it is not enabled then DEVICE_DEFINE discards
the parameter and delegates to DEVICE_AND_API_INIT.
DEVICE_INIT is like DEVICE_AND_API_INIT but doesn't provide an API.
Clean this up by refactoring so that DEVICE_DEFINE is the core
implementation, providing with and without device power management
right next to each other where they can be compared and maintained.
Redefine DEVICE_INIT and DEVICE_AND_API_INIT delegate to
DEVICE_DEFINE.
Also remove duplicate code by extracting the variations due to
enabling device power management into macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This add a new option `--no-index-modules` which works similarly to
`--modules` but does not generated index pages, only retains the
tweaking of how paths are displayed on symbol information pages,
showing '<title>/path/within/module/Kconfig' for paths that fall
within modules.
This is required by NCS, where there are more "modules" which we don't
want to have indexes for.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Since this is an experimental API and MACRO_MAP() was deprecated in
favor of FOR_EACH() in zephyr v2.3.0, we are within our rights to just
remove it without notice now. Do so and mention it in the release
notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This file contains definitions for macros which are integral to
significant Zephyr use cases, such as CONTAINER_OF() and various
macros used by devicetree.h internally.
As such, in practice we expect at least advanced (if not intermediate)
users to understand it, so the fact that it's not formally documented
as an API with a stability level is a problem.
Fix that by giving the docstrings a once-over and adding new ones
where they are missing. Move all the remaining non-API macros to
util_internal.h.
Add a Sphinx API page for this header, and include it in the API
overview at "experimental" stability level.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Added CONFIG_UART_ASYNC_API to enable documentation generation for
asynchronous API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
It was not clear that hexdump messages does not support prepending
with function name. Added clarification.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The driver API should be assigned at the time the device is defined.
Assigning in the init function is redundant and prevents moving the
pointer to a immutable driver structure.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Now there's an audio reference section move the i2s docs there
as the audio section is a better fit.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
The probe_id keyword was added to support overriding the inferred id
when determining the board-id to use when flashing. Document the
keyword.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Prior to addition of schema validation running sanitycheck
--generate-hw-map would preserve the value of any field in an existing
map that it didn't update. These fields now cause a parsing error.
Add notes as an optional key where information relevant to the board
can be added to provide useful context (such as which serial port
corresponds to the console, or why a non-standard runner is required).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Recommend that Kconfig symbols related to deprecated features use
'DEPRECATED' in the symbol name instead of 'LEGACY'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit updates the Zephyr documentation with changes introduced
by Zephyr CMake package.
It removes 'zephyr-env.sh/cmd' where no longer needed, and updates
boilerplate inclusion to find_package.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
These CVEs have been released from embargo. Include details in the v2.3
release notes, and in the vulnerabilities document.
Signed-off-by: David Brown <david.brown@linaro.org>
This commit fills the Build and Infrastructure section with the Zephyr
CMake package enhancement.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Carles Cufí <carles.cufi@nordicsemi.no>
K_THREAD_DEFINE can no longer use K_NO_WAIT to specify the delay after
the timer API rework. Fix the documentation to use 0 and add a note.
Fixes#25697.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Complete the list of added ARM SoCs and SoC Series
in Zephyr v2.3.0 release cycle.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Complete the list of added ARM Boards in Zephyr
v2.3.0 release cycle.
Add deprecation note for efr32_slwstk6061a.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Describe how an API can be deprecated, which is via the __deprecated
keyword or by introducing a legacy Kconfig option.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
I believe the devicetree documentation for the release is in good
enough shape now. Add a few more links to the release notes to provide
users with more hints for adapting to the new API.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add test cases that verify various bits and pieces of the legacy
devicetree macros match the new APIs.
Writing these test cases without giving rise to deprecated macro
warnings which might break people's CI if they build with -Werror
requires turning off the __WARN() generation in
devicetree_legacy_unfixed.h. The entire file is deprecated at this
point and must be explicitly enabled with an opt-in Kconfig option, so
there isn't any harm in doing this.
Nevertheless, take a minimally invasive approach to avoiding __WARN()
generation in gen_legacy_defines.py, to avoid the possibility of
breakage. This code is basically frozen anyway, so hacks like this
won't cause maintainability problems since it isn't being actively
maintained.
Use the new tests as fodder for a migration guide from the old API in
the documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The ZephyrBuildConfiguration package allow downstream users to control
the Zephyr build system using a cmake package.
A Zephyr Build Configuration package allows for setting of additional
DTS_ROOT, BOARD_ROOT, and similar variables without having to patch
Zephyr repo, but it also allows for inclusion of additional boilerplate
code for more advanced use cases.
The repository or folder containing the Zephyr Build Configuration
package must be on toplevel in the Zephyr workspace.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update V2.3.0 release note for stm32 with:
- Added SoC series
- New boards support
- Noticeable changes in stm32 drivers and subsystems
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
2 useful functions implemented, sample for read()/write() added
(or rather, existing sample to modified to support that).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add some introductory text to these driver helpers which makes it more
clear how they are defined in terms of the generic APIs, which allows
removing some boilerplate from doxygen. This also gives us a chance to
call out the exceptional cases and add some more documentation to those.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Update the diagrams. Doing this in a separate commit so the SVG diff
doesn't clutter up other patches.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Some updates to the reference page for the "core" APIs, and associated
follow-ups in the guides:
- centralize documentation of chosen zephyr nodes in a non-legacy
file, provide a reference to them from the intro page in the guide
- review doxygen docstrings and correct errors for generic APIs
- add introductory text to each section in the API reference
- add missing hardware-specific pages
Documentation for layers built on top of these is mostly left to future
commits, but I do have a smattering of fixes in the guides that I
noticed while I was doing this.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This reverts commit ac898bc49e.
This commit was merged by mistake, but in a way that was against the
decision of the TSC on May 20, 2020, which was to wait a week to let
people digest befor merging.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The sidebar for User Mode wasn't set up correctly and
it wasn't obvious that there are linked sub-pages with
design details about memory domains, system calls, kernel
objects, and so forth.
Split the introductory material into its own overview
page and set up the table of contents properly.
The text of the threat model, high level policy details,
and constraints sections is unchanged.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The ZephyrExtension package allow downstream users to extend the current
Zephyr package.
A ZephyrExtension package allows for setting of additional DTS_ROOT,
BOARD_ROOT, and similar variables without having to patch Zephyr repo.
The repository or folder containing the ZephyrExtension package must be
on toplevel in the Zephyr workspace.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Give instructions how to run multiple Zephyr instances in QEMU
or native_posix, and connect them together.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit updates the documentation so that it no longer requires
ZEPHYR_SDK_INSTALL_DIR and ZEPHYR_TOOLCHAIN_VARIANT to be used when
using the Zephyr SDK.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
The device structure definition in the code has drifted from the
displayed version in the documentation. Update the documentation to
match.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The underlying structure is not suitable for use in API invoked from
user threads for the reasons explained in the edit.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Extend the provided template with annotated examples of API based on
whether the functions must be invokable from user mode threads, since
there are currently no in-tree examples of the specific techniques
required.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
We modify the content around the Release Team formation,
and maintenance, describing in detail how maintainers
may be added to the team. Add a comment about Release
Managers that stresses that they must be members of the
team. Add details on how the TSC shall ensure a functional
release team. Add details on how the release team will
be picking release managers (cadence and selection process).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add a section that clarifies how the project
roles may be removed. We stress that the rules
will apply to elected project roles that the TSC
may define in the future.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We need to clarify how Maintainers may become voting
TSC member, and direct this to the Charter guidelines.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add DT_NODE_BY_FIXED_PARTITION_LABEL that given a "label" in any
fixed-partitions map will return the node_id for that partition node.
Add DT_NODE_HAS_FIXED_PARTITION_LABEL that will test if a given
fixed-partitions "label" is valid.
Add DT_FIXED_PARTITION_ID that will return an unique ordinal value for
the partition give a node_id to the partition.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Include documentation for CVE issues that are now out of embargo. This
includes links to the CVE database, as well as referencing the PRs
within Zephyr that fix these issues.
Signed-off-by: David Brown <david.brown@linaro.org>
Add more HOWTO information for the two current devicetree-based device
instantiation styles, and a bit more information on how to create
devices that depend on others.
Point to this from the Kconfig tips page, since it is meant as a
replacement for existing Kconfig practice.
Update macros.bnf.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
init_fn is not anymore part of struct device, so let's test instead the
driver's API structure pointer which is also unique per device driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We add a note in the Zephyr v2.3.0 release notes to highlight
a renaming in the Floating Point Services main Kconfig options,
which was done in the 2.3 release cycle.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Linux distro might not have a python3-dev package installed by default,
which will give an error during Python dependencies installation.
Closes#25128.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@gmail.com>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Added support for Qemu User Networking and tested with
qemu_x86 model. The support is kept simple assuming that
the TAP interface will always be preferred for more
sophisticated / practical use cases.
QEMU User Networking is implemented using "slirp", which
provides a full TCP/IP stack within QEMU and uses that
stack to implement a virtual NAT'd network. As this
support is built into QEMU, it can be used with any model
and requires no admin privileges on the host machine,
unlike TAP.
Added documentation to facilitate the user.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
The macro iterates through the list of child nodes and invokes provided
macro for each node.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We have a new heap implementation replacing mem_pool. Add docs on its
API and internals, and add a deprecation note to the mem_pool section.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The recent work with k_timeout_t has invalidated much of the existing
timing documentation. Rewrite the section focusing on the new API,
adding details on the internals and driver-facing API. Includes a
porting guide for legacy applications and subsystems.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add some documentation and diagrams for OS library data structures:
dlist/slist, rbtree and ring buffer.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add application control of initiating phy change procedure and it's
parameters.
The reasons for allowing the application control over the PHY:
- Allow changing to Coded PHY.
- Application may change PHY to react to changes in environment
to balance throughput and range.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating data length procedure and it's
parameters.
The reasons for allowing the application control over the data length:
- Bandwidth control adjusted based on number of active connections.
- Changing data length before switching to coded phy.
- Applying workarounds for interoperability problems.
- Controlling order of ATT MTU and data length procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The DS3231 is an I2C real-time clock with internal temperature
compensated oscillator, maintaining civil time to 1 s precision with
nominal 2 ppm accuracy from 0-40 Cel.
The basic functionality is exposed as a counter that is always running
at 1 Hz. Much more functionality is exposed as driver-specific API,
including the ability to translate between the time scale of the DS3231
and the time scale of the Zephyr uptime clock. This allows correlation
of events in the system clock to UTC, TAI, or whatever time scale is
used to maintain the DS3231.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Various commands are getting put into their own sections when they are
really just steps along the way towards getting zephyr and installing
Python dependencies. Group them together in a section by that name,
moving the west install step there.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
