Since the recent OpenThread update, OT needs more stack to initialize,
therefore bump the stack size in samples using OpenThread.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Convert the can_mode enum to a bit field to prepare for future extensions
(CAN-FD mode, transmitter delay compensation, one-shot mode, 3-samples
mode, ...).
Rename the existing modes:
- CAN_NORMAL_MODE -> CAN_MODE_NORMAL
- CAN_SILENT_MODE -> CAN_MODE_LISTENONLY
- CAN_LOOPBACK_MODE -> CAN_MODE_LOOPBACK
These mode names align with the Linux naming for CAN control modes.
The old CAN_SILENT_LOOPBACK_MODE can be set with the bitmask
(CAN_MODE_LISTENONLY | CAN_MODE_LOOPBACK).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove ESP32 and ESP32S2 from not working samples
and tests. Reason for not working is not enough memory
space in RAM to execute it. This can be worked out as next steps.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With LwM2M v1.1 SenML CBOR is preferred over SenML JSON.
TLV is on by default only with v1.0.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Makes possible to enable LwM2M protocol v1.1 features. Uses SenML JSON
as default content format.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Changes console blocks in hello_world and magic_wand tflite-micro
samples to Kconfig blocks to match content. Fixes typos in
some networking samples so that code blocks display instead
of being hidden. Fixes path to litex-vexriscv-tflite.resc.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Add loopback mode config to the sample so that the code
can be tested without an actual CAN network, but wit a
single board.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Until now the whole USB device stack code is located
in the top subsys/usb directory. Move it to own directory
in preparation for upcoming extension and rework of USB support.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Some names of the test cases are duplicated within the project.
This commit contains the proposed names of the test scenarios.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
- strtoll() and strtoull() are copies of strtol() and strtoul() with
types changed to long long instead of long.
- added tests
- added documentation
- removed stubs from civetweb sample
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
The gsm modem should be able to be started or stopped freely,
independent from the networking state.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The `starting` flag causes the sample to work only if
GSM_PPP_AUTOSTART is enabled, its initial value should be
dependent on GSM_PPP_AUTOSTART.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
As the receive window is now decreased at the TCP module level, other
direct net_context users are also responsible for acknowledging the
received data with net_context_update_recv_wnd() - otherwise, the
communication will stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Kconfig options now belong to the Kconfig domain, therefore, the
:kconfig:option: role needs to be used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Filter out the remaining CAN tests if no zephyr,canbus chosen node is
enabled in the devicetree.
- Rename the tests to shorten the name a bit.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Register modem power callbacks to show how it can be
used to provide e.g modem power on and off sequences.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
In applications where timing is critical it seems like enabling
deferred log mode could be desirable.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Co-authored-by: Seb Laveze <sebastien.laveze@nxp.com>
Signed-off-by: Xabier Marquiegui <xmarquiegui@ainguraiiot.com>
A common pattern here was to take the work item as the subfield of a
containing object. But the contained field is not a k_work, it's a
k_work_delayable.
Things were working only because the work field was first, so the
pointers had the same value. Do things right and fix things to
produce correct code if/when that field ever moves within delayable.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Disable Ethernet on SocketCAN sample because some Ethernet
drivers cannot operate on such small buffers.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
It is documented as unsigned in
samples/net/sockets/big_http_download/Kconfig
Signed overflow is undefined behavior, unsigned is not. This fixes the
following warning:
-Wstrict-overflow=1
samples/net/sockets/big_http_download/src/big_http_download.c:346:2:
In function 'main':
error: iteration 2147483648 invokes undefined behavior
[-Werror=aggressive-loop-optimizations]
346 | } while (--num_iterations != 0);
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Avoid endless loop in `case MQTT_EVT_PUBLISH`
Fail on any error for mqtt_read_publish_payload_blocking, inc. -EAGAIN.
Fixes zephyrproject-rtos#40965
Signed-off-by: Jeffrey Urban <jeffrey@jeffreyurban.com>
The sample did not specify any tests in its sample.yaml file, causing CI
failures.
Additionally, the sample requires to generate secure key before building
the sample, otherwise the build fails. For the CI needs, specify a dummy
test key, which is only included if the build was triggered by Twister.
For this, specify a USE_DUMMY_KEY variable in the sample.yaml file.
Finally, fix some minor build issues in the sample itself - remove
unused variable, and remove deleted (and also unneeded) mbed TLS header
inclusion.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Many documents relied on single quotes to create references, e.g.
`my_reference`. This is possible because `default_role = "any"` is
enabled in Sphinx conf.py. However, this method comes with its problems:
- It mixes all domains together, so it's not clear to what are you
referencing: a document? a Kconfig option? a C function?...
- It creates inconsistencies: in some places explicit roles are used
(e.g. :ref:`my_page`) while in some others not.
- _Conflictis_ with markdown. Single quotes are used for literals in
Markdown, so people tend to use the same syntax in Sphinx, even though
it has a different purpose.
Usages have been found using `git grep ' `[^`]*` ' -- **/*.rst`.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace deprecated macro USBD_CFG_DATA_DEFINE by
USBD_DEFINE_CFG_DATA which places usb_cfg_data structures
in specific iterable section.
Replace __usb_data_start, __usb_data_end usage patterns
size_t size = (__usb_data_end - __usb_data_start);
for (size_t i = 0; i < size; i++) {...}
by
STRUCT_SECTION_FOREACH(usb_cfg_data, ...) {...}
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The gsm_ppp.h is currently in include/drivers/modem directory
so change the path accordingly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The sample oversimplified the observe mechanism a bit - instead of
making use of CoAP APIs to verify the packets received (if they are
actually notifications for the observe) it blindly assumed that any
received packet was a notification. This could be misleading for
potential users of the CoAP library, as the sample had little use as
a reference for the Observer functionality.
Fix this by making use of `coap_reply` structure and a corresponding
`coap_response_received()` function.
Additionally, make the observe cancellation compliant with the CoAP
specification - it should be either an empty Reset message, or a GET
request with Observe option set to 1. The sample used invalid
construct of a Reset message with Observe option. For the purpose of
the sample, use the latter option.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The sample intended to send an empty ACK for the notification message
(response code equal to 0), yet it included a token in the ACK reply
(which is not correct for an empty ACK).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for both Observe cancellation methods - empty Reset reply
(in place of ACK) and GET message with Observe option set to 1.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The documentation of the sample refers IPv6 instead of IPv4.
Additionally, the coexisting coap_client sample also uses IPv6 by
default. Therefore, switch the sample default configuration to use IPv6
instead of IPv4.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Arduino compatible boards should have a working UART on pin 0 & 1.
On frdm_k64f this is handled by uart3
Unfortunately pinmuxing of uart3 was destroyed when enabling NETWORKING,
because the uart3 RX/TX pins was reconfigured for 1588 timers.
1588 timers are enabled by the enet child node, ptp which by some reason
is enabled by default.
1588 timers aren't needed in most cases when ethernet is being used,
so this fix ensures ptp is by default disabled. Likewise pinmuxing of
the 1588 timer functionality is now dependant of ptp being active
Signed-off-by: Kim Bøndergaard <kim.boendergaard@escoglobal.com>
The supported protocol must be delivered to the firmware update object
as optional, then configured in the application.
This information is device/server dependent so does not can be fixed
in library.
Signed-off-by: Jair Jack <jack@icatorze.com.br>
Replace unpacked in6_addr structures with raw buffers in net_ipv6_hdr
struct, to prevent compiler warnings about unaligned access.
Remove __packed parameter from `struct net_6lo_context` since the
structure isn't really serialized.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
