This is another API that is being used in all timer drivers and is not
internal to the clock subsystem. Remove the leading z_ and make promote
it to a cross-subsystem API.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Such interrupt remapping controller may be found along with Intel VT-D
hardware. Its base-address is via ACPI, and it enables up to 64K
interrupt indexes.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
According to Intel 64 and IA-32 Architectures Software
Developer’s Manual, volume 3, chapter 8.2.5, LFENCE provides
a more efficient method of controlling memory ordering than
the CPUID instruction. So use LFENCE here, as all 64-bit
CPUs have LFENCE.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Without this builds for qemu_x86 can't invoke k_cycle_get_32()
because z_timer_cycle_get_32() is installed with a mangled name.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We use a fixed value of 32 as the way interrupts/exceptions
are setup in x86_64's locore.S do not lend themselves to
Kconfig configuration of the vector to use.
HW-based kernel oops is now permanently on, there's no reason
to make it optional that I can see.
Default vectors for IPI and irq offload adjusted to not
collide.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
- Bring in CONFIG_X86_MMU and some related defines to
common X86 Kconfig
- Don't set ARCH_HAS_USERSPACE for intel64 yet when
X86_MMU is enabled
- Uplevel x86_mmu.c to common code
- Add logic for handling PML4 table and generating PDPTs
- move z_x86_paging_init() to common kernel_arch_func.h
- Uplevel inclusion of mmustructs.h to common x86 arch.h,
both need it for memory domain defines
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
include/sys/arch_inlines.h will contain all architecture APIs
that are used by public inline functions and macros,
with implementations deriving from include/arch/cpu.h.
kernel/include/arch_interface.h will contain everything
else, with implementations deriving from
arch/*/include/kernel_arch_func.h.
Instances of duplicate documentation for these APIs have been
removed; implementation details have been left in place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Not sure why these were formatted the way they were, but I've removed
unnecessary line breaks, embedded control characters (actual embedded
tabs, not escape sequences) and escape sequences.
No functional change.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
These inline-assembly functions are identical between IA32 and
Intel64 arches, so move them to the common arch.h file.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This function, like its cousin z_tsc_read(), can be shared between
subarches. Note: it's unclear to me if we actually need these to be
two separate functions (do we need serialization?) or if they can
be combined into one function. Add that to the to-do list.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
First "complete" version of Intel64 support for x86. Compilation of
apps for supported boards (read: up_squared) with CONFIG_X86_LONGMODE=y
is now working. Booting, device drivers, interrupts, scheduling, etc.
appear to be functioning properly. Beware that this is ALHPA quality,
not ready for production use, but the port has advanced far enough that
it's time to start working through the test suite and samples, fleshing
out any missing features, and squashing bugs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Simplified these two inline functions somewhat, and refactored them:
unlocking can be shared between subarches, but locking cannot.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The sys_inXX() and sys_read/writeXX() I/O primitives can be shared
between subarches of x86 with minor modifications, so move them.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Some of the elements of arch.h can be shared between subarches,
so put them in a common file and factor out the rest. Placeholder
left for the Intel64 definitions to be added later.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Making room for the Intel64 subarch in this tree. This header is
32-bit specific and so it's relocated, and references rewritten
to find it in its new location.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This was only enabled by the MVIC, which in turn was only used
by the Quark D2000, which has been removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The Quark D2000 is the only x86 with an MVIC, and since support for
it has been dropped, the interrupt controller is orphaned. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
These constants do not need global exposure, as they're only
referenced in the reboot API implementation. Also their names
are trimmed to fit into the X86-arch-specific namespace.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This commit adds the architecture-specific implementation
of k_float_disable() for ARM and x86.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
All architectures declare those variables the same way, no need to
define them per arch, instead put them in common. If someone deviates,
they can create their own header.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We had architectures doing this differently, some had a dedicated
sys_io.h file, some not. Unify how it is done by splitting the arch
specific sys_io implementation into a sys_io file and include it
instead.
Move bits_portable.h to arch/common and split the file so more
architecture can reuse some of the definitions here instead of
duplicating code.
Where applicable use the common sys_io/ffs definitions.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It's useful to be able to inspect the key returned from
z_arch_irq_unlock() to see if interrupts were enabled at the point
where z_arch_irq_lock() was called. Architectures tend to represent
this is a simple way that doesn't require platform assembly to
inspect.
Adds a simple test to kernel/common that validates this predicate with
a nested lock.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We do have a multi-architecture latency benchmark now, this one was x86
only, was never used or compiled in and is out-dated.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is used to have each arch canonically state how much
room in the stack object is reserved for non-thread use.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Upon hard/soft irq or exception entry/exit, handle transitions
off or onto the trampoline stack, which is the only stack that
can be used on the kernel side when the shadow page table
is active. We swap page tables when on this stack.
Adjustments to page tables are now as follows:
- Any adjustments for stack memory access now are always done
to the user page tables
- Any adjustments for memory domains are now always done to
the user page tables
- With KPTI, resetting a page now clears the present bit
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
PAE tables introduce the NX bit which is very desirable
from a security perspetive, back in 1995.
PAE tables are larger, but we are not targeting x86 memory
protection for RAM constrained devices.
Remove the old style 32-bit tables to make the x86 port
easier to maintain.
Renamed some verbosely named data structures, and fixed
incorrect number of entries for the page directory
pointer table.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The main function is just a weak function that should be override by the
applications if they need. Just adding a nop instructions to explicitly
says that this function does nothing.
MISRA-C rule 2.2
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
If dynamic interrupts are enabled, a set of trampoline stubs
are generated which transfer control to a common dynamic
interrupt handler function, which then looks up the proper
handler and parameter and then executes the interrupt.
Based on the prior x86 dynamic interrupt implementation which
was removed from the kernel some time ago, and adapted to
changes in the common interrupt handling code, build system,
and IDT generation tools.
An alternative approach could be to read the currently executing
vector out of the APIC, but this is a much slower operation.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
According with ISO/IEC 9899:1999 §6.7 Declarations, typedefs name must
be uniques.
C99 clause 6.7
MISRA-C rule 1.1
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This reverts commit 17e9d623b4.
Single thread keep introducing more issues, decided to remove the
feature completely and push any required changes for after 1.13.
See #9808
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some applications have a use case for a tiny MULTITHREADING=n build
(which lacks most of the kernel) but still want special-purpose
drivers in that mode that might need to handle interupts. This
creates a chicken and egg problem, as arch code (for obvious reasons)
runs _Cstart() with interrupts disabled, and enables them only on
switching into a newly created thread context. Zephyr does not have a
"turn interrupts on now, please" API at the architecture level.
So this creates one as an arch-specific wrapper around
_arch_irq_unlock(). It's implemented as an optional macro the arch
can define to enable this behavior, falling back to the previous
scheme (and printing a helpful message) if it doesn't find it defined.
Only ARM and x86 are enabled in this patch.
Fixes#8393
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
