The commit adds initialization of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
USB MSC sample has been expanded over time. Config overlays
for RAM disk and flash disks were added. Board specific overlays
followed. It was overlooked that they forced a specific
configuration for the nrf52840dk_nrf52840 board,
even if it was not explicitly desired
(for example RAM-disk). This also caused strange behaviour
during automatic MSC USB3CV tests (which explicit selects RAM-disk)
so that nrf5340dk_nrf5340_cpuapp board passed test
but nrf52840dk_nrf52840 failed.
Rework disk and file system configuration, and initialization
code, allow to use FAT file system on top of RAM disk.
This sample can be built with none or one of two supported
file systems, LittleFS or FATFS. Disk subsystem can be flash
or RAM based. LittleFS only works with flash disk.
There are four useful possibilities:
- RAM disk without any file system for testing (default)
- RAM disk with FAT file system
- flash disk with FAT file system
- flash disk with LittleFS
Flash disk configurations is only available (as before) for
nordic,qspi-nor compatible, but only need the device tree overlay
per platform without a config overlay.
This path also revises test cases.
Remove invalid "flash" tag from depends_on key.
Remove unnecessary gpio tag and exclude native platform.
Resolves: #26275
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
After HW stack protection option was globally enabled for
nRF SoCs turned out main stack size is too small for
USB mass storage sample. Increase to avoid overflow.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Add configuration and overlay files for Adafruit feather nRF52840.
README has also been updated and improved. Documentation related to
littlefs has been moved to an independent section as it could apply to
any sample.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Make the flash-backed USB mass storage sample depend on usb_device and
flash instead of just flash.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
USB access to the flash device is not synchronized with the
application, so if the application needs to create a new file system
USB may read configuration state that is incorrect. Wait until the
the application is done with the flash before starting USB.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Left unset it becomes the first partition, which is not what's used
for littlefs, and specifically isn't on the external flash for
nrf52840dk_nrf52840.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The flash interface header needs to be available regardless of
selected filesystem implementation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This allows mass storage exposure of a littlefs file system,
specifically one on the SPI NOR flash of the nrf52840dk_nrf52840. In
combination with littlefs-fuse this allows a host system to examine
and change the local storage of a Zephyr application.
Note that it is critical that all parameters of the file system match
between what Zephyr is using and what littlefs-fuse is using.
Inconsistencies can produce confusing results where each system sees
different content. The README has been updated with a detailed
example.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Drop the old redefine-everything-in-a-special-conf approach and put
the customization appropriate for this board into the board directory
where it's handled automatically.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
By this commit user gets possibility to register USB
device satutus callback. This callback represents device state
and is added so user could know what happend to USB device.
Callback is registered by providing it to usb_enable()
USB api is extended by this callback handler.
Samples using using USB are by default provide no callback
and the usb_enable() is called with NULL parameter.
Status callback registered by hid class is deleted as now
USB device has global callback for all classes within device.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This board and SoC was discontinued some time ago and is currently not
maintained in the zephyr tree.
Remove all associated configurations and variants from the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move fs.h to fs/fs.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unique PID is required for each sample in order
to be recognized by host.
When creating a new sample:
- Add USB_PID_<SAMPLE_NAME>_SAMPLE
in samples/subsys/usb/usb_pid.Kconfig
- Create Kconfig file in your sample's subdirectory, containing:
config USB_DEVICE_PID
default USB_PID_<SAMPLE_NAME>_SAMPLE
source "Kconfig.zephyr"
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Adds required Kconfig options for flash driver.
Adds FatFS filesystem for flash disk.
Fixes#14459.
Note: As USB MSC does not support multiple disks (see #14937),
only one (flash by default, modify CONFIG_MASS_STORAGE_DISK_NAME
to "RAM" for RAM disk) will appear to host.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
To support mass storage over USB in RAM we need a board with
sufficient RAM. Fix failing tests for boards with low memory.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added a warning that will abort build without disks.
Added a default configuration for nrf52840_pca10056.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The USB mass storage documentation was completely outdated. Rewrite it
using reStructuredText, and mentioning the two possible overlays.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Add console harness support for USB mass storage test.
Also, using overlay config for DISK_ACCESS configuration
and accessing the different config file with different
method.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Assign the appropriate disk name Kconfig option to the
usb mass storage sample test.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Each USB sample, when compiled, will provide a different
USB product string. A "nice to have" feature when trying
out the USB samples (they will show up differently in
`lsusb` or `dmesg`), and also illustrates how to set up
custom USB constants in the config files.
Requires #6589.
Signed-off-by: Iván Sánchez Ortega <ivan@sanchezortega.es>
At the moment CONFIG_SYS_LOG_USB_LEVEL name does not specify that this
is log level for the Device Stack. Make it clear renaming to the
proper name.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
