The stm32f207 and stm32f429 target boards only have 4 bidir EP
on the USB FS node. This is not enough to run the sample:
simply exclude those 2 target platforms
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The "virtio_" prefix is used by the open-amp library API.
Rename local functions using "ipc_virtio_" prefix to avoid
function redefinition.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Add overlay configuration for native_sim, and enable it
for this platform in the test yaml filter.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The "virtio_" prefix is used by the open-amp library API.
Rename local functions using "ipc_virtio_" prefix to avoid
function redefinition.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Use the ISO Data sent callback in iso_broadcast sample to
synchronize the ISO data send. ISO Data sent callback is
generated every SDU interval corresponding to the number of
completed packets event generated by the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Patch to rename struct bt_ots_init to struct bt_ots_init_param
to avoid duplicating the name bt_ots_init.
Fix for issue#45968
Signed-off-by: Jai Arora <infolinesoni@gmail.com>
Rename the bt_codec struct to bt_audio_codec_conf or
to the new struct bt_audio_codec_cap.
Rename the bt_codec_data to bt_audio_codec_data.
The purpose of this is to split the codec specific configuration
and codec capabilities into seperate structs, as they do not
reflect the same values, or used for the same purpose.
This commit depends on the preset macros workings on either
type of struct (for now), but will be modified in future updates.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This fixes metadata length checks for BT_AUDIO_METADATA_TYPE_EXTENDED
and BT_AUDIO_METADATA_TYPE_VENDOR that should be at least 2 bytes long.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The CCID list can be empty, as the Assigned Numbers is not strict
regarding it's minimum length.
Fixes: #59666
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
1. Add atcwdt200 options for WDT_NODE in testcase.
2. Add the board overlay file in wdt sample to specify
the watchdog0 alias
Signed-off-by: Kevin Wang <kevinwang821020@google.com>
Restore back BT_CTLR_ISO_TX_BUFFER_SIZE to 251 after fix in
commit e460847b60 ("Bluetooth: host: don't fragment ISO
if len <= MTU").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Rx Prio thread stack usage value to Kconfig default
value. After long duration use of hci_rpmsg in audio
application, remaining stack was 80 bytes, hence increase
back to 448 as set in the Kconfig defaults.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a config "fixture_auxdisplay" to make the samples/drivers/auxdisplay
runnable on a platform, else the application is useless
This fixture will differ from the existing "fixture_display"
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Currently, it is not possible to use hawkbit with code that requires
POSIX_API to be set due to the dependency on NET_SOCKETS_POSIX_NAMES.
Since a lot of other code has already been moved to `zsock_`, this
commit does the same for hawkbit.
Co-authored-by: rojedag <r.ojeda@vogl-electronic.com>
Signed-off-by: Matthias Breithaupt <m.breithaupt@vogl-electronic.com>
As per table 4.2 in BAP v1.0.1, the BAP unicast client shall
support at least 2 (> 1) endpoints in either direction if it
supports that direction.
Since Kconfig does not support such requirements (0 || > 1),
this is done using a BUILD_ASSERT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for using X509 certificates.
Default settings use ECDSA certificates with SHA256 hash.
When different settings are required clients should overwrite
struct lwm2m_ctx->load_credentials() and
struct lwm2m_ctx->set_socketoptions()
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The CONFIG_PLATFORM_SPECIFIC_INIT is ARM specific, so move this to
board config file, rather than project config.
It should be no restriction to run the openamp_rsc_table sample on other,
non-arm, platforms.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
This enables the samples/drivers/spi_flash on quad-spi flash
to run on any stm32 target with external NOR quad flash.
The SPI_FLASH_MULTI_SECTOR_TEST test case is possible with
quadspi too.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds the support jedec configuration to run
the jedec sample application. So target board can display
the content of the quad-NOR flash.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The LittleFS sample may be used for both SDMMC and MMC disk drivers,
so make it possible to work with different volume disk driver names.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Add support for communication with serial ports on native POSIX platform
via UART driver API. Serial port driver supports polling API,
configuration of the serial ports used via devicetree and command line
options, and runtime configuration with `uart_configure`.
Multiple instances of the driver are supported.
Example use and configuration is also demonstrated in the
`samples/drivers/uart/native_tty` sample.
Closes: #56586
Signed-off-by: Marko Sagadin <marko.sagadin42@gmail.com>
Add DeviceAbstract class to default imports from pytest-twister-harness
package to simplify importing DUT package, when creating tests.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This PR adds ability to build mesh with tf-m psa
for platforms those support tf-m.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
websocket_disconnect api does not closes user tcp socket, so tcp socket
must be closed after done.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
The BLE backend has a bug that when the MTU size is less than
the buffer the notification always fails and does not allow
to flush the buffer.
This fix checks for the MTU size of the current connection
and adjusts it. In addition, the buffer size is no longer
settable by the user and depends on the transmission size
of MTU set with CONFIG_BT_L2CAP_TX_MTU.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
The method ieee802154_radio_handle_ack() does not belong to the
PHY/radio layer but to the L2 layer. It is a callback called from the
radio layer into the L2 layer and to be implemented by all L2 stacks.
This is the same pattern as is used for ieee802154_init(). The
'_radio_' infix in this function is therefore confusing and
conceptually wrong.
This change fixes the naming inconsistency and extensively documents
its rationale.
It is assumed that the change can be made without prior deprecation of the
existing method as in the rare cases where users have implemented custom
radio drivers these will break in obvious ways and can easily be fixed.
Nevertheless such a rename would not be justified on its own if it were
not for an important conceptual reason:
The renamed function represents a generic "inversion-of-control" pattern
which will become important in the TSCH context: It allows for clean
separation of concerns between the PHY/radio driver layer and the
MAC/L2 layer even in situations where the radio driver needs to be
involved for performance or deterministic timing reasons. This
"inversion-of-control" pattern can be applied to negotiate timing
sensitive reception and transmission windows, it let's the L2 layer
deterministically timestamp information elements just-in-time with
internal radio timer counter values, etc.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Add optional trigger support to sample. If the selected temperature
sensor supports triggering using the AMBIENT_TEMP channel, then
temperature thresholds will be set for +0.5 and +1.5 degrees celsius
above ambient temperature. Sample overlays are provided for the
FRDM_K22F board to demonstrate enabling this feature.
Signed-off-by: Daniel DeGrasse <daniel@degrasse.com>
Set flash location for CM4 to ocram, so CONFIG_FLASH_BASE_ADDRESS is
set correctly.
Fixes#59213
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit replaces the workarounds spread around the
drivers and subsystems with the updated PPP L2
interface.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
A mesh key type has been added to be able to choose the different
key representation for different security libraries.
The type as well as some functionality related to Mesh key
management has been added as a public API.
If tynicrypt is chosen then keys have representation
as 16 bytes array. If mbedTLS with PSA is used then keys are
the PSA key id. Raw value is not kept within BLE Mesh stack
for mbedTLS. Keys are imported into the security library
and key ids are gotten back. This refactoring has been done
for the network(including all derivated keys), application,
device, and session keys.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This test fails when using picolibc with the default malloc arena
value. Fix this by explicitly setting the malloc arena size to zero, as
when using the minimal C library.
Signed-off-by: Keith Packard <keithp@keithp.com>
This conflicts with what the compiler expects for the definition of 'main'
when -ffreestanding is not used.
Signed-off-by: Keith Packard <keithp@keithp.com>
