Enable CONFIG_NET_DHCPV4, while keeping static IP configuration,
which allows the app to work both with static IP (e.g. when
connected to a workstation without DHCP server) and with DHCP (e.g.
when connected to a router). When using DHCP, getting an address
may take some time, during which getaddrinfo() may fail due to a
timeout. So, add retries for this call.
Tested with qemu_x86 (non-DHCP) and frdm_k64f (both DHCP and
non-DHCP).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If coap-client(e.g. RPL BR) wants to get notifications from
coap-server(RPL-node) about parent status, client has to register
observer for notifications.
RPL node application modified to toggle the LED. Do not maintain any
ON/OFF states. Also removed Sparrow (contiki border router) related
patch.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add CoAP client to RPL BR application. Which can be used to
control leds and get rpl related information from leaf nodes
though CoAP messages. Build toplogy matrics and send it to
Web UI.
Enhanced Web UI components (Interfaces, RPL, Neighbors, Routes
and Topology tabs). Added buttons to control leds on lead nodes.
Added JSON support to handle led on/off requests from UI.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This is a very simple RPL border router sample application.
It provides HTTP(S) and net-shell interface for getting admin
information about neighbors and routes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
L2 could take advantage of such hardware capability, when supported by
the device. This is also required for OpenThread.
Fixes#5714
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Exclude usb_kw24d512 from wpanusb sample until the the sample
has been reworked and is more generic.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Enabling relevant hardware, currently only winc1500 on
quark_se_c1000_devboard. But it could be easily extended to other
drivers/boards.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the incoming packet fragments doesn't have any link layer
header then build_reply_pkt() will set reply packet fragment's link
layer header space to zero. Which is causing issue in case of IPv4.
ARP layer is trying to fill Ethernet headers, but fragments
ll header length is set to zero.
Just use net_pkt_copy_all() to copy payload. That should be enough.
Fixes#6564
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This is required to test the server with ab (ApacheBench), which
itself is an important integration test for the IP stack.
Fixes: #7377
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Using OMA Technical Specification LwM2M Enabler 1.0.2 dated
Feb. 9, 2018, let's mark the OPTIONAL resources for an LwM2M
Device object (Section E.4 "LwM2M Object: Device")
As a result, the Device object no longer configures the default
buffers for data storage of several optional resources.
The LwM2M client sample is also changed to to setup these read-only
buffers instead.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
In samples, using CHECK() helper macro, make it exist in case of
error. This makes sure that negative value (error indicator) can't
be passed as argument to other function and fixes Coverity reports.
Coverity-CID: 183062
Fixes: #6101
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The application started to send data before it had any IP
address configured. This prevents communication to the server.
Fixes#7502
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Due to higher traffic demands when using 6lowpan, we should raise
the default BT RX buffer counts and sizes.
This avoids the following error on some HW:
[net/buf] [WRN] net_buf_alloc_len_debug: bt_buf_get_rx():4985:
Pool 0x20009424 low on buffers.
[net/buf] [WRN] net_buf_alloc_len_debug: bt_buf_get_rx():4985:
Pool 0x20009424 blocked for 0 secs
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Make sure that we compile sanity checked application with
more config options in order to catch compile issues faster.
In this case DHCPv4 + debugging options are enabled for
sanity checker.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If DHCPv4 was enabled, then there was compile error as the code
was still using wrong variables.
Fixes#7342
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
NET_APP settings was missing the device name and enabling the net shell
is nice to verify runtime configuration as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The main stack size was too small for this sample application
when TLS was enabled. Increasing it to 1504 bytes.
Fixes#7269
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add hardware dependencies and filters to make sure we do not explode if
for example we try to build a sample/test using rtc when the platform
does not support that.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Payload dump function not adopted to multi fragments CoAP packet. Still
assumes whole payload exists in single packet. Also does not handle all
return cases of coap_packet_get_payload() function, which is causing
coverity failures.
Coverity-CID: 185277
Coverity-CID: 185278
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Update the LwM2M client sample documentation with usage examples
of the newly introduced overlay-*.conf fragments. Remove the
references to prj_dtls.conf.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
The file overlay-bt.conf contains only the needed CONFIG items to
support Bluetooth networking.
For example, DTLS-enabled BLENano2 HW can be supported with the
following build:
cmake -GNinja -DBOARD=nrf52_blenano2 \
-DCONF_FILE="prj.conf overlay-bt.conf overlay-dtls.conf" ..
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Instead of maintaining a nearly identical copy of prj.conf to support
DTLS, let's replace it with an overlay-dtls.conf file containing only
the CONFIG settings needed to support DTLS. This can be used via the
-DCONF_FILE command line argument when configuring the sample:
Non-DTLS-enabled build:
cmake -GNinja -DBOARD=qemu_x86 ..
DTLS-enabled build:
cmake -GNinja -DBOARD=qemu_x86 \
-DCONF_FILE="prj.conf overlay-dtls.conf" ..
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Rework samples using LED and GPIO to enforce use of "CONTROLLER"
as LED and PGIO postifx.
Change impact all samples that could be run by boards yet moved to
GPIO node generations, which is only STM32 for now
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In sample application of COAP there is no need of payload
for GET method & it is only applicable to put
and post methods are modified in coap-client.c
Signed-off-by: Tarun Kumar Agarwal <tarun.kumar.agarwal@intel.com>
- Added example OpenThread projects for KW41Z in echo/server samples
- Added projects to sample.yaml for sanity testing
Signed-off-by: David Leach <david.leach@nxp.com>
Assign special Product ID (0x101) to wpanusb protocol exporting
IEEE802.15.4 over USB.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
