Set maximum window value as a test variable.
This allows to set a much shorter value that is compatible with
use in stm32 window watchdog.
Additionally, tweak test configuration so that it is applied on
compatible base (when available).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In npcx7 series, the Timer and Watchdog module (TWD) generates the
clocks and interrupts used for timing periodic functions in the system.
It also provides watchdog reset signal generation in response to a
failure detection.
The CL also includes:
— Add npcx watchdog device tree declarations.
— Zephyr watchdog api implementation.
— Add Watchdog definitions for npcx7 series in
tests/drivers/watchdog/wdt_basic_api/src/test_wdt.c for
supporting test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
STM32H7 and STM32F7 guarantee last write RAM retention over reset,
only for 64bits.
See details in Application Note AN5342
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Not all watchdog devices support a warning callback before reset. If
the driver refuses to accept that configuration record the test as
having passed.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move to the new devicetree API and stop using DT_WDT_0_NAME fixup
macros. All existing in-tree SoCs with fixup names are still supported
here via compatible. The watchdog0 alias is also still supported.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Replace CONFIG_WDT_0_NAME with DT_ALIAS_WATCHDOG_0_LABEL in samples and
test code. Now that all drivers are DT aware we don't ever set the
Kconfig option.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
After the window watchdog introduction, the boards that support it over
independent watchdog fail to pass this test. This patch adds specific
tests for the nucleo_{f401re, l496zg} boards supporting WWDG.
Signed-off-by: Ioannis Konstantelias <ikonstadel@gmail.com>
move watchdog.h to drivers/watchdog.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The original code cannot go to the next step on those boards enabled
TEST_WDT_CALLBACK_2 macro, because of the flow control issue. So the
test function cannot finish, and the board keeps restart. As a result,
failure on the test.
Fixes#13468
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
STM32 watchdog driver does not support callback which is not expected
by the test. Update to make test able to run on STM32 drivers.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
test application of watchdog assumes that the variable
created in noinit section will have initial value as
zero. This is an incorrect assumption as variable
in noinit section can have any value. The application
is modified work even if variable in noint section
have any value.
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
New testcase sets max value to zero and checks if install function
fails.
Improvement introduces k_yield and k_sleep in while loops to make zephyr
responding.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Makes the dual timeout test conditional upon the nrfx watchdog driver
because not all watchdogs can support multiple timeouts.
Test now passes on frdm_k64f, hexiwear_k64, and usb_kw24d512 boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
New test checks watchdog API if the simpliest test cases work
correctly. Each test contains description at the begining of the
source file.
This implementation replace old SoC-centric implementation.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Instead of completely excluding those tests, mark them as skipped and
provide an noop function that marks the test as skipped where test is
not supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I6c676bc6c5e850a8725785554cd535e32067f33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
ztest has a number of assert style macros and used a baseline assert()
that varies from the system definition of assert() so lets rename
everything as zassert to be clear.
Change-Id: I7f176b3bae94d1045054d665be8b5bda947e5bb0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order for interrupt reset mode to work (reset the processor
after and interrupt) the interrupt does not has to be cleared,
and the qmsi hal layer clears the interrupt after the callback
has been invoked, the callback does not return and the processor
should reset.
Jira: ZEP-1566
Change-Id: Ic951a0f15fe95fb0ef5d752b831c62e6fa3ceea0
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The commit cover Interrupt Reset mode and Reset mode by 2 test cases.
They can't be tested in one shot, but need test separately.
api converage:
wdt_enable()
wdt_disable()
wdt_set_config()
wdt_get_config()
Change-Id: I44b20cfe97d860e8b25b2cab76f9d9398cfd8e69
Signed-off-by: jing wang <jing.j.wang@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
