This commit provides the necessary overlay to make the test pass
on the QuickFeather hardware.
Signed-off-by: Jan Kowalewski <jkowalewski@antmicro.com>
This adds support for emmulated GPIO (CONFIG_GPIO_EMUL=y) and
additionally allows BOARD=native_posix and
BOARD=native_posix_64 to run the gpio_basic_api test suite.
Fixes#26477
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add gpio support for Nuvoton NPCX series. This CL includes:
1. Add GPIO device tree declarations.
2. Introduce wui_maps property in yaml file to present relationship
between Wake-Up
Input (WUI) and 8 IOs belong to the device.
3. Zephyr GPIO api implementation.
4. GPIO callback functions implementation with MIWU api functions.
5. Overlay file for gpio basic tests
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
GPIO 050/051 are being used for tachometer sensor as
CONFIG_TACH_XEC is enabled by default. So for the gpio_basic_api
test, another set of GPIOs are needed. GPIO 156/157 are chosen
as they are (more or less) dedicated for two LEDs on board and
not being used for other functions (pinmux-wise).
Fixes#25272
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Convert driver to use the new device tree macro's instead of
dts_fixup.h based macros. This moves us closer to removing both
dts_fixup.h and per instance Kconfig symbols.
The pinmux_mchp_xec is also being updated since it's using DT
from GPIO.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
No in-tree boards support the NINT signal on an SX1509B IO extender,
so test using custom overlays/configurations for the Particle Xenon
board using an SX1509B breakout board.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Changes to Kconfig vs devicetree resulted in uart1 being enabled,
which steals the test pins away from the test.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The board name for the Thingy:52, so far known as nrf52_pca20020, is
renamed to thingy52_nrf52832. Its documentation and all references to
its name in the tree are updated accordingly. Overlay and configuration
files specific to this board are also renamed, to match the new board
name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Convert driver to use DT_INST macros and remove related board per
instance Kconfig symbol usage.
Additionally remove udoo_neo_full_m4.conf from gpio_basic_api test since
the Kconfig symbols don't need to be set anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
- Updates gpio driver and device tree files to the new GPIO Config flags
- Implements the new port_* APIs
- Update I2C and PWM Drivers to use new GPIO config
- Add esp32.overlay to gpio_basic_api test
- refactor convert_int_type, regs struct
- remove config_polarity
- add kConfig notes
Tests:
- samples/basic/blinky
- samples/basic/button
- tests/drivers/gpio/gpio_basic_api
- tests/drivers/gpio/gpio_api_1pin
Board:
- esp32 DevKitC V4
Note about interrupts:
The ESP32 requires specifying a CPU interrupt to be used for GPIO
interrupt signals. CPU interrupts can be either level or edge (or
special) triggered, but not both.
Please check gpio/Kconfig.esp32 for more info.
Signed-off-by: Mohamed ElShahawi <ExtremeGTX@hotmail.com>
Enables the 2-pin gpio test on the rv32m1_vega_ri5cy board by adding a
dts overlay and configuring pinmuxes on the arduino header.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
LPC54114 to use D0 and D1 pinout.
LPC55S69 to use A0 and A1 pinout.
2 pin test gpio_basic_api uses pins set up in boars' pinmux.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Added configuration for the udoo_neo_full_m4 board and
the initialization of its GPIO test pins via IOMUX controller.
Signed-off-by: Stanislav Poboril <stanislav.poboril@nxp.com>
Enables the 2-pin gpio test on the mimxrt1050_evk board by adding a dts
overlay and configuring pinmuxes on the arduino header.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adding overlays so that users can run this test on the following
boards:
- cc3220sf_launchxl
- cc3235sf_launchxl
- cc1352r1_launchxl
Instructions on pins to connect are included in the overlay files.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Update driver code and board files to use new GPIO configuration flags
such as GPIO_ACTIVE_LOW. Also add implementation of new port_* driver
API.
Tested on external SX1509B breakout board and Thingy:52.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Test that the new port API functions all behave as expected, including
physical vs logical level for input and output as well as masked and
set-based output operations. Also tests the new pin API functions.
For running on real hardware this test now uses a local test-specific
devicetree binding. For build-only tests any platform with a GPIO
alias should be tested.
The new code increases flash requirements so add a filter to exclude
platforms that won't link.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
