* Remove driver categories that didn't have any major updates
* Add a first pass on new drivers that got added
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add list of new SoCs and ARM boards added in this release. (Folded the
STM32 board section into the ARM board section).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There is no known TFM/secure side solution for the lpcxpresso55s28.
The '_ns' board config variant was added as a copy/pasted based on
how some other boards did things. If/when TFM supports the board
we can revert this to support it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds a note on a known config conflict with mbedtls 2.26.0 and TF-M
where the mbedtls PSA APIs can no be enabled at the same time as TF-M.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
These compatibles don't match the dt-schema regular expression for
compatible properties that we'd like to support in Zephyr because they
do not begin with a letter.
Use linaro, as a vendor prefix to make them compliant. Update the
release notes since out of tree users will need to keep up.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Several functions and macros have been replaced with new ones that
conform to current naming conventions, or provide more functionality,
mostly through using new representations for delayable work. Mark
these functions deprecated.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
To keep compatibility between the old GPIO API implementation and a new
one introduced in the Zephyr 2.2.0 release the gpio_pin_configure()
function was accepting interrupt flags. In the new API implementation
interrupt flags are only accepted by gpio_pin_interrupt_configure()
function.
This temporary support for INT flags in gpio_pin_configure should have
been removed in the Zephyr 2.4.0 release.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Add a release note entry for the new Zephyr boards
supported in TF-M in Zephyr v.2.6.0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
These helper macros avoid boilerplate when constructing a gpio_dt_spec
structure from optional devicetree properties.
Update the release notes while we're here.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add an entry in the release notes regarding the
support for non-blocking secure calls in Zephyr.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Since the API already has a function to create an LwM2M object instance,
it makes sense to add a corresponding delete funtion, allowing the
application to delete created objects.
Additionally, for the remote delete set the Registration Update trigger
only when not in bootstrap mode.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This option was only able to collect statistics of transmitted
data. The same functionality is available if one sets the
CONFIG_NET_PKT_RXTIME_STATS and/or CONFIG_NET_PKT_TXTIME_STATS
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds a note about the changes made to align the error handling of
the likes of bt_l2cap_chan_send and bt_iso_chan_send.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Removing CONFIG_TRACING_CPU_STATS in favor of
CONFIG_THREAD_RUNTIME_STATS which provides per thread stats. The same
functionality is also available when Thread analyzer is enabled with the
runtime stats enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add an entry in the release notes for 2.6, indicating
that TF-M is updated to v1.3.0 release.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Clarify usage of ENOSYS vs ENOTSUP and add comment in the release notes
about the recent changes to the APIs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a note in the 2.6 release notes about configuring QEMU
to run in CI on mps2_an521_nonsecure with TF-M as the secure
firmware component.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This is a helper which allows you to skip the intricacies of instance
numbers to express the intent of "give me a random enabled node with
this compatible; I don't care which one".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Allow callers to wait for an arbitrary amount of time, instead of always
waiting for a compile-time fixed period.
Signed-off-by: Josh Gao <josh@jmgao.dev>
Kconfig option USB_HID_PROTOCOL_CODE does not allow to set
boot interface protocol code for specific HID device but
only to set the same value for all device.
Add new API function to allow the application to set
Protocol Code per device. Deprecate USB_HID_PROTOCOL_CODE option.
Fixes: #32778
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove support for counter_read and counter_get_max_relative_alarm as
they have been deprecated for at least 2 releases. As part of the
removal of counter_get_max_relative_alarm remove the code in all
counter drivers that implemented the API.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Mark all variants of the DT_DMAS_LABEL APIs:
* DT_DMAS_LABEL_BY_IDX
* DT_DMAS_LABEL_BY_NAME
* DT_INST_DMAS_LABEL_BY_IDX
* DT_INST_DMAS_LABEL_BY_NAME
As deprecated in favor of utilizing:
* DT_DMAS_CTLR_BY_IDX
* DT_DMAS_CTLR_BY_NAME
* DT_DMAS_CTLR
* DT_INST_DMAS_CTLR_BY_IDX
* DT_INST_DMAS_CTLR_BY_NAME
* DT_INST_DMAS_CTLR
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The exported structures that were originally introduced for OpenOCD have
since then been reused for other debugger plugins, including PyOCD and
Segger J-Link.
Rename the Kconfig option and the implementation from openocd to debug
thread info, so that it reflects the fact that this is no longer
specifically tied to OpenOCD.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
