irq_line and irq_enabled call is not necessary as the interrupt
allocater enables it during its initialization.
it also adds end packet to all write transmission instead
of only at the end (burst data scenario)
Add check in gpio configuration check to avoid wrong gpio pins
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Adds the ability for I2C drivers to report synchronous transfer stats
using a I2C specific macro to define the device instance.
The macro creates a container for device_state which allows for per
instance device class common data structure to be used in the device
class api (ex: i2c.h). This is used to maintain per driver instance
stats for all i2c drivers. This is a reusable idea across other device
classes as desired.
Using Kconfig device class stats may be turned on/off individually
this way as well, in this case I2C_STATS.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
- added messages check and fix before transfer
- fixed START and STOP signal generation conditions
- fixed semaphore release for empty messages
Signed-off-by: Konrad Sikorski <znfgnu@gmail.com>
The device PM subsystem _depends_ on device, not vice-versa. Devices
only hold a reference to struct pm_device now, and initialize this
reference with the value provided in Z_DEVICE_DEFINE. This requirement
can be solved with a forward struct declaration, meaning there is no
need to include device PM headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Port some drivers to the recently introduced macros to showcase its
usage and be able to do some initial testing (nRF52840).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use i2c_hal functions to enable support for
multiple SoCs.
Use DT compat to enable I2C from device
tree configuration
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The PM callback is no longer referenced as "pm_control" but
"pm_action_cb", so reflect this new naming on the callbacks.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add get_config function to I2C emulator.
Also update tests using I2C emulator to use i2c_get_config.
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
Add get_config function to NPCX I2C driver. The master mode is hardcoded
and get the speed from a controller.
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
Some applications need to get the current I2C configuration. Add a
proper callback to I2C API under Kconfig option not to change
applications that don't need this feature.
Signed-off-by: Dawid Niedzwiecki <dn@semihalf.com>
Both nRF I2C drivers (i2c_nrfx_twi and i2c_nrfx_twim) perform the bus
recovery procedure in reaction to timeout (500 ms) of any requested
message transfer. Add implementation of the I2C API recovery function
in both these drivers so that it is also possible to execute this
procedure directly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Replaces the prefixes of gpio_matrix_in and gpio_matrix_out
to unify those function calls on all supported socs.
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Fixes: #38959
Currently, the I2C driver returns I2C status register value as error
code when error happen. This PR fixes returning system number and
the return values is negative for error.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Update sam0 i2c driver to directly send/receive next message if it is
in the same direction and the current message has no stop or restart
flags. Seems like in some drivers this is the expected behaviour.
Fixes#36857
Signed-off-by: Christoffer Zakrisson <rustypig91@gmail.com>
TWIM peripherals cannot perform write transactions from buffers
located in flash. The content of such buffers needs to be copied
to RAM before the actual transfer can be requested.
This commits adds a new property (zephyr,flash-buf-max-size) that
informs the driver how much space in RAM needs to be reserved for
such copying and adds proper handling of buffers located in flash.
This fixes an issue that caused that e.g. the DPS310 sensor driver
did not work on nRF SoCs that only have TWIM, not TWI peripherals.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Issue an error logging message when the i2c_nrfx_twim driver lacks
a concatenation buffer big enough to properly handle a call to
i2c_burst_write() function, to give the user a hint what is wrong.
Also use by default a 16-bytes long concatenation buffer for every
instance of the i2c_nrfx_twim driver. Such value should cover most
of the simple uses of the i2c_burst_write() function, like those
in the stmemsc sensor drivers, and when a longer buffer is needed,
the user will be provided with the above message pointing to the
property that should be adjusted.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Microchip MEC172x series I2C driver implementing controller
and target modes. The driver implemenents its own I2C port
pin control functions and does not depended upon pinmux. Future
updates will make use of PINCTRL when that subystem is finalized.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
So far pcie_get_mbar() has been the only way to retrieve a MBAR. But
it's logic does not fit all uses cases as we will see further.
The meaning of its parameter "index" is not about BAR index but about
a valid Base Address count instead. It's an arbitrary way to index
MBARs unrelated to the actual BAR index.
While this has proven to be just the function we needed so far, this has
not been the case for MSI-X, which one (through BIR info) needs to
access the BAR by their actual index. Same as ivshmem in fact, though
that one did not generate any bug since it never has IO BARs nor 64bits
BARs (so far?).
So:
- renaming existing pcie_get_mbar() to pcie_probe_mbar(), which is a
more relevant name as it indeed probes the BARs to find the nth valid
one.
- Introducing a new pcie_get_mbar() which this time really asks for the
BAR index.
- Applying the change where relevant. So all use pcie_probe_mbar() now
but MSI-X and ivshmem.
Fixes#37444
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The original NIOS-II developer and former vendor is Altera, which is
now part of Intel. Let's not add a new vendor prefix for something
that already exists and has been acquired; move it to use the existing
'altr,' prefix instead.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This PR will change accessing the related pinctrl macro from soc_dt.h
And the pinctrl of SCL and SDA were got from pinctrl-0 and pinctrl-1,
respectively. Change it to get from pinctrl-0 only.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This changes the build command so the I2C EEPROM slave
is being grouped into the I2C static library.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The driver only support use case where the channels are used in mutual
exclusion.
Origin: Original
Signed-off-by: Guillaume Lager <g.lager@innoseis.com>
Instead of passing target states, use actions for device PM control.
Actions represent better the meaning of the callback argument.
Furthermore, they are more future proof as they can be suitable for
other PM actions that have no direct mapping to a state. If we compare
with Linux, we could have a multi-stage suspend/resume. Such scenario
would not have a good mapping when using target states.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
According to the documentation the OFF state has to be used when the
devices is fully turned off, ie, power removed. Most drivers were using
a sort of fall-through for all non-active states, leading to behaviors
not following the specifications.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Return -ENOTSUP if the requested state is not supported
- Remove redundant "noop style" functions.
- Use switch everywhere to handle requested state (not necessary in all
drivers, but better take off with consistency in place after current
changes).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The verb tense for the suspended state was not consistent with other
states. The likely reason: state was being used as a command/action.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The difference between low power and suspend states is a thin blur line
that is is not clear and most drivers have used indistinctly. This patch
converges to the usage of the suspend state for low power, since
contrary to the low power state, it is used by both system and runtime
device PM. The low power state is still kept, but its future is unclear
and needs some discussion.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM control function will only be called if the requested
state is different from the current one. A significant amount of drivers
were checking for state changes, now unnecessary. This patch removes all
this redundant logic.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the state is no longer modified by the device PM callback, just
use the state value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is now invoked to set the device PM state in all cases, so
the usage of ctrl_command is redundant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM subsystem already holds the device state, so there is no
need to keep duplicates inside the device. The pm_device_state_get has
been refactored to just return the device state. Note that this is still
not safe, but the same applied to the previous implementation. This
problem will be addressed later.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The following device busy APIs:
- device_busy_set()
- device_busy_clear()
- device_busy_check()
- device_any_busy_check()
were used for device PM, so they have been moved to the pm subsystem.
This means they are now prefixed with `pm_` and are defined in
`pm/device.h`.
If device PM is not enabled dummy functions are now provided that do
nothing or return `-ENOSYS`, meaning that the functionality is not
available.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The irq will be enabled at the condition of start or repeat
start of I2C. If timeout occurs without being wake up during
suspend(ex: interrupt is not fired), the irq should be
disabled immediately.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
In certain build cases we get the following compiler warning:
i2c_rcar.c: In function 'i2c_rcar_transfer_msg':
i2c_rcar.c:168:6: warning: 'ret' may be used uninitialized in
this function [-Wmaybe-uninitialized]
Fix this by initializing ret to 0 at start of function.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Current impĺementation fails due to missing stop bit
when reading data. This fixes it and refactor the implementation
by adding k_busy_wait when waiting I2C bus completion.
Also, this implementation is based on esp-idf v3.0.
It will be refactored based on latest esp-idf v4.3 using proper
low level calls.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Fixes#34015
This patch add support for I2C on the Renesas R-Car.
This I2C hardware block can be found on various Renesas R-Car
SoC series.
It allows to perfom read and write on I2C buses in an
interrupt based way on R-Car Gen3 H3ULCB board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Use GPIO output high and low to simulate I2C start and stop
conditions to restore i2c to normal.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Create the pinmux phandle to the I2C driver node in the
devicetree. When the pinmux_pin_set function in
i2c_it8xxx2_init can refer to the setting of this phandle.
It is more flexible to use.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
