Modify support for u-blox BMD-345-EVAL which uses the nRF52840
and a Skyworks RFX2411 FEM.
These edits follow the naming cnoventions that is used
with the other u-blox EVKs recently added, or in progress
This board is similar to the nRF52840dk_nrf52840 with the
addition of a FEM. Four Arduino GPIO pins have been
reassigned to the PA_LNA control pins.
u-blox would prefer to use this naming convention to match
other BMD-3xx-EVAL and EVK-NINA-Bx boards recently submitted.
Tested with blinky, button, and Bluetooth peripheral_hr
Checking dts files
Updated CODEOWNERS to rename bmd_345_eval to ubx_bmd345eval_nrf52840
Added CMakeLists.txt, updated board.c
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
ADC emulator is designed to be used in tests on native_posix board. It
supports 1-16 bit resolution range and all GAINs from enum adc_gain.
Reference voltages and number of emulated channels are set through dts.
Using special API from drivers/adc/adc_emul.h it is possible to set
constant voltage value returned by given ADC channel or set custom
function which allows to simulate complex output.
Also reference voltages can be changed in runtime using the API.
The CL also includes:
- Add adc definitions of ADC emulator in
tests/drivers/adc/adc_api/src/test_adc.c for supporting test suites.
- Add test for ADC emulator API in tests/drivers/adc/adc_emul/
Signed-off-by: Tomasz Michalec <tm@semihalf.com>
add adc_dma test application
enable periodic_trigger flag for adc edma
enable for frdm_k64f and frdm_k82f
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add support for u-blox EVK-NINA-B4, which uses the nRF52833
This board is similar to the nrf52833dk_nrf52833, though it
uses a u-blox NINA-B40x openCPU module with DC-DC support
included.
Simplified pwm LED aliases
Corrected LED assignments for red, green, and blue
Addressed review comments (spi & gpio 0 0)
Tested with blinky, button, and Bluetooth peripheral_hr
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Add support for u-blox EVK-NINA-B1 which uses the nRF52832.
This board is similar to the nRF52dk_nrf52832 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected duplicate pin assignment for i2c1 in dts file
Corrected copyright date in Kconfig.defconfig
Rebase to update test_adc.c
Corrected sda-pin, scl-pin assignments and LED aliases
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Add support for u-blox EVK-ANNA-B1 which uses the nRF52832.
This board is similar to the nRF52dk_nrf52832 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Addressed review comments, including SW2
Rebased to pick up new board in test_adc.c - corrected typo
Reverted to sda-pin, scl-pin
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Add rak4631 board from RAKWireless based on nrf52840 and SX1262.
Board Documentation is completed
Signed-off-by: Guillaume Paquet <guillaume.paquet@smile.fr>
Add support for u-blox EVK-NINA-B3 which uses the nRF52840.
This board is similar to the nRF52840dk_nrf52840 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected permissions
Addressed review comments
Removed arduino_spi
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Add support for u-blox BMD-360-EVAL which uses the nRF52811.
This board is functionally equivalent to the nRF52dk with a
nRF52811 mounted in place of the nRF52832 with the exception
of not having debug-in and the shield SWD header.
DEVELOP_IN_NRF52832 is *not* required since the IC
used is the nRF52811.
Note that header pin numbers noted in index.rst are shown with
respect to the pin 1 markings on the BMD-3xx-EVAL boards, and are
flipped from the nRF52dk_nrf52811.
Tested with blinky, button, and Bluetooth peripheral_hr
Edited to include changes similar to those requested in
https://github.com/zephyrproject-rtos/zephyr/pull/33850
(nRF52810 there vs. nRF52811 here)
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
This commit is about the it8xxx2 analog to digital converter
driver. Support 8 channels ch0~ch7 and 10-bit resolution.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Add support for u-blox BMD-330-EVAL which uses the nRF52810.
This board is functionally equivalent to the nRF52dk_nrf52810
with the exception of not having debug-in and the shield SWD
header. DEVELOP_IN_NRF52832 is *not* required since the IC
used is the nRF52810
Note that header pin numbers noted in index.rst are shown with
respect to the pin 1 markings on the BMD-3xx-EVAL boards, and are
flipped from the nRF52dk_nrf52810.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected file permissions, added newline at end of CMakeLists.txt
Corrected comnment that said NRF52832 instead of NRF52810
Adding missing copyright information
Corrected link to u-blox BMD-330 (was pointing to BMD-300)
Addressed review comments, corrected permissions
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Add support for u-blox BMD-300-EVAL. Also includes BMD-301-EVAL
and BMD-350-EVAL. All share the nRF52832, and are functionally
equivalent to the nRF52dk_nrf52832 with the exception of not
having debug-in and the shield SWD header.
Note that header pin numbers noted in index.rst are shown with
respect to the pin 1 markings on the BMD-3xx-EVAL boards, and are
flipped from the nRF52dk_nrf52832.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected type in index.rst (should be nRF52dk_nrf52832, not ..810)
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
This commit adds the board definition files
needed to support the Arduino Nano BLE 33.
Tested: the following have been verified with
my logic analyzer.
* Serial peripherals (UART, I2C, SPI)
* USB
* RTC
Untested:
* PWM. In theory it should work but I don't
have a good enough logic analyzer to test this
* RTC's. The board doesn't have a backup battery.
The peripherals are enabled for modding another
battery in the device tree.
Signed-off-by: Jefferson Lee <jeffersonlee2000@gmail.com>
Introduce the field that can be used to associate a given sampling
sequence with any other data needed in the sampling-done callback
function.
Adjust one ADC API test case that uses a sequence callback so that
it checks if this introduced field is propagated as expected.
Also clarify in the description of the `sequence` parameter of the
callback function that this parameter is not supposed to be supplied
to the CONTAINER_OF() macro, to avoid any further confusion in that
regard.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
NPCX7 includes a 10-bit resolution Analog-to-Digital Converter (ADC). Up
to 10 voltage inputs can be measured and a internal voltage reference
(VREF), 2.816V (typical) is used for measurement. It can be triggered
automatically in Autoscan mode. Each input channel is assigned a
separate result register, which is updated at the end of the conversion.
The CL also includes:
— Add npcx adc device tree declarations.
— Zephyr adc api implementation.
— Add adc definitions of npcx7 in
tests/drivers/adc/adc_api/src/test_adc.c for supporting test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Instead of 0, which can happen to be a sampling result, use for marking
empty buffer entries a value that is not supposed to be written in the
buffer by an ADC driver. This value defaults to SHRT_MIN but can be
overriden, if needed, for particular boards.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
An old doxygen biolerplate was being copied all over the tests. The
defined groups are not being used anywhere and it does not follow how we
document tests for example in the kernel and other places.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The Olimex STM32-h103 is a development board based on the STM32F103RB,
very similar to the stm32_mini, which was used as a reference for the
pinmux configuration.
Signed-off-by: Josep Puigdemont <josep.puigdemont@gmail.com>
