RFCOMM channel range is 1 - 30, 0 and 31 shall not be used since
the corresponding DLCIs are reserved in GSM.
Change-Id: I63ff188e06007208b629a3e3bc22681c0bad239b
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
After some more careful measurements, the worst measured overhead is
288 bytes. Adjust BT_STACK_DEBUG_EXTRA correspondingly to 300 (to give
a bit of playroom still on top of this).
Change-Id: Icdf477b05b40917027314b180c2b69c8c6c759b3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
BT_STACK_DEBUG_EXTRA was adjusted by commit 047c6eacf7,
however it failed to cover this #ifdef section in log.h.
Change-Id: I1a9cd81dc25e9465daba62f0116b2661ac047362
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will be used by the user to disconnect or cancel connect dlc.
This also defines an internal close function which will take
appropriate action based on the dlc state.
In case of user initiated disconnection if some pending packets are
there in queue then it has to be sent before sending DISC packet.
< ACL Data TX: Handle 256 flags 0x00 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Disconnect (DISC) (0x43)
Address: 0x2b cr 1 dlci 0x0a
Control: 0x53 poll/final 1
Length: 0
FCS: 0x6d
> ACL Data RX: Handle 256 flags 0x02 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x29 cr 0 dlci 0x0a
Control: 0x73 poll/final 1
Length: 0
FCS: 0x26
Change-Id: Ie4fa3bd8f6b279fee6fb56ddce198d82c5047849
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Now that printk is the default backend for logging the overhead is not
as bad as with printf. 160 seems to be roughly the worst case amount
of overhead that debug logs now cause.
Change-Id: Ia5937b7318e00cc31c72fa1702c73a57bca0603a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of %2.2x we should use %02x since printk doesn't (currently)
support the former.
Change-Id: I773972e63071b81c95c65de292f12ab14d7c310b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's now snprintk available that's more light-weight on the stack
than snprintf.
Change-Id: I6b3e4409703ca92fe6b8f4146ff47c490ab826cb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications may want finer control of the NRPA used for
non-connectable beacons, and provide it up-front rather than letting
the stack generate one.
Change-Id: I84d459372cc85ed09a8f9cde16dbb9b98dec2a43
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Expose helpers in hci.h for setting and getting the LE random address
type.
Change-Id: I7c6437051f0b2d1f5f79e19b2616bb643ae6300b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fixes defect found by coverity: 152027 Pointer to local outside
scope.
Change-Id: I50f196a04363ffa6e6654b71a9a1d89034580413
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implement the 3 missing HCI commands required to support
Data Length Extensions:
- LE Read Suggested Default Data Length
- LE Write Suggested Default Data Length
- LE Read Maximum Data Length
Note: Only octets are actually used at this time, not time.
Jira: ZEP-1246
Change-Id: Id76d8fedb5ecaf0001c8429cf22f9a3e2c910a44
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use k_current_get() instead of the deprecated sys_thread_self_get()
API.
Change-Id: I4ddb45f299373237690b2f4ca614e7fd3b6c0c36
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This fixes warnings related to the use of nano_work and
nano_delayed_work in L2CAP layer.
Note that k_delayed_work takes a timeout in miliseconds rather than in
ticks thus the timeouts values changes.
Change-Id: I1e3bd7857248865e34a313dd42862af5f4e3805b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch introduces the Connect API which initiates session
connection first. If session is already there with the peer
then it has to reuse it and initiate DLC (which will be done
in the subsequent patch) since there can be only one session
per device.
< ACL Data TX: Handle 256 flags 0x00 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Set Async Balance Mode (SABM) (0x2f)
Address: 0x03 cr 1 dlci 0x00
Control: 0x3f poll/final 1
Length: 0
FCS: 0x1c
> ACL Data RX: Handle 256 flags 0x02 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x03 cr 1 dlci 0x00
Control: 0x73 poll/final 1
Length: 0
FCS: 0xd7
Change-Id: I9828e0f3b3ea43bb17df95f0536e15df86f1b4be
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
'private' is a C++ reserved word and will lead to compilation errors:
C++ ble.o
In file included from ble.cpp:7:0:
include/bluetooth/bluetooth.h:284:10: error: expected unqualified-id before 'private'
uint8_t private[4];
Change-Id: I36aef5a84af4fc66e1c810bd0c56e5ab5f803294
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This replaces initiator flag of session and dlc to enum which has
two values INITIATOR and ACCEPTOR.
Also this defines macros for CRs in header. Basically there are
three types fo CRs. Frame header CR has different meaning for
UIH and non UIH packets. Also this renames the existing msg hdr
CR to make it consistent.
These changes are basically done to make it more readable
Change-Id: Ic15e93465b0afbd19d8805f27d7a43f34ef38689
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Even though this is level 0, NONE as a symbolic description is more in
line with the other level names.
Change-Id: Ic9d7c38b928d8744d47e759fae804bbbc08c89bf
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
So far bt_security_t has completely missed out on security level 0,
i.e. its actual values have been one lower than in the core
specification.
To properly introduce for the new level (which is only applicable for
BR/EDR) add proper tracking for each channel and server, and make the
channels inherit their required level from the respective server.
Change-Id: I9a2384d883017125c2c117880aa6e0ade30520e4
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This uses net_buf_simple_{save/restore} so the same buffer can be reused
if the buffer needs to be resent, also since the responses don't need to
be saved a pool with 1 element is enough while it keeps the code safe
from deadlocking when both request and responses use the same pool.
Change-Id: Ibaa8e7ef39f4b466d5cd4d55874bd609f0a1d67c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This header file is not intended for applications, rather than for
drivers, so move it to the appropriate place.
Change-Id: I7ff8158418e7e839b538c6cccbb32f3af43c12c6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The header was always supposed to be Apache 2 and not 3-Clause BSD.
Change-Id: I82f319edfc7a76323b2b409fadc90e270d7f1cad
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove "EDR" and "HS" postfixes from the version names, since
those are only relevant from a marketing point of view, and
not at all for HCI compatibility purposes.
Change-Id: Id8b4b010ed8b80dd63898c4baf85062e51b2635a
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Report the HCI version supported by the Controller as 4.2,
since it was set as 0 (1.0b) and this confused certain Host
implementations, such as BlueZ.
Change-Id: I809721ee9c2b55e77e6a3ca63688c802a9ffa0ba
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This change shortens the Service Class macro name from
BT_SDP_*_SVCLASS_ID to BT_SDP_*_SVCLASS
Change-Id: I1150baae24428c6b76f005d11003291016e0a03e
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This change adds SPP as a sample SDP service during RFCOMM
server registration. The SPP channel is now used as the
fixed channel for RFCOMM register command.
Change-Id: I3b5ad3995725adca55db1497d4a35099f6311f3b
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This change adds support for registering new service records.
Change-Id: I0ff2264d08787fe5f8edf6300259961c3ca52fbb
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Add Bluetooth protocol UUIDs to be used in SDP service records
Change-Id: I184cc114ff3fa172d9caa23d0b243a3191bb9773
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The keys BT_STORAGE_SLAVE_LTK, BT_STORAGE_LTK, BT_STORAGE_IRK allow to store
the distributed bonding keys for ble legacy pairing.
Change-Id: Iaee8b78456e9865a53a2f1228b6afa7ff44bc4db
Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com>
Added a OpCode definition that can be used to change the Page
timeout value.
Change-Id: I6ec06f6114f75665b161206ef3ebabbab193b04f
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
The list of remote devices for which we have information stored can be
retrieved using this key.
Change-Id: I1476c40177b631d6b2b4049623052245b25ed1b3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_storage_clear() function doesn't modify the data behind the
addr parameter, so the pointer should be decared const.
Change-Id: Icce676f9df80bac26ba4877bb63752559a43339f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Layers (modules) above HCI like L2CAP need to know status of applied
security procedure when it's triggered on existing connection. It gives
them possibility to make action in layer specific context on
post-security-procedure conditions.
Change-Id: Ia10078469847b29bb7eb3b1fb376ac305dd0b0fc
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Fix the following compiler warnings/errors that show up with llvm:
tests/bluetooth/shell/src/main.c:594:2: error:
initializing 'const uint8_t *' (aka 'const unsigned char *') with an
expression of type 'char [11]' converts between pointers to integer types
with different sign [-Werror,-Wpointer-sign]
BT_DATA(BT_DATA_NAME_COMPLETE, DEVICE_NAME, DEVICE_NAME_LEN),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/bluetooth/bluetooth.h:93:11: note: expanded
from macro 'BT_DATA'
.data = (_data), \
^~~~~~~
1 error generated.
net/bluetooth/hci_core.c:1759:22: error: passing
'uint8_t [248]' to parameter of type 'const char *' converts between
pointers to integer types with different sign [-Werror,-Wpointer-sign]
name_len = strlen(evt->name);
^~~~~~~~~
lib/libc/minimal/include/string.h:32:34: note: passing
argument to parameter 's' here
extern size_t strlen(const char *s);
^
CC net/bluetooth/log.o
net/bluetooth/hci_core.c:3136:10: error: passing
'uint8_t [248]' to parameter of type 'char *' converts between pointers to
integer types with different sign [-Werror,-Wpointer-sign]
strncpy(name_cp->local_name, CONFIG_BLUETOOTH_BREDR_NAME,
^~~~~~~~~~~~~~~~~~~
lib/libc/minimal/include/string.h:30:39: note: passing
argument to parameter 'd' here
extern char *strncpy(char *_Restrict d, const char *_Restrict s, size_t n);
net/bluetooth/conn.c:301:10: error: passing
'uint8_t [16]' to parameter of type 'char *' converts between pointers to
integer types with different sign [-Werror,-Wpointer-sign]
strncpy(cp->pin_code, pin, sizeof(cp->pin_code));
^~~~~~~~~~~~
lib/libc/minimal/include/string.h:30:39: note: passing
argument to parameter 'd' here
extern char *strncpy(char *_Restrict d, const char *_Restrict s, size_t n);
Change-Id: I342131c6c2b25445382b2317d673561c4087096b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
API Implemented Connect API. This can be used to establish A2DP connection.
Change-Id: I8cf714283a452c40b33fd46de442514a1341264c
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
The reference counting has been an internal trick to handle the TX
fiber, but it's not really needed since we can do the same thing with
the help of the state value.
Change-Id: I9cdaed9afb0b0c07e23d599637328cb863c123b3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
dlc will be destroyed when ref count reaches 0.
This also moves calling user disconnected callback to destroy
since disocnneted callback will be called whenever dlc is
destroyed regardless of dlc previously been in connected state
or not.
Change-Id: I4a13f8118704c59a88923b74e538063c0db11d77
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
