The k_fifo_ prefix is meant for kernel API functions, and
not to our socket helper. So remove the k_ prefix in order
to avoid confusion.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are waiting all the data i.e., the MSG_WAITALL flag is set,
then if we have not yet received all the data at the end of the
receive loop. We must use the condition variable to get the signal
when the data is ready to be received. Otherwise the receive loop
will not release the socket lock and receive_cb will not be able
to indicate that data is received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix a regression when application is waiting data but does
not notice that because socket layer is not woken up.
This could happen because application was waiting condition
variable but the signal to wake the condvar came before the
wait started. Normally if there is constant flow of incoming
data to the socket, the signal would be given later. But if
the peer is waiting that Zephyr replies, there might be a
timeout at peer.
The solution is to add locking in socket receive callback so
that we only signal the condition variable after we have made
sure that the condition variable is actually waiting the data.
Fixes#34964
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This value is used to measure the RX/TX statistics. The previous
use of the timestamp field did not work in RX path as the timestamp
value could be overwritten by the driver if gPTP timestamping
is enabled. So to fix the RX statistics, use a separate field
for the create time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This option was only able to collect statistics of transmitted
data. The same functionality is available if one sets the
CONFIG_NET_PKT_RXTIME_STATS and/or CONFIG_NET_PKT_TXTIME_STATS
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The RX statistics might not get updated properly because the used
ifdef was referring the TX options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Implement SO_BINDTODEVICE socket option which allows to bind an open
socket to a particular network interface. Once bound, the socket will
only send and receive packets through that interface.
For the TX path, simply avoid overwriting the interface pointer by
net_context_bind() in case it's already bound to an interface with an
option. For the RX path, drop the packet in case the connection handler
detects that the net_context associated with that connection is bound to
a different interface that the packet origin interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When recvfrom() was called with src_addr != NULL, then source address
was fetched from beginning of net_pkt. This works with native IP stack
obviously. However with offloaded IP stack there is no IP header, so
trying to parse missing IP header results in undefined behavior.
Check if network interface has offloaded IP stack. If positive, then
figure out if there is assigned remote address to network context on
which packet was received. Return this remote address, which SHOULD be
the source address of received packet. Otherwise, return an error.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Implement MSG_WAITALL flag for stream sockets. Setting this flag on
`recv()` call will make it wait until the requested amount of data is
received.
In case both, MSG_WAITALL all is set and SO_RCVTIMEO option configured
on a socket, follow the Linux behavior, i. e. when the requested amount
of data is not received until the timeout expires, return the data
received so far w/o an error.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This patch adds implementation of socket option used to get
protocol used for given socket (e.g. IPPROTO_TCP). This option
is not defined in POSIX, but it is Linux extension.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch adds implementation of socket option used to get
type of given socket (e.g. SOCK_STREAM).
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Because unoconnected stream socket doesn't have any chance to receive
any data, so a blocking recv() would hang forever on it (and does
without this change).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If there is no space in the sending window, then return -EAGAIN
so that the caller may try later.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we run out of network buffers and cannot send data, and if
we have a blocking socket, then wait until new buffers are
available before returning. As this might lead to deadlock,
wait only max 10 seconds and return ENOMEM if we cannot get
buffers in a reasonable amount of time.
Fixes#28216
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Given that the offloaded poll handling differs from the poll handling of
native sockets (entire poll function call is offloaded), some
adjustements were needed to make TLS socket work with offloaded poll
calls.
To achieve this, in case socket offloading is used, instead of jumping
directly to the offloaded poll call, a TLS wrapper for the offloaded
poll will be called. This wrapper will do additional checks at the
mbedtls level, to verify that the event is only notified to the caller
when the application data is available (i. e. not to report events
during handshake or when partial data is received, not ready to
decrypt).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add function pointer to vtable and use that directly instead of
routing via ioctl() call. This is done as we are trying to get
rid of ioctl() calls in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not route close() calls via ioctl() as that is error prone
and quite pointless. Instead create a callback for close() in
fdtable and use it directly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Under Linux when you shutdown a socket which is blocked on
an accept call the error code returned by accept is EINVAL.
Modify the socket code to be inline with this behaviour.
Signed-off-by: Léonard Bise <leonard.bise@gmail.com>
The SET_ERRNO() macro does nothing if a positive value is provided
to it, and the functions were not returning -1 or setting errno
as expected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
APIs were returning -1 without setting errno if the file
descriptor looked up a null object or there was no function
installed in the vtable. Set to EBADF for this case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When `z_get_fd_obj_and_vtable()` function returns NULL (no valid entry
in the FD table for the socket), there is no need for further usermode
checks on the `ctx` pointer, as there is nothing to invalidate in that
case.
Fixes#25990Fixes#25991
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The original sockets system calls used file descriptors which
were actually net_context pointers. For all socket system calls,
any calls from user mode would check if the caller had permission
to use the net context.
This was later changed to not stuff net_context pointers into file
descriptors, but all the permission checking was unintentionally
lost, allowing all threads on the system to
read/write all socket file descriptors in the system at will, with
no way to isolate applications running on the same microcontroller
from each other's network activity.
This patch restores the permission checks on network context objects
for socket system calls that originated from user mode.
The call to z_object_recycle() was never removed from
zsock_socket_internal(); this is again leveraged to grant the
caller who opened the socket permission on the net_context
associated with the returned file descriptor.
To ensure that all socket calls do this checking, all uses of
z_get_fd_obj_and_vtable() have been routed through get_sock_vtable().
Objects have initialization state set and thread permissions
reset to just the caller in common zsock_socket() code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Zephyr running on MPU devices have a different memory model than
process-oriented OSes like Linux and require a method to set
kernel object permissions on a file descriptor's underlying
context object. Add this, and a test to show that it is working.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If we are calling sendmsg() without any aux data, then msg_controllen
is 0 and msg_control is NULL. Check these allowed values properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are calling sendmsg() for a connected socket, then msg_namelen
is 0 and msg_name is NULL. Check these allowed values properly.
Also modify unit tests so that we test this scenario.
Fixes#25925
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are receiving UDP packet and if there is some error happening
inside zsock_recv_dgram(), then make sure that the net_pkt received
from recv_q is freed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The zsock_accept_ctx() calls z_reserve_fd() on entry but fails
to call z_free_fd() on failure. This will leak the allocated
socket descriptor.
Fixes#22366
Signed-off-by: Inbar Anson Bratspiess <inbar.anson.bratspiess@330plus.net>
Instead of using a custom offloading interface, users can use
`NET_SOCKET_REGISTER` macro to register custom socket API provider. This
solution removes a limitation, that only one offloaded interface can be
registered and that it cannot be used together with native IP stack.
The only exception remainig are DNS releated operations -
`getaddrinfo`/`freeaddrinfo`, which, when offloaded, have to be
registered specifically.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make ioctl handlers of `ZFD_IOCTL_POLL_PREPARE` and
`ZFD_IOCTL_POLL_UPDATE` return an error code instead of setting errno
variable.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If we can write to the socket in POLLOUT, then there is no need to
wait.
Note that this is not a full POLLOUT implementation but prevents
the code from waiting even if we could send data out.
Fixes#18867
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv4 header options length will be stored in ipv4_opts_len
in net_pkt structure. Now IPv4 header length will be in
net_pkt ip_hdr_len + ipv4_opts_len. So modified relevant
places of ip header length calculation for IPv4.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Handle this corner case with TCP connection closing:
1) Client A connects, it is accepted and can send data to us
2) Client B connects, the application needs to call accept()
before we will receive any data from client A to the application.
The app has not yet called accept() at this point (for
whatever reason).
3) Client B then disconnects and we receive FIN. The connection
cleanup is a bit tricky as the client is in half-connected state
meaning that the connection is in established state but the
accept_q in socket queue contains still data which needs to be
cleared.
4) Client A then disconnects, all data is sent etc
The above was not working correctly as the system did not handle the
step 3) properly. The client B was accepted in the application even
if the connection was closing.
After this commit, the commit called "net: tcp: Accept connections
only in LISTENING state" and related other commits are no longer
needed and are reverted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Applications should use setsockopt() to setup the SOCKS5 proxy,
so the old API file, which is using net_context directly, is
moved SOCKS5 directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
network device driver to the application. The data is only
calculated for UDP and TCP network packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Do not try to re-use net_context.user_data field as in many places
(like in accept) it is expected to contain pointer to net_context.
Storing the socket flags will corrupt the value. To simplify and
make things less error prone, use socket specific field in net_context
to store the socket flags.
Fixes#19191
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If socket is marked non-blocking, then accept() will return immediately
if there is no one connecting.
Fixes#19103
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
