`write_stats` functionality implementation is guarded by
`BT_GATT_CLIENT`, but is also called from commands defined when
`BT_GATT_DYNAMIC_DB` is set. This means that now application will not
build with `BT_SHELL` used, when we set `BT_GATT_DYNAMIC_CB` solely.
Move this functionality to top of the file without guarding
ifdefs, so it can be used in all gatt shell commands.
Signed-off-by: Marek Metelski <marek.metelski01@gmail.com>
Change to use the BT_ATT_FIRST_ATTTRIBUTE_HANDLE and
BT_ATT_LAST_ATTTRIBUTE_HANDLE instead of the literal values where
applicable.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix gatt write command returned "write in progress" when either
hex2bin or bt_gatt_write returned an error.
The write_params.func should not be set if the write command was not
successful.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This makes it possible to pass different byte arrays to gatt write
making it usable to test attributes that take more than a single byte.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Make it actually give the original pointer to the attribute and its
resolved handle so static attributes don't need an extra lookup.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add the command add-subscription to the shell to test the
bt_gatt_add_subscription API.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Added a feature that allows an application to request
automatic discovery of the CCCD handle when subscriping
to a characteristic. In order to preserver RAM, the application
is expected to provide the discovery parameters, and it's up
to the application whether or not it wants to reuse the
discovery parameters or use one for each characteristic.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
If bt_gatt_subscirbe fails value_handle must be reset since otherwise it
will not possible to subscribe again as the parameters will be consider
in use.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Expose the bt_uuid_to_str function as an API to the application.
This aligns this function with the bt_addr_to_str function call. This
allows the application to use this function without having to enable
the BT_DEBUG option.
Move the in-place bt_uuid_str to internal logging, this is mainly done
due to the limitation in the log_strdup that shouldn't be exposed to the
application.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
GATT parameters need to remain valid while the procedure is active.
Disallow GATT commands while the procedure is active to avoid asserting.
Fixes: #20232
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This adds support to set different permissions to CCCD so security can
be checked when enabling notification which conforms to:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2360:
'3.3.3.3 Client Characteristic Configuration
Authentication and authorization may be required by the server to
write the configuration descriptor.'
In addition to that also ensure that notification are not re-enabled
until the proper security level is reached to conform to the following
statement:
'10.3.1.1 Handling of GATT indications and notifications
A client “requests” a server to send indications and notifications
by appropriately configuring the server via a Client Characteristic
Configuration Descriptor. Since the configuration is persistent
across a disconnection and reconnection, security requirements must
be checked against the configuration upon a reconnection before
sending indications or notifications. When a server reconnects to a
client to send an indication or notification for which security is
required, the server shall initiate or request encryption with the
client prior to sending an indication or notification. If the client
does not have an LTK indicating that the client has lost the bond,
enabling encryption will fail.'
Fixes#17983
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes the necessity of registering the storage for CCC and make
it part of the declaration itself.
Fixes#18547
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The 'registered' flag was not cleared when 'gatt metrics off'
was called so that one was unable to register the service again.
Remove 'registered' variable that is actually not needed as there
is no tracking if service is already registered in similar
cmd_register_test_svc command. If the service is already registered,
the host will log an error.
Fixes: #17882
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Error codes are listed in header files and in the core spec as hex
values. Always print them in hex in debug for easier error code
checking.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This API had several issues:
- The parameter types and order were inconsistent with e.g.
bt_le_adv_start()
- There were no real users of num_params, which just caused increased
code size and memory consumption for no good reason.
- The error handling policy was arbitrary: if one of the
notifications would fail it would be impossible for the caller to
know if some notifications succeeded, i.e. at what point the
failure happened. Some callers might also want to make note of the
failure but continue trying to notify for the remaining parameters.
The first issue is easily fixable, but because of the other two I
think it's best we don't have this code as part of the stack, rather
require whoever needs it to do the for loop themselves. It's just a
few lines of code, so the benefit of having this in the stack was
anyway quite minimal.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds number of matches as optional parameter to gatt show-db:
> gatt show-db 2803 1
attr 0x005065f0 handle 0x0002 uuid 2803 perm 0x01
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This make use of bt_gatt_foreach_attr_type in gatt show-db to match
attributes by UUID.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This allows setting a custom pointer to be passed back to the complete
callback at expense of increasing the buffers in 4 bytes.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces set command to GATT which can be used to write local
attributes:
uart:~$ gatt set 0x000b 62 6c 61 68
attr 0x004235a8 uuid 2a00 perm 0x09
00000000: 62 6C 61 68
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces get command to GATT which can be used to read the
local attributes:
uart:~$ gatt get 0x000b
attr 0x004235a8 uuid 2a00 perm 0x09
00000000: 74 65 73 74 20 73 68 65 6C 6C
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables locating specific attribute in the database:
uart:~$ gatt show-db 0x2a00
attr 0x004235a8 handle 0x000b uuid 2a00 perm 0x09
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is planned to deprecate SHELL_CREATE_STATIC_SUBCMD_SET macro
which is replaced by SHELL_STATIC_SUBCMD_SET_CREATE.
Additionally, removed irrelevant comments about alphabetical
ordering which is no longer needed.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
This adds write-without-response-cb command which can be used to
confirm the transmission of the PDU using bt_gatt_write_without_rsp_cb.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
1. Created new shell module: shell_help.
2. Simplified command handlers with new shell print macros.
3. Removed help functions from command handlers.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing help "options" from shell API.
Currently SHELL_OPT macro is not used by users. What is more
commit: a89690d10f ignores possible options created in
command handler by the user. As a result they are not printed
in help message.
Second, currntly implemented "options" in command handlers options are
implemented without SHELL_OPT macro.
And last but not least this change will allow to implement
help handler in a way that user will not need to think about calling
functions printing help in a command handler.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The code had somehow gotten corrupt (yet in a way that it compiles) so
that an intended if-branch was missing.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
