The codec (or rather codec configuration) is now taken from the
previously received BASE. This also means that the BASE (with
the codec configurations) is now also stored statically.
When the application attempts to synk to the broadcaster
the stack will lookup the codec configuration based on the
bis index, as a BASE may have multiple subgroups
with multiple codec configurations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The shell module will now use BT_AUDIO_CONTEXT_TYPE_ANY
instead of BT_AUDIO_CONTEXT_TYPE_UNSPECIFIED as that provides
a more flexible solution.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some functions are only used for the unicast server
but was guarded by CONFIG_BT_AUDIO_UNICAST instead of
CONFIG_BT_AUDIO_UNICAST_SERVER.
Some parts of the unicast-server-only code also had
client specific code that would never be called.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for using PACS and/or capabilities for
the broadcast sink role. PACS and capabilities were
originally only supported for the unicast server
role, so the PACS callbacks were moved their own
struct, as if a device supports both the unicast
server role and the broadcast sink role, it will
only have a single PACS instance.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This handles Write Preset Name operation that is used to change the
preset name. This covers as well changing the preset name by server.
Fixes: HAS/SR/CP/BV-04-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The BT_CODEC_LC3_CONFIG_* macros had a hardcoded location
and context, which makes them a lot less usable.
Updates the macro, and the macros that used them.
This also removes the BT_CODEC_LC3_CONFIG and instead
just uses the BT_CODEC_LC3_CONFIG_N macro, which has
then been renamed to BT_CODEC_LC3_CONFIG.
As an addition, the macros and their input has
also been better documented.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The iso_rx_qos is only used for unicast audio, as
we do not set the RX QOS for the broadcast sink, nor
can a broadcast source set RX QOS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
the CSIS client now has a ordered access procedure function.
The function implements the procedure as per the CSIP spec,
where it will verify that 1 or more members are unlocked,
and the execture a procedure on each member in ascending
order of rank.
The procedure can be anything (even a non-BT procedure),
and it will be up to the applicaiton to implement
what to do in that.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Having the members array being const causes a lot of
limitations in the implementatation, and was
occasionally even disregarded. Removed to make the
implementation more flexible.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The `iso_qos` was only used for connected ISO, but
was placed outside of the CONFIG_BT_ISO_UNICAST
guard, such that for broadcast ISO-only it was unused.
Move the declaration and renamed to cis_iso_qos.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This function retrieves TX sync information
(timestamp, offset, and sequence number)
from controller using HCI command HCI_LE_Read_ISO_TX_Sync.
Signed-off-by: Audun Korneliussen <audun.korneliussen@nordicsemi.no>
Makes it possible for an application to
handle CSIS RSI advertising by registering a
callback, which will disable the internal
CSIS advertising.
Also fixes registering callbacks in CSIS.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
Rename the BT_ISO_INTERVAL_MIN/MAX to
BT_ISO_SDU_INTERVAL_MIN/MAX to avoid confusing this
the the ISO interval which is different from the SDU
interval.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add two new parameters to bt_iso_chan_send:
sn: The packet sequence number which shall be incremeted
per SDU interval.
ts: An optional timestamp value used to synchronize SDUs.
The sequence number in the API uses a 32-bit value even though
the sequence number for the HCI command is 16-bit. This is to
properly handle wrapping of sequence numbers, which is much
easier to do with additional bits allocated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The "iso connect" now also takes a security level option like
"iso listen", so that the central can easily encrypt
and connect a CIS in a single command.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The ISO security implementation works by verifying
against the acl (bt_conn) sec_level field. The
bt_conn sec_level field is only available
if CONFIG_BT_SMP is enabled, so this commit
adds guards for all ISO security checks as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Enable HAS shell only if preset support is enabled. Otherwise there are
no functions yet that can be exposed if the preset support is disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The bluetooth ISO shell module now supports the newly
added central and peripheral ISO configs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The audio stream receive callback now contains a
recv_info struct, which contain crucial information
such as timestamps and packet validity.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The values represent an enum, and it makes sense for the
enum values to follow the enum type name, so an
_DIR_ infix was added to the values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Many functions and struct fields had the directory/type
value, but named in different ways and stored in different ways.
This change updates all uses of it to use the same name
and type.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The enum bt_audio_pac_type does not fully
represent the what the value is used for.
The typical use of it is not for just published
audio capabilities (PAC), but rather describes the
type, or direction, of audio endpoints.
For the unicast client, the type/direction is
relative to the unicast server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Change bt_audio_broadcast_sink_sync to use an array of pointers
to bt_audio_streams, instead of an array of streams. This makes
the API more flexible, as well consistent with the broadcast
source and unicast APIs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bt_audio_broadcast_source_create function will now
take an array of stream pointers, instead of an array
of streams. This is to make the API more flexible as
well as more consistent with the unicast API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In bt_audio_unicast_group_create, bt_audio_unicast_group_add_streams
and bt_audio_unicast_group_remove_streams to use an array
of pointers, instead of an array of streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Changes the media_proxy API to pass structs by reference instead of by
value.
Also pass structs by reference in internal functions in media player
and in media controller test.
Add pointer checks to the public API implementation where
user/application code provides structs by reference.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Changes the media control client API to pass structs by reference
instead of by value.
Also change internals of test to pass struct by reference.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Making sure struct bt_l2cap_chan has absolutely no members related
to dynamic channels.
That way we ensure that there is no overhead for a build where only
fixed channels are used.
It's not enough that the dynamic channel-related members are put behind
ifdefs - they should be completely moved out from the struct definition.
Furthermore, the public l2cap.h header file already has a struct
that's meant to be used for dynamic channels: struct bt_l2cap_le_chan!
However, currently dynamic channel support is a mess - it's a mix
between these two structs. The bt_l2cap_le_chan struct should really
be an extension of the bt_l2cap_chan struct, i.e. the former should
contain as a member the latter.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Add a new callback structure for Bluetooth authentication
This struct is meant to replace the information-only
callbacks in bt_conn_auth_cb. The reason for this is that
due to the nature of bt_conn_auth_cb, it can only be registered
once. To allow mulitple users gain information about pairing
and bond deletions, this new struct is needed.
Samples, tests, etc. are updated to use the new struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The ARRAY_SIZE macro uses sizeof and thus the return
type should be an unsigned value. size_t is typically
the type used for sizeof and fits well for the
ARRAY_SIZE macro as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Separate out the Kconfig for the media player.
Also removes some unused MCS configs.
The media player has been using MCS configs, while it should be the
other way around.
Also, this will make it easier to move the media player elsewhere, as
has been discussed.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
