Constify the config and reorder the data fields for better packing.
This reduces the RAM usage of `mipi_dbi_spi` by 20 bytes.
Signed-off-by: Michael Hope <mlhx@google.com>
Adds support for setting the number of conversion results that are
collected and averaged before updating the temperature register.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
Perform the modulo operation on `bitpos` before using it. This should
make code slightly more clear.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Both $ra and $t2 are caller-saved registers and may be modified in ISR
callback. Save $ra to stack to follow the calling convention.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Add a zephyr/printk.h header for the __printk_hook functions, these are
currently manually declared by all console drivers for no good reason.
Move the documentation into the header and also unify the way that
console drivers call the function.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Return to sensor_api i/f the temperature in Celsius instead
of the register raw value in LSB.
Fixes#75686
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The current implementation assumes that sensor odr and range are
always configured in the Device Tree at compile time which might
not be the case.
Instead, application can set odr and range either at compile time
through the DT or using SENSOR_ATTR_SAMPLING_FREQUENCY and
SENSOR_ATTR_FULL_SCALE attributes at runtime, so each driver instance
must keep trace of the latest values set and use them in the sensor
APIs which require them (e.g. lis2dux12_mode_set).
Signed-off-by: Armando Visconti <armando.visconti@st.com>
When setting the full scale through SENSOR_ATTR_FULL_SCALE the
driver must convert the g value (i.e. one of 2g/4g/8g/16g) to
the corrispondent sensor fs raw value.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
RISC-V trap entry is handled in soc/common/riscv-privileged/vector.S.
Remove the redundant modification in CLIC driver.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
CLIC should be the first level interrupt controller because it replaces
the basic RISC-V local interrupt.
The interrupt level in CLIC controls preemption between IRQs, rather than
specifying the number of nested interrupt controllers.
Removed CONFIG_MULTI_LEVEL_INTERRUPTS and the incorrect interrupt level.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
A patch was added to the voltage divider to handle an erroneous
negative voltage reading for the nrfx_saadc which could return
negative voltages even though the ADC mode was single ended.
This has now been patched in the ADC driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The NRF SAADC produces negative values in single ended mode if the
positive input is below 0V (ground). This behavior does not match
the ADC device driver API, which states that in single ended mode,
the readings must be positive [0 .. 2^resolution - 1].
This commit extends the adc_nrfx_saadc device driver to track which
channels in a sequence are configured to be single ended, to then
corrects negative readings for these channels to 0.
This patch only works if the ADC resolution is lower than the sample
bit size. This is the case for 8, 10, 12 and 14 bit resolutions for
the nRF 52, 53 and 91 series which store readings in a int16_t.
The nRF 54H and 54L series store 8-bit resolution readings in a 8-bit
sample size. A check has been added to start_read() to prevent single
ended mode readings if the resolution is 8-bit for these platforms.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The DPSRAM ports can run at different clocks, this is the default
configuration, follow the advice in the datasheet and wait 3 nop
instructions before setting the AVAILABLE bit.
It can be observed that when the controller is continuously sending data
to the host, it rarely has a 0-byte transaction instead of a short
packet. The reason for this is not easy to find, it also seems to depend
on the runtime of individual components. This may fix the problem, but
there is no sure proof that this is the solution.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This patch adds support for the rx-invert and tx-invert device-tree
properties to the uart_lpc11u6x driver for USARTs 1, 2, 3 and 4.
Note that this feature is not supported by USART 0.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
remove litex,sys-clock-frequency from litex,clk,
because we already define that in the clock-frequency of cpu0.
This can be accessed via
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
PR #63973 namespaced generated headers with zephyr/, including generated
syscall headers.
Since then, some new generated syscall header includes have been added
without the zephyr/ prefix, breaking builds when
CONFIG_LEGACY_GENERATED_INCLUDE_PATH is disabled.
This commit adds the zephyr/ prefix to includes for generated syscall
headers where it has been missed.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
ESP32-S2 Wi-Fi clock is not initialized properly, causing
instability when scanning or connecting to a SSID.
Fixes#74899Fixes#74417
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The 14/12-bit variants (AD5692R/AD5691R) require the data to be in the
upper bits of the two byte data field of the write command. See table 12
and the associated footnotes in the AD5693R/AD5692R/AD5691R/AD5693
datasheet.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Fix a build error when CONFIG_SPI_ASYNC is set.
The issue was detected by CI
```
spi_xlnx_axi_quadspi.c: In function 'xlnx_quadspi_isr':
spi_xlnx_axi_quadspi.c:489:21: error: 'ctx' undeclared
489 | if (ctx->asynchronous) {
| ^~~
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix the busy wait in the MDIO driver that was causing timing
problems in systems with real time requirements performing tasks
more frequently than about a millisecond.
Restructure the code to be less redundant and change the busy wait
kconfig to microseconds instead of millliseconds. Also actually signal
to the mdio driver that it can use the interrupt instead of busy
waiting, this seems to have been forgotten.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Set the remote address of received sockets.
This is necessary for services that rely on the remote address.
DNS relies on the remote address to be set properly.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
The CMSDK watchdog hardware only supports a single timeout channel.
Return the documented error if more than one timeout is requested to be
installed.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The previous calculation was multiplying the timeout in milliseconds
by the clock frequency, giving a cycle count 1000x larger than it should
be.
Fix the calculation and rename `reload_s` to `reload_cycles`, as the
cycle count is what this actually contains.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The intention here appears to be to return an error. Use an early return
to implement this.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Remove the reset vector setting from driver layer,
the reset vector is more suitable to be set at the board layer.
Signed-off-by: Kevin Wang <kevinwang821020@google.com>
In order to decouple the read request from its implementation, we need
to be able to yield to potential lower-priority threads, which is not
possible with k_yield() itself. As such, using RTIO Consume semaphore
enables us to achieve this.
This patch also refactors blocking API (sensor_read) to also block upon
consumption, so as not to require RTIO_SUBMIT_SEM enabled.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
- enabled GPT(PWM) peripheral for sleep/deepsleep mode in init_pwm()
- Fixed: undefined behaviour when using k_sleep()
Signed-off-by: Devansh Tanna <devansht0210@gmail.com>
c8d8dce755 introduced a regression whereby driver config should hold
module device pointer, except it didn't.
This commit adds module_dev to the driver config.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
When multiple devices are on the bus, and no slave matches
the sent rom, the master receives only ones.
This should be handled explicitly and the error reporting
should not rely on the crc mismatch of the scratchpad.
Note: Make sure that the sensor configuration is loaded to the
eeprom (copy scratchpad), otherwise the resolution will not match
the expectations in case a node looses power and recovers.
As in that case the configuration will not be applied again.
Also the sensor may still report the power on reset value
of +85°C just after the sensor powered up.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
After each read of the scratchpad the crc of the data
is checked and in case of a mismatch an error is returned.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
- Move the content of the header file into the source file,
and drop unnecessary includes.
- Also, drop the bus access function.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
