People seem to miss the troubleshooting page a lot, since nobody ever
mentions that they tried its steps and they didn't work. Promote it to
a top level page to make it easier to see. Add cross-references
between the two to keep them well linked together.
Add a couple of extra links to the bindings related HOWTO while we are
here, now that the bindings docs are a bit better off than they were
when this content was originally written.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
List of the changes:
* update info about ARCv3 HS6x which support has been upstreamed
recently
* mark HS3x userspace support as Y
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add compatibility mode with old sam-ba flash bootloaders that don't have
offset capabilities. These bootloaders flash to a pre-defined flash
region. At end, bossac will suppress --offset parameter.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
when generating a new map, set the status of the device and whether it
is connected or now. The available key is runtime only and is not part
of the map anymore.
Adapt documentation and remove available as a key in the generated map.
Fixes#35341
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to document the error codes, introduce a new reference section
describing the C standard library options available in Zephyr, along
with the definitions of the error codes.
At the same time move (most of) the content from the existing user guide
to the new API reference section, removing the need for a separate user
guide for it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There was a restriction that KERNEL_VM_OFFSET must equal to
SRAM_OFFSET so that page directory pointer (PDP) or page
directory (PD) can be reused. This is not very practical in
real world due to various hardware designs, especially those
where SRAM is not aligned to PDP or PD. So rework those bits.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Just a bit of future-proofing so we can continue to link to the right
place in case we ever want to move the /zephyr,user docs out of the
'inferred bindings' section in the DT guide.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
There is a choice to log btmon logs over UART or RTT.
You can choose number of RTT buffer, set its name and size.
Replaced CONFIG_BT_DEBUG_MONITOR with CONFIG_BT_DEBUG_MONITOR_UART
for UART usage and CONFIG_BT_DEBUG_MONITOR_RTT for RTT.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Since Pygments 2.7.0 devicetree syntax is supported, so there is no need
to use a custom lexer. Version 2.9.0 introduces a fix that is required
for some devicetree snippets.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
1. Add a class of Pytest(Harness) which can handle pytest script
in harness.py
2. Use running_dir to store current test directory which be
used in pytest scrpt.
3. Add usage of this feature into zephyr doc.
Signed-off-by: YouhuaX Zhu <youhuax.zhu@intel.com>
This is mainly a feature release which includes a few ways to speed up
'west update', along with a couple of fixes and other changes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
For non-specified archs, including those out-of-tree, the possibility to
use a specific implementation has been reintroduced.
CONFIG_ATOMIC_OPERATIONS_ARCH must be selected to utilize this.
Signed-off-by: Tommie Skriver <tosk@demant.com>
This adds the bits to the gen_mmu.py script so that extra mappings
can be added with caching disabled. This is useful for mapping
MMIO regions where caching is not desired.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The binding-template.yaml file has grown organically into something
that's out of control.
It makes too many 'see above' and 'see below' references to be read
comfortably, and we can't cross reference from YAML.
There are also many example DTS and YAML fragments scattered about in
comments, which cannot be syntax highlighted properly.
Fix that by overhauling the documentation into bindings.rst in the DT
guide. This will let us link to individual sections when answering
questions, allows us to cross-reference and use '.. code-block::',
etc.
A couple of things need to go to other pages.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Break it down in a table based on each supported type in the bindings
language and add cross-references.
Move the section higher up, to make it easier to find.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Improve the existing documentation by showing explicitly how to access
all of the properties in the example /zephyr,user node. This makes
use of the new DT_FOREACH_PROP_ELEM() macro in particular.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
No reason why we are duplicating this information in a standalone guide
when we already talk about env variables in the application developer
guide.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removing CONFIG_TRACING_CPU_STATS in favor of
CONFIG_THREAD_RUNTIME_STATS which provides per thread stats. The same
functionality is also available when Thread analyzer is enabled with the
runtime stats enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added net-capture.py script to net-tools project. The script
can be used to view and save the captured network traffic to
pcap file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
``arduino-header-r3`` was incorrectly referred to as
``arduino-r3-header``.
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
Clarify usage of ENOSYS vs ENOTSUP and add comment in the release notes
about the recent changes to the APIs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The net_capture API documentation was not referenced by
network documentation so the API reference documentation
was not generated for it. This commit adds links to the
net_capture API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add information to documentation how to monitor and capture
received and sent network traffic.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This adds to page on the x86 virtual memory about how to specify
extra page table mappings during build.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
As per the agreements in the Process Group Meeting, rework the procedure
to include external code so that it reflects the reality of Zehyr today
with the choice between modules and integration into the main tree, and
decouple the non-Apache v2.0 license side of the question from the
process from importing 3rd-party code.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The only user of arch_mem_domain_destroy was the deprecated
k_mem_domain_destroy function which has now been removed. So remove
arch_mem_domain_destroy as well.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Although a project's default revision is still "master", we can change
some examples around to refer to "main" branches instead, in keeping
with the changes we're making for Zephyr more generally.
We cannot change the default project revision away from "master" in
west v0.10.x, because that would be a schema change. That will have to
wait for v0.11.0.
However, in the meantime, we are making some inclusive language
changes related to 'west init', because the --mr option is not
governed by a schema. These will be documented in the next commit.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Nothing in the tree is using the "passlist" term in the "blocklist /
passlist" pair. However, west is using "blocklist / allowlist" already
in a released version.
Recommend blocklist/allowlist instead of blocklist/passlist to avoid
having to add yet another possible replacement, since nothing is using
passlist right now.
Note that blocklist/allowlist is in widespread use throughout many
projects, including Chrome.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Adjust these for 0.10. This version parses differently as a string vs.
as a float. Document that quoting the value avoids the issue. Make
some other adjustments and improvements for clarity.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
