Replace the use of LL_FEAT define with ll_feat_get() so that
feature set value can be updated at runtime with host
feature bit values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in central initiated terminate introduced in
commit 3a80785947 ("Bluetooth: controller: Fix connection
terminate to happen on event done").
The regression caused an additional central connection event
transmitting PDU after the previous connection event had
received acknowledgment for the terminate_ind PDU from the
peripheral.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Avoid using sizeof to access ULL and LLL struct members.
Based on the alignment requirements of structures, due to
padding between structure members, use of sizeof of previous
struct member to access next struct member is incorrect.
Continue to use explicitly stored parent pointer to access
ULL context. Combine event header and ULL header so that
the parent pointer point directly to the combined ULL
struct.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix conn_cleanup to be performed in the event done. The
regression was introduced in
commit 5412f61ac6 ("Bluetooth: controller: Introduce
separate done memq").
Now that done event is handled asynchronously outside the
handling of the terminate node rx type, it is necessary that
terminate node rx type is generated after the done event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In the time between a NODE_RX_TYPE_CONNECTION node is sent from LLL and
demuxed in ULL, an ADV role disable may be executed.
This makes the LLL data referenced in the node NULL/invald, and
ull_conn_setup would operate on invalid data.
This commit introduces a check in ADV disable to disallow the operation
(including conn invalidation), if a connection has been initiated.
To prevent pipeline-queued prepares from advertising after disable has
been initiated, set 'cancelled' flag for immediate signalling to LLL.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The ticker 'force' flag is propagated via the ticker elapsed callback,
in order to provide necessary information for collision resolving in the
link layer.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Renamed to BT_TICKER_LOW_LAT in ticker, and changed selected
conditionally compiled code to use IS_DEFINED macro.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Move the initiated bit flag into role specific union, so that
other role specific bit flags can share bit space in the LLL
context structure.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ignore connection indications from peers that are already
connected. This is to bring the behavior of the controller in
accordance with [5.2, Vol 6, Part B, 4.5 Connection state]:
"If an advertiser receives a connection request from an initiator it
is already connected to, it shall ignore that request."
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Rename the peer's address in the advertising set struct from `id_addr`
to `peer_addr` to clarify what the address refers to.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix an assertion when disabling Extended Advertising with
auxiliary PDUs. Stop the auxiliary PDU scheduling after the
primary PDU scheduling is stopped first. This will avoid the
assertion caused due to a search for a stopped auxiliary PDU
offset by the primary PDU scheduling that is being stopped.
Fixes#32866.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When Extended Advertising terminated due to duration or
maximum number of events, the auxiliary PDU scheduling
is now correctly stopped.
Fixes#31254.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use an "initiated" flag in the lll_conn struct to guard the processing
of PDUs related to connection initiation (CONNECT_IND,
AUX_CONNECT_RSP). This avoids races between ULL and LLL when creating
a connection.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Remove inclusion of vendor specific internal LLL include
files in ULL source code.
Prefix `lll/` include file path to correctly include vendor
defined types and function implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move LLL header files for all roles to common folder. Move
vendor-specific content to internal header files, in particular ADV
buffer handling. Define the vendor-specific type lll_adv_pdu in a
separate header file lll_adv_pdu.h to avoid cyclic dependency when
moving ADV buffer handling to internal header file. Make sure all
internal header files are in vendor-specific folders.
The goal is to have a more consistent structure for LLL header files
and allow unconditional inclusion of non-internal LLL header files.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
We need to make sure aux is cleared on reset, otherwise we may end up
with legacy advertising with aux.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Set #0 is used for legacy advertising when legacy HCI commands are used
and in such case it's possible to enable advertising without any prior
configuration. This means we should better always have PDUs in set #0
initialized with default empty data.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
We should remove all advertising sets when resetting controller. It's
enough to just clear is_created flag for each set.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Add release of memory acquired for periodic advetising sync. set
when:
- advertising set is removed
- advertising parameters are changed and past PDU type was
extended advertising PDU
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix missing initialization of ticks_to_offset value on
instantiation of new peripheral context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to run local peripheral initiated control
procedure with instant in parallel with remote initiated
encryption procedure.
Relates to #28887.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Defined 625 and 1250 as context specific interval common to ULL and LLL.
Checked with bluetooth sanity checks.
Fixes#23314.
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
We have convenient PHY_1M, PHY_2M and PHY_CODED symbols defined but
they are not used too much in the code. This replaces all usages of
magic numbers and other symbols as PHY constants with those symbols.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Make sure phy is properly initialized to 1M when ext adv is supported
and legacy advertising instance is being enabled.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Connection structs need to be initialized when advertising is enabled
on connectable extended advertising instance.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Connection created from extended advertising instance uses the same phy
as on secondary channels.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Fix PHY Update control procedure to accept the preferred Tx
coding options (S2 or S8) requested even if there is no
actual PHY change happening on procedure completion.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
'ext_hdr' member only covers extended header part of 'ext_hdr_adv_data'
and with addition of 'data' member to 'pdu_adv_ext_hdr' those can be
used to quickly access both extended header flags and data directly
from 'pdu_adv' without need for extra local variables and casts.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
pdu_adv_hdr name is quite confusing since it suggests some generic
header for advertising PDUs while this in fact is extended header
which is a part of common extended advertising payload and only applies
to extended advertising PDUs.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
The 'adi' part of that member name does not make sense since ADI is
already part of extended header, so we only have 'extended header' and
'advertising data'.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
If handle mapping is enabled, we need to use proper advertising set
handle in HCI event.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
When legacy set is configured we need to make sure scan response is
properly initialized with empty data. For extended sets we should not
touch scan response on configure since data for those sets have to be
set explicitly, e.g. we cannot enable scannable advertising set if no
data was set.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
AdvA in extended advertising PDUs was only set if random address was
used. This patch enables proper support for AdvA/TgtA in those PDUs
also with LL Privacy enabled.
On enable, we always update advertising PDU (i.e. ADV_IND, ADV_EXT_IND
or ADV_AUX_IND, depending on advertising set parameters) as well as
scan response PDU.
On RPA timeout, we simply copy old PDU as-is and update AdvA in new
PDU, since both PDUs are exactly the same (except AdvA) so no need to
recreate it step-by-step.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Fix Extended Advertising Data population when there is no
Extended Header to be filled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
ull_adv_data_set() is only used for legacy advertising data (either via
legacy HCI command or as fallback for extended advertising set which
uses legacy PDUs) so there is no need to check for extended advertising.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Add generation of Advertising Set Terminated event on High
Duty Cycle Directed Advertising Timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
