This option was only able to collect statistics of transmitted
data. The same functionality is available if one sets the
CONFIG_NET_PKT_RXTIME_STATS and/or CONFIG_NET_PKT_TXTIME_STATS
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Implement SO_BINDTODEVICE socket option which allows to bind an open
socket to a particular network interface. Once bound, the socket will
only send and receive packets through that interface.
For the TX path, simply avoid overwriting the interface pointer by
net_context_bind() in case it's already bound to an interface with an
option. For the RX path, drop the packet in case the connection handler
detects that the net_context associated with that connection is bound to
a different interface that the packet origin interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
With these changes, dial up Zephyr application/driver can use
socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW) for creating
a socket for sending/receiving data to/from ppp net link, i.e.
packet is going to/from PPP L2.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
The address pointer cannot be null at this point so remove
the checks.
Coverity-CID: 219595
Fixes#33071
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
If we are sending a network packet and if the remote address
is not set in the context (which means that connect() has not
been called), then we must set the target network interface
to a proper value.
This is done so that when we select the local source address,
we might select the wrong interface if we have multiple network
interfaces in the system. In this case the packet would be always
assigned to first network interface regardless of the destination
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the network interface is down when trying to send a message,
return -ENETDOWN as we cannot send a message in this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This change adds net_context_port_in_use(), which is a simple
wrapper around net_context_check_port() and is used to check
if a particular socket is bound to a given IP address.
Fixes#29649
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
The commit 93e5181f ("net: context: Add locking for concurrent
access") added net_context locking to only IPv4 sockets.
That is not enough and we need locking also to other supported
socket address families like IPv6, SocketCAN and packet socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Release the context lock before passing data to the application
socket as that might cause deadlock if the application is run
before the RX thread and it starts to send data and if the RX
thread is never able to run (because of priorities etc).
Fixes#29347
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The socket layer expects to receive -ENOBUFS if we do not have
any network buffers so cannot build a network message to be sent.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because the previous commit fixed the destination address check,
we need to handle msghdr (used by sendmsg()) in CAN socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to specifically check CAN sockets here. This also means
that SocketCAN will need to support sendmsg() call too. This will
come in following commit.
Fixes#28229
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to create SOCK_DGRAM type AF_PACKET socket. This
allows user to send raw IP packets without specifying
L2 (like Ethernet) headers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The link address was not printed correctly as log_strdup() was
missing from the debug print.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_context API will change, the s32_t timeout parameter
will be changed to k_timeout_t. All the Zephyr users of this API will
be changed in subsequent commits. This is internal Zephyr API only,
so the API is not deprecated etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_context local sin/sin6 addresses are used only
when input src is not available. So ASSERT should
be inside if block.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In order to drop dependency on a heap, drop the
test send window.
Use net_tcp_queue_data() to receive the outgoing data
from the socket layer.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
If the system has more than one network interface, then it should
be possible to bind a AF_PACKET socket to each interface if the
network interface index is set when bind() is called. This was
not possible earlier as the code was always using default network
interface with AF_PACKET socket bind().
Fixes#23153
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Since TCP needs to be able to decide how much data is to be sent
in a TCP segment and when the segment needs to be sent, the TCP
data buffer needs to be passed down to the TCP stack. For tcp2
this causes a new function handling the data as a buffer or as an
iov to be implemented and only that function is called when
sending data out via the new TCP stack. net_tcp_send_data() is
invoked as the caller expects to be informed when the data has
been sent.
For the current stack keep the sending functions as is.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
* The issue is found in supporting offload module esp8266
* For device like esp8266, it's responsible for tcp/udp handling,
no need of net_tcp related functions
* This commit is only tested for esp8266, no gurantee for other
modules
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
If we are getting an old net_context, clear the content of it
in order to make sure we do not have old data in it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the UDP socket is connected, then allow the user to leave
out the remote address in msghdr struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
If sendmsg() is used for TCP sockets, the msghdr->msg_name is not
really used as the socket must already have been connected.
In that case just get the destination address directly from
net_context remote address field.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The SO_SOCKS5 socket option can be used by the application to
set the SOCKS5 proxy details. These details will be used when
connecting to peer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The SO_TXTIME socket option can be used by the application to
tell the network device driver the exact moment when the
network packet should be sent.
This feature is also implemented in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Finalize the CONFIG_NET_CONTEXT_TIMESTAMP support that was started
earlier but never properly finished. We collect network statistics for
TX packet network stack throughput time from when the net_context_send
is called and when the net_pkt was sent out successfully by the network
device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the socket is closed, then do CAN detach if that is needed.
This way the CAN interrupts are not received if there are no
CAN sockets listening the data.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
At the moment there is no real address for local CANBUS socket,
but we can still set protocol family of local socket to AF_CAN
so that for example net-shell "net conn" command can show
information about it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to dispatch the received CAN frame if there are multiple
sockets interested in the same CAN-IDs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
During net_pkt/net_context API changes, some ip handling blocks were
ordered ipv4 first, ipv6 second. While it is the contrary everywhere
else. So reordering to get things consistent.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- Not all #ifdef can be removed: those which have a dedicated attribute
in struct net_context.
- For CONFIG_NET_CONTEXT_CHECK: switching the NET_ASSERT_INFO to
NET_DBG (simpler to read and anyway an error code is returned)
Fixes#8725
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The context_alloc_pkt() might run out of memory, and if that
happens we must not try to set the context pointer in it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Commit fc27a81ed2 ("net: context: Select proper network interface
when binding") moved the bind_default() call to after the remote
address was set for the net_context.
This and a later net_pkt API refactor broke net_offload() handling
so that context->iface wasn't set and context->flags didn't have
NET_CONTEXT_REMOTE_ADDR_SET correctly.
Let's fix this by relocating the net_offload handling to after
these have happened.
Signed-off-by: Michael Scott <mike@foundries.io>
net_offload API is left untouched, so it still takes a net_pkt as input
for the buffer. This is under-optimized since offload drivers will copy
the data from that net_pkt back into contiguous buffer again.
Let's tackle this issue another time.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And also to the relevant callbacks.
That parameter is not used anywhere so it is useless.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
