SRP client and server require ECDSA to be enabled otherwise the build
fails. Select OPENTHREAD_ECDSA for both OPENTHREAD_SRP_CLIENT and
OPENTHREAD_SRP_SERVER options.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
OPENTHREAD_SRP_CLIENT and OPENTHREAD_SRP_SERVER are Thread features and
not Thread configuration, so move them to Kconfig.features.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The OPENTHREAD_MAX_CHILDREN and OPENTHREAD_MAX_IP_ADDR_PER_CHILD options
make not sense for a MTD device. Make them depend on OPENTHREAD_FTD.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
With the updates to mbedTLS Kconfig it is now possible to update the
OpenThread security configurations by disabling the mbedTLS prompt and
avoid stuck symbol selection.
As part of this, the OpenThread security selection has been reworked
into a choice which ensures only a single security selection can be
chosen.
And the OPENTHREAD_MBEDTLS itself has been made promptless to ensure
other parts of the build system can select a specific OpenThread
security implementation and disable user selection, if the module or
sample require such behavior.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
With the updates to mbedTLS Kconfig it is now possible to update the
OpenThread security configurations by disabling the mbedTLS prompt and
avoid stuck symbol selection.
As part of this, the OpenThread security selection has been reworked
into a choice which ensures only a single security selection can be
chosen.
And the OPENTHREAD_MBEDTLS itself has been made promptless to ensure
other parts of the build system can select a specific OpenThread
security implementation and disable user selection, if the module or
sample require such behavior.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Following commits will remove k_work from net_pkt, so convert
PPP L2 to use k_fifo when sending PPP data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Following commits will remove k_work from net_pkt, so convert
6locan L2 to use k_fifo between application and TX thread, and
driver and RX error handler.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit implements the OpenThread APIs to configure Enhanced-ACK
Based Probing in radio for a specific Initiator. This is needed for
Link Metrics functionality.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
OpenThread modified its NCP API, so we need to align with these changes
in Zephyr.
One of the major changes was removal of UART from the platform APIs.
`openthread/platform/uart.h` header file was moved to
`examples/platforms/util/uart.h` so we need to use the new location in
Zephyr. This means that OpenThread no longer impose the UART API but for
the simplicity of the upmerge I've kept the UART APIs as they are for
now.
The NCP initialization function have now to register a send handler,
and the appropriate transport driver have to call NCP callbacks when
transmission/reception is done. For now, re-use the existing code of
the UART driver, just as the upstream NCP application does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This PR increases the OpenThread stacks to compensate
for the runtime increase of the MPU stack guard
when the usage of the FP context is detected.
Signed-off-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Use recently introduced API, which takes care of gracefully closing any
pending DNS requests and replacing existing DNS server list with new
one.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This aligns the error handling of send function to never unref the
buffer in place so the caller retain the ownership of the buffer
whenever there is an error.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The virtual_iface is already NULL checked by net_if_get_by_iface()
at the beginning of the function so no need to do it here too.
Coverity-CID: 220535
Fixes#34006
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simplifying the loop in order to remove dead code (ctx_up is
always NULL after the slist loop.
Coverity-CID: 220538
Fixes#34003
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Logging v2 is using _Generic keyword for detecting type of
log message arguments. Apparently, it does not support handling
of pointers to forward declared structures. Added casting to void *.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Create net_l2_send() function which will be called by each L2
sending function so that we can catch all the network packets
that are being sent. Some L2 layers send things a bit differently,
so in those cases call the net_capture_send() directly by the L2
layer.
Add network packet capture call in receive side after the pkt has
been received by the RX queue handler. This avoids calling the
net_capture_send() from ISR context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add infrastructure to allow user to configure the system so that
all the network packets, that are sent to or received from a specific
network interface, are sent to remote system for analysis.
The captured network packets are placed as a payload in UDP packet,
which is then sent inside a tunnel to a remote host. The host can
then receive the packets and for example show them in wireshark.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPIP tunnel capability bit helps to detect which network
interface supports IPIP tunneling.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Introducing PPP dialup features to enable e.g. usage of nrf9160
based board as a dialup modem for transferring ip data over PPP
(e.g. windows dial up), i.e. usage of Zephyr PPP as a server for
providing MTU/MRU, IP address and DNS addresses for a PC:
- PPP LCP MRU option (configurable)
- PPP server: IPCP ip and dns address peer options to enable
providing IP and DNS addresses for PPP peer.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
This can be used to implement tunneling, VPN etc. The virtual
interfaces can be chained together to support multilayer
network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Move ptp_clock.h out of the top level include/ dir into
include/drivers/ptp_clock.h and deprecated the old location.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
net_eth_carrier_on() and net_eth_carrier_off() call k_work_init() on
work item that can be pending or still be processed in another thread.
This results in undefined behavior.
Initialize work item once and use an atomic flag to switch between
up/down carrier state. Submit work to workqueue whenever up/down carrier
state changes, so that last state is always properly propagated to
network interface layer.
While at it, save network interface pointer during ethernet context
initialization, so that is becomes static (and thread-safe) during whole
ethernet context lifetime.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
net_ppp_carrier_on() and net_ppp_carrier_off() call k_work_init() on
work item that can be pending or still be processed in another thread.
This results in undefined behavior.
Initialize work item once and use an atomic flag to switch between
up/down carrier state. Submit work to workqueue whenever up/down carrier
state changes, so that last state is always properly propagated to
network interface layer.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
When using `OPENTHREAD_ECDSA` deterministic variant has to be
enabled after some OpenThread changes. Also generic public key
functions are required.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
This lets an application detect when a PPP connection fails to establish
or terminates, so that the connection can be reattempted (for example,
by setting carrier off and on).
Signed-off-by: Jim Paris <jim@jim.sh>
* Added implementations of otPlatCAlloc and otPlatFree methods
necessary for the OpenThread in case of using EXTERNAL_HEAP.
* Added CONFIG_OPENTHREAD_DNSSD_SERVER option to allow enabling
OT_DNSS_SERVER feature.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
Remove `OPENTHREAD_CONFIG_NCP_BUFFER_SIZE` define since it does not
exist in OpenThread.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Bogus fragmented packet could be sent without a FRAG1 fragment and hit
reassembly. Let's make sure this does not happen.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In case the current packet is the same as the cached one, let's not
unreference it while clearing the cache.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Though ACK frames are not meant to reach L2 (drivers must ensure this
never happens), let's "re-enforce" the L2 by dropping them.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All addressing mode but IEEE802154_ADDR_MODE_NONE should have a valid
address. If not, the frame is invalid.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
After the latest upmerge, OpenThread requires explicit configuration
of the Master Key. This commit adds a Kconfig symbol that can be
used to setup its value. By default no Master Key is configured and
OpenThread generates a random one.
The Sockets Echo samples are configured with a fixed key with this
commit.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
6lowpan over BLE should work without solicit node multicast messages
according to RFC7668[1], but that requires Neighbor Solicitation with
Address Registration Option, which is currently not implemented in
either Zephyr or Linux. This is causing the router to fallback to normal
neighbor solicitation based discovery, but the NS frames are being
discarded in the host stack because the solicit node multicast groups
are not registered.
This drops the NET_L2_MULTICAST_SKIP_JOIN_SOLICIT_NODE as a workaround
and adds a TODO about it.
[1] https://tools.ietf.org/html/rfc7668#section-3.2.3
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Modifies openthread shim layer to automatically join multicast
addresses as they are added to zephyr from openthread, unless the
address is interface-local or link-local. This allows incoming
openthread multicast group messages to avoid being filtered by
zephyr ipv6 recv.
Fixes#31085
Signed-off-by: Joel Frazier <frazieje@gmail.com>
