For the native posix build the sleep calls used in tasks will stall
the zephyr instance which sets an upper limit on the data processing
interval to once every 20-30 millisecond.
This change reduces the duration of the sleep calls and increases the
TICKS_PER_SECOND to allow for shorter sleeps. This is needed to
support the data rates needed for LE Audio streaming. The rate is
tuned to support up to bidirectional 5ms ISO-intervals.
This change also increases the ISO buffer count from 1 to 5 to
allow for some buffering in the controller, which is needed for
gapless playback and/or use of burst number larger than 1.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
In tests that expect returning error in response for l2cap
connection request we use predefined PSMs. This commit adds
check for required keysize (which will always return error,
as connection is not secure and key size will always be 0)
instead of setting security level 4 (which would return
insufficient authentication, not insufficient key size).
It also adds suport for PSM used in insufficient authorization
tests - choosing this PSM will set flag that triggers error
on channel accept.
This affects tests L2CAP/LE/CFC/BV-[10-15]-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
The BabbleSim test for friendship has some timing requirements imposed
by the polling mechanism, which requires synchronization between
devices.
Add a synchronization message from LPN to the mesh device in the and
clear poll events for the friend in the group messaging test to remove
timing dependency. Add a large margin on the wait time between polls in
the friend messaging test for the same purpose.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a Babblesim test suite for the volume control service
and client, that exercises the entire API and most of the
VCS functionality.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit implements the volume control service (VCS) and
client, The implementation supports and uses the
Audio Input Control Service (AICS) and
Volume Offset Control Service (VOCS) secondary services.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Before thic commit the bluetooth/df unit tests subdirectory contained
connectionless CTE TX verification. Due to the implementation of
connectionless CTE RX new set of tests will be provided.
The new functionality requires different: configuration and common
setup code. Because of that, current test code was moved to
connectionless_cte_tx subdirectory.
Code shared by all DF tests is moved to common subdirectory.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Update the tester application to correctly reserve the number of bytes
needed for an L2CAP SDU.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Refactor and simplify the bluetooth buffer configurations to improve the
easy of configurations and eliminate invalid ones.
By moving configurations out of host and controller specific
configurations and into a common one it becomes easier to configure
the host and controller separately as the same configurations can be
used as would be for a combined build.
All HCI configurations are now given exluding the matching HCI header,
which eases the configuration as the application don't have to know the
different header sizes.
The BT_RX_BUF_LEN is split into ACL and Event, as well as the suprising
use of Command size.
BT_L2CAP_RX_MTU is removed as the stack does not support reassembling of
HCI ACL data to larger L2CAP PDUs. The application will have to set
ACL RX size and account for the L2CAP PDU header itself.
BT_EATT_RX_MTU was removed as it is only used for setting a different
default value for another option which leads to the stuck kconfig symbol
problem.
The configurations can be updated according to the table below:
** New configuration | ** Old configuration
All configurations
BT_BUF_ACL_RX_SIZE | BT_L2CAP_RX_MTU + 4
BT_BUF_ACL_RX_SIZE | BT_RX_BUF_LEN - 4
BT_BUF_EVT_RX_SIZE | BT_RX_BUF_LEN - 2
BT_BUF_CMD_TX_SIZE | BT_RX_BUF_LEN - 3
BT_BUF_CMD_TX_COUNT | BT_HCI_CMD_COUNT
BT_BUF_EVT_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_ACL_RX_COUNT
BT_BUF_EVT_DISCARDABLE_SIZE | BT_DISCARDABLE_BUF_SIZE - 2
BT_BUF_EVT_DISCARDABLE_COUNT | BT_DISCARDABLE_BUF_COUNT
Controller-build
BT_BUF_ACL_TX_SIZE | BT_CTLR_TX_BUFFERS_SIZE
BT_BUF_ACL_TX_COUNT | BT_CTLR_TX_BUFFER
HCI-bridge
BT_BUF_ACL_TX_SIZE | BT_HCI_ACL_DATA_SIZE
BT_BUF_ACL_TX_COUNT | 6
Fixed invalid configurations setting either BT_L2CAP_RX_MTU or
BT_CTLR_DATA_LENGTH_MAX larger than BT_RX_BUF_LEN could lead to buffer
overruns.
Fix advertising report max data length calculation.
This always used the BT_DISCARDABLE_BUF_SIZE macro but this feature
can be turned off and advertising reports will be allocated from the RX
buffer in that case. Also controller-build does not have this buffer
(in hci_raw.c). Also the wrong HCI header was used in the calculation,
HCI event header should have been used instead of HCI ACL header.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
There is a choice to log btmon logs over UART or RTT.
You can choose number of RTT buffer, set its name and size.
Replaced CONFIG_BT_DEBUG_MONITOR with CONFIG_BT_DEBUG_MONITOR_UART
for UART usage and CONFIG_BT_DEBUG_MONITOR_RTT for RTT.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
i is of uint type, so it'll never be negative. Thus, while loop
condition i >= 0 will always be true.
This patch also fixes issue with marking unused l2cap channels
as free by freeing only these that were marked as in_use by
get_free_channel(), and not all of them.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
If we want to test conn on legacy and ext adv, we need scanx to
handle connection more than once. Change local flag to global and
let it indicate whether we want scanx to initaite connection when
device is scanned.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
'disconnected' callback always unrefs conn object, but this is only
valid if connection was created in scanx since app owns reference to
that conn object. In case of advx, app does not own any reference so
should not unref.
Basically we do not really need to hold any reference to conn object
in either scanx or advx so just drop reference immediately after conn
is created in scanx, no need to worry about it later.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Fix bt_le_oob_set_legacy_tk excluded when Legacy OOB pairing is
supported. We still support legacy OOB when
CONFIG_BT_SMP_OOB_LEGACY_PAIR_ONLY is not defined.
It is only when we disable Legacy pairing that it is not included.
Check that the OOB data type is in fact Legacy OOB before calling
bt_le_oob_set_legacy_tk.
Log an error if the OOB type was not handled by the callback.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove undefined functions (unsued anymore).
Add missing stub implementation for new DF related radio functions.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This information is useful to the automation framework when implementing
tests where the IUT is the provisioner and the test uses two PTS
instances.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
This change adds field to L2CAP connect command allowing to choose
ECFC in L2CAP connect() function and adds required logic to perform
such connection.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
This commit implements the secondary service
Audio Input Control Service (AICS) server and client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change to use the BT_ATT_FIRST_ATTTRIBUTE_HANDLE and
BT_ATT_LAST_ATTTRIBUTE_HANDLE instead of the literal values where
applicable.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This reverts commit 24784b1452.
The change appears to have been submitted twice in different PRs.
The correct change is: 76789883e2
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add integration_platforms to testcase.yaml to catch issues during CI.
With out this change these tests only get build during the nightly CI.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
L2CAP channels are allocating buffers from common data_pool. For that
pool buffer count was hard-coded as 1. This count should be set to value
CHANNELS, allowing each channel to allocate buffer for incoming
data. Without this change, execution would stuck at l2cap_chan_le_recv()
as we give net_buf_alloc() in alloc_buf_cb() no timeout.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
In the function conn_param_update, it should send the opcode
GAP_CONN_PARAM_UPDATE, instead, it send GAP_PASSKEY_ENTRY.
Signed-off-by: Jun Huang <huangjun6@xiaomi.com>
bt_le_oob_set_legacy_tk is not defined with this
setting and this code is reachable only for legacy pairing
signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
With this change, L2CAP/LE/CFC/BV-06-C can be supported when using
BT_RPMSG and the others HCI transports.
Depending on CONFIG_BT_HCI_RESERVE, the HCI transport requires extra
headroom in a BT buffer.
Signed-off-by: Ryan Chu <ryan.chu@nordicsemi.no>
This commit implements the secondary service
Volume Offset Control Service (VOCS) server and client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This feature predated the tickless kernel and has been in legacy mode
for a while. We now have no drivers or systems that do not support
tickless, so remove this option and cleanup the code to only use
tickless.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds Friendship tests to the Bluetooth Mesh BabbleSim test suite. The
friendship tests cover all basic friend establishment and message
sending scenarios, including coverage for previous regressions, such
as #29544, #32033 and #30657.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The LOG_MINIMAL option is no longer user-configurable, as now it has
no prompt. LOG_MODE_MINIMAL should be modified instead.
But in this case, the assignment is redundant, as this option is not
enabled by default. Remove it then, to align the configuration file
for nrf5340dk_nrf5340_cpuapp with the one for nrf52840dk_nrf52840.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add privacy configuration to init test for both central and peripheral
roles with or without extended advertising.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add intergration_plaforms entry in testcase.yaml.
Thanks to that nrf52_bsim platform will be used instead
of default platforms that do not include nrf52_bsim.
The test will be not dead as it is now (executed only
when tests code has been changed).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Refactor command state state handling to one function.
When setting state outside of hci_core the cmd macro is not available,
so in order to assign the buf pointer to state the function is needed.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix compilation issue in direction finding tests, undefined references
to radio_df_ant_switching_gpios_cfg and
radio_df_ant_switching_pin_sel_cfg
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds a test suite for Bluetooth Mesh in bsim_bt tests, including 10
tests for common transport behavior. This test suite includes a readme
and a simple framework for adding more mesh tests in the future.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Added initial support for BIS (broadcast ISO stream), which
adds support for creating BISes as both broadcaster and receiver,
as well as managing and creating BIGs.
Extends PA sync to handle BIGInfo adveritising reports.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The way these scripts looked for the current working directory
was not correct or reliable. With this change it should
work properly.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Set SEARCH_PATH to "." instead of `pwd` if not set explicitly. This
avoids the construction of paths that contain `pwd` twice in test
scripts such as ll.1.sh.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Move common code that may be used by different test units
from main.c to common.c. Main.c should be clean and responsible
for unit tests executioon only. Common functionalities should be
stored in separate file and provided to test source files by
appropriate header file.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add set of functions that will make possible to configure
radio Direction Finding Extension to transmit CTE for periodic
advertising.
Some of the new Radio API functions are provided as separate
functions changing the same Radio peripheral registers, e.g.
radio_df_mode_set_aoa, radio_df_mode_set_aod. This is done on
purpose and is related with lack of DFE in nrf52_bsim.
To avoid use of conditionally compiled constants to represent
e.g. CTE mode; separate functions were introduced.
Thanks to that DF unit tests are able to compile successfully
without changes in nrf52_bsim platform. Also if DFE is added
to nrf52_bsim there is no need to change the code until it is
desired.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
ATT channels do support queueing buffer so it no longer need to block
waiting the tx_sem besides the buffer allocation already serves the
same purpose as the application will not be able to have more requests
than there are buffers available.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Two .conf files had enabled the CONFIG_BT_AUDIO_UNICAST config, but
without the CONFIG_BT_AUDIO which is a dependecy.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix BIG Sync Terminate Command to generate Sync Established
event if Sync initiation is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
