File prj.mcp2515.conf was previously removed from project as it was
made redundant.
Paths containing uppercase CAN were changed to lowercase.
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
The PR fixes the pwm_led sample:
- now test doesn't rely on any specific device name
- Logs which are scanned with regex in the test are printed
only after a command passes (before failures were not
affecting the test verdict)
- If 1 sec cycle is not supported appropriate info is printed
and won't cause the test to failed
- Changed second "Turned off" msg so regex doesn't mix it with the
the first one.
Fixes#35524
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Enable the option to pause the watchdog if the MCU is halted by a
debugger.
This fixes an issue with some Nordic MCUs (see #33509) where the board
could not be flashed anymore if a short watchdog timeout (<100 ms) was
used.
Signed-off-by: Martin Jäger <martin@libre.solar>
Converts the display driver and lvgl sample.yaml to select boards for
the adafruit_2_8_tft_touch_v2 shield configuration by depending on the
arduino_{gpio,i2c,spi} features instead of using an explicit
platform_allow list. This will enable twister to automatically select
new boards that add support for Arduino ports.
The reel_board and reel_board_v2 are excluded due to a conflict between
display drivers (onboard display vs. shield display).
The ubx_evkannab1_nrf52832 board is excluded due to a conflict between
the arduino_spi and arduino_i2c ports, which cannot be used
simultaneously.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
If the label property is missing in a "pwm-leds" compatible DT node
(which is almost always the case), then the device name is now set to
DT_NODE_FULL_NAME instead of "LED_PWM_$inst" previously.
This allows applications to use the DEVICE_DT_NAME macro to retrieve
the device name instead of gessing an arbitrary string.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Introducing MBEDTLS_PROMPTLESS and CUSTOM_MBEDTLS_CFG_FILE settings.
The MBEDTLS_PROMPTLESS can be set to true whenever configuration of
mbedTLS is done from a subsystem or module.
Such an example is OpenThread, which selects mbedTLS for some predefined
crypto settings using OPENTHREAD_MBEDTLS=y.
Unfortunately, extensive use of select can easily cause stuck symbol
syndrome making it harder than neccesarry for users to later reconfigure
as they easily get stuck in incompatible configurations.
Providing a MBEDTLS_PROMPTLESS allows such configurations to disable the
MBEDTLS prompt itself when selected but avoid stuck symbol if user
select another security configuration.
Similar with CUSTOM_MBEDTLS_CFG_FILE which ensures that user must
explicitly select this symbol before providing a custom mbedTLS config
file.
Today, other parts the Kconfig tree may set a default value for
MBEDTLS_CFG_FILE but that value is stuck and thus changed Kconfig
selections elsewhere in the tree will not adjust the value.
Introducing CUSTOM_MBEDTLS_CFG_FILE ensures it is known when the user
has provided the value.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Introducing MBEDTLS_PROMPTLESS and CUSTOM_MBEDTLS_CFG_FILE settings.
The MBEDTLS_PROMPTLESS can be set to true whenever configuration of
mbedTLS is done from a subsystem or module.
Such an example is OpenThread, which selects mbedTLS for some predefined
crypto settings using OPENTHREAD_MBEDTLS=y.
Unfortunately, extensive use of select can easily cause stuck symbol
syndrome making it harder than neccesarry for users to later reconfigure
as they easily get stuck in incompatible configurations.
Providing a MBEDTLS_PROMPTLESS allows such configurations to disable the
MBEDTLS prompt itself when selected but avoid stuck symbol if user
select another security configuration.
Similar with CUSTOM_MBEDTLS_CFG_FILE which ensures that user must
explicitly select this symbol before providing a custom mbedTLS config
file.
Today, other parts the Kconfig tree may set a default value for
MBEDTLS_CFG_FILE but that value is stuck and thus changed Kconfig
selections elsewhere in the tree will not adjust the value.
Introducing CUSTOM_MBEDTLS_CFG_FILE ensures it is known when the user
has provided the value.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Replace DT_CHOSEN_ZEPHYR_CAN_PRIMARY_LABEL with DEVICE_DT_GET on the
chosen node itself.
This is causing a build error in CI for the waveshare_open103z board
because it disables CAN by default in favor of USB. Throw in an
overlay reversing that decision for the sake of this sample to keep
things building. (Though the build previously succeeded, the
device_get_binding() call would simply have failed.)
Replace the LED access with GPIO_DT_SPEC_GET_OR. This changes the
semantics slightly so that the simulated LED implemented via printk()
is run if either the node is missing or the pin cannot be configured,
instead of just running when the node is missing. An unready LED port
when the node is defined still returns early from main.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Require board overlays to configure the sample in the /zephyr,user
node, and access the device with DEVICE_DT_GET instead of
device_get_binding(). Update the documentation and move existing board
configuration to overlays.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add rak4631 board from RAKWireless based on nrf52840 and SX1262.
Board Documentation is completed
Signed-off-by: Guillaume Paquet <guillaume.paquet@smile.fr>
The stm32 wwdg driver was currently tested only on disco_l475_iot1.
Additionally add nucleo_f091rc, such that one board with an CM0 core is
tested. And add nucleo_g431rb, that one board is included that has
newer register mapping and a 128 prescaler.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Some tools consider this as commented code because of the ifdef, so
remove that and fix a coding guideline violation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch removes scenario which was testing deprecated
API behaviors. Needed as As flash_write_protection_set() was
deprecated and became no-operation.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Now that we can use the adafruit_2_8_tft_touch_v2 shield with
mimxrt685_evk_cm33 and frdm_k64f boards, start building the display
driver and lvgl samples for these boards in CI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch adds a new sample application demonstrating basic
usage of FT800 display controller including touchscreen events.
Signed-off-by: Hubert Miś <hubert.mis@gmail.com>
This fixes the limitation of sending an extended CAN frame.
Because the default value of `CONFIG_SHELL_ARGC_MAX` is 12 the maximum
number of bytes for an extended CAN frame is 7.
Increasing it to 13 to allow all 8 bytes to be sent from the shell.
Tested on nucleo_f767zi.
Signed-off-by: Cezar Burlacu <cezar@embeddedp.ro>
Add supported peci response codes 0x80 (Out of resources timeout)
and 0x81 (Resources required to service the command are in low
power state).
Signed-off-by: Diwakar C <diwakar.c@intel.com>
Remove SPI_[0-8] and SPI_[0-8]_OP_MODES Kconfig symbols as no driver
uses them anymore. We also cleanup board and sample code to remove
use of these symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to just native_posix. This
should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
A different configuration is applied when running this test
using west or using twister.
Both will use the disco_l475_iot1 overlay, but the extra config
for clock bus tunning is applied only when using twister and
samples is failed when run with west.
Move this extra config from sample.yaml to board .conf file so
it is applied in both cases.
Fixes#32376
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
