Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Core Vol 3, Part G, Section 5.3.2 Channel Requirements states that
"The channel shall be encrypted". It does not mention any additional
security requirements that can be specified bt higher layer profiles.
This enables link encryption requirement for EATT channel.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add an assume API which works like JUnit's. Assumptions can be made
at any point before your test returns (setup, before, and during the
test). If an assumption fails, the test will be marked as skipped.
This helps avoid a cascading affect of failed tests when a base
feature breaks. The feature is expected to have tests and the tests
which depend on it should be skipped (not failed) if that feature
is broken.
Issue #42472
Signed-off-by: Yuval Peress <peress@google.com>
Running the testcase dac loopback on the nucleo_g071rb
target board.
The ADC1 in0 on PA0 (pin A0), the DAC1 out1 on PA4 (pin A2)
must be connected on the HW.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This test was merged before having re-run CI, and some logging API
changes had happened since CI was last run.
Adapt to those to fix the build.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Picolibc enables TLS, which causes relocation errors with some of these
tests without changing the compiler code model.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add option to Kconfig to enable log_output module. It is used
by most of the backends but it is an optional formatter helper
thus it is possible to run logging without it. One example might
be dictionary based logging which does not format log message
to a readable string.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit adds a test case that configures an alternative clock source
for an ADC peripheral.
In case no alt clock is available, only the gating clock is enabled
and disabled.
Unlike the i2c and lptim test, the actual gating clock frequency is
not checked, because for the adc there seems to be no uniform way
to retrieve the frequency via the hal.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
For the STM32G0, STM32G4, and STM32WL enable the adc node in one
configuration, and select the PLL_P output as its clock source.
PLL_P divider is chosen to be 20 to make sure it's a unique frequency.
- g0, and g4 have pll as sysclk
- wl has hse as sysclock
The test configurations and the overlay-files are renamed accordingly.
All overlays that don't specify an alternative clock source still
make sure that the adc node is "okay" to be able to perform basic test.
The basic test only turns on and off the gate clock without checking the
frequency.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The test checks if the peripheral gating clock was correctly disabled
after the test, but accidentally the I2C_CLK was checked instead of the
LPTIM_CLK.
This commit fixes this by using __HAL_RCC_LPTIM1_IS_CLK_ENABLED instead.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The nucleo_wl55jc according to the datasheet does have a
NT2016SF-32M-END5875A 32MHz TCXO as HSE, therefore needs
enable the "hse-tcxo;" property to work, this was not the case
for the clock_configuration/stm32_common_devices test cases.
Additionally, remove the comment about about ST-Link clock,
because the source is the tcxo and not the ST-Link.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
If struct tx_structure is too large than the buffer that
expected_dut_to_host references, leading the compiler to generate a warning
about the possibility of buffer overflow.
Leave out the 'struct ec_response_too_big' so that 'struct tx_structure'
fits within the 256 byte buffer.
This was caught when using GCC 11.3.0 building the test for native_posix.
Signed-off-by: Keith Packard <keithp@keithp.com>
uart_async test and spi_loopback test require UART and SPI
with an ASYNC option.
The SAM0 UART/SPI driver requires configuring DMA support.
Arduino MKRZero is not DMA configured like other SAM0 boards.
We exclude it from the tests.
ea36f9b and f4c5bdf already exclude other SAM0 boards from these tests.
Arduino MKRZero also followed these PR policies.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
The HAS depends on the unicast server, and should be
disabled in the `no_unicast_server` as well as depend
on the CONFIG_BT_AUDIO_UNICAST_SERVER config.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for using PACS and/or capabilities for
the broadcast sink role. PACS and capabilities were
originally only supported for the unicast server
role, so the PACS callbacks were moved their own
struct, as if a device supports both the unicast
server role and the broadcast sink role, it will
only have a single PACS instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add stress test for logging to validate that logging is coherent:
All message are processed by the logger or dropped and no message
is lost.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Updated log_core to use spin lock instead of irq_lock.
Refactored z_log_msg_post_finalize function.
Update thresholds in the log_stack test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Changes:
- Copied over board files for blackpill_f401ce
- Changed appropriate soc dtsi from stm32f401Xe.dtsi to stm32f401Xc.dtsi
- Replaced any instance of F401CE to F401CC
- Added blackpill_401cc to adc test
In essense the blackpill_f401ce and blackpill_f401cc are the exact
same boards,
the f401cc variant of the stm32 mcu has lesser sram and flash than
the f401ce.
Signed-off-by: Sahaj Sarup <sahaj.sarup@linaro.org>
Add disk performance test, to report performance of disk devices. This
test reports performance for single sector R/W, sequential read/writes,
and an IOPS score based on random 512 byte reads and writes.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Rename disk driver test to disk_access, as multiple disk tests exist.
Disk access test is intended to verify disk functionality.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
lwm2m: Regenerate lwm2m_senml code from the CDDL description.
Reapply manual changes.
Create a sh script to perform the regeneration.
tests: zcbor_bulk: Adapt to zcbor 0.5.1
zcbor_new_decode_state() now has no return value.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
As Zephyr currently requires CMake version 3.20.0, update all
occurrences of cmake_minimum_required.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Close the flash_area at the end of individual tests to demonstrate
correct usage of the API.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Remove all usage of `device_get_binding` in the subsys by directly
storing the `const struct device*` in the `struct flash_area`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
