rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Only confirmable messages need pending tracking. Non-confirmable
messages are released after sending.
Match incoming packets with token, not message ID.
Ignore responses with non-matching tokens.
Remove unused function send_reset().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
In case observation token changes (the LwM2M server re-sends
observation request to the client), the LwM2M engine should cancel any
ongoing notifications based on the old token. Otherwise, it will be
impossible to match the pending notification reply (ACK) with the
observer context anymore, causing new notifications for this
observation to stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The compiler emits a "null where non-null expected" warning unless the
argument of strlen is non-null at compile time.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The "encryption only" security level was deprecated in IEEE
802.15.4-2015. This deprecation has already been introduced in the code
but was overlooked in net config.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The current zperf tcp/udp download command doesn't provide the option
to bind the server to a specific host address. If there is more than
one interface, it will not be possible to test each interface with zperf
tcp/udp download command without building the Zpehyr.
This patch will add support for zperf tcp/udp download command to bind
server to host interface address.
Signed-off-by: Rahul Singh <rahul.singh@arm.com>
Added a new event for LWM2M_RD_CLIENT_EVENT_DEREGISTER for
indicate LwM2M client dereistartion.
Updated unit test and sample for new event type
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
This adds a function k_object_is_valid() to check if a kernel
object exists, of certain type, and has been initialized.
This replaces the same (or very similar) code that has been
copied from kernel into the network subsystem.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix bug in timeout_expired() function. Coap client was resending
pending messages after 500 ms (COAP_PERIODIC_TIMEOUT) and didn't
wait for retransmission timeout.
Use 64-bit k_uptime_get()
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
If an IPv4 address is requested on an IPv6 interface or vice versa
use a sane default fallback address to send the response.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The zperf shell sends a IPv6 ping at the start when working
with IPv6. Convert the sending of the ping to use the new API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add DHCPv6 support to the net config library. In case DHCPv6 is enabled,
net config will attempt to acquire IPv6 address and/or prefix when used.
The user can select with Kconfig whether to request address or prefix
(or both).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Code using sys_csrand_get should depend on CONFIG_CSPRNG_ENABLED symbol
and not in ENTROPY_HAS_DRIVER since they are not using the entropy
device directly.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Previously each piece of LwM2M SEND was
using token length of zero. I think this was unintentional.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
To protect the integrity of outgoing block-wise transfers, append
Etag option that allows client to see if the received block is
generated from same content as it is expecting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow blockwise-send buffers to be used with GET and FETCH
queries as well.
When outgoing packet is split into multiple blocks, don't free
it when first block is send. Keep it in memory until some other requests
come.
Following queries to next block are matched using CoAP token.
However, this required Leshan to use COAP.BLOCKWISE_REUSE_TOKEN=true
option from Californium.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
lwm2m_udp_receive() is only called with same function
pointer, so there no need to carry that in the parameter.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In reality, single-write is the only operation that handles
BLOCK1 operations when receiving paylod.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Partial content format support is required to have a proper support
for content format OPAQUE instead of threading it as a part of
plain text format.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Move commands that require parameters first into the list.
Move syntax line first, command documentation second,
flags last. This is much like Unix commands do
❯ /bin/ls --help
Usage: /bin/ls [OPTION]... [FILE]...
List information about the FILEs (the current directory by default).
Compared to:
uart:~$ lwm2m
lwm2m - LwM2M commands
Subcommands:
read :read PATH [OPTIONS]
Read value from LwM2M resource
-x Read value as hex stream (default)
-s Read value as string
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In spec:
The LwM2M Client MUST reject any LwM2M Server operation on
the Security Object (ID: 0) with an "4.01 Unauthorized" response
code.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
With bootstrap one function is unused. Fix by changing
ifdef to if (IS_ENABLED()) so linker can drop it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This commits adds support for the SO_REUSEPORT socket option.
The implementation follows the behavior of BSD and tries to also follow
the specific additional features of linux with the following
limitations:
* SO_REUSEADDR and SO_REUSEPORT are not "the same" for client sockets,
as we do not have a trivial way so identify a socket as "client"
during binding. To get the Linux behavior, one has to use SO_REUSEPORT
with Zephyr
* No prevention of "port hijacking"
* No support for the load balancing stuff for incoming
packets/connections
There is also a new Kconfig option to control this feature, which is
enabled by default if TCP or UDP is enabled.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
This commit adds support for the SO_REUSEADDR option to be enabled for
a socket using setsockopt(). With this option, it is possible to bind
multiple sockets to the same local IP address / port combination, when
one of the IP address is unspecified (ANY_ADDR).
The implementation strictly follows the BSD implementation and tries to
follow the Linux implementation as close as possible. However, there is
one limitation: for client sockets, the Linux implementation of
SO_REUSEADDR behaves exactly like the one for SO_REUSEPORT and enables
multiple sockets to have exactly the same specific IP address / port
combination. This behavior is not possible with this implementation, as
there is no trivial way to identify a socket to be a client socket
during the bind() call. For this behavior, one has to use the
SO_REUSEPORT option in Zephyr.
There is also a new Kconfig to control this feature similar to other
socket options: CONFIG_NET_CONTEXT_REUSEADDR. This option is enabled by
default if TCP or UDP are enabled. However, it can still be disabled
explicitly.
Signed-off-by: Tobias Frauenschläger <t.frauenschlaeger@me.com>
Allow Bootstrap server to close the DTLS connection immediately
after receiving Ack to Bootstrap-Finish command.
This is not an error as either parties are allowed to tear down
the connection.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Allow certain RD-client states to timeout.
As stated in LwM2M specification:
The bootstrap procedure failed when the LwM2M Client did not
receive the "Bootstrap-Finish" operation after the
EXCHANGE_LIFETIME time period expired.
The EXCHANGE_LIFETIME parameter is defined in RFC 7252
We must handle the case where Bootstrap server is not sending
information towards us.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When publish buffer run out, no thread active process work.
Fix this, by reschedule process work.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
Current MQTT-SN topic and publish allocators are not thread safe.
Fix this, by using k_mem_slab instead of arrays.
Signed-off-by: Weiwei Guo <guoweiwei@syriusrobotics.com>
Releasing the lock before notifying condvar led to a race condition
between a thread calling k_condvar_wait to wait for a condition variable
and another thread signalling for this same condition variable. This
resulted in the waiting thread to stay pending and the handle to it
getting removed from the notifyq, meaning it couldn't get woken up
again.
Signed-off-by: Ambroise Vincent <ambroise.vincent@arm.com>
In low memory conditions, its possible for socketpair memory allocation
to fail and then the socketpair is freed but after that the remote
semaphore is released causing a crash.
Fix this by freeing the socketpair after releasing the semaphore. Add a
test case to induce low memory conditions (low HEAP and high socketpair
buffer size), with the fix issue is not seen.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The errors are printed in hex, but no prefix was used. This could be
confused with usual errno return values. The 0x prefix makes clear
that it's a hex value.
Also a missing minus sign is added to one log message.
Signed-off-by: Martin Jäger <martin@libre.solar>
This is handy in testing of setting priority directly rather than
deriving from DSCP. Please note ICMP doesn't use net context.
This is applicable for both shell and API.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add a network configuration option to configure whether IEEE 802.15.4
packets are expected to be ACKed or not.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
In the IEEE 802.15.4 area certain settings must be set before
net_if_up() may be called (e.g. the channel).
Also net_if_up() may not be called if
CONFIG_IEEE802154_NET_IF_NO_AUTO_START=y.
This fixes the set-up order and handling of
CONFIG_IEEE802154_NET_IF_NO_AUTO_START.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Modify the signature of the k_mem_slab_free() function with a new one,
replacing the old void **mem with void *mem as a parameter.
The following function:
void k_mem_slab_free(struct k_mem_slab *slab, void **mem);
has the wrong signature. mem is only used as a regular pointer, so there
is no need to use a double-pointer. The correct signature should be:
void k_mem_slab_free(struct k_mem_slab *slab, void *mem);
The issue with the current signature, although functional, is that it is
extremely confusing. I myself, a veteran Zephyr developer, was confused
by this parameter when looking at it recently.
All in-tree uses of the function have been adapted.
Fixes#61888.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Make sure we use the network interface name (if configured)
instead of device name when binding to certain network
interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add TLS_DTLS_CID socket option, which enables to use the Connection ID
extension for the DTLS session.
The option provides control of the use of CID with the `setsockopt()`
function. The value provided can disable, enable, and control whether to
provide a CID to the peer. It uses a random self CID (if told to provide
one to the peer) unless TLS_DTLS_CID_VALUE set previously.
Add TLS_DTLS_CID_VALUE to get or set the CID sent to the peer, if any.
Add TLS_DTLS_PEER_CID_VALUE to get the CID value provided by the peer,
if any.
Add TLS_DTLS_CID_STATUS to determine if CID used, and whether
bidirectional or one way.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
getsockname() did not work properly on bound sockets, as it verified
whether the socket has an active connection before retuning result. This
is not correct, as socket after bound may not have a connection yet.
Fix this, by verifying that local_addr on an underlying net_context is
set, to determine whether socket has a local address assigned, before
returning result.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
* Renamed 'coap_client_init_path_options' to
'coap_packet_set_path'
* Moved into 'coap.c'
* The function is public now
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
Fix options initialization for path and query
when a final segment is one character long.
For example, "a/b" inits path as ["a"] instead
of expected ["a", "b"]. The same applies to
query option. The "a/abc?a&b" options won't
contain "b".
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
The previous patch to address race condition on STREAM sockets had a
side effect on DGRAM socket, where net_context_recv() is not only
installing recv callback, but also registering a connection at net_conn
level. Doing so before setting remote address first (which is done in
net_context_connect()) had an impact on the connected DGRAM socket
operation, which now accepted packets from any remote peer, and not only
the one socket was connected to.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When resource data length is set to zero, we still need to
ensure that string reading will return an empty string.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
