Add the doxygen contents of heap listener which is missed.
We already have some apis of heap listener, but cannot be display
in our documents. So add the group to show in the doc.
Signed-off-by: Jian Kang <jianx.kang@intel.com>
Reduced logging mode selection to deferred, immediate, minimal and
frontend. Decoupled logging version from mode and created CONFIG_LOG1
which can be used to explicitly select deprecated version.
From now on, chosing CONFIG_LOG_MODE_{IMMEDIATE,DEFERRED} will result
in version2.
Deprecated CONFIG_LOG2_MODE_{IMMEDIATE,DEFERRED} with cmake warning.
Codebase adapted to those changes.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
- Fix some syntax errors, e.g. :c:kconfig:`...`
- Remove references to missing symbols (replaced with literals)
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Updates the documentation to remove references to asynchronous
pipe messages as they are no longer supported.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Rename a few CAN API functions for clarity and consistency with other
Zephyr RTOS APIs.
CAN_DEFINE_MSGQ() becomes CAN_MSGQ_DEFINE() to match K_MSGQ_DEFINE().
can_attach_isr() becomes can_add_rx_filter() since a filter callback
function is not an interrupt service routine (although it is called in
isr context). The word "attach" is replaced with "add" since filters are
added, not attached. This matches the terminology used is other Zephyr
APIs better.
can_detach() becomes can_remove_rx_filter() to pair with
can_add_rx_filter().
can_attach_msgq() becomes can_add_rx_filter_msgq() and documentation is
updated to mention its relationship with can_add_rx_filter().
can_register_state_change_isr() becomes can_set_state_change_callback()
since a state change callback function is not an interrupt service
routine (although it is called in isr context). The word "register" is
replaced with "set" since only one state change callback can be in
place.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The document is now structured into the three different APIs. In
addition to that, a section for relevant Kconfig options is added.
Signed-off-by: Martin Jäger <martin@libre.solar>
Update the API overview documentation to note that the CAN API was
changed in the upcoming Zephyr v3.0 release.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change the can_tx_callback_t function signature to use an "int" (not an
uint32_t) for representing transmission errors.
The "error" callback function parameter is functionally equivalent to
the return value from can_send() and thus needs to use the same data
type and needs to be able to hold negative errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Update the system drivers section: remove references to
SYS_DEVICE_DEFINE, add references to the SYS_INIT() macro.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Added note for clarification on setting limitation
for secure/non-secure domains isolation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Deprecate the can_attach_workq() API call.
This API is limited in its functionality (it does not work with
userspace, it uses one common buffer size for all work queue instances).
Similar functionality can easily be implemented using the
can_attach_msgq() API along with the generic triggered work API
(e.g. using k_work_poll_submit()).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This provides the infrastructure to create network packet filter rules
and to apply them to the RX and TX packet paths. Rules are made of
simple condition tests that can be linked together, creating a facility
similarly to the Linux iptables functionality.
A couple of generic and Ethernet-specific condition tests are also
provided.
Additional tests can be easily created on top of this.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The Zephyr API grouping can be a bit difficult to maneuver. Ease this up
a bit by expanding the table of contents to contain two levels of
titles.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Reword a few of the reference documentation titles to better fit in with
the rest.
Do not use all-caps MODBUS for title.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Promote the Controller Area Network (CAN) subsystem reference
documentation from being part of the networking subsystem documentation
to having its own section.
The networking subsystem primarily deals with IP-based networking,
whereas CAN is a subsystem of its own.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Many documents relied on single quotes to create references, e.g.
`my_reference`. This is possible because `default_role = "any"` is
enabled in Sphinx conf.py. However, this method comes with its problems:
- It mixes all domains together, so it's not clear to what are you
referencing: a document? a Kconfig option? a C function?...
- It creates inconsistencies: in some places explicit roles are used
(e.g. :ref:`my_page`) while in some others not.
- _Conflictis_ with markdown. Single quotes are used for literals in
Markdown, so people tend to use the same syntax in Sphinx, even though
it has a different purpose.
Usages have been found using `git grep ' `[^`]*` ' -- **/*.rst`.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Deprecate the use of CAN-specific error return values and replace them
with standard errno values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
A user may want to control message parameters (for example, delay
parameter) on every retransmission of a published message (for example,
see section 1.4.1 of the mesh model specification). This is essential
for lighting messages as time gap between messages retransmitted via
the publish-retransmit mechanism introduces unwanted jitter/pop-corn
when such retransmissions are received by a large 'group' of lights.
This commit adds an option to `struct bt_mesh_model_pub` to make the
access layer call `bt_mesh_model_pub.update` callback on every
retransmission. This also addes few macros and functions that can be
used for further calculations.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
After removing the "type" and "dval" members, the documenation still
referred to these fields. This commit removes the paragraph
about checking the type of values returned from sensor.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
Since there are no more users and dependencies of
Kconfig option USB_UART_CONSOLE in the tree,
remove the remains and the option USB_UART_CONSOLE.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
By redefining `atomic_t` as `long`, the type is 32-bit on
32-bit architectures and 64-bit on 64-bit architectures.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
The PM documentation does not provide any details on usage of
SYS_DEVICE_DEFINE, so remove the reference.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Include all API groups (some where missing) and move to pm folder
instead of power_management for consistency.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Splitted the PM reference document into smaller chunks (overview,
system, device and device_runtime). Moved this content to the guides
section, since the documentation intent is to provide general PM subsys
information and usage guidelines.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Glossary is a place where all terms can be defined, so move them there.
Some terms have been slightly adjusted and SOC interface remove since it
was not much relevant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This adds the macro public API to handle the DT ranges properties.
This also updates the devicetree/api.rst documentation.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
A space between :ref: and the actual reference prevented the reference
to be rendered correctly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This change adds `k_cycle_get_64()` on platforms that
support a 64-bit cycle counter.
The interface functions `arch_k_cycle_get_64()` and
`sys_clock_cycle_get_64()` are also introduced.
Fixes#39934
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
The mesh shell module owns the composition data for the shell
application, which makes it impossible to use it outside of the
application itself. To support the shell as a generic debugging
component that can be added to any application, we have moved the
composition data out of shell.c, and into the application.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Rename the Zephyr chosen property for specifying the default CAN bus
controller from "zephyr,can-primary" to "zephyr,canbus".
The "zephyr,can-primary" property name was selected in antipation of
adding support for redundant CAN networks, which we have yet to
add. Meanwhile, the "primary" term causes confusion for non-redundant
CAN bus configurations (and the "can" term doesn't match the name of the
Zephyr CAN bus subsystem).
The CAN in Automation (CiA) 302-6, which deals with CANopen network
redundancy, uses the terms "default interface" and "redundant
interface". If/when we add support for redundant CAN networks, the
"zephyr,canbus" chosen property can be supplemented with a
"zephyr,canbus-redundant" chosen property.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
As the already existing macro K_MEM_SLAB_DEFINE results in
two variable definitions, the preceding static modifier leads to
a seemingly working solution, though linkage conflicts will occur
when the same memory slab name is used across multiple modules.
The new K_MEM_SLAB_DEFINE_STATIC macro duplicates the functionality of
K_MEM_SLAB_DEFINE with the difference that the static keywords are
internally prepended before both variable definitions.
The implementation has been tested on my Zephyr project (the build
issue faded out). The documentation has been updated altogether
with all incorrect occurences of static K_MEM_SLAB_DEFINE.
Signed-off-by: Pavel Hübner <pavel.hubner@hardwario.com>
- Add a new `subsys_pm` group, part of `subsys`
- Improve group naming
- Include conditional code using __DOXYGEN__, it allows to have better
control of inclusion.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
